LERWIN DELA CRUZ

Name: __________________ b.700 mm c.3.7 m

c.600 mm d.15.2 m
PREBOARD Final GSDQ2019 d.650 mm
Plumbing Code P1 14. The minimum distance between
August 8-10, 2019 7. According to Accessibility Law, pressure public water main and
urinals shall be of the wall-hung septic tank.
type and should have elongated lip; a.1.5 m
1. Can be used as soil, waste, the maximum height of the lip b.3.0 m
ventilation and downspout where should be____from the floor. c.3.7 m
remarkably superior for embedment a.480 mm d.15.2 m
in concrete structure. b.700 mm
a. Cast iron pipe c.600 mm 15. The minimum distance between
b. Ductile iron pipe d.500 mm on site domestic water service line
c. Asbestos cement pipe and building sewer.
d. Vitrified clay pipe 8. The minimum distance required a.0.30 m
between water supply wells and b.0.60 m
2. Is used for a well-fitted hub and disposal fields. c.1.5 m
spigot connections. a.1.5 m d.3.0 m
a. Cast iron standard pipe b.15.2 m
b. Cast iron single hub c.30.5 m 16. The minimum distance between
c. Cast iron hubless pipe d.45.7 m property line adjoining private
d. Cast iron double hub property and seepagepit/cesspool.
9. The minimum distance required a.1.5 m
3. Is preferred when a piece of pipe between water supply wells and b.3.0 m
needed is shorter than 150cm long. building sewer. c.2.4 m
When the pipe is cut, both ends has a.1.5 m d.3.7 m
hub to serve as joint connector. b.15.2 m
a. Cast iron standard pipe c.30.5 m 17. Copper tube shall not be used
b. Cast iron single hub d.45.7 m for piping carrying chemicals or
c. Cast iron hubless pipe industrial.
d. Cast iron double hub 10. The minimum distance between a. False
seepage pit and cesspool. b. True
4. A permit is not required for the a.3.7 m c. May be
repairs that involve only_____. b.1.5 m d. None of the above
a. Relocation of fixtures c.3.0 m
b. The working parts of faucets and d.15.2 m 18. What is the minimum weight of
valves caulking ferrule for 2”pipe?
c. The replacement of water heaters 11. The minimum distance between a.0.454 kg
d. None of the above seepage pit/cesspool and septic tank. b.0.452 kg
a.1.5 m c.0.544 kg
5. What is DOH Administrative b.1.8 m d.0.445 kg
Order No.2007-0012 all about? c.15.2 m
a. Revised Effluent Regulation of d.3.0 m 19. What is the minimum weight of
1990 bushing 4” diameter?
b. Revised Water 12. The minimum distance between a.1.586 kg
Usage/Classification Water Quality seepage pit/cesspool and disposal b.1.865 kg
Criteria field. c.2.586 kg
c. Philippine National Standard for a.1.5 m d.2.856 kg
Effluent Discharge of 2007 b.3.0 m
d. Philippine National Standard for c.3.7 m 20. Materials for soldering nipples.
Drinking Water of 2007 d.15.2 m a. Bronze
b. Copper
6. According to Accessibility Law, 13. The minimum distance between c. Heavy cast red brass
the maximum height of lavatory for distribution box and disposal field? d. All of the above
persons with disabilities is_____? a.1.5 m
a.800 mm b.3.0 m
 28. What type of bacteria requires d. Diagonal pipe
21. Diameter of closet rings or no oxygen for their action in the
closet flanged for water closet. decomposition of sewage. 35. Diameter of an individual vent
a.178 mm a. Aerial bacteria shall not be less than 32mmn or less
b.175 mm b. Anaerobic bacteria than___ the diameter of the drain it
c.176 mm c. Aerobic bacteria connects.
d.200 mm d. None of the above [Link]-fourth
[Link]-half
22. Which of the following is the 29. Interceptor or clarifiers for sand [Link]-third
minimum size of supply pipe for a and similar heavy solid shall have a [Link]-fifth
shower head. water seal of not less than?
a.25 mm a.152 mm 36. What particular section which
b.19 mm b.102 mm mention that the practice of RMP is
c.10 mm c.51 mm limitless in pursuant to RA1378.
d.13 mm d.205 mm a. Section 102.1
b. Section 102.3
23. A cylindrical trap commonly 30. A grease trap is not required for c. Section 102.2
used on the drain pipes of bathtubs a? d. None of the above
and bidet. a. High rise building
a. Running trap b. Resorts 37. A gas that are produced inside
b. P-trap c. individual dwelling units the septic tank that is a by-product
c. Bell trap d. Condominium of methane classified as poisonous
d. Drum trap gas.
31. All pipes passing through of a. Methane
24. What type of vent is used in under cinders or other corrosive b. Carbon monoxide
conjunction with loop vent? materials shall be protected from c. Hydrogen disulfide
a . Unit Vent external corrosion by encasing d. Hydrogen sulfide
b. Circuit Vent with___.
