TABLE OF CONTENTS

7.0 Pump Motors

7.1 Value Line™ Vertical

Hollow Shaft - Ball Style NRR
7.1 Standard Features
7.2 Pricing
7.4 Dimensions
7.5 Kits and Accessories

7.8 Vertical Solid Shaft Inline Pump

7.8 Standard Features
7.9 Pricing
7.10 Dimensions

7.11 Fire Pump - Open Dripproof

7.11 Standard Features
7.12 Pricing
7.13 Dimensions
GE Energy
GE Energy Section 7 – Pump Motors

ValueLine ™

Vertical Hollow Shaft WPI

NEW! Standard Efficient Motors
Available to order now!
Stock available May 2012!

Rugged and reliable, the

ValueLine VHS WPI is the
best choice for your critical
pumping applications.
• 40-100 HP, 1800RPM, 230/460V
• Two Year Warranty
• Higher efficiency than most
competitive standard efficient
motors.
• Rugged Construction
o High Thrust
o Space Heater
o Inverter Duty Insulation
o Non-Reverse Ball Ratchet

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

GE Energy Section 7 – Pump Motors

Vertical
Value Line™ Vertical Hollow Shaft
Weather Protection I
Ball Style Non-Reverse Ratchet
Standard Features

Type Standard Efficiency High Efficiency

HP Range 40-100 5-500
Poles 4 2, 4, 6
Voltage 230/460 230/460, 460 7.1

Agency Approvals UL - Component and Insulation System Recognition, CSA - Motors UL - Component and Insulation System Recognition, CSA - Motors

Value Line™ Pump Motor

Altitude 3300 ft 3300 ft
Ambient 40ºC 40ºC
Balance/Vibration 0.15 in/sec max 0.15 in/sec max
Bearing Caps Yes Yes
Bearing Protection Shaft Slinger Shaft Slinger
Bearing Type High Thrust High Thrust
Conduit Box Cast Iron Cast Iron
Coupling Non-Reverse or Bolted Non-Reverse or Bolted
Efficiency Standard Efficiency High Efficiency
End Shield Cast Iron Cast Iron
Fasteners SAE SAE
Finishing Varnish Applied to stator windings for additional moisture protection. Applied to stator windings for additional moisture protection.
Frame Material Cast Iron Cast Iron
Frame Size 324-404 213-449
Frequency 60 Hz (De-rated at 50 Hz and noted on the nameplate.) 60 Hz (De-rated at 50 Hz and noted on the nameplate.)
All Guide and 213-286 Thrust Bearings: Shell Alvania R3, 324-449;
Grease/Oil All Guide Bearings: Shell Alvania R3, 324-449; ISO 32, 150 SUS
Polyrex EM, 350-500HP Thrust Bearings: ISO 32, 150 SUS
Ground Brass Bolt in Conduit Box Brass Bolt in Conduit Box
Insulation Class F F
Insulation Non-Hygroscopic, Anti-Fungus, Meets NEMA MG1-31 for variable Non-Hygroscopic, Anti-Fungus, Meets NEMA MG1-31 for variable
System frequency drives. frequency drives.
Inverter Variable Torque *20-60 Hz (see Inverter Duty Capabilities Variable Torque 0-60 Hz without non-reverse ratchet and
Capabilities on page iv) *20-60 Hz with NRR (see Inverter Duty Capabilities on page iv)
Lifting Means Yes Yes
Mounting Vertical P-Base Vertical P-Base
Nameplate Stainless Steel Stainless Steel
NEMA Design A or B A or B
Non-Reverse
Ball Style Ball Style
Ratchet Type
Paint Gray, Polyurethane Gray, Polyurethane; Buff Epoxy ester for 350-500HP
Relubrication Yes Yes
Rotor Cast Aluminum Cast Aluminum
Service Factor 1.15 1.15
Space Heater Standard on all 4 Pole ratings, 115 Volt, 60 Hz Standard on all 4 Pole ratings, 115 Volt, 60 Hz
Temperature Rise 80ºC @ 1.0 SF 80ºC @ 1.0 SF
Tests NEMA Routine, IEEE 112 Method B NEMA Routine, IEEE 112 Method B
Time Rating Continuous Continuous
Top Hat Steel Steel
24 months from date of purchase or 30 months from date of 36 months from date of purchase or 42 months from date of
Warranty
shipment, whichever occurs first shipment, whichever occurs first

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GE Energy Section 7 – Pump Motors

Vertical
Value Line™ Vertical Hollow Shaft
Standard Efficiency
Weather Protection I
Ball Style Non-Reverse Ratchet
Pricing

Volts: 230/460
HP: 40-100
7.2 *Motor coupling is required and priced separately on page 7.5.

Motor Coupling CD AG
Value Line™ Pump Motor

NEMA Thrust List List Price Norm. Wt. Dim. Dim.

HP RPM Volts Frame FLA Code Down LRA Nom. Eff. Cat. No. Price Price* Symbol Stk. (lbs) (in) (in) Notes
40 1800 230/460 L324TP16 104.6/52.3 G 5700 286.9 90.2 V3909 $3,114 $732 G5-7VHSB Y 760 28.22 32.72 51, 111

50 1800 230/460 L326TP16 127.4/63.7 G 5650 359.1 91.7 V3920 $3,827 $732 G5-7VHSB Y 760 28.22 32.72 51, 111

60 1800 230/460 L364TP16 167.2/83.6 G 8200 442.9 91.7 V3929 $4,604 $732 G5-7VHSB Y 1102 31.16 35.95 51, 111

75 1800 230/460 L365TP16 195.0/97.5 G 8100 574.6 92.4 V3940 $5,705 $732 G5-7VHSB Y 1102 31.16 35.95 51, 111

100 1800 230/460 L404TP16 228.0/114.0 G 11900 558.0 93.0 V3951 $7,229 $845 G5-7VHSB Y 1590 36.94 42.05 51, 111

Notes:
PWS following the voltage denotes motor is Part Winding Start
51 Space Heater, 115V/60 Hz
111 Usable on 190/380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

GE Energy Section 7 – Pump Motors

Vertical
Value Line™ Vertical Hollow Shaft
High Efficiency
Weather Protection I
Ball Style Non-Reverse Ratchet
Pricing
Volts: 230/460, 460
HP: 5-500

*Motor coupling is required and priced separately on page 7.5. V850, V851 and V852 motor coupling on page 7.6.
Motor Coupling 7.3
FLA @ NEMA Thrust Nom. List List Price Norm. Wt. CD Dim. AG Dim.
HP RPM Volts Frame 460 Code Down LRA Eff. Cat. No. Price Price* Symbol Stk (lbs) (in) (in) Notes
5 3600 230/460 L213TP10 6.2 J 1900 39 85.5 V3109 $1,512 $168 G5-7VHSB Y 220 20.25 24.62 111

