June - Parcel 03 & 05 Sign Mark
June - Parcel 03 & 05 Sign Mark
2.4.217 Note (Note: LED strip lighting is not included and covered else where under Lighting Fixture BoQ )
2.4.218 Note the item including but not limited to : compacted subgrade, formwork, reinforced concrete, plain concrete, plaster, paint, plaster stop, fastening in place, galvanized steel work, an
2.4.219 Note accessories for fixation,
Protection work drainage
to protect gravel wrapped
the waterproofing, bywork,
block 300 gm/m2
openingnon-woven geotextile
for recessed lighting filtration
fixtures, layer, perforated
materials, testingpipes (to be coordinated
of proposed withsheet,
material, data the infrastructure
labors, tools,engineer),
equipment,4 mm Th
work
2.4.220 Note drawings,
(Note: profit,
lighting taxes,
fixture overheads
and and not
handrail are all works required
included to meet specs,
and measured drawings
else where and
under any other
division 5 & materials
16) or works required for the proper installation.., etc.
2.4.221 Division 2 SITE CONSTRUCTION
2.4.222 Section 02800 Site Improvement
2.4.223 19 Furnish and install outdoor BBQ station, type (BA-01) with clay tiles cladding, stainless steel accessories, granite counter top with light beige color, and an attached seat made fro
2.4.224 Note teak item
The (iroko wood),
shall all supported
include on reinforced concrete footing, R.C footing set on 400 micron HDPE, set on 100 mm thick. plain concrete, set on compacted subgrade, All as per d
the following:
2.4.225 Note * Masonary work related to the structure of the station
2.4.226 Note * 150mm thick. Clay tiles cladding
2.4.227 Note * Stainless steel charcoal - ash pan
2.4.228 Note * Stainless steel grill grate
2.4.229 Note * Galvanized steel angles
2.4.230 Note * Granite capping
2.4.231 Note * Reinforced concrete base, set on plain concrete, set on compacted subgrade.
2.4.232 Note * Waterproofing membrane & protection work.
2.4.233 Note * 400 micron HDPE waterproofing membrane
2.4.234 Note The item shall include but not limited to all materials, formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, waterproofing, protection works, weather resista
2.4.235 Note electrostaticand
overheads paint, galvanized steel
all accessories work, stainless
for fixation, all workssteel work,tomechanical
required fixations, drawings,
meet specifications, anchors, angles,
all worksplates, chain,
required shackle,
to meet cleat, webbing,
specifications, bracket,
drawings, anddowels, HDPE,
any other connection
materials sy
or works
الرمز proper installation. وحدة القياس الكمية
الوصف
2.4.236 19.1 Outdoor BBQ station, type (BA-01) NUMBER 5
مالحظة
2.4.237 Division 2 SITE CONSTRUCTION
2.4.238 Section 02800 Site Improvement
2.4.239 20 Supply, Cast, and install outdoor Shower Unit (Type: SH-01),
2.4.240 Note w./ dimension
(The as per drawing
below quantities ,as(6)
are for Six shown on shower
unit for detail 10,11,H,I/ LA-JU-P03-DT-01
unit (Type: SH-01) and structure detail # LA-JU-P03-ST-DT-02 (Gruhe)
2.4.241 Note The item shall include the following:
2.4.242 Note Structrure Work:
الرمز الوصف وحدة القياس الكمية
2.4.250 Note * Stainless steel gully outlet & fixture embedded into concrete baunch & to be NUMBER 6
2.4.251 Note coordinated with infrastructure engineer.
* Outdoor shower AQUATICA GAMMA - 520 by AQUATICA freestanding outdoor NUMBER 12
مالحظة stainless steel shower RAL 316L
2.4.252 Note WALL FINISHES:
الرمز الوصف وحدة القياس الكمية
2.4.253 Note * 200mm width x 40mm thick. Golden coast marble capping w./ beige color & METRE 41
2.4.254 Note antique finish , supported on reinforced concrete wall
* 20mm thick. Cement plaster including plaster stop. by stainless steel dowels & METRE SQUARE 55
2.4.255 Note * Acrylic paint, to match adjacent building color. METRE SQUARE 55
2.4.256 Note * 50mm x 50mm x 3mm thick. Anti slipt mosaic tiles for internal wall finish , METRE SQUARE 46
مالحظة w./ 3 shades of blue color fixed to wall w. adhesive
2.4.257 Note FLOORING FINISHES:
الرمز الوصف وحدة القياس الكمية
2.4.258 Note * 40mm thick. Granite elsherka slabs w./ gray color & flamed finish , METRE SQUARE 32
مالحظة set on 20mm thick. High strength latex mortar bed
2.4.259 Note The item shall include but not limited to; compacted subgrade, formwork, reinforced concrete, plain concrete, plaster, paint, plaster stop, stone work, mosaic tiles, fastening in place
2.4.260 Note steel work, stainless
cementitious steel work,
waterproofing, 400 anchors, bolts,waterproofing
micron HDPE all accessoriesmembrane,
for fixation,protection
all works work
required to meet
to protect specifications,
the waterproofing,drawings
, graniteand any other materials
works,special or works
pieces shower required
sets, fixing, for the pro
mortar, gro
2.4.261 Division 2 joint, joint
SITE sealant, filler, backer rod, stainless steel dowels, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, and any other ma
CONSTRUCTION
2.4.262 Section 02820 Fences and Gates:
2.4.263 21 Supply and install maintenance gate Type (GA-01), w./ width 900mm, as shown on detail 07/LA-JU-P03-DT-05
2.4.264 Note The item shall include the following:
2.4.265 Note * 50mm galvanized steel frame w./ polyurethane paint RAL. 7040
2.4.266 Note *fixed to galvanized
3.2mm steel post by
diameter galvanized galvanized
steel steel hinges
wires , w./316 grade
2.4.267 Note * heavy duty stainless steel slide bolt gate latch , w./ silver color
2.4.268 Note * Galvanized steel hinges w./ polyurethane paint RAL. 7040
2.4.269 Note Including but not limited to:
2.4.270 Note The item shall include but not limited to all materials, workman-ship, shop-drawings, galvanized steel work, stainless steel work, paint, bolts, winder,labors, tools, equipment, profit,
الرمز overheads, all accessories required for fixation, connection, plates, anchors, nuts, fixing, fastening toوحدة
القياس in place, all works required to meet specifications, drawings, and any other m
الكمية
الوصف
2.4.271 21.1 Maintenance gate Type (GA-01) NUMBER 7
مالحظة
2.4.272 22 Supply and install civil works for maintenance gate Type (GA-01),
2.4.273 Note w./ width 900mm,
Including as shown
but not limited to: on detail 07/LA-JU-P03-DT-05
2.4.274 Note The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, material, waterproofing including protection work, labors, too
الرمز profit, taxes, overheads, all works required to meet specifications, drawings, and any other materials or works required for the proper الكمية
وحدة القياس installation.