c. Individual Vent a. Jute sack 38. It is caused by anaerobic
d. Back Vent b. Polyethylene sheath bacteria which is sometimes referred
c. Polyvinyl sheath to as putrefaction accompanied by
25. Which fitting is used in joining d. Propylene sheet bad odors.
galvanized steel pipe with plastic a. Decomposition
pipe? 32. What valve is required ahead of b. Stabilization
a. Coupling each water supplied appliances lip c. Digestion
b. Union joints or supply piping for non- d. Sedimentation
c. Tee metallic fixture and appliance.
d. Adapter a. Flow valve 39. A horizontal screwed pipe
b. Angle valve having a size 19mm and smaller in
26. Expansion loop is used in what c. Control gate valve diameter shall be supported
kind of piping system. d. Check valve approximately?
a. Storm Drainage a.1.5 m
b. Cold Water Supply 33. Which of the following is b.1.2 m
c. Hot Water Supply considered suds-producing c.1m
d. Vent Piping fixture/appliance? d.3 m
a. Bathtubs
27. Each grease trap shall have an b. Kitchen sink 40. A horizontal screwed pipe
approved water seal of not less c. Washing machine having a size 25mm and larger in
than____in depth or the diameter of d. All of the these diameter shall be supported
its outlet whichever is greater. approximately?
a.25 mm 34. A pipe which makes an angle of a.1.5 m
b.51 mm more than 45 degrees from the b.1.2 m
c.38 mm vertical axis is considered. c.3.0 m
d.102 mm a. Horizontal pipe d.3.6 m
b. Vertical pipe
c. Sloped pipe
41. A horizontal copper tubing 47. Slaughter houses and packing 53. Factory made screw and of PVC
having a size 38mm and smaller in establishment from which adaptor fittings are acceptable for
diameter shall be supported considerable amount of grease and use if thickness to?
approximately? hair feathers are likely to be a. Schedule 10
a.1.5 m discharge into the plumbing system b. Schedule 40
b.1.8 m shall be connected grease c. Schedule 80
c.3.0 m interceptor through? d. Schedule 160
d.3.6 m a. separator
b. screening device 54. Food waste from restaurant and
42. A horizontal copper tubing c. a pit commercial or industrial sink shall
having a size 51mm and larger in d. classifier be connected in?
diameter shall be supported a. serve by a single trap
approximately? 48. The develop length between the b. separate trap
a.1.5 m trap of a water closet or similar c. combine trap
b.1.8 m fixture measured from the top of a d. none of the above
c.3.0 m closet ring (closet flange) to inner
d.3.6 m edge of vent shall not exceed? 55. Screwed pipe to Cast iron pipe
a.1.5 m shall be either caulked or threaded
43. Grease trap shall be required in b.1.8 m joints shall be made with approved?
an establishments except: c.1.2 m a. Adapter fittings
a. Private living quarters d.1.0 m b. Coupling
b. Café c. Shielded coupling
c. Bars and clubs 49. No cleanout required for trap d. Union patente
d. Hotel arms 76mm in diameter the change
of direction not exceeding? 56. It is recommended for oil
44. It shall be designed that the flow a.22 1/2° handling piping works in
through such device or devices shall b.30° elastomeric gasketed and rubbering-
at no time be greater than the rated c.45° ring joints that comply with the
capacity of the grease trap. d.90° applicable IAPMO Installation
a. Flow control devices Standard.
b. Grease interceptor 50. Valves up to and including a. Neoprene gaskets
c. Backwater valve 51mm in size shall be all? b. Coupling
d. Check valve a. Brass c. Shielded coupling
b. Copper d. Union patente
[Link] water jacketed grease trap or c. Cast bronze
grease interceptor shall be approved d. Lead 57. The inlet and outlet pipe
or installed. connections of manholes shall be
a. True 51. A valves sizes 102mm or larger made by the use of_____no closer
b. False in diameter shall have? than 0.30meter from outside of the
c. May be a. Cast iron manhole.
d. None of the above b. Brass a. Neoprene gasket
c. Bronze metal b. Flexible compression joints
46. An approved type grease trap d. Cast brass c. Shielded coupling
maybe used as a fixture outlet and d. Compression gasket
the grease trap for a single fixture 52. A kind of joints that shall be
when the horizontal distance accessible except for vent and stacks 58. Cleanouts installed under
between the fixture outlet and the and is used in soil and waste stacks concrete or asphalt paving shall be
grease trap does not exceed____and to provide for necessary contraction made accessible by____with hinged
the vertical tailpipe or drain does not joints of the pipes for high rise cover or extending the top cover