Value Line™ Pump Motor

5 1800 230/460 L213TP10 6.4 J 2400 41 87.5 V3616 $1,497 $168 G5-7VHSB Y 220 20.25 24.62 51, 111
7.5 3600 230/460 L213TP10 9.2 J 1900 70 87.5 V3108 $1,629 $168 G5-7VHSB Y 220 20.25 24.62 6, 111
7.5 1800 230/460 L213TP10 9.5 H 2400 61 88.5 V3615 $1,545 $168 G5-7VHSB Y 220 20.25 24.62 51, 111
10 3600 230/460 L213TP10 12.5 J 1900 92 88.5 V3107 $1,761 $168 G5-7VHSB Y 220 20.25 24.62 6, 111
10 1800 230/460 L215TP10 12.3 H 2350 76 89.5 V3643 $1,761 $168 G5-7VHSB Y 220 20.25 24.62 51, 111
10 1200 230/460 L256TP12 13.1 H 3750 83 90.2 V3178 $2,655 $180 G5-7VHSB Y 370 23.38 27.85 6, 111
15 3600 230/460 L215TP10 18.3 H 1850 127 89.5 V3139 $2,070 $168 G5-7VHSB Y 220 20.25 24.62 6, 111
15 1800 230/460 L254TP10 18.6 G 3250 111 91.0 V3658 $2,129 $176 G5-7VHSB Y 340 23.38 27.85 51, 111
15 1800 230/460 L254TP16 18.6 G 3250 111 91.0 V3660 $2,129 $176 G5-7VHSB Y 340 23.38 27.85 51,111
15 1200 230/460 L284TP12 18.8 H 3700 124 90.2 V3191 $2,901 $180 G5-7VHSB Y 507 24.75 29.25 6, 111
20 3600 230/460 L254TP10 22.7 G 2600 131 90.2 V3157 $2,273 $176 G5-7VHSB Y 340 23.38 27.85 111
20 1800 230/460 L256TP12 24.6 G 3250 136 91.0 V3674 $2,513 $176 G5-7VHSB Y 370 23.38 27.85 51, 111
20 1800 230/460 L256TP16 24.6 G 3250 136 91.0 V3676 $2,513 $176 G5-7VHSB Y 370 23.68 27.85 51.111
25 3600 230/460 L256TP12 27.8 G 2600 179 91.0 V3171 $2,601 $176 G5-7VHSB Y 370 23.38 27.85 111
25 1800 230/460 L284TP12 30.6 G 3200 148 91.7 V3689 $2,793 $180 G5-7VHSB Y 507 24.75 29.25 51, 111
25 1800 230/460 L284TP16 30.6 G 3200 148 91.7 V3690 $2,793 $180 G5-7VHSB Y 507 24.75 29.25 51, 111
30 3600 230/460 L284TP12 34.5 G 2600 187 91.0 V3188 $2,655 $180 G5-7VHSB Y 507 24.75 29.25 111
30 1800 230/460 L286TP12 36.2 G 3150 179 92.4 V3698 $3,149 $180 G5-7VHSB Y 507 24.75 29.25 51, 111
30 1800 230/460 L286TP16 36.2 G 3150 179 92.4 V3699 $3,149 $180 G5-7VHSB Y 507 24.75 29.25 51, 111
30 1200 230/460 L326TP16 37.3 G 6550 218 92.4 V3423 $4,178 $732 G5-7VHSB Y 855 28.22 32.72 111
40 3600 230/460 L286TP12 45.9 G 2500 238 91.7 V3197 $3,525 $180 G5-7VHSB Y 507 24.75 29.25 111
40 1800 230/460 L324TP12 47.4 G 5700 297 93.0 V3611 $3,348 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 111
40 1800 230/460 L324TP16 47.4 G 5700 297 93.0 V3609 $3,348 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 111
40 1800 460 PWS L324TP16 47.4 G 5700 297 93.0 V3610 $3,348 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 110
40 1200 230/460 L364TP16 42.1 G 9450 304 93.0 V3435 $5,232 $732 G5-7VHSB Y 1102 31.16 35.95 6, 111
50 3600 230/460 L324TP12 56.9 H 4550 414 92.4 V3407 $4,088 $732 G5-7VHSB Y 790 28.22 32.72 6, 111
50 3600 230/460 L324TP16 56.9 H 4550 414 92.4 V3450 $4,088 $732 G5-7VHSB N 760 28.22 32.72 6, 111
50 1800 230/460 L326TP12 59.6 G 5650 376 93.0 V3622 $4,115 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 111
50 1800 230/460 L326TP16 59.6 G 5650 376 93.0 V3620 $4,115 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 111
50 1800 460 PWS L326TP16 59.6 G 5650 376 93.0 V3621 $4,115 $732 G5-7VHSB Y 760 28.22 32.72 6, 51, 111
60 3600 460 PWS L326TP16 75.0 H 4500 520 92.4 V3551 $4,769 $732 G5-7VHSB Y 760 28.22 32.72 6, 110
60 1800 230/460 L364TP16 72.7 G 8200 459 93.6 V3629 $4,950 $732 G5-7VHSB Y 1102 31.16 35.95 51,110
60 1800 460 PWS L364TP16 72.7 G 8200 459 93.6 V3630 $4,950 $732 G5-7VHSB Y 1102 31.16 35.95 51,110
60 1200 460 PWS L404TP16 70.8 G 13850 454 93.6 V3553 $7,187 $845 G5-7VHSB Y 1590 36.94 42.05 6, 110
75 3600 460 PWS L364TP16 83.4 G 6500 540 93.0 V3428 $5,993 $732 G5-7VHSB Y 1102 31.16 35.95 110
75 1800 230/460 L365TP16 89.3 G 8100 561 94.1 V3640 $6,135 $732 G5-7VHSB Y 1102 31.16 35.95 6, 51, 111
75 1800 460 PWS L365TP16 89.3 G 8100 561 94.1 V3641 $6,135 $732 G5-7VHSB Y 1102 31.16 35.95 6, 51, 110
75 1200 460 PWS L405TP16 88.3 G 13750 572 93.6 V3555 $8,600 $845 G5-7VHSB Y 1590 36.94 42.05 6, 110
100 1800 230/460 L404TP16 128.0 G 11900 583 94.1 V3651 $7,773 $845 G5-7VHSB Y 1590 36.94 42.05 51, 111
100 1800 460 PWS L404TP16 128.0 G 11900 583 94.1 V3653 $7,773 $845 G5-7VHSB Y 1590 36.94 42.05 51, 110
100 1200 460 PWS L444TP16 123.0 G 13600 743 94.1 V3468 $11,709 $900 G5-7VHSB N 2075 44.80 50.11 6, 110
125 1800 460 PWS L405TP16 162.0 G 11700 878 94.5 V3656 $9,600 $845 G5-7VHSB Y 1590 36.94 42.05 51, 110
150 1800 460 PWS L444TP16 167.0 G 11700 1035 95.0 V3664 $11,100 $900 G5-7VHSB Y 2075 44.80 50.11 51, 110
150 1800 460 PWS L444TP20 167.0 G 11700 1035 95.0 V3666 $11,100 $900 G5-7VHSB Y 2075 44.80 50.11 51, 110
200 1800 460 PWS L445TP16 232.0 G 11500 1576 95.0 V3670 $15,003 $900 G5-7VHSB Y 2260 44.80 50.11 6, 51, 110
200 1800 460 PWS L445TP20 232.0 G 11500 1576 95.0 V3683 $15,003 $900 G5-7VHSB Y 2260 44.80 50.11 6, 51, 110
250 1800 460 PWS L447TP20 298.0 J 14100 2266 95.4 V3678 $18,069 $1,125 G5-7VHSB Y 3000 44.80 50.00 6, 51, 110
300 1800 460 PWS L449TP20 362.0 J 13800 2695 95.4 V3679 $21,509 $1,125 G5-7VHSB Y 3500 49.78 55.02 6, 51, 110
350 1800 460 PWS L449TP20 386.0 G 13345 2386 95.4 V850 $27,759 $1,125 G6-7VHS Y 2170 55.80 61.94 51, 110, 112
400 1800 460 PWS L449TP20 441.0 G 13345 2758 95.4 V851 $31,533 $1,125 G6-7VHS Y 2200 55.80 61.94 51, 110, 112
500 1800 460 PWS L509TP24 553.0 G 14800 3285 95.0 V852 $41,106 $1,650 G6-7VHS Y 3570 59.90 66.32 51, 110, 112