الوصف
2.4.275 22.1 Civil works for Maintenance gate Type (GA-01) NUMBER 7
مالحظة
2.4.276 Division 5 METAL
2.4.277 Section 05520 Handrails and Railings
2.4.278 23 Supply and install Handrail , made from treated african teak (IROKO WOOD) w./ galvanized steel posts & galvanized steel wires ,supported on reinforced concrete wall by galvaniz
2.4.279 Note mortar
The bed
item ,
includes the following:
2.4.280 Note * 50mm round hardwood handrail, made from treated african teak
2.4.281 Note *(iroko
90mm wood),
x 90mmw./ galvanized
smooth finish & preservative
steel paint
post, w./ polyurethane paint ral. 7040, fixed to reinforced concrete wall by pre-welded galvanized steel plate
2.4.282 Note * galvanized steel rail bracket
2.4.283 Note * 3.2mm diameter galvanized steel wires w./ 316 grade
2.4.284 Note * pre-welded base plate fixation post to supplier's recommendations
2.4.285 Note * galvanized steel dowels
2.4.286 Note The item shall include but not limited to wooden work , galvanized steel work, fixation, anchoring, plates, paint, protection, accessories, flashing, fixation in site, finishing, all works
specifications, drawings, and any other materials or works required for the proper installation.
الرمز الوصف وحدة القياس الكمية
2.4.287 23.1 Handrail w./ overall height 1100mm (Type: HR-01), as shown on drawing METRE 68
مالحظة LA-JU-P03-DT-03
2.4.288 Division 10 SPECIALTIES
2.4.289 Section 10430 Signage
2.4.290 24 Supply secondary vehicular directional sign, type (DR-02) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels,
2.4.291 Note as shown
The on detail
item shall 3 ,F,G,H
include /LA-JU-P03-DT-04
the following:
2.4.292 Note * 25 mm thick GRC cladding with corrugated finish.
2.4.293 Note * 25 mm thick GRC cladding with smooth finish.
2.4.294 Note * Galvanized steel main support
2.4.295 Note * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
2.4.296 Note * Aluminum fret cut typeface and graphics in RAL. 6034
2.4.297 Note * Graphics as per drawing.
2.4.298 Note (Note: LED strip lighting is covered under Lighting Fixture BoQ )
2.4.299 Note The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
الرمز overheads and any other materials or accessories to meet specifications, drawings. وحدة القياس الكمية
الوصف
2.4.300 24.1 Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm NUMBER 5
مالحظة thickness, GRC cladding w./ RAL 5024 (DR-02)
2.4.301 Division 10 SPECIALTIES
2.4.302 Section 10430 Signage
2.4.303 25 Install secondary vehicular directional sign, type (DR-02), supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown
2.4.304 Note 3 ,F,G,H
The item /LA-JU-P03-DT-04
shall include the following:
2.4.305 Note The item shall include but not limited to the supply and installation of all accessories, fittings ,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
الرمز shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes,
القياس overheads and all accessories
وحدة for fixation all works required to meet specif
الكمية
الوصف
2.4.306 25.1 * Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm NUMBER 5
مالحظة thickness, GRC cladding w./ RAL 5024 (DR-02)
2.4.307 26 Supply and install Civil work for secondary vehicular directional sign, type (DR-02) as shown on detail 3 ,F,G,H /LA-JU-P03-DT-04
2.4.308 Note The item shall include the following:
2.4.309 Note * Plain concrete set on compacted subgrade.
2.4.310 Note * Reinforced concrete base .
2.4.311 Note * Waterproofing & protection work.
2.4.312 Note * 400 micron HDPE water proofing membrane
2.4.313 Note The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,waterpr
الرمز reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet
القياس وحدةspecifications, drawings, allالكمية
works required to meet specifications, drawin
الوصف
2.4.314 26.1 Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm NUMBER 5
مالحظة thickness, GRC cladding w./ RAL 5024 (DR-02)
2.4.315 27 Supply pedestrian directional sign, type (DR-03) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels, as shown on detail
2.4.316 Note 4, I,J,K
The item/LA-JU-P03-DT-04
shall include the following:
2.4.317 Note * 25 mm thick GRC cladding with corrugated finish.
2.4.318 Note * 25 mm thick GRC cladding with smooth finish.
2.4.319 Note * Galvanized steel main support
2.4.320 Note * 2 mm Aluminum box panels in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
2.4.321 Note * Aluminum fret cut typeface and graphics in RAL 6034
2.4.322 Note * Galvanized steel base plate & dowels
2.4.323 Note (Note: LED strip lighting is covered under Lighting Fixture BoQ )
2.4.324 Note The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
الرمز overheads and any other materials or accessories to meet specifications, drawings. وحدة القياس الكمية
الوصف
2.4.325 27.1 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness, NUMBER 9
مالحظة GRC cladding w./ RAL 5024 (DR-03)
2.4.326 Division 10 SPECIALTIES
2.4.327 Section 10430 Signage
2.4.328 28 Install pedestrian directional sign, type (DR-03) , supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown on detail
2.4.329 Note P03-DT-04
The item shall include the following:
2.4.330 Note The item shall include but not limited to the supply and installation of all accessories, fittings, mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
الرمز shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes,
القياس overheads and all accessories
وحدة for fixation, all works required to meet specif
الكمية
الوصف
2.4.331 28.1 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness, NUMBER 9
مالحظة GRC cladding w./ RAL 5024 (DR-03)
2.4.332 29 Supply and install Civil works for pedestrian directional sign, type (DR-03)
2.4.333 Note as shown
The on detail
item shall 4, I,J,K
include / LA-JU-P03-DT-04
the following:
2.4.334 Note * plain concrete, set on compacted subgrade.
2.4.335 Note * Reinforced concrete base .
2.4.336 Note *Waterproofing & protection work.
2.4.337 Note * 400 micron HDPE water proofing membrane
2.4.338 Note The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,waterp
الرمز reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet
القياس وحدةspecifications, drawings, allالكمية
works required to meet specifications, drawin
الوصف
2.4.339 29.1 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness, NUMBER 9
مالحظة GRC cladding w./ RAL 5024 (DR-03)
2.4.340 30 Supply Cluster identification sign, type (ID-03) with internal aluminum structure, 25 mm thick GRC cladding, aluminum composite panel, aluminum box letters, as shown on detail #
2.4.341 Note DT-04
The item shall include the following:
2.4.342 Note *25 mm thick GRC cladding with corrugated finish.
2.4.343 Note * Aluminum structure
2.4.344 Note * Aluminum composite panel in RAL 9001 with glossy metal finish
2.4.345 Note * Aluminum fret cut typeface in RAL 9001
2.4.346 Note * Aluminum box letters
2.4.347 Note (Note: LED strip lighting is covered under Lighting Fixture BoQ )
2.4.348 Note The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
الرمز overheads and any other materials or accessories to meet specifications, drawings. وحدة القياس الكمية
الوصف
2.4.349 30.1 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length, NUMBER 2
مالحظة GRC cladding w./ RAL 5024 (ID-03)
2.4.350 Division 10 SPECIALTIES
2.4.351 Section 10430 Signage
2.4.352 31 Install Cluster identification sign, type (ID-03) supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown on detail #1
2.4.353 Note DT-04
The item shall include the following:
2.4.354 Note The item shall include but not limited to the supply and installation of all accessories, fittings ,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
الرمز shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes,
القياس overheads and all accessories
وحدة for fixation all works required to meet specif
الكمية
الوصف
2.4.355 31.1 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length, NUMBER 2
مالحظة GRC cladding w./ RAL 5024 (ID-03)
2.4.356 32 Supply and install Civil work for Cluster identification sign, type (ID-03)
2.4.357 Note set on
The compacted
item subgrade,
shall include as shown on detail #1,B / LA-JU-P03-DT-04
the following:
2.4.358 Note * Plain concrete , set on compacted subgrade.
2.4.359 Note * Reinforced concrete base .
2.4.360 Note * Waterproofing & protection work.
2.4.361 Note * 400 micron HDPE water proofing membrane
2.4.362 Note The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,waterp
الرمز reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet
القياس وحدةspecifications, drawings, allالكمية
works required to meet specifications, drawin
الوصف
2.4.363 32.1 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length, NUMBER 2
مالحظة GRC cladding w./ RAL 5024 (ID-03)
2.4.364 33 Supply double sided facility identification sign, w./ rules and regulations type (ID-06) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels ,as shown on
2.4.365 Note /LA-JU-P03-DT-04
The item shall include the following:
2.4.366 Note *25 mm thick GRC cladding with corrugated finish.
2.4.367 Note *25 mm thick GRC cladding with smooth finish.
2.4.368 Note * Galvanized steel main support
2.4.369 Note * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
2.4.370 Note * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034, w./ etched and color filled typeface in RAL 6034
2.4.371 Note * Aluminum fret cut typeface and graphics in RAL 6034, side illuminated LED
2.4.372 Note (Note: LED strip lighting is covered under Lighting Fixture BoQ )
2.4.373 Note The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
الرمز overheads and any other materials or accessories to meet specifications, drawings. وحدة القياس الكمية
الوصف
2.4.374 33.1 * Double sided facility identification sign, w./ rules and regulations w./1750 mm NUMBER 6
مالحظة height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
2.4.375 Division 10 SPECIALTIES
2.4.376 Section 10430 Signage
2.4.377 34 Install double sided facility identification sign, w./ rules and regulations type (ID-06), as shown on detail 2 ,C,D,E /LA-JU-P03-DT-04
2.4.378 Note The item shall include the following:
2.4.379 Note The item shall include but not limited to the supply and installation of all accessories, fittings ,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
الرمز shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes,
القياس overheads and all accessories
وحدة for fixation all works required to meet specif
الكمية
الوصف
2.4.380 34.1 * Double sided facility identification sign, w./ rules and regulations w./1750 mm NUMBER 6
مالحظة height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
2.4.381 35 Supply and install Civil work for double sided facility identification sign, w./ rules and regulations type (ID-06) , shown on detail 2 ,C,D,E /LA-JU-P03-DT-04
2.4.382 Note The item shall include the following:
2.4.383 Note * Plain concrete , set on compacted subgrade.
2.4.384 Note * Reinforced concrete base.
2.4.385 Note * Waterproofing & protection work.
2.4.386 Note * 400 micron HDPE water proofing membrane
2.4.387 Note The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,water
الرمز reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet
القياس وحدةspecifications, drawings, allالكمية
works required to meet specifications, drawin
الوصف
2.4.388 35.1 * Double sided facility identification sign, w./ rules and regulations w./1750 mm NUMBER 6
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
اإلجمالي الفرعي للقسم
مالحظة
2.10.145 The item shall include but not limited to; compacted subgrade, formwork, reinforced concrete, plain concrete, plaster, paint, plaster stop, stone work, mosaic tiles, fastening in place
Note
steel work, stainless steel work, anchors, bolts, all accessories for fixation, all works required to meet specifications,
2.10.146 drawings and any other materials or works required for the proper installation, workmanship, shopdrawings, 4mm thick. torch applied, bituminous waterproofing membrane, cemen
Note
waterproofing,
2.10.147 400 micron HDPE waterproofing membrane, protection work to protect the waterproofing,granite works,special pieces shower sets, fixing, mortar, grouting, expansion joint, joint se
Note
backer rod, stainless steel dowels, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, and any other materials or works required
2.10.148 installation.
Supply and install maintenance gate Type (GA-01), w./ width 900mm, as shown on detail # 07/LA-JU-P03A-DT-04
16
2.10.149 The item shall include the following:
Note
2.10.150 * 50mm galvanized steel frame w./ polyurethane paint RAL. 7040
Note
fixed to galvanized steel post by galvanized steel hinges
2.10.151 * 3.2mm diameter galvanized steel wires, w./316 grade
Note
2.10.152 * heavy duty stainless steel slide bolt gate latch, w./ silver color
Note
2.10.153 * Galvanized steel hinges w./ polyurethane paint RAL. 7040
Note
2.10.154 Including but not limited to:
Note
2.10.155 SITE CONSTRUCTION
Note
2.10.156 Site Improvement
Note
2.10.157 The item shall include but not limited to all materials, workman-ship, shop-drawings, galvanized steel work, stainless steel work, paint, bolts, winder,labors, tools, equipment, profit,
Note
overheads, all accessories required for fixation, connection, plates, anchors, nuts, fixing, fastening to in place, all works required to meet specifications, drawings, and any other m
required for the proper installation.