exceed____. buildings. with counter
a. 1.2 m , 0.75 m a. Expansion joints a. Strong yard boxes
b. 1.5 m , 0.60 m b. Wiped joints b. Polyethylene sheath
c. 1.8 m , 0.75 m c. lip joints c. Drain field
d. 1.0 m , 0.50 m d. Ground joint d. Flashing
59. It must be periodically removed a. Sewage ejector e. Composition disc valve
and properly disposed off to some b. Catch basin
approved off-site location shall be c. Sump 70. It is a valve that isused on cold
installed when required by the d. Gutter water systems, heating systems,
Administrative Authority or the compressed airlines and other
Health Officer. [Link] is a type of gate valve that is pipelines with excessive pressure.
a. Wastewater holding tank used where the stems must be a. Globe valve
b. Sump pit installed pointing downward. b. Safety valve
c. Cistern a. Wedged shape c. Butterfly valve
d. Central sewage manhole b. Double disc valve d. OS & Y valve
c. Plug type disc valve
60. No________shall be connected d. Conventional disc valve 71. In hot water supply system,
to a private or public sewage e. Composition disc valve where the large pipe of the
disposal system unless permission installation is installed at the top of
has first been obtained from 66. Type of gate valve that closes in the riser, and the diminishing pipe
Administrative Authority the same manner of wedged type, sizes passes through the lower
a. Commercial food waste grinder except that its parallel faces drop in floors.
b. Aircon Wastewater a vertical position and are forced a. Overhead feed system
c. Factory Wastewater apart by the disc spreader. This type b. Up-feed system
d. Industrial Wastewater of valve isused in cold liquid and c. Air pressure system
sewage disposal installation. d. Pump circuit system
61. No permit shall be issued for the a. Wedged shape
installation,alteration or repair of b. Double disc valve 72. In hot water supply system,
any private sewage disposal system c. Plug type disc valve where the large pipe is installed at
or part thereof for any lot which can d. Conventional disc valve the bottom of the riser and the
connect with an existing public e. Composition disc valve diminishing sizes passes through the
sewer fronting the lot. upper floors of the building.
a. True 67. It is a globe valve type that has a a. Overhead feed system
b. False wide bearing surface producing b. Up-feed system
c. May be good resistance to the cutting effects c. Air pressure system
d. Need for approval to AA of scale,dirt and other kind of d. Pump circuit system
foreign matter found inside the pipe.
62. It shall have at least the same a. Wedged shape 73. It is a system where it is
cross-sectional area as its equivalent b. Double disc valve recommended for large building
round pipe, except that the ratio of c. Plug type disc valve where difficulty of providing natural
its side dimensions shall not exceed d. Conventional disc valve circulation of hot water is
3 to 1. e. Composition disc valve encountered A used of mechanical
a. Rectangular pipe device (centrifugal pump)used to
b. Square pipe 68. It is a globe valve type that has a circulate hot water to the plumbing
c. Full circle pressure tight bearing between disc fixtures.
d. Semi-circle and these at recommended for cold a. Overhead feed system
water and any temperature services. b. Up-feed system
63. Vertical piping maybe round, a. Wedged shape c. Air pressure system
square or rectangular. b. Double disc valve d. Pump circuit system
a. True c. Plug type disc valve
b. False d. Conventional disc valve 74. Type of water heating system
c. Maybe e. Composition disc valve where water is confined within a
d. Depends approval of AA system at low temperature.
69. It is globe valve type valve that a. Hot water space heating system
64. It refers to the pump that will isused for various types of service b. Hot water supply system
discharge waste in the sump and on oil, gasoline, steam and hot or c. Hot water bathing system
transfer it to the house drain cold water. d. Hot water sauna system
installed overhead. It is necessary a. Wedged shape
when the public sewer line was b. Double disc valve
installed at a depth from 2 to 4 c. Plug type disc valve
meters below the street level. d. Conventional disc valve
75. It is a type of water heating a. Fire Code 88. When was the National
system where water is not in a b. Plumbing Code Plumbing Code of the Philippines
closed system which operates on c. Sanitation Code promulgated and approved by