Notes:
PWS following the voltage denotes motor is Part Winding Start
6 NEMA Design A
51 Space Heater, 115V/60 Hz
110 Usable on 380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP
111 Usable on 190/380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP
112 350HP-500 HP ratings are Premium Efficient, Type KS motors with Buff color Epoxy ester paint and include winding thermostats.

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GEEnergy
GE Energy Section88––Pump
Section PumpMotors
Motors
GE Energy Section 7 – Pump Motors
GE Energy Section 8 – Pump Motors
Vertical
Vertical
Vertical
Value Line™ Vertical
Vertical Hollow
Hollow Shaft
Shaft
Value Line™
Vertical
Value
Weather Line™ Vertical
Protection Hollow Shaft
Weather
Value Protection
Line™ II Hollow Shaft
Vertical
Weather
Ball Protection I Ratchet
StyleNon-Reverse
Non-Reverse
Ball Style
Weather Protection I Ratchet
Ball Style Non-Reverse Ratchet
Ball Style Non-Reverse Ratchet
Dimensions
Dimensions
Dimensions
Dimensions

7.4 MotorDimensions
Motor Dimensions (dimensions
(dimensionsinininches)
inches)
Motor Dimensions (dimensions in inches)
FrameSize
Frame Size AG
AG AJ
AJ AK
AK BB
BB BC
BC BD
BD BE
BE BF
BF BV
BV CD
CD ED
ED QA
QA QC
QC QN
QN Notes
Notes
Frame Size
L213TP10/L215TP10 AG 9.13
24.62 AJ 8.25 AK BB
0.22 BC
0.25 BD
10.0 BE0.75 BF 0.44 BV 8.14 CD 20.25 ED QA
4.35 QC
14.17 QN
1.125 Notes
1.000
Value Line™ Pump Motor