الرمز الوصف وحدة القياس الكمية
2.10.158 Maintenance gate Type (GA-01)
16.1 NUMBER 2
مالحظة
2.10.159 Supply and install civil works for maintenance gate Type (GA-01),
17
w./ width 900mm, as shown on detail # 07/LA-JU-P03A-DT-04
2.10.160 Including but not limited to:
Note
2.10.161 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, material, waterproofing including protection work, labors, tool
Note
profit, taxes, overheads, all works required to meet specifications, drawings, and any other materials or works required for the proper installation.
الرمز الوصف وحدة القياس الكمية
2.10.162 Civil works for Maintenance gate Type (GA-01)
17.1 NUMBER 2
مالحظة
2.10.163 SPECIALTIES
Division 10
2.10.164 Signage
Section 10430
2.10.165 Supply secondary vehicular directional sign, type (DR-02) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels,
18
as shown on detail # 03/LA-JU-P03A-DT-03
2.10.166 The item shall include the following:
Note
2.10.167 * 25 mm thick GRC cladding with corrugated finish.
Note
2.10.168 * 25 mm thick GRC cladding with smooth finish.
Note
2.10.169 * Galvanized steel main support
Note
2.10.170 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
Note
2.10.171 * Aluminum fret cut typeface and graphics in RAL. 6034
Note
2.10.172 * Graphics as per drawing.
Note
2.10.173 (Note: LED strip lighting is covered under Lighting Fixture BoQ )
Note
2.10.174 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories, profit
Note
overheads and any other materials or accessories to meet specifications, drawings.
الرمز الوصف وحدة القياس الكمية
2.10.175 Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm
18.1 NUMBER 1
thickness, GRC cladding w./ RAL 5024 (DR-02)
مالحظة
2.10.176 SPECIALTIES
Division 10
2.10.177 Signage
Section 10430
2.10.178 Install secondary vehicular directional sign, type (DR-02), supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown o
19
JU-P03A-DT-03
2.10.179 The item shall include the following:
Note
2.10.180 The item shall include but not limited to the supply and installation of all accessories, fittings,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized stee
Note
cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation all works required to meet specifications, d
الرمز other materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.181 * Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm
19.1 NUMBER 1
thickness, GRC cladding w./ RAL 5024 (DR-02)
مالحظة
2.10.182 Supply and install Civil work for secondary vehicular directional sign, type (DR-02) as shown on detail # 03/LA-JU-P03A-DT-03
20
2.10.183 The item shall include the following:
Note
2.10.184 * Plain concrete set on compacted subgrade.
Note
2.10.185 * Reinforced concrete base .
Note
2.10.186 * Waterproofing & protection work.
Note
2.10.187 * 400 micron HDPE water proofing membrane
Note
2.10.188 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, waterproofing, protection works, HDPE, connection,waterproo
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, all works required to meet specifications, drawing
الرمز materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.189 Secondary vehicular directional sign w./1800 mm height, 400 mm width, 100 mm
20.1 NUMBER 1
thickness, GRC cladding w./ RAL 5024 (DR-02)
مالحظة
2.10.190 Supply pedestrian directional sign, type (DR-03) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels, as shown on detail
21
# 04/LA-JU-P03A-DT-03
2.10.191 The item shall include the following:
Note
2.10.192 * 25 mm thick GRC cladding with corrugated finish.
Note
2.10.193 * 25 mm thick GRC cladding with smooth finish.
Note
2.10.194 * Galvanized steel main support
Note
2.10.195 * 2 mm Aluminum box panels in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
Note
2.10.196 * Aluminum fret cut typeface and graphics in RAL 6034
Note
2.10.197 * Galvanized steel base plate & dowels
Note
2.10.198 (Note: LED strip lighting is covered under Lighting Fixture BoQ )
Note
2.10.199 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories, profit
Note
overheads and any other materials or accessories to meet specifications, drawings.
الرمز الوصف وحدة القياس الكمية
2.10.200 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness,
21.1 NUMBER 1
GRC cladding w./ RAL 5024 (DR-03)
مالحظة
2.10.201 SPECIALTIES
Division 10
2.10.202 Signage
Section 10430
2.10.203 Install pedestrian directional sign, type (DR-03), supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown on detail #
22
DT-03
2.10.204 The item shall include the following:
Note
2.10.205 The item shall include but not limited to the supply and installation of all accessories, fittings, mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized ste
Note
cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation, all works required to meet specifications,
الرمز any other materials or works required for the proper installation الوصف وحدة القياس الكمية
2.10.206 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness,
22.1 NUMBER 1
GRC cladding w./ RAL 5024 (DR-03)
مالحظة
2.10.207 Supply and install Civil works for pedestrian directional sign, type (DR-03)
23
as shown on detail # 04/LA-JU-P03A-DT-03
2.10.208 The item shall include the following:
Note
2.10.209 * plain concrete, set on compacted subgrade.
Note
2.10.210 * Reinforced concrete base .
Note
2.10.211 *Waterproofing & protection work.
Note
2.10.212 * 400 micron HDPE water proofing membrane
Note
2.10.213 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, waterproofing, protection works, HDPE, connection,waterproo
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, all works required to meet specifications, drawing
الرمز materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.214 Pedestrian directional sign w./2200 mm height, 400 mm width, 100 mm thickness,
23.1 NUMBER 1
GRC cladding w./ RAL 5024 (DR-03)
مالحظة
2.10.215 Supply Cluster identification sign, type (ID-03) with internal aluminum structure, 25 mm thick GRC cladding, aluminum composite panel, aluminum box letters, as shown on detail #
24
DT-03
2.10.216 The item shall include the following:
Note
2.10.217 *25 mm thick GRC cladding with corrugated finish.
Note
2.10.218 * Aluminum structure
Note
2.10.219 * Aluminum composite panel in RAL 9001 with glossy metal finish
Note
2.10.220 * Aluminum fret cut typeface in RAL 9001
Note
2.10.221 * Aluminum box letters
Note
2.10.222 (Note: LED strip lighting is covered under Lighting Fixture BoQ )
Note
2.10.223 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories, profit
Note
overheads and any other materials or accessories to meet specifications, drawings.
