DVR®2000E+ Patented PMG Powered Digital Voltage Regulator…

is an encapsulated design for reliable operation in all environments. Fully tested to withstand 20g’s in all planes and vibration to 0.050 inch peak.

The DVR®2000E+ has the following features: •G

 enerator paralleling with reactive droop and reactive differential
• Three regulation modes: Single or three compensation
phase Automatic Voltage Regulation (AVR) or •F
 ront-panel 4-digit human-machine interface (HMI) for
Field Current Regulation (FCR) modes configuration and monitoring
• Adjustable soft start in AVR mode • Windows® based software for configuration and monitoring
• Under frequency (volts/hertz) regulation • MODBUS protocol via RS232
• Single or three phase generator current • Controller Area Network (CAN) interface for metering and control
(RMS) sensing (with optional CTs) • Regulator conveniently mounted in a low voltage control section 1425 – 4500 kW (60 Hz)
• True three-phase power metering within the conduit box to facilitate external adjustments.
1500 – 4500 kVA (50 Hz)
Heavy-Duty Shielded Ball Bearings… Low And Medium Voltage System… 480 – 13,800 Volts (60 Hz)
are designed for a minimum B-10 life of also incorporates form wound coils and VPI insulation systems. 380 – 11,000 Volts (50 Hz)
40,000 hours. The bearings are protected
on each side by cast-iron bearing caps to Rugged Construction…
prevent contamination from entering the assures low vibration and long life. Internal frame supports, external
bearing. Extended grease and relief fittings girth rings, and rigid mounting feet are welded to the rolled steel Typical 2MW Model
make bearing regreasing easy. As a result plate to form a strong, unitized frame.
of the superior single piece lamination
construction, the MAGNAPOWER® has very Brushless Exciter… Dimensions in inches and (millimeters)
low self induced shaft currents and for this
reason does not require insulated bearings.
is mounted outboard of the bearing for ease
of inspection and maintenance. The rotating
MAGNAPOWER®
ALL DIMENSIONS ARE APPROXIMATE: Contact factory for full dimensional data
MAGNAPOWER® generators are available in single or two bearing rectifier assembly utilizes 1000 volt rectifiers
construction (1020 frame). and a surge suppressor for protection from
induced voltage spikes. Frame Size BA C D E 2E 2F H O P
Rotor Construction… 1020 25.03 (636) 107.89 (2740) 12.78 (325) 28.75 (730) 57.50 (1460) 31.00 (787) 12.25 (311) 60.47 (1536) 50.00 (1270)
a Marathon Electric exclusive, features single
1030 25.03 (636) 113.36 (2879) 12.78 (325) 28.75 (730) 57.50 (1460) 38.00 (965) 12.25 (311) 60.47 (1536) 50.00 (1270)
piece rotor laminations and an ammortiseur Permanent Magnet
winding. The copper field winding is layer Generator (PMG) Excitation 1040 23.51 (597) 127.07 (3228) 12.78 (325) 28.75 (730) 57.50 (1460) 45.00 (1143) 12.25 (311) 63.29 (1608) 63.54 (1614)

wound with thermo setting epoxy for high System…

Note: Connection boxes shown are furnished as standard product. Consult factory for optional connection boxes.
mechanical and electrical integrity and has provides 300%–60 Hz (250%–50 Hz) short
an overcoat of tropical insulation for added circuit excitation support for a minimum of
environmental protection. 10 seconds and isolates the regulator power
Marathon: The experts in your field Marathon’s commitment to long term customer support
circuit from load disturbances. The PMG is
As an independent manufacturer with more than fifty and an intensive product development program means you
High Voltage Insulation System mounted outboard of the bearing for ease
(11.0 kV – 13.8 kV Models)… of inspection and maintenance. years of experience as a leading supplier to th e get more:

utilizes advanced materials resulting in ge n e rato r marke t, Marathon is dedicated to designing n Design & Application Experience
superior performance. The turn insulation Conduit Box… and manufacturing the highest quality electrical products. n Advanced Testing Facilities
is a calcined muscovite mica with an epoxy assembly is optimized for customer flexibility. Various access panels n Technical Support Staff
resin providing excellent voltage surge and a low voltage control section are provided. The external load n Broad Product Line
protection. The ground wall tape is an leads can enter the conduit box from the top, bottom, or side.
uncalcined muscovite mica tape with low Furthermore, the conduit box is designed to accept various auxiliary
binder content. This results in good devices (potential and current transformers, etc.) while maintaining
voltage endurance and greater tape porosity a compact generator outline. All models are equipped with an end-
enabling complete resin impregnation during mounted conduit box as standard.
ISO 9001:2008 Certified
the VPI process. The slot section of the coil
is wrapped with a low resistance conducting tape to provide corona Conduit Box Options…
protection. The coil end turns utilize a semiconductive gradient tape optional conduit box designs are available to meet customer
and a protective tape system ensuring optimal voltage de-stressing requirements.
and superior environmental protection. The entire stator assembly 100 East Randolph Street
incorporates form wound coils and is vacuum pressure impregnated Wausau, WI 54402-8003
PH: 715-675-3359
(VPI) with anhydride epoxy resin, well known for its excellent FAX: 715-675-8026
electrical and mechanical properties. Finally, an overcoat of tropical
insulation is applied for added environmental protection. www.marathonelectric.com