L213TP10/L215TP10 24.62 9.13 8.25 0.22 0.25 10.0 0.75 0.44 8.14 20.25 4.35 14.17 1.125 1.000
L213TP10/L215TP10 24.62 9.13 8.25 0.22 0.25 10.0 0.75 0.44 8.14 20.25 4.35 14.17 1.125 1.000
L213TP12/L215TP12 24.62
L213TP12/L215TP12 24.62 9.139.13 8.258.25 0.22
0.22 0.12
0.12 12.0
12.0 0.75
0.75 0.44
0.44 8.14 20.25
8.14 20.25 4.35
4.35 14.17
14.17 1.375
1.375 1.250
1.250
L213TP12/L215TP12 24.62 9.13 8.25 0.22 0.12 12.0 0.75 0.44 8.14 20.25 4.35 14.17 1.375 1.250
L254TP10/L256TP10 27.85
L254TP10/L256TP10 27.85 9.13 8.25 8.25 0.22 0.12 10.0 0.98 0.44 9.41 23.38 4.50 17.72 1.375 1.250
L254TP10/L256TP10 27.859.13 9.13 8.25 0.22
0.22 0.12
0.12 10.0
10.0 0.98
0.98 0.44
0.44 9.419.4123.3823.384.50 4.50
17.72 17.72
1.375 1.375
1.250 1.250
L254TP12/L256TP12
L254TP12/L256TP12
L254TP12/L256TP1227.85
27.85 9.13
27.859.13 8.25
9.13 8.25
8.25 0.22
0.22
0.22 0.12
0.12
0.12 12.0
12.0
12.0 0.98
0.98
0.98 0.44 9.419.41
0.44
0.44 9.4123.3823.38
23.38
4.50 4.50
4.50
17.72 17.72
17.72
1.375 1.375
1.375
1.250 1.250
1.250
L254TP16/L256TP16
L254TP16/L256TP16
L254TP16/L256TP1627.85
27.85 14.75
27.8514.75 13.50
14.75 13.50
13.50 0.22
0.22
0.22 0.12
0.12
0.12 16.5
16.5
16.5 0.98
0.98
0.98 0.69 9.419.41
0.69
0.69 9.4123.3823.38
23.38
4.50 4.50
4.50
17.72 17.72
17.72
1.375 1.375
1.375
1.250 1.250
1.250
L284TP10/L286TP10
L284TP10/L286TP10
L284TP10/L286TP10 29.25
29.25 9.13
29.259.13 8.25
9.13 8.25
8.25 0.22
0.22
0.22 0.31
0.31
0.31 10.0
10.0
10.0 0.98
0.98
0.98 0.440.4410.19
0.44 10.19
10.19 24.75
24.7524.75
4.50 4.50
20.71
4.50 20.71
1.375
20.71 1.375
1.250
1.375 1.250
1.250
L284TP12/L286TP12
L284TP12/L286TP12
L284TP12/L286TP12 29.25
29.25 9.13
29.259.13 8.25
9.13 8.25
8.25 0.22
0.22
0.22 0.31
0.31
0.31 12.0
12.0
12.0 0.98
0.98
0.98 0.440.4410.19
0.44 10.19
10.19 24.75
24.7524.75
4.50 4.50
20.71
4.50 20.71
1.375
20.71 1.375
1.250
1.375 1.250
1.250
L284TP16/L286TP16
L284TP16/L286TP16
L284TP16/L286TP16 29.2529.259.13
29.25 9.13 13.50
9.13 13.50
13.50 0.22
0.22
0.22 0.31
0.31
0.31 16.5
16.5
16.5 0.98
0.98
0.98 0.690.6910.19
0.69 10.19
10.19 24.7524.75
4.50
24.75 20.71
4.50
4.50 1.375
20.71
20.71 1.250
1.375
1.375 1.250
1.250
L324TP12/L326TP1232.73
L324TP12/L326TP12 32.73 9.13
9.13 8.25
8.25 0.28
0.28 0.25
0.25 12.0
12.0 0.98
0.98 0.440.4413.4413.4428.2228.22
4.40 22.36
4.40 1.875
22.36 1.750
1.875 1.750
L324TP12/L326TP12 32.73 9.13 8.25 0.28 0.25 12.0 0.98 0.44 13.44 28.22 4.40 22.36 1.875 1.750
L324TP16/L326TP16 32.73 14.75 13.50 0.28 0.25 16.5 0.98 0.69
L324TP16/L326TP16
L324TP16/L326TP16 32.73 14.75
32.73 14.75 13.50
13.50 0.28
0.28 0.25
0.25 16.5
16.5 0.98
0.98 0.6913.44
0.69 13.44
13.44
28.22 4.40
28.22
28.22
22.36
4.40
4.40
1.875
22.36
22.36
1.750
1.875
1.875 1.750
1.750
L364TP12/L365TP12 35.95 9.13 8.25 0.28 0.25 12.0 0.98 0.44 16.12 31.16 4.52 24.80 1.875 1.750
L364TP12/L365TP12 35.95
L364TP12/L365TP12 35.95 9.13 8.25 8.25 0.28 0.25 12.0 0.98 0.44 16.12
16.12 31.1631.16 4.52 24.80 1.875 1.750
L364TP16/L365TP16 35.959.13 14.75 13.50 0.28
0.28 0.25
0.25 12.0
16.5 0.98
0.98 0.44
0.69 16.12 31.16 4.52 4.52
24.80 24.80
1.875 1.875
1.750 1.750
L364TP16/L365TP16
L364TP16/L365TP16 35.95
35.95 14.75 13.50 0.28 0.25 16.5 0.98 0.69 16.12 31.16 4.52 24.80 1.875 1.750
L404TP16/L405TP16 42.0514.75
14.75 13.50
13.50 0.28
0.28 0.25
0.25 16.5
16.5 0.98
0.98 0.69 15.68
0.69 16.1236.9431.164.40 4.52
27.87 24.80
2.000 1.875
1.938 1.750
L404TP16/L405TP16
L404TP16/L405TP16
L404TP20/L405TP2042.05
42.05 14.75
42.0514.75 13.50
14.75 13.50
13.50 0.28
0.28
0.28 0.25
0.25
0.25 16.5
16.5
20.0 0.98
0.98
0.98 0.6915.68
0.69
0.69 15.68
15.68 36.94
36.9436.94
4.40 4.40
4.40
27.87 27.87
27.87
2.000 2.000
2.000
1.938 1.938
1.938
L404TP20/L405TP20
L404TP20/L405TP20
L444TP16/L445TP1642.05
42.05 14.75
50.1114.75 13.50
14.75 13.50
13.50 0.28
0.28
0.28 0.25
0.25
0.28 20.0
20.0
16.5 0.98
0.98
1.16 0.6921.83
0.69
0.69 15.68
15.68 36.94
44.7836.94
4.40 4.40
4.40
31.40 27.87
27.87
2.000 2.000
2.000
1.938 1.938
1.938
L444TP16/L445TP16
L444TP20/L445TP20
L444TP16/L445TP16 50.11
50.11 14.75
50.1114.75 13.50
14.7513.50
13.50 0.28
0.28
0.28 0.28
0.28
0.28 16.5
20.5
16.5 1.16
1.16
1.16 0.690.6921.83
0.69 21.83
21.83 44.78
44.7844.78
4.40 4.40
31.40
4.40 31.40
2.000
31.40 2.000
1.938
2.000 1.938
1.938
L444TP20/L445TP20
L444TP24/L445TP24
L444TP20/L445TP20 50.11
50.11 14.75
50.1114.75 13.50
14.7513.50
13.50 0.28
0.28
0.28 0.28
0.28
0.28 20.5
24.0
20.5 1.16
1.16
1.16 0.690.6921.83
0.69 21.83
21.83 44.78
44.7844.78
4.40 4.40
31.40
4.40 31.40
2.000
31.40 2.000
1.938
2.000 1.938
1.938
L447TP20 50.11
L444TP24/L445TP24
L444TP24/L445TP24 50.0014.75
50.11 14.7513.50
14.75 13.50
13.50 0.28
0.28
0.28 0.28
0.28
0.28 20.0
24.0
24.0 1.16
1.16
1.16 0.690.6927.80
0.69 21.83
21.83 44.7844.78
5.18
44.78 31.40
4.40
4.40 2.625
31.40
31.40 2.560
2.000
2.000 1.938
1.938
L449TP20*
L447TP20 55.0014.75
50.00 14.75 13.50
13.50 0.28
0.28 0.28
0.28 20.0
20.0 1.16
1.16 0.690.6927.8027.8049.7544.785.18 31.40
5.18 2.625
31.40 2.560
2.625 2.560
L447TP20 50.00 14.75 13.50 0.28 0.28 20.0 1.16 0.69 27.80 44.78 5.18 31.40 2.625 2.560
L449TP20** 61.94 14.75 13.50 0.25 0.25 20.0 1.00 0.69
L449TP20*
L449TP20* 55.00
55.00 14.75 13.50
14.75 13.50 0.28
0.28 0.28
0.28 20.0
20.0 1.16
1.16 0.6921.75
0.69 27.80
27.80
55.80
49.75
4.38
49.75 31.44
5.18
5.18
-
31.40
31.40 2.625
2.625
- 113
2.560
2.560
L509TP24 66.32 14.75 13.50 0.25 0.25 24.5 1.40 0.69 23.50 59.90 4.88 28.60 - - 114
L449TP20**
L449TP20** 61.94 14.75
61.94 14.75 13.50
13.50 0.25
0.25 0.25
0.25 20.0
20.0 1.00
1.00 0.69
0.69 21.75
21.75 55.80
55.80 4.38
4.38 31.44
31.44 - - - - 113
113
L509TP24
L509TP24 66.32 14.75
66.32 14.75 13.50
13.50 0.25
0.25 0.25
0.25 24.5
24.5 1.40
1.40 0.69
0.69 23.50
23.50 59.90
59.90 4.88
4.88 28.60
28.60 -- -- 114
114

Conduit Box Dimensions (dimensions in inches)

ConduitBox Frame Size (dimensions in inches)

