Scribd
Upload
21 views81 pages

One-Way Slab 05.28.25

The document provides detailed design information for reinforced concrete slabs, including material properties, loads, dimensions, and reinforcement specifications. It outlines calculations for positive and negative moments, steel ratios, and spacing of main and temporary bars, ensuring safety under specified conditions. Various design scenarios are presented, indicating compliance with the NSCP reference code.

Uploaded by

Jose Antonio Buendia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
21 views81 pages

One-Way Slab 05.28.25

The document provides detailed design information for reinforced concrete slabs, including material properties, loads, dimensions, and reinforcement specifications. It outlines calculations for positive and negative moments, steel ratios, and spacing of main and temporary bars, ensuring safety under specified conditions. Various design scenarios are presented, indicating compliance with the NSCP reference code.

Uploaded by

Jose Antonio Buendia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

REINFORCED CONCR

Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
1.545332887253
Two Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu

Negative moment
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
87.3336249994227
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
1.54 kPa
4.8 kPa

500 mm
350 mm
2.989 m
4.619 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
cantilever
3.54 kPa
5.08 kPa
6 kPa

DESIGN
1.54533288725326
Two Way

L/# 10
460 mm
150 mm

67.19201612729 kN
38.5285788 kN
4.269 m
115 mm

End Span
14
Discontinuous End Integral with Support

20.4321121611429 kn.m

Exterior Face of First Interior Support


Exterior Face of First Interior Support
10
More than 2 Spans

28.6049570256 kn.m

Bottom Reinforcement
positive 1.7166235800162
negative 2.40327301202268

0.00655148417588209

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.00655148417588209
0.85
753.42068022644 300
10

Spacing
104.855098981696
100 450
450
261.799387799149
260 900
450
OUTPUT
10 pcs. / m
100 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
10 pcs / m
10
10
20 mm
28.6049570256 kN - m

465 mm
785.398163397448 mm2
34.6970617203195 mm
40.8200726121405 mm
6234.87270223574 MPa
Mu
> 28.6049570256
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 6.10 kn/m


Wul 9.6 kn/m
wu 15.70 kn/m
β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
REINFORCED CONCR
Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
2.76693877551
One Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
167.898099474919
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
4.18 kPa
2.4 kPa

500 mm
350 mm
2.45 m
6.779 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
both end
3.54 kPa
7.72 kPa
2.4 kPa

DESIGN
2.7669387755102
One Way

L/# 28
240 mm
150 mm

67.19201612729 kN
48.4412292 kN
6.429 m
115 mm

Interior Spans
14
Discontinuous End Integral with Support

38.686790376 kn.m
Interior Face of Exterior Support
10
More than 2 Spans

54.1615065264 kn.m

Bottom Reinforcement
positive 3.25030795009452
negative 4.55043113013233

0.0131040265811262

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.0131040265811262
0.85
1506.96305682951 300
20

Spacing
52.4233156492952
50 450
450
261.799387799149
260 900
450
OUTPUT
20 pcs. / m
50 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
20 pcs / m
10
10
20 mm
54.1615065264 kN - m

465 mm
1570.7963267949 mm2
69.3941234406389 mm
81.6401452242811 mm
2817.43635111787 MPa
Mu
> 54.1615065264
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 9.26 kn/m


Wul 3.84 kn/m
wu 13.10 kn/m

β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
REINFORCED CONCR
Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
2.88898359258
One Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
175.582243643653
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
1.54 kPa
4.8 kPa

500 mm
350 mm
2.3465 m
6.779 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
one end
3.54 kPa
5.08 kPa
4.8 kPa

DESIGN
2.8889835925847
One Way

L/# 24
280 mm
150 mm

67.19201612729 kN
50.9253948 kN
6.429 m
115 mm

End Span
14
Discontinuous End Integral with Support

40.670728344 kn.m
Exterior Face of First Interior Support
10
More than 2 Spans

56.9390196816 kn.m

Bottom Reinforcement
positive 3.41699040907372
negative 4.78378657270322

0.0138670513216988

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.0138670513216988
0.85
1594.71090199537 300
21

Spacing
49.538759596584
50 450
450
261.799387799149
260 900
450
OUTPUT
21 pcs. / m
50 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
21 pcs / m
10
10
20 mm
56.9390196816 kN - m

465 mm
1649.33614313464 mm2
72.8638296126708 mm
85.7221524854951 mm
2654.70128677892 MPa
Mu
> 56.9390196816
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 6.10 kn/m


Wul 7.68 kn/m
wu 13.78 kn/m

β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
REINFORCED CONCR
Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
2.602487333026
One Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
70.4084320414522
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
1.54 kPa
0.6 kPa

500 mm
350 mm
5.65 m
2.171 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
both end
3.54 kPa
5.08 kPa
0.6 kPa

DESIGN
2.60248733302626
One Way

L/# 28
80 mm
150 mm

67.19201612729 kN
21.50316 kN
5.3 m
115 mm

Interior Spans
14
Discontinuous End Integral with Support

14.15736 kn.m
Interior Face of Exterior Support
10
More than 2 Spans

19.820304 kn.m

Bottom Reinforcement
positive 1.18944423440454
negative 1.66522192816635

0.00446361366168115

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.00507246376811594
0.85
583.333333333333 300
8

Spacing
135.428571428571
140 450
450
261.799387799149
260 900
450
OUTPUT
8 pcs. / m
140 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
8 pcs / m
10
10
20 mm
19.820304 kN - m