©2014 Regal Beloit Corporation BROCHURE SB551G 7529J-NP/06-14/???/ROTO Printed in the USA
 60 Hertz 480Y Volts
kVA 50 Hertz 380Y Volts
kW Three Phase,
1800 RPM
0.8 Power Factor Three Phase,
1500 RPM
0.8 Power Factor
The MAGNAPOWER generator from Marathon offers
Ratings Ratings
®

powerful performance, reliable power generation, and 6 Leads 40°C Ambient 6 Leads 40°C Ambient
easy installation. MAGNAPOWER provides application
®
® ®

flexibility to meet the unique requirements of remote Low Voltage Low Voltage
Standard Features: kVA Continuous Duty kVA Standby Duty
prime power applications. MAGNAPOWER is the ideal kW Continuous Duty kW Standby Duty
• All designs utilize form wound coils
®

Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Single and two bearing configurations generator choice for prime power needs including: 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• SAE adaptations and drive discs for single bearing 1020FDL1100 1750 2000 2250 2250 2250 1020FDL1100 1938 2225 2225 2225 2225
• Ball bearings (40,000 hour B-10 life) 1020FDL1102 2000 2300 2300 2300 2300
n Reciprocating and Turbine Prime Movers 1020FDL1102 2000 2250 2500 2500 2500
• Digital voltage regulation (0.25%) 1020FDL1104 2225 2550 2550 2550 2550
1020FDL1104 2160 2510 2620 2680 2730
• Permanent magnet generator n Distributed Power Generation
1020FDL1106 2250 2710 2800 2800 2800 1020FDL1106 2250 2813 2850 2850 2850
• Two thirds pitch design
n Utility Applications 1020FDL1108 2340 2800 2900 3000 3000 1020FDL1108 2450 2900 2925 2925 2925
• Stator RTDs (2 per phase) on medium & high voltage
• VPI insulation system n Heavy Industry Power 1030FDL1110 2530 3080 3260 3350 3350 1030FDL1110 2625 3125 3263 3336 3338
• 6 leads with 4 busbars
n Oil and Gas Industry

Optional Features: n Cogeneration

kW 60 Hertz 4160Y Volts
1800 RPM kVA 50 Hertz 3300Y Volts
1500 RPM
• Space heater Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
•
•
IP23 dripcover
Customer specified pitch
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
• Voltage regulator options
® ®
• NEC Class 1, Group D, Division 2
• Bearing RTDs
Medium Voltage Medium Voltage
• Custom conduit boxes and mounting feet kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Air filters
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• Stator RTDs (2 per phase) on low voltage
1020FDM1180 2000 2250 2500 2500 2500 1020FDM1180 2156 2563 2750 2813 2813
1020FDM1182 2250 2500 2800 2800 2800 1020FDM1182 2250 2625 2813 2875 2875
Generator Design Specifications:
• High grade Class F insulation system for 6600–13,800 V 1020FDM1184 2400 2800 3000 3000 3000 1020FDM1184 2500 2800 3000 3000 3000
• High grade Class H insulation system for 480–4160 V With Panel Open With Door Open 1030FDM1186 2650 3000 3000 3000 3000 1030FDM1186 2650 3000 3000 3000 3000
• Vibration limits to NEMA MG-1 1030FDM1188 2650 3000 3300 3350 3350 1030FDM1188 2650 3000 3300 3350 3350
• 300% short circuit current for 10 seconds 1030FDM1190 2813 3250 3438 3500 3500
1030FDM1190 2800 3250 3420 3500 3500
• Harmonic content less than 5% 1030FDM1192 2938 3375 3650 3750 3750
1030FDM1192 2920 3340 3650 3680 3680
• Deviation factor less than 5%
1040FDM1194 3300 3800 4150 4200 4200 1040FDM1194 3300 3800 4150 4250 4250
• TIF less than 50

Agency Certifications:
• UL recognized (up to 600 Volts)
kW 60 Hertz 13,800Y Volts
1800 RPM kVA 50 Hertz 11,000Y Volts
1500 RPM
• CSA certified Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
Available Generator Ratings:
• Voltage: 480–13,800 (60 Hz) ® ®

380–11,000 (50 Hz) High Voltage High Voltage

• Poles: 4 kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
1020FDH1237 1000 1100 N/A 1250 N/A 1020FDH1237 1000 1100 N/A 1250 N/A
1020FDH1239 1150 1350 N/A 1500 N/A 1020FDH1239 1150 1350 N/A 1500 N/A
1020FDH1240 1425 1700 N/A 1850 N/A 1020FDH1240 1500 1750 N/A 1875 N/A
1020FDH1242 1530 1840 N/A 2000 N/A 1020FDH1242 1775 2063 N/A 2188 N/A
1020FDH1244 1750 2000 N/A 2180 N/A 1020FDH1244 