BoxDimensions
Dimensions AA AB AC XL XN Notes
Conduit (dimensions in inches)
L213TP10/L215TP10 1.0 9.30 7.20 6.80 2.60
L254TP10/L256TP10
FrameSize
Size 1.5
AA 10.97
AB 8.46AC 7.76 XL 5.67 XN Notes
Frame AA AB AC XL XN Notes
L254TP12/L256TP12
L213TP10/L215TP10 1.5
1.0 10.97
9.30 8.467.20 7.76 6.80 5.67 2.60
L213TP10/L215TP10 1.0 9.30 7.20 6.80 2.60
L284TP12/L286TP12 1.5 14.60 10.83 9.20 8.11
L254TP10/L256TP10
L254TP10/L256TP10 1.5
1.5 10.97
10.97 8.46
8.46 7.76
7.76 5.67
5.67
L284TP16/L286TP16 1.5 14.60 10.83 9.20 8.11
L254TP12/L256TP12
L254TP12/L256TP12 1.5
1.5 10.97
10.97 8.46
8.46 7.76
7.76 5.67
5.67
L324TP12/L326TP12 1.5 14.68 11.85 8.38 8.11
L284TP12/L286TP12
L284TP12/L286TP12 1.5
1.5 14.60
14.60 10.83
10.83 9.20 8.11
L324TP16/L326TP16 1.5 14.68 11.85 8.389.20 8.11 8.11
L284TP16/L286TP16
L284TP16/L286TP16
L364TP12/L365TP12 1.5
1.5
2.5 14.60
14.60
15.78 10.83
10.83
12.91 9.20
8.389.20 8.11 8.11
8.11
L324TP12/L326TP12
L324TP12/L326TP12
L364TP16/L365TP16 1.5
1.5
2.5 14.68
14.68
15.78 11.85
11.85
12.91 8.38
8.388.38 8.11 8.11
8.11
L324TP16/L326TP16
L404TP16/L405TP16
L324TP16/L326TP16 1.5
2.5
1.5 14.68
20.90
14.68 11.85
16.06
11.85 8.38
15.758.38 10.55 8.11
8.11
L364TP12/L365TP12
L444TP16/L445TP16
L364TP12/L365TP12 2.5
2.5
2.5 15.78
21.65
15.78 12.91
16.81
12.91 8.38
16.628.38 11.26 8.11
8.11
L444TP20/L445TP20
L364TP16/L365TP16 2.5
2.5 21.65
15.78 16.81
12.91 16.62 8.38 11.26 8.11
L364TP16/L365TP16 2.5 15.78 12.91 8.38 8.11
L447TP20
L404TP16/L405TP16 3.5
2.5 21.65
20.90 16.81
16.06 16.6215.75 11.26 10.55
L404TP16/L405TP16 2.5 20.90 16.06 15.75 10.55
L449TP20* 3.5 21.65 16.81 16.62 11.26
L444TP16/L445TP16
L444TP16/L445TP16 2.5
2.5 21.65
21.65 16.81
16.81 16.62
16.62 11.26
11.26
L449TP20** Qty 2 of 4"-8 21.57 16.68 12.39 17.00 113
L444TP20/L445TP20
L444TP20/L445TP20 2.5 21.65 16.81 16.62 11.26
L509TP24 Qty2.5
2 of 4"-8 21.65
31.87 16.81
26.48 23.8416.62 13.00 11.26 114
L447TP20
L447TP20 3.5
3.5 21.65
21.65 16.81
16.81 16.62
16.62 11.26
11.26
Notes: L449TP20* 3.5 21.65 16.81 16.62 11.26
L449TP20* 3.5 21.65 16.81 16.62 11.26
113 Dimensions in this row apply to the 250HP and 300HP ratings only
L449TP20**
114 L449TP20**
Qty
Qty
Dimensions in this row apply to
2ofof4"-8
the2350HP
4"-8 21.57
and 400HP21.57
ratings only
16.68
16.68 12.39
12.39 17.00
17.00 113
113
L509TP24
WeightsL509TP24
and Qty22only.
dimensions are for estimating
Qty ofof4"-8
4"-8 31.87
31.87 26.48
26.48 23.84
23.84 13.00
13.00 114
114
Notes:
Notes:
113 Dimensions
113 Dimensionsininthis
thisrow
rowapply
applytotothe
the250HP
250HPand
and300HP
300HPratings
ratingsonly
only
114 Dimensions
114 Dimensionsininthis
thisrow
rowapply
applytotothe
the350HP
350HPand
and400HP
400HPratings
ratingsonly
only
8.4 and dimensions are for estimating only.
Weights Data subject to change without notice. GEP-500U 01/10
Weights and dimensions are for estimating only.
[Link]
800 541 7191

8.4
8.4 Datasubject
Data subjectto
tochange
changewithout
withoutnotice.
[Link]-500U
GEP-500U01/10
01/10
[Link]
[Link]
800541
800 5417191
7191
Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191
GE Energy Section 7 – Pump Motors

GE Energy Section 8 – Pump Motors

Vertical
Value Vertical
Line™ Vertical Hollow Shaft
Weather
ValueProtection I Hollow Shaft
Line™ Vertical
Ball Style Non-Reverse
Weather Protection Ratchet
I
Ball Style Non-Reverse Ratchet
Kits and Accessories
Kits and Accessories
5 to 300HP Coupling (Specify size of coupling with order)
Coupling (Specify size of coupling with order)

Dimensions in Inches
Frame List Price Norm.
Size Cat. No. Price Symbol Stk. BX Depth EW XG BY BZ XM XR
Y8454 $168 G5-7KITS Y 1.001 0.140 0.250 1.75 10-32 UNF 1.375 0.39 1.65 7.5
210TP
Y8513 $168 G5-7KITS Y Blank coupling must be machined to proper dimensions
Y8457 $176 G5-7KITS Y 1.001 0.140 0.250 10-32 UNF 1.375

Value Line™ Pump Motor

Y8458 $176 G5-7KITS Y 1.188 0.140 0.250 1.75 1/4 -20 0.39 1.65
250TP 1.750
Y8459 $176 G5-7KITS Y 1.251 0.140 0.250 UNC

Y8514 $176 G5-7KITS Y Blank coupling must be machined to proper dimensions

Y8462 $180 G5-7KITS Y 1.001 0.140 0.250 10-32 UNF 1.375
Y8463 $180 G5-7KITS Y 1.188 0.140 0.250 1.75 1/4 -20 0.39 1.85
280TP 1.750
Y8464 $180 G5-7KITS Y 1.251 0.140 0.250 UNC

Y8515 $180 G5-7KITS Y Blank coupling must be machined to proper dimensions

Y8520 $732 G5-7KITS Y 1.001 0.140 0.250 10-32 UNF 1.375
Y8521 $732 G5-7KITS Y 1.188 0.140 0.250
Y8522 $732 G5-7KITS Y 1.251 0.140 0.250 1.750
320TP N/A 1/4 -20 0.47 1.61
Y8523 $732 G5-7KITS Y 1.251 0.140 0.375
360TP UNC
Y8524 $732 G5-7KITS Y 1.438 0.140 0.375
2.120
Y8525 $732 G5-7KITS Y 1.501 0.140 0.375
Y8526 $732 G5-7KITS Y Blank coupling must be machined to proper dimensions
Y8527 $845 G5-7KITS Y 1.188 0.140 0.250
1.750
Y8528 $845 G5-7KITS Y 1.251 0.140 0.375
Y8529 $845 G5-7KITS Y 1.438 0.140 0.375 1/4 -20
N/A 2.120 0.63 2.43
400TP Y8530 $845 G5-7KITS Y 1.501 0.140 0.375 UNC

