Scribd
Upload
26 views1 page

L42009E2

Formolene® L42009B is a general-purpose linear low-density polyethylene butene copolymer designed for film extrusion, known for its toughness and strength in thin gauges. It complies with FDA regulations for food contact applications and is suitable for various uses including industrial packaging and garment bags. The document provides detailed physical properties and available additive packages for the resin.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views1 page

L42009E2

Formolene® L42009B is a general-purpose linear low-density polyethylene butene copolymer designed for film extrusion, known for its toughness and strength in thin gauges. It complies with FDA regulations for food contact applications and is suitable for various uses including industrial packaging and garment bags. The document provides detailed physical properties and available additive packages for the resin.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Formolene® L42009B

Linear Low Density Polyethylene


Butene Copolymer for Film Extrusion
Formolene® L42009B is a general-purpose film grade linear low density made using gas-phase technology.
The resin exhibits excellent toughness and strength when drawn down to thin gauges.
Formolene® L42009B meets all requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
Suggested Applications:
Blending Resin Industrial Liners
Industrial Packaging Garment Bags
Co-Extrusion
Nominal Physical Properties:
ASTM
TEST
PROPERTY METHOD UNIT VALUE
Density D1505 g/cc 0.919
Melt Index, Condition E, 190°C/2.16 kg D1238 g/10 min. 0.95
Dart Impact D1709 g/mil. 135
Tear Strength D1922 g/mil. 150/385*
Tensile Strength at Break D882 psi. 5,100/4,130*
Elongation D882 % 690/920*
Gloss, 45° D523 42
Haze D1003 % 18
* MD / TD
Available in the following additive packages:
Additive L42009A L42009B L42009E2 L42009F L42009H L42009M L42009PE**
Antiblock (ppm) 7500 None 1700 7000 None 8000 1700
Slip (ppm) None None 1350 1350 None 1500 1350
Special Additives - Additives Additives High Additives Additives
talc based synthetic talc based Antioxidant talc based synthetic
based based
** Contains processing aid

Note: Film Properties based on 25 Micron blown film produced with a 2.5:1Blow Up Ratio. Actual film properties may vary depending on operating conditions and
additive packages. Film properties are not intended to be used as specifications.

Published 8/04, Revised 05/12

4/10

You might also like