الرمز الوصف وحدة القياس الكمية
2.10.224 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length,
24.1 NUMBER 1
GRC cladding w./ RAL 5024 (ID-03)
مالحظة
2.10.225 SPECIALTIES
Division 10
2.10.226 Signage
Section 10430
2.10.227 Install Cluster identification sign, type (ID-03) supported on reinforced concrete base by galvanized steel base, dowels & self leveling epoxy mortar & grout, as shown on detail # 01
25
DT-03
2.10.228 The item shall include the following:
Note
2.10.229 The item shall include but not limited to the supply and installation of all accessories, fittings,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized stee
Note
cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation all works required to meet specifications, d
الرمز other materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.230 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length,
25.1 NUMBER 1
GRC cladding w./ RAL 5024 (ID-03)
مالحظة
2.10.231 Supply and install Civil work for Cluster identification sign, type (ID-03)
26
set on compacted subgrade, as shown on detail # 01/LA-JU-P03A-DT-03
2.10.232 The item shall include the following:
Note
2.10.233 * Plain concrete, set on compacted subgrade.
Note
2.10.234 * Reinforced concrete base .
Note
2.10.235 * Waterproofing & protection work.
Note
2.10.236 * 400 micron HDPE water proofing membrane
Note
2.10.237 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, waterproofing, protection works, HDPE, connection,waterproo
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, all works required to meet specifications, drawing
الرمز materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.238 * Pedestrian directional sign w./1360 mm height, 510mm width, 2484 mm length,
26.1 NUMBER 1
GRC cladding w./ RAL 5024 (ID-03)
مالحظة
2.10.239 Supply double sided facility identification sign, w./ rules and regulations type (ID-06) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels,as shown on
27
JU-P03A-DT-03
2.10.240 The item shall include the following:
Note
2.10.241 *25 mm thick GRC cladding with corrugated finish.
Note
2.10.242 *25 mm thick GRC cladding with smooth finish.
Note
2.10.243 * Galvanized steel main support
Note
2.10.244 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
Note
2.10.245 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034, w./ etched and color filled typeface in RAL 6034
Note
2.10.246 * Aluminum fret cut typeface and graphics in RAL 6034, side illuminated LED
Note
2.10.247 (Note: LED strip lighting is covered under Lighting Fixture BoQ )
Note
2.10.248 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories, profit
Note
overheads and any other materials or accessories to meet specifications, drawings.
الرمز الوصف وحدة القياس الكمية
2.10.249 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
27.1 NUMBER 2
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
مالحظة
2.10.250 SPECIALTIES
Division 10
2.10.251 Signage
Section 10430
2.10.252 Install double sided facility identification sign, w./ rules and regulations type (ID-06), as shown on detail # 02/LA-JU-P03A-DT-03
28
2.10.253 The item shall include the following:
Note
2.10.254 The item shall include but not limited to the supply and installation of all accessories, fittings,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized stee
Note
cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation all works required to meet specifications, d
الرمز other materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.255 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
28.1 NUMBER 2
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
مالحظة
2.10.256 Supply and install Civil work for double sided facility identification sign, w./ rules and regulations type (ID-06), shown on detail # 02/LA-JU-P03A-DT-03
29
2.10.257 The item shall include the following:
Note
2.10.258 * Plain concrete, set on compacted subgrade.
Note
2.10.259 * Reinforced concrete base.
Note
2.10.260 * Waterproofing & protection work.
Note
2.10.261 * 400 micron HDPE water proofing membrane
Note
2.10.262 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete, waterproofing, protection works, HDPE, connection,waterproo
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads, all works required to meet specifications, drawings, all works required to meet specifications, drawing
الرمز materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.10.263 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
29.1 NUMBER 2
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06)
اإلجمالي الفرعي للقسم
مالحظة
2.17.70 Note Note:
2.17.71 Note * LED
the strip
item lightingbut
including is not
not included
limited toand covered else
: compacted where under
subgrade, Lighting
formwork, Fixture BoQ
reinforced concrete, plain concrete, plaster, paint, plaster stop, fastening in place, galvanized steel work, an
2.17.72 Note accessories
3 for fixation,
layers cold-applied drainage 400
bituminous, gravel wrapped
micron HDPEby waterproofing
300 gm/m2 non-woven
membrane, geotextile filtration
Protection layer,
work to perforated
protect pipes (to beblock
the waterproofing, coordinated with thefor
work, opening infrastructure engineer),
recessed lighting 4 mm
fixtures, Th
mate
2.17.73 Division 2 proposed
SITE material, data sheet, labors, tools, equipment, workmanship, shop-drawings, profit, taxes, overheads and all works required to meet specs, drawings and any other mate
CONSTRUCTION
2.17.74 Section 02800 Site Improvement
2.17.75 31 Furnish and install outdoor BBQ station, type (BA-01) with clay tiles cladding, stainless steel accessories, granite counter top with light beige color, and an attached seat made fro
2.17.76 Note teak item
The (iroko wood),
shall all supported
include on reinforced concrete footing, R.C footing set on 400 micron HDPE, set on 100 mm thick. plain concrete, set on compacted subgrade, All as per d
the following:
2.17.77 Note * Masonary work related to the structure of the station
2.17.78 Note * Clay tiles cladding
2.17.79 Note * Stainless steel charcoal - ash pan
2.17.80 Note * Stainless steel grill grate
2.17.81 Note * Galvanized steel angles
2.17.82 Note * Granite capping , w./ rounded edge & flamed finish.
2.17.83 Note * Reinforced concrete base, set on plain concrete, set on compacted subgrade.
2.17.84 Note * Reinforced concrete wall.
2.17.85 Note * Waterproofing membrane & protection work.
2.17.86 Note * 400 micron HDPE waterproofing membrane
2.17.87 Note * Cantilever Timeber Bench Made from 4`X 4` treated African Teak T (IROKO WOOD), w./ smooth finish & preservative paint.
2.17.88 Note all wooden work made of newly imported wood with preservative paint, all timbers are pressure- treated in accordance with all applicable requirements and standards of the Ame
2.17.89 Note Preservers Association
The item shall all not
include but as shown
limited in
to drawing Timbers
all materials, and other
formwork, materials need
workman-ship, to have rounded
shop-drawings, or chamfered
reinforced edges.
concrete, All according
plain concrete, to workmanship
wooden work, stone essentials. all wooden
work, clay tiles, surfa
waterproof
2.17.90 Note works, weather
labors, resistant paints,
tools, equipment, electrostatic
profit, taxes, paint,and
overheads galvanized steel work,
all accessories stainless
for fixation, all steel
workswork, mechanical
required to meet fixations, anchors,
specifications, angles,allplates,
drawings, works chain, shackle,
required cleat,
to meet webbing, brack
specifications, draw
الرمز other materials or works required for the proper installation. وحدة القياس الكمية
الوصف
2.17.91 31.1 Outdoor BBQ station, type (BA-01) NUMBER 19
مالحظة
2.17.92 Division 2 SITE CONSTRUCTION
2.17.93 Section 02800 Site Improvement
2.17.94 32 Supply, Cast, and install outdoor Shower Unit (Type: SH-01),
2.17.95 Note w./ dimension
(The as per drawing
below quantities ,as shown
are for Nine (9) uniton
fordetail
shower10,11,H,I/ LA-JU-P05-DT-01
unit (Type: SH-01) and structure detail # 05/LA-JU-P05-ST-DT-02 (Gruhe)
2.17.96 Note The item shall include the following:
2.17.97 Note Structrure Work:
الرمز الوصف وحدة القياس الكمية
2.17.105 * Stainless steel gully outlet & fixture embedded into concrete baunch & to be
Note NUMBER 9
coordinated with infrastructure engineer.