Y8531 $845 G5-7KITS Y 1.688 0.203 0.375

2.500
Y8532 $845 G5-7KITS N 1.751 0.203 0.375
Y8533 $845 G5-7KITS Y Blank coupling must be machined to proper dimensions
Y8534 $900 G5-7KITS N 1.188 0.140 0.250 1.750
Y8537 $900 G5-7KITS Y 1.501 0.140 0.375 2.120
1/4 -20
Y8538 $900 G5-7KITS Y 1.688 0.203 0.375 N/A 0.63 2.22
440TP UNC
Y8539 $900 G5-7KITS Y 1.751 0.203 0.375 2.500
Y8540 $900 G5-7KITS N 1.938 0.203 0.375
Y8541 $900 G5-7KITS Y Blank coupling must be machined to proper dimensions
Y8563 $1,125 G5-7KITS Y 1.501 0.168 0.375 2.125
1/4 -20 0.55
Y8564 $1,125 G5-7KITS Y 1.688 0.171 0.375
UNC 2.500
447TP Y8566 $1,125 G5-7KITS Y 1.938 0.222 0.500 N/A 2.22
449TP Y8570 $1,125 G5-7KITS Y 2.188 0.500 0.67
3/8 -16
0.226 3.250
Y8571 $1,125 G5-7KITS Y 2.251 0.500 UNC

Y8575 $1,125 G5-7KITS Y Blank coupling must be machined to proper dimensions

(Table continued on next page)

8.5 Data subject to change without notice. GEP-500U 01/10

[Link]
800 541 7191

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GE Energy Section 7 – Pump Motors

Vertical
Value Line™ Vertical Hollow Shaft
Weather Protection I
Pin Style Non-Reverse Ratchet
Kits and Accessories (cont.)

350HP, 400HP and 500HP Coupling Kits for Catalog Numbers V850, V851 and V852

Non-Reverse Ratchet Assembly Dimensions in Inches

BY - 4 Holes

Frame Cat. List Price Norm. 45˚

7.6 Size No. Part Number Price Symbol Stk. BX Depth EW XG BY BZ XM XR
Y8440 192B9950BL-G13 $1,125 G6-7KITS Y 1.501 2.13
Y8435 192B9950BL-G12 $1,125 G6-7KITS Y 1.688 0.180 0.375 0.562
Value Line™ Pump Motor

BZ Dia.
1/4-
Y8439 192B9950BL-G11 $1,125 G6-7KITS N 1.751 XG
UNC 2.50
Y8441 192B9950BL-G10 $1,125 G6-7KITS N 1.813
Y8442 192B9950BL-G09 $1,125 G6-7KITS Y 1.938 0.230
XM
Y8444 192B9950BL-G08 $1,125 G6-7KITS N 2.001
L449TP Y8446 192B9950BL-G07 $1,125 G6-7KITS N 2.063 4.75 5.25
0.500 0.688
Y8447 192B9950BL-G06 $1,125 G6-7KITS N 2.126 XR
0.235
Y8448 192B9950BL-G05 $1,125 G6-7KITS Y 2.188 3/8-
3.25
Y8451 192B9950BL-G04 $1,125 G6-7KITS N 2.251 UNC

Y8453 192B9950BL-G03 $1,125 G6-7KITS N 2.376 0.285 BX

Dia

Y8455 192B9950BL-G02 $1,125 G6-7KITS N 2.438 0.290

0.625 0.812
Y8460 192B9950BL-G01 $1,125 G6-7KITS N 2.501 0.250
Y8432 192B9950BN-G12 $1,425 G6-7KITS N 1.501 2.125
Y8436 192B9950BN-G11 $1,425 G6-7KITS N 1.688 0.180 0.375 0.562
1/4-
Y8467 192B9950BN-G10 $1,425 G6-7KITS N 1.751
UNC 2.50
Y8443 192B9950BN-G09 $1,425 G6-7KITS N 1.813
Y8445 192B9950BN-G08 $1,425 G6-7KITS Y 1.938 0.230
Y8449 192B9950BN-G07 $1,425 G6-7KITS N 2.001 0.500 0.688
L509TP 5.62 5.25
Y8450 192B9950BN-G06 $1,425 G6-7KITS Y 2.188
0.235 3.25
Y8452 192B9950BN-G05 $1,425 G6-7KITS N 2.251
3/8-
Y8456 192B9950BN-G04 $1,425 G6-7KITS N 2.438
UNC
Y8461 192B9950BN-G03 $1,425 G6-7KITS N 2.501
0.290 0.625 0.812
Y8465 192B9950BN-G02 $1,425 G6-7KITS N 2.688 3.75
Y8466 192B9950BN-G01 $1,425 G6-7KITS N 2.751

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

GE Energy Section 7 – Pump Motors

Vertical
Value Line™ Vertical Hollow Shaft
Weather Protection I
Ball Style Non-Reverse Ratchet
Kits and Accessories (cont.)

Optional Stabilizer/Steady Bushing 7.7

Cat. List Price Dim. in Inches

Value Line™ Pump Motor

Frame Size No. Price Symbol A BX Norm. Stk.
210TP/250TP Y8284 $110 G5-7KITS 1.76 1.001 Y
Y8292 $107 G5-7KITS 2.17 1.001 Y
280TP Y8291 $107 G5-7KITS 2.17 1.188 Y
Y8290 $107 G5-7KITS 2.17 1.251 Y
Y8301 $135 G5-7KITS 2.36 1.001 Y
Y8298 $135 G5-7KITS 2.36 1.188 Y
320TP Y8297 $135 G5-7KITS 2.36 1.251 Y
Y8296 $135 G5-7KITS 2.36 1.438 Y
Y8295 $135 G5-7KITS 2.36 1.501 Y
Y8307 $135 G5-7KITS 2.56 1.001 Y
Y8305 $135 G5-7KITS 2.56 1.188 Y
360TP Y8304 $135 G5-7KITS 2.56 1.251 Y
Y8303 $135 G5-7KITS 2.56 1.438 Y
Y8302 $135 G5-7KITS 2.56 1.501 Y
Y8360 $141 G5-7KITS 2.64 1.188 Y
Y8312 $141 G5-7KITS 2.64 1.251 Y
Y8311 $141 G5-7KITS 2.64 1.438 Y
400TP/440TP
Y8310 $141 G5-7KITS 2.64 1.501 Y
Y8309 $141 G5-7KITS 2.64 1.688 Y
Y8308 $141 G5-7KITS 2.64 1.751 Y
Y8384 $236 G5-7KITS 3.43 1.501 Y
Y8385 $236 G5-7KITS 3.43 1.688 Y
447TP/449TP
(250HP and Y8387 $236 G5-7KITS 3.43 1.938 Y
300HP only)
Y8391 $236 G5-7KITS 3.43 2.188 Y
Y8392 $236 G5-7KITS 3.43 2.251 Y

Notes:
Contact GE Motors for coupling part numbers for the 350HP, 400HP and 500HP ratings only.