much higher temperature. d. Water Code Malacañang?
a. Hot water space heating system a. June 18, 1955
b .Hot water supply system 82. RNPC1999 was approved by b. December 21, 1999
c. Hot water bathing system Pres. Joseph Estrada last_________. c. January 28 , 1959
d. Hot water sauna system a. June 27, 1956 d. February 14, 1959
b. April 19, 1958
76. It is the cheapest, the smallest, c. December 21, 1999 89. Known as “Plumbing Law of the
and the smallest form of water d. July 25, 1999 Philippines” was signed by
closet designed without water tank. President Ramon Magsaysay in June
a. Squat type 83. Commercial standard length of a 18,1955.
b. Pail flush type Cast iron hub type. a. R.A 1374
c. Wash down type a.1.5 m b. R.A 1378
d. Direct flush type b.3.0 m c. R.A 1060
c.4.0 m d. R.A 9514
77. It considers the building density d.5.0 m
in the locality and the flammability 90. When was the NAMPAP
of the structures and its contents. 84. Who is the Chairman of Board organized and had it registered with
a. Fire Code of Master Plumbers(BOMP) where the Securities and Exchange
b. Building Cod the NAMPAP submitted the draft Commission.
c. NFPA code to him in October 1999. a. 1934
d. Plumbing Code a. Engr. John Jones b. 1932
b. Engr. Fortunato H. Amosco c. 1935
78. Is a pipe installed in buildings c. Engr. Raymundo Gumapac d. 1937
not as part of the water supply or d. Engr. Catalino Casapunan
disposal system, but primarily for 91. Who was the NAMPAP
use as water conveyance in case of 85. City Ordinance No.2411 known President spearheaded the updating
fire. as the? of the RNPCP in 1996?
a. Standpipe a. National Drinking Water Standard a. Jamie M. Cabase
b. Wet pipe b. Clean Air Act b. Hemogenes Pobre
c. Dry pipe c. Plumbing Code for the City of c. Fortunato H. Amosco
d. Fire hose Manila d. Teodoro pastor.
d. Clean Water Act
79. The spacing of sprinkler heads 92. The first chief of the Division of
depends upon the following 86. Plumbing Engineering was first the Plumbing Construction and
conditions, except: introduced to what School or Inspection.
a. Fire rating of the building University? a. John M. David
b. Types of occupancy a. Feati University b. John F. Hass
c. Total area b. University of the Philippines c. John A. Meracolo
d. Fire exit availability c. De LaSalle University d. John F. Hidalgo
d. University of Manila
80. Who is the Chairman of PRC 93. Based on the history of
where adopted RNPCP1999 which 87. When was the Board of plumbing practice, who was the
Pres. Joseph Estrada approved last Examiners for Master Plumber and Governor General issued letter of
Dec.21,1999. NAMPAP prepared the Curriculum instruction on proper waste disposal
a. Hermogenes Pobre for Plumbing Engineering and when epidemics like cholera,
b. Teodoro Pastor approved by Dep ED at Feati leprosy and other contagious disease
c. Roberto Feliciano University? engulfed in the Philippines.
d. Raymondo Reyes a. 1966-1988 a. General Fortunato
b. 1966-1969 b. General Mc. Arthur
81. An adequate_______is one of c. 1955-1999 c. General Malvar
the most important governances in d. 1945-1965 d. General Harrison
modern and healthful human
existence.
94. Before Martial Law, Republic 100. Any pipe or fitting installed in
Act No. 6541 known as the? a vertical positioned or which forms
a. Building Code of the Philippines at an angle of not more than 45
b. Fire Code of the Philippines degrees with the vertical line.
c. Sanitation Code of the Philippines a. Horizontal pipe
d. Plumbing Code of the Philippines b. Stack
c. Vertical pipe
95. Based on the history of d. Branch
plumbing practice, plumbing took a
great leap at the turn of the
American soldiers, engineers,
Thomasite teachers, doctors and
evangelist?
a. 16thcentury
b. 20thcentury
c. 19thcentury
d. 18thcentury

96. The Filipino plumbers were

assigned the task of maintaining,
repairing/remodeling plumbing
system in all pueblos or town,
church and government buildings
during?
a. 16th-17thcentury
b. 18th-19thcentury
c. 19th-20thcentury
d. 15th-16thcentury

97. When was the first approved

which inclusion of “asbestos cement
pipe” s an approved material.
a. November 28, 1967
b. September 21, 1988
c. October 23, 1986
d. November 21, 1985

98. Based on the history of

plumbing practice“ The walled city”
known as Intramuros was
established as a model community
by the?
a. Americans
b. Spaniards
c. Mexican
d. Japanese

99. The birth of the plumbing

profession in the Philippines was
traced back to.
a. 12thcentury
b. 15thcentury
c. 16thcentury
d. 17thcentury