2.17.106 * Outdoor shower AQUATICA GAMMA - 520 by AQUATICA freestanding outdoor
Note NUMBER 18
stainless steel shower RAL 316L
مالحظة
2.17.107 WALL FINISHES:
Note
مالحظة
2.17.129 HANDRAIL FINISHES:
Note
مالحظة
2.17.131 STAIRS FINISHES:
Note
مالحظة
2.17.145 CONCRETE
Division 3
2.17.146 Cast-In-Place Concrete
Section 03300
2.17.147 Supply and cast plain concrete with average compressive strength and type of cement, as per structure drawing.
35
2.17.148 The item shall include but not limited to all materials required, civil works, formwork, workmanship, joints, testing, curing, all works required to meet specifications, and any other ma
Note
required for the proper installation, coordination with all disceplines, shop-drawings, materials, testing of proposed materials, labors, tools, equipment, profit, taxes and overheads…
الرمز الوصف وحدة القياس الكمية
2.17.149 100 mm thick. plain concrete, set on compacted subgrade.
35.1 METRE SQUARE 1170
مالحظة
2.17.150 Supply and cast reinforced concrete slab on grade with average compressive strength and type of cement, as per drawing & specifications.
36
2.17.151 The item include but not limited to formwork, workmanship, expansion joints, preparation of subsurface, reinforcement, material, fair face concrete , waterproofing, protection work
Note
Backer rod, all works required to meet specifications, drawings, and any other materials or works required for the proper installation, coordination with all disceplines, shop-drawing
الرمز testing of proposed materials, labors, tools, equipment, profit, taxes and overheads……..etc
الوصف وحدة القياس الكمية
2.17.152 100 mm thick. Fair face reinforced concrete slab on grade w./ sand blasted finish &
36.1 METRE SQUARE 965
thickness of edges as per detail under terazzo Flooring.
مالحظة
2.17.153 METAL
Division 5
2.17.154 Handrails and Railings
Section 05520
2.17.155 Supply and install Handrail , made from treated african teak (IROKO WOOD) w./ galvanized steel posts & galvanized steel wires ,supported on reinforced concrete wall by galvaniz
37
mortar bed ,
2.17.156 The item includes the following:
Note
2.17.157 * 50mm round hardwood handrail, made from treated african teak
Note
(iroko wood), w./ smooth finish & preservative paint
2.17.158 * 90mm x 90mm galvanized steel post, w./ polyurethane paint ral. 7040, fixed to reinforced concrete wall by pre-welded galvanized steel plate
Note
2.17.159 METAL
Note
2.17.160 Handrails and Railings
Note
2.17.161 * galvanized steel rail bracket
Note
2.17.162 * 3.2mm diameter galvanized steel wires w./ 316 grade
Note
2.17.163 * pre-welded base plate fixation post to supplier's recommendations
Note
2.17.164 * galvanized steel dowels
Note
2.17.165 The item shall include but not limited to wooden work , galvanized steel work, fixation, anchoring, plates, paint, protection, accessories, flashing, fixation in site, finishing, all works
Note
specifications, drawings, and any other materials or works required for the proper installation.
الرمز الوصف وحدة القياس الكمية
2.17.166 Handrail w./ overall height 1000mm , as shown on drawing
37.1 METRE 210
C/LA-JU-P05-DT-03
مالحظة
2.17.167 Supply and install Handrail , made from treated african teak (IROKO WOOD) w./ galvanized steel posts & galvanized steel wires ,supported on reinforced concrete wall by galvaniz
38
mortar bed ,
2.17.168 The item includes the following:
Note
2.17.169 *50MM Round Hardwood Rail.
Note
2.17.170 *40MM X 80MM Galvanized steel rail praket.
Note
2.17.171 *Galvanized Steel Post.
Note
2.17.172 The item shall include but not limited to wooden work , galvanized steel work, fixation, anchoring, plates, paint, protection, accessories, flashing, fixation in site, finishing, all works
Note
specifications, drawings, and any other materials or works required for the proper installation.
الرمز الوصف وحدة القياس الكمية
2.17.173 Handrail w./ overall height 900mm for stairs , as shown on drawing
38.1 METRE 125
B/LA-JU-P05-DT-05
مالحظة
2.17.174 Division 6
Division 6
2.17.175 Exterior Architectural Wood Work
Section 06401
2.17.176 install 7" thick x 9" wide x 8.5' long first grade wooden railroad ties w./ preservative paint,
39
w./ resin bound permeable surfacing between slabs , w./100mm clearstone depth & 2-5mm aggregate size ,smooth finish & beige color ,fixed by deep galvanized steel anchors on
2.17.177 structure all as shown & detailed in drawing .
Note
including the following :
2.17.178 * 50mm Architectural
Exterior thick. Sand layer
Wood Work
Section 06401
2.17.179 All wooden surfaces free from blemishes or defects, all flooring wooden work made of treated Iroko wooden planks flooring with transparent matt quality sealant with light walnut c
Note
wooden work made of newly imported treated pitch-pine wood with preservative paint, all bolts shall be counter sunk and pluged with pitch-pine wooden plug, all timbers are pressu
2.17.180 accordance
including butwith
not all applicable
limited requirements
to coordination and standards
with other of the
disceplines, American
fixation, Wood - Preservers
leveling,aggregate, Association.
accessories, galvanized steel, sand , mortar,side cover, keels, shop drawing, samples,te
Note
materials, labors, tools, equipment, profit, taxes and overheads……..etc
2.17.181 (Note: Crushed stone is not included and measured else where under division 2)
Note
2.17.182 2" thick. treated iroko wood planks flooring .w/ transparent matt quality sealant w/ light walnut color
Note
مالحظة
2.17.189 FINISHES
Division 9
2.17.190 Rustic Terrazzo Flooring
Section 09961
2.17.191 Furnish and install @ 75 mm. thick. Bonded cementitious Rustic
41
2.17.192 Terrazzo flooring, with texured finish & greige background
Note
2.17.193 with cream, beige, brown and black aggregate 3:6mm. max.