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GE Energy Section 7 – Pump Motors

Vertical
Solid Shaft Inline Pump
TEFC- Severe Duty
Standard Features

HP Range 3–40
Poles 2, 4
Voltage 230/460
Agency Approvals UL - Component and Insulation System Recognition, CSA - Motors
7.8
Altitude 3300 ft
Ambient 40ºC
Balance/Vibration 0.15 in/sec max
Bearing Caps Yes
Vertical Inline

Bearing Protection Shaft Slinger

Bearing Type Guide Bearing: Deep Groove Ball Bearing; Thrust Bearing: Double Row Angular Contact Ball Bearing
Conduit Box Cast Iron
Coupling Not available on this product construction
Efficiency Premium - EPAct +
End Shield Cast Iron
Fasteners SAE
Frame Material Cast Iron
Frame Size L182LP10-L324LP16
Frequency 60 Hz (De-rated at 50 Hz and noted on the nameplate)
Grease/Oil All Guide and 213-286 Thrust Bearings: Polyurea, 324-326 Thrust Bearings: Oil
Ground Brass Bolt in Conduit Box
Insulation Class F
Insulation System Non-Hygroscopic, Anti-Fungus, Meets NEMA MG1-31 for variable frequency drives
Inverter Capabilities INF:1 Variable torque
L10 Bearing Life 8760 hrs
Lifting Means Yes
Mounting Vertical P-Base
Mounting Holes Per NEMA
Nameplate Stainless Steel
NEMA Design B
Paint Buff, Epoxy ester
Relubrication Yes
Rotor Cast Aluminum
Service Factor 1.15
Temperature Rise 80ºC @ 1.0 SF
Tests NEMA Routine, IEEE 112 Method B
Time Rating Continuous
Top Hat Steel
Warranty 12 months from date of installation or 18 months from date of manufacture, whichever occurs first

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

GE Energy Section 7 – Pump Motors

Vertical
Solid Shaft Inline Pump
TEFC- Severe Duty
Pricing

Three Phase - Totally Enclosed Fan Cooled - Severe Duty - Inline Pump

Volts: 230/460
HP: 3-40 o

Down 7.9
NEMA Nom. Cat. Multiplier Norm. Wt.. Thrust C Dim.
HP RPM Volts Frame SF FLA @ NP Eff. No. List Price Symbol Stk. (lbs) (lbs) (In.). Notes
3 3600 230/460 L182LP10 1.15 7.8/3.9 87.5 V824 $2,058 G6-7VIL N 76 1014 18.18 CI
3 1800 230/460 L182LP10 1.15 7.8/3.9 89.5 V833 $2,058 G6-7VIL N 76 1272 18.18 CI

Vertical Inline
5 3600 230/460 L184LP10 1.15 12.4/6.2 90.2 V825 $2,608 G6-7VIL N 101 1014 18.18 CI
5 1800 230/460 L184LP10 1.15 12.8/6.4 89.5 V834 $2,236 G6-7VIL N 101 1272 18.18 CI
7.5 3600 230/460 L213LP10 1.15 17.2/8.6 90.2 V826 $2,906 G6-7VIL N 200 860 22.34 CI
7.5 1800 230/460 L213LP10 1.15 18.0/9.0 91.0 V835 $2,852 G6-7VIL N 200 1075 22.34 CI
10 3600 230/460 L215LP10 1.15 22.4/11.2 91.0 V827 $3,208 G6-7VIL N 220 860 22.34 CI
10 1800 230/460 L215LP10 1.15 24.0/12.0 91.0 V836 $3,138 G6-7VIL N 220 1075 22.34 CI
15 3600 230/460 L254LP10 1.15 34.6/17.3 91.7 V828 $3,628 G6-7VIL N 315 1076 27.33 CI
15 1800 230/460 L254LP10 1.15 36.6/18.3 92.4 V837 $3,816 G6-7VIL N 315 1340 22.34 CI
20 3600 230/460 L256LP10 1.15 45.8/22.9 91.7 V829 $4,078 G6-7VIL N 350 1076 27.33 CI
20 1800 230/460 L256LP10 1.15 48.0/24.0 92.4 V838 $4,246 G6-7VIL N 350 1348 27.33 CI
25 3600 230/460 L284LP10 1.15 55.8/27.9 92.4 V830 $4,562 G6-7VIL N 460 1316 31.66 CI
25 1800 230/460 L284LP10 1.15 58.2/29.1 93.6 V839 $4,836 G6-7VIL N 460 1639 31.66 CI
30 3600 230/460 L286LP10 1.15 67.2/33.6 92.4 V831 $4,920 G6-7VIL N 510 1316 31.66 CI
30 1800 230/460 L286LP10 1.15 69.0/34.5 93.6 V840 $5,324 G6-7VIL N 510 1639 31.66 CI
40 3600 230/460 L324LP16 1.15 98.8/49.4 93.0 V832 $9,420 G6-7VIL N 650 2329 41.07 CI, 92
40 1800 230/460 L324LP16 1.15 98.8/49.4 93.6 V841 $8,534 G6-7VIL N 730 2883 41.07 CI, 92

Notes:
CI Cast Iron
92 Oil lubrication upper and lower bearings

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GE Energy Section 78 –– Pump
Pump Motors
Motors

Vertical
Vertical
SolidShaft
Solid Shaft Inline
Inline Pump
Pump
TEFC—Severe
TEFC- Severe DutyDuty
Dimensions
Dimensions

7.10
Vertical Inline

Dimensions in Inches

High Thrust VP Shaft Inline LP Shaft AG

Frame U EU AH U EU AH WPI TEFC
L182/L184 1.125 0.875 2.75 1.125 0.875 2.75 14.69 15.67
L213/L215 1.125 0.875 2.75 1.625 1.250 2.75 16.55 23.60
L254/L256 1.125 0.875 2.75 1.625 1.250 2.75 20.93 28.25
L284/L286 1.125 0.875 2.74 2.125 1.750 4.50 23.00 30.50
L324/L326 1.625 1.250 4.50 2.125 1.750 4.50 36.93 36.99

L364/L365 1.625 1.250 4.50 2.125 1.750 4.50 40.28 40.88

L404/L405 1.625 1.250 4.50 2.125 1.750 4.50 45.30 46.56

L444/L445 2.125 1.750 4.50 2.125 1.750 4.50 42.86 53.40

L449 2.125 1.750 4.50 2.125 1.750 4.50 51.36 61.90

Notes:
Inline motors are only available in TEFC construction

8.9 Data subject to change without notice. GEP-500U 01/10

[Link]
Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191 800 541 7191
GE Energy Section 7 – Pump Motors

Fire Pump Motor

Standard Features

HP Range 20-200
Poles 2, 4
Voltage 230/460, 460
Agency Approvals UL - Component and Insulation System Recognition, CSA - Motors and C-390
7.11
Altitude 3300 ft
Ambient 40°C
Balance/Vibration 0.150 in/sec max