465 mm
628.318530717959 mm2
27.7576493762556 mm
32.6560580897124 mm
7943.59087779467 MPa
Mu
> 19.820304
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 6.10 kn/m


Wul 0.96 kn/m
wu 7.06 kn/m

β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
REINFORCED CONCR
Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
2.724204435872
One Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
70.4084320414522
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
1.54 kPa
0.6 kPa

500 mm
350 mm
5.65 m
2.074 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
one end
3.54 kPa
5.08 kPa
0.6 kPa

DESIGN
2.72420443587271
One Way

L/# 24
90 mm
150 mm

67.19201612729 kN
21.50316 kN
5.3 m
115 mm

End Span
14
Discontinuous End Integral with Support

14.15736 kn.m
Exterior Face of First Interior Support
10
More than 2 Spans

19.820304 kn.m

Bottom Reinforcement
positive 1.18944423440454
negative 1.66522192816635

0.00446361366168115

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.00507246376811594
0.85
583.333333333333 300
8

Spacing
135.428571428571
140 450
450
261.799387799149
260 900
450
OUTPUT
8 pcs. / m
140 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
8 pcs / m
10
10
20 mm
19.820304 kN - m

465 mm
628.318530717959 mm2
27.7576493762556 mm
32.6560580897124 mm
7943.59087779467 MPa
Mu
> 19.820304
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 6.10 kn/m


Wul 0.96 kn/m
wu 7.06 kn/m

β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
REINFORCED CONCR
Reference Code: NSCP

DATA
Material Properties and De

Unit Weight
Super Imposed Dead Load
Super Imposed Live Load

Beam Height
Beam Width
Slab - X Span
Slab - Z Span

Concrete Cover
Main Bar
Temp Bar

fc
fy
Support Condition
Weight of Slab
Dead Load
Live Load

DESIG
1.792
Two Way
Minimum Thickness :

say

ΦVc
Vu max
length
effect d

Positive moment

Mu
Negative moment

Mu

Bottom Reinforce
Rn

Steel ratio

Ab
Pmax
Pmin
Pmin
use p
β1
As
No. of Bars

Spacing

Main Bar

Temp Bar
OUTP
Main Bars
Minimum Main Bar Spacing
Minimum Temp Bar Spacing

ANALY
Yield Strength of Steel, fy
Compressive Strength of Concrete, f'c
Height of Beam, h
Width of Beam, b
Number of Bars
Ø Ties
Ø Rebar
CC
Required Mu

d
As
a
c
fs
Mu
70.4084320414522
Safe!
ED CONCRETE SLAB DESIGN
Reference Code: NSCP 2015- 2nd Printing

DATA
Material Properties and Design Information

23.6 KN/m3
1.54 kPa
0.6 kPa

400 mm
250 mm
3.125 m
5.6 m

30 mm
10 mm
10 mm

21 Mpa
276 MPa
one end
3.54 kPa
5.08 kPa
0.6 kPa

DESIGN
1.792
Two Way

L/# 24
230 mm
150 mm

67.19201612729 kN
21.70602 kN
5.35 m
115 mm

End Span
14
Discontinuous End Integral with Support

14.42574 kn.m
Exterior Face of First Interior Support
10
More than 2 Spans

20.196036 kn.m

Bottom Reinforcement
positive 1.21199243856333
negative 1.69678941398866

0.00455143055184413

79
0.0235597826086956
0.0041508837816629 0.00507246376811594
0.00507246376811594
0.00507246376811594
0.85
583.333333333333 300
8

Spacing
135.428571428571
140 450
450
261.799387799149
260 900
450
OUTPUT
8 pcs. / m
140 mm @ O.C spacing
260 mm @ O.C spacing

ANALYSIS
276 Mpa
21 MPa
500 mm
350 mm
8 pcs / m
10
10
20 mm
20.196036 kN - m

465 mm
628.318530717959 mm2
27.7576493762556 mm
32.6560580897124 mm
7943.59087779467 MPa
Mu
> 20.196036
Safe!
NOTES

simply supported 20
one end 24
both end 28
cantilever 10
Fy > 420 = (0.4+fy/700)

L/S > 2 = one way

L/S < 2 = two way

Wud 6.10 kn/m


Wul 0.96 kn/m
wu 7.06 kn/m

β1
17 <= f'c <= 280.85
28 < f'c < 55 1.05 0.85
f'c >= 55 0.65
NOTES
Moment Location Condition Mu simply supported
Discontinuous End Integral
End Span 14 one end
with SupportEnd
Discontinuous
Positive End Span Unrestrained
11 both end
Interior Spans All 16 cantilever
Interior Face of
Supporting Spandrel Beam 24 Fy > 420 = (0.4+fy/700)
Exterior Support
Interior Face of
Exterior Supporting Column 16 L/S > 2 = one way
Exterior Face of
Support
First Interior Two Spans 9 ` L/S < 2 = two way
Negative Support
Other Supports More than 2 Spans 10
Face of all Supports
All 11 solving for Vu
Satisfying (a) or (b)
a 12
b 12 exterior face
face of all other supports
min cc
fy
<420 0.002 ΦVc
>=420 0.00273913043478261 0.002
0.0027
>=420 0.0014 vu<ΦVc
NOTES
L/20
L/24
L/28
L/10
420 = (0.4+fy/700)

1.15Wuln/2

Wuln.2

20

0.75
0.75(.17λ√f'cbd)
adequate
10 one way
12 two way
16 posi end 0
20 0
25 0
32
40
50

You might also like