Note
2.17.194 all as per NTMA : (National Terrazzo and Mosaic Association, Inc).
Note
2.17.195 including the following:
Note
2.17.196 * 1/2" textured surface Terrazzo topping
Note
2.17.197 FINISHES
Division 9
2.17.198 Rustic Terrazzo Flooring
Section 09961
2.17.199 * 2.49/2" underbeded:sand, cement-low slump- set on
Note
2.17.200 * Bonding material, set on Reinforced slab on grade w./fair face finish
Note
2.17.201 all as per the following specification :
Note
2.17.202 * Product Data: Terrazzo Contractor shall submit Product Data for each type of product required for installation including Strip materials, Sealer & Cement,
Note
2.17.203 *Shop Drawings: Terrazzo Contractor shall prepare and submit Shop Drawings that include plans, elevations, sections, component details, and attachments to other work. Include
Note
installation requirements. Show layout of the following: Divider strips, Expansion-joint strips, Accessory strips, Abrasive strips, Stair treads, risers, and landings-if any), Terrazzo pa
2.17.204 *Samples for Initial Selection: Terrazzo Contractor shall submit
Note
2.17.205 NTMA “Color Palette Brochure” showing full range of colors
Note
2.17.206 and patterns available for each terrazzo type.
Note
2.17.207 *Samples for Verification: Terrazzo Contractor shall prepare and submit samples for each type, material, color, and pattern of terrazzo and accessory required showing the full rang
Note
texture, and pattern variations expected. Each terrazzo sample shall be labeled to identify manufacturer's matrix color and aggregate types, sizes, and proportions. Each Sample s
2.17.208 thickness
1. and
Terrazzo: 12prepared from
by 12 inch same material
Samples to bestrips
with divider used4for the Work,
inches in size
from each indicated below:
edge.
Note
2.17.209 2. Accessories: 6 inch long Samples of each type and kind of exposed strip item required.
Note
2.17.210 Terrazzo Contractor shall obtain each color, grade, type, and variety of granular materials from single source with resources to provide materials of consistent quality in appearanc
Note
properties.
2.17.211 *Mockups: Terrazzo Contractor shall construct mockup if required in bid or scope of work documents to verify selections made under Sample submittals and to demonstrate aesthe
Note
set quality standards for materials and execution.
2.17.212 *Materials:
Note
2.17.213 A. Portland cement: ASTM C 150, Type I, with white color
Note
2.17.214 B. Sand: Coarse, clean, washed, locally available sand.
Note
2.17.215 C. Marble, Quartz, Granite or Gravel:
Note
2.17.216 1. Size: Conform to NTMA standards.
Note
2.17.217 2. Abrasion and Impact Resistance: Not more than 40 percent loss when tested in accordance with ASTM C 131
Note
2.17.218 3. Chips shall contain no deleterious or foreign matter.
Note
2.17.219 D. Colorant: Alkali-resistant color stable pigments
Note
2.17.220 E. Strips:
Note
2.17.221 1. Expansion joints: Zinc with a cap strip top with full depth of underbed and Terrazzo topping
Note
2.17.222 2. Divider Strips: stainless steel with bronz color.
Note
2.17.223 F. Curing Materials: Water or polyethylene sheeting.
Note
2.17.224 FINISHES
Division 9
2.17.225 Rustic Terrazzo Flooring
Section 09961
2.17.226 *Miscellaneous accessories
Note
2.17.227 A. Sealant: Polyurethane with appropriate backer rod.
Note
2.17.228 B. Sealer: Terrazzo Contractor shall provide a penetrating, non-ambering, clear sealer that is chemically neutral; does not impair terrazzo aesthetics or physical properties; is spec
Note
recommended for rustic terrazzo. Sealers shall comply with the following:
2.17.229 1. Solvent-Based Sealer Properties: Flashpoint at 95 deg. F according to ASTM D 56.
Note
2.17.230 *Mixes:
Note
2.17.231 A. Terrazzo Selection: Terrazzo Contractor shall provide terrazzo mix(es) according to the following:
Note
2.17.232 1. NTMA Plate: to be chosen based on the submitted samples by
Note
2.17.233 the Architect/Engineer and SODIC representative
Note
2.17.234 2. Mix Color: as selected by the Architect/Engineer and SODIC
Note
2.17.235 representative from NTMA rustic-terrazzo plates.
Note
2.17.236 *Custom Mix Color and Pattern: to be approved by the
Note
2.17.237 Architect/engineer & SODIC representative.
Note
2.17.238 including but not limited to all materials, testing of proposed material,
Note
2.17.239 shopdrawings, samples, expaision joints, joint sealant, backer rod,
Note
2.17.240 filler, stainless steel strip dividers with bronze color, product data,
Note
2.17.241 labors, tools, equipments, profit, taxes and overheads.
Note
2.17.242 (Note: Slab on grade, 400 micron HPDE layer & plain concrete are not included and measured else where under division 3,7)
Note
2.17.243 Note: fair face slab on grade to be sandblasted finish under Terrazo in-situe)
Note
مالحظة
2.17.314 Install double sided facility identification sign, w./ rules and regulations type (ID-06), as shown on detail 6,O,P, Q/LA-JU-P05-DT-07
49
2.17.315 The item shall include the following:
Note
2.17.316 The item shall include but not limited to the supply and installation of all accessories, fittings ,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
Note
shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation all works required to meet specif
الرمز drawings, and any other materials or works required for the proper installation.الوصف وحدة القياس الكمية
2.17.317 * Villa identification sign, type (ID-04) For Sands Zone.
49.1 NUMBER 56
2.17.318 * Villa identification sign, type (ID-04) For Quarts Water Houses Zone.
49.2 NUMBER 135
مالحظة
2.17.319 SPECIALTIES
Note
2.17.320 Signage
Note
2.17.321 Supply and install Civil work for double sided facility identification sign, w./ rules and regulations type (ID-04) , shown on detail 6,O,P, Q/LA-JU-P05-DT-07
50
2.17.322 The item shall include the following:
Note
2.17.323 * Plain concrete , set on compacted subgrade.
Note
2.17.324 * Reinforced concrete base.
Note
2.17.325 * Waterproofing & protection work.
Note
2.17.326 * 400 micron HDPE water proofing membrane
Note
2.17.327 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,water
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet specifications, drawings, all works required to meet specifications, drawin
2.17.328 materials
(Note: orIdentification
Villa works required forforthe
sign proper
Zone frominstallation.
Plot 1 : 25 are covered at Fences and Gates Package)
Note
مالحظة
2.17.331 Supply double sided facility identification sign, w./ rules and regulations type (ID-06) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels ,as shown on
51
/LA-JU-P05-DT-07
2.17.332 The item shall include the following:
Note
2.17.333 *25 mm thick GRC cladding with corrugated finish.
Note
2.17.334 *25 mm thick GRC cladding with smooth finish.
Note
2.17.335 * Galvanized steel main support
Note
2.17.336 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
Note
2.17.337 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034, w./ etched and color filled typeface in RAL 6034
Note
2.17.338 * Aluminum fret cut typeface and graphics in RAL 6034, side illuminated LED
Note
2.17.339 (Note: LED strip lighting is covered under Lighting Fixture BoQ )
Note
2.17.340 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
Note
overheads and any other materials or accessories to meet specifications, drawings.
الرمز الوصف وحدة القياس الكمية
2.17.341 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
51.1 NUMBER 4
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06) For
مالحظة Sands Zone
2.17.342 SPECIALTIES
Division 10
2.17.343 Signage
Section 10430
2.17.344 Install double sided facility identification sign, w./ rules and regulations type (ID-06), as shown on detail 2,C,D,E /LA-JU-P05-DT-07
52
2.17.345 The item shall include the following:
Note
2.17.346 The item shall include but not limited to the supply and installation of all accessories, fittings ,mechanical fixations, anchor, dowels, plates, flange plate, accessories, galvanized st
Note
shackle, cleat, webbing, bracket, dowels, sealant, fixing in place, labors, tools, equipment, profit, taxes, overheads and all accessories for fixation all works required to meet specif
الرمز drawings, and any other materials or works required for the proper installation.الوصف وحدة القياس الكمية
2.17.347 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
52.1 NUMBER 4
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06) For
مالحظة Sands Zone.
2.17.348 Supply and install Civil work for double sided facility identification sign, w./ rules and regulations type (ID-06) , shown on detail 2,C,D,E /LA-JU-P05-DT-07
53
2.17.349 The item shall include the following:
Note
2.17.350 * Plain concrete , set on compacted subgrade.
Note
2.17.351 * Reinforced concrete base.
Note
2.17.352 * Waterproofing & protection work.
Note
2.17.353 * 400 micron HDPE water proofing membrane
Note
2.17.354 The item shall include but not limited to formwork, workman-ship, shop-drawings, reinforced concrete, plain concrete , waterproofing, protection works, HDPE, connection ,water
Note
reinforced concrete footing, labors, tools, equipment, profit, taxes, overheads , all works required to meet specifications, drawings, all works required to meet specifications, drawin
الرمز materials or works required for the proper installation. الوصف وحدة القياس الكمية
2.17.355 * Double sided facility identification sign, w./ rules and regulations w./1750 mm
53.1 NUMBER 4
height, 460 mm width, 160 mm thickness, GRC cladding w./ RAL5024 (ID-06) For
مالحظة Sands Zone.
2.17.356 Supply double sided pool identification sign, w./ rules and regulations type (ID-07) with galvanized steel columns, 25 mm thick GRC cladding, aluminum box panels, as shown on d
54
2.17.357 The item shall include the following:
Note
2.17.358 *25 mm thick GRC cladding with corrugated finish.
Note
2.17.359 *25 mm thick GRC cladding with smooth finish.
Note
2.17.360 * Galvanized steel main support
Note
2.17.361 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034
Note
2.17.362 * Aluminum box panel in RAL 9001 with glossy metal finish and decorative lines in RAL. 6034, w./ etched and color filled typeface in RAL 6034
Note
2.17.363 * Aluminum fret cut typeface and graphics in RAL 6034, side illuminated LED
Note
2.17.364 (Note: LED strip lighting is covered under Lighting Fixture Boq )
Note
2.17.365 The item shall include but not limited to all materials, GRC, Aluminum, weather resistant paints, electrostatic paint, connection system, galvanized steel work, all accessories , profi
Note
overheads and any other materials or accessories to meet specifications, drawings.
2.17.366 SPECIALTIES
Division 10
2.17.367 Signage
Section 10430
plate
els,
6034
تفاصيل الملحوظة
stone work, mosaic tiles, fastening in place, galvanized
تفاصيل الملحوظة
تفاصيل الملحوظة
els,
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
own on detail
alvanized steel work, all accessories, profit, taxes,
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
aluminum box letters, as shown on detail # 01/LA-JU-P03A-
تفاصيل الملحوظة
تفاصيل الملحوظة
ection works, HDPE, connection,waterproofing for
ks required to meet specifications, drawings, and any other
سعر الوحدة السعر
0
تفاصيل الملحوظة
dding, aluminum box panels,as shown on detail # 02/LA-
6034
تفاصيل الملحوظة
تفاصيل الملحوظة
-P03A-DT-03
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
ns.
تفاصيل الملحوظة
ted on reinforced concrete wall by galvanized steel dowels &
plate
تفاصيل الملحوظة
ted on reinforced concrete wall by galvanized steel dowels &
تفاصيل الملحوظة
rent matt quality sealant with light walnut color, all structure
h-pine wooden plug, all timbers are pressure - treated, in
ide cover, keels, shop drawing, samples,testing of proposed
تفاصيل الملحوظة
تفاصيل الملحوظة
Sealer & Cement,
تفاصيل الملحوظة
els,
تفاصيل الملحوظة
تفاصيل الملحوظة
تفاصيل الملحوظة
own on detail
alvanized steel work, all accessories , profit, taxes,
تفاصيل الملحوظة
epoxy mortar & grout, as shown on detail 4, I,J,K /LA-JU-
تفاصيل الملحوظة
تفاصيل الملحوظة
on detail 6,O,P, Q/LA-JU-P05-DT-07
6034
تفاصيل الملحوظة
0
تفاصيل الملحوظة
A-JU-P05-DT-07
تفاصيل الملحوظة
dding, aluminum box panels ,as shown on detail 2,C,D,E
6034
تفاصيل الملحوظة
تفاصيل الملحوظة
A-JU-P05-DT-07
تفاصيل الملحوظة
ding, aluminum box panels, as shown on drawing.
6034
تفاصيل الملحوظة
steel base, dowels & self leveling epoxy mortar & grout ,as
تفاصيل الملحوظة
76050