Fire Pump Motor

Bearing Caps 284TS-286TS and 324-445
Bearing Type Ball, 184T-286T Shielded; 284TS-286TS and 324-445 Open
Conduit Box Stamped Steel, rotatable
Efficiency EPAct through 150HP
End Shield Cast Iron
Fasteners Metric, ISO 8.8
Frame Material Cast Iron
Frame Size 254T - 445T
Frequency 60
Grease 254T-286T: Multitemp Lithium, 284TS-286TS and 324-445: Polyuera
Ground Brass Bolt in Conduit Box
Insulation Class F
Insulation System Non-Hygroscopic, Anti-Fungus, meets NEMA MG1-31
Inverter Capabilities N/A
L10 Bearing Life Direct Coupled: 65,000 hrs, Belted: 25,000 hrs
Lifting Means Eye Bolt
Mounting F1
Mounting Holes 2 per foot
Nameplate Stainless Steel
NEMA Design B
Paint Gray, Polyurethane
Relubrication 284TS-286TS and 324-445
Rotor Cast Aluminum
Service Factor 1.15
Temperature Rise 80°C @ 1.0SF
Tests NEMA Routine, IEE112B
Time Rating Continuous
Warranty 12 months from date of installation or 18 months from date of manufacture, whichever occurs first

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

 GE Energy Section 7 – Pump Motors

Fire Pump Motor

Open Dripproof
Pricing

Volts: 230/460, 460

HP: 5-200 o

Norm. Wt.. C Dim.

HP RPM Volts Frame FLA Nom. Eff. Cat. No. List Price Price Symbol Stk. (lbs) (In.). Notes
20 3600 230/460 254T 45.4/22.7 90.2 S3620 $1,913 G4-7DEF N 260 20.45 130
20 1800 230/460 256T 47.4/23.7 91.0 S3605 $1,907 G4-7DEF N 310 22.40 124
7.12 25 3600 230/460 256T 56.4/28.2 91.0 S3621 $2,240 G4-7DEF N 307 22.19 130
25 1800 230/460 284T 59.8/29.9 91.0 S3606 $2,237 G4-7DEF N 394 23.82 124
30 3600 230/460 284T 68.7/34.3 91.0 S3622 $2,490 G4-7DEF N 378 23.43 130
30 1800 230/460 286T 70.6/35.3 92.4 S3607 $2,483 G4-7DEF N 436 25.32 124
Fire Pump Motor

40 3600 230/460 286T 90.5/45.2 91.7 S3623 $2,925 G4-7DEF N 406 24.93 130
40 1800 230/460 324T 92.6/46.3 93.0 S3608 $2,888 G4-7DEF N 575 26.26 124
50 3600 230/460 324T 113.2/56.6 92.4 S3624 $4,028 G4-7DEF N 595 26.05 130
50 1800 230/460 326T 115.6/57.8 93.0 S3609 $3,348 G4-7DEF N 575 27.76 124
60 3600 230/460 326T 135.8/67.9 93.0 S3625 $4,478 G4-7DEF N 661 27.54 130
60 1800 230/460 364TS 140.4/70.2 93.6 S3610 $4,157 G4-7DEF N 730 27.00 124
75 3600 230/460 364TS 165.8/82.9 93.0 S3626 $4,946 G4-7DEF N 674 27.00 130
75 1800 230/460 365TS 173.4/86.7 94.1 S3611 $5,018 G4-7DEF N 838 28.00 124
100 3600 230/460 365TS 220.1/110.0 93.0 S3627 $6,390 G4-7DEF N 763 28.00 130
100 1800 230/460 404TS 228.0/114.0 94.1 S3612 $6,413 G4-7DEF N 1045 30.10 124
125 3600 230/460 404TS 283.0/141.7 93.6 S3628 $7,572 G4-7DEF N 1031 30.10 130
125 1800 230/460 405TS 278.0/139.0 94.5 S3613 $7,652 G4-7DEF N 1225 31.60 124
150 3600 460 405TS 168.5 93.6 S3629 $9,525 G4-7DEF N 1124 31.60 131
150 1800 460 444TS 167.0 95.0 S3614 $10,058 G4-7DEF N 1430 33.95 125
200 3600 460 444TS 219.3 94.5 S3630 $14,025 G4-7DEF N 1510 33.95 131
200 1800 460 445TS 220.0 95.0 S3615 $13,184 G4-7DEF N 1610 35.95 125

Notes:
124 Usable on 190/380V, 50Hz, same HP at 1.0 service factor
125 Usable on 380V, 50Hz, same HP at 1.0 service factor
130 Usable on 190/380V, 50Hz, next lower HP at 1.15 service factor
131 Usable on 380V, 50Hz, next lower HP at 1.15 service factor

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191

GE Energy Section 7 – Pump Motors
GE Energy Section 8 – Pump Motors

FirePump
Fire PumpMotor
Motor
OpenDripproof
Open Dripproof
Dimensions
Dimensions

7.13

Fire Pump Motor

NEMA Frame D 2E 2F BA H N Min. U V Min. Key Width Key Thickness Key Length
184T 4.50 7.5 5.50 2.75 0.41 Dia. 2.75 1.12 2.50 0.25 0.25 1.75
213T 5.25 8.5 5.50 3.50 0.41 Dia. 3.38 1.38 3.12 0.31 0.31 2.38
215T 5.25 8.5 7.00 3.50 0.41 Dia. 3.38 1.38 3.12 0.31 0.31 2.38
254T 6.25 10.0 8.25 4.25 0.53 Dia. 4.00 1.62 3.75 0.38 0.38 2.88
256T 6.25 10.0 10.00 4.25 0.53 Dia. 4.00 1.62 3.75 0.38 0.38 2.88
284T 7.00 11.0 9.50 4.75 0.53 Dia. 4.62 1.88 4.38 0.50 0.50 3.25
286T 7.00 11.0 11.00 4.75 0.53 Dia. 4.62 1.88 4.38 0.50 0.50 3.25
324T 8.00 12.5 10.50 5.25 0.66 Dia. 5.25 2.12 5.00 0.50 0.50 3.88
326T 8.00 12.5 12.00 5.25 0.66 Dia. 5.25 2.12 5.00 0.50 0.50 3.88
364TS 9.00 14.0 11.25 5.88 0.69 Dia. 3.75 1.88 3.50 0.50 0.50 2.00
365TS 9.00 14.0 12.25 5.88 0.69 Dia. 3.75 1.88 3.50 0.50 0.50 2.00
404TS 10.00 16.0 12.25 6.62 0.81 Dia. 4.25 2.12 4.00 0.50 0.50 2.75
405TS 10.00 16.0 13.75 6.62 0.81 Dia. 4.25 2.12 4.00 0.50 0.50 2.75
444TS 11.00 18.0 14.50 7.50 0.81 Dia. 4.75 2.38 4.50 0.62 0.62 3.00
445TS 11.00 18.0 16.50 7.50 0.81 Dia. 4.75 2.38 4.50 0.62 0.62 3.00

Notes:
“C” Dimension is overall length and is shown for each catalog number on rating pages. All dimensions in inches.
All dimensions are nominal. Request factory outlines for exact dimensions.

8.12 Data subject to change without notice. GEP-500U 01/10

[Link]
Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191 800 541 7191
 GE Energy Section 7 – Pump Motors

Notes

7.14
Pump Motors

Data subject to change without notice. GEP-500W 08/12 • [Link] • 800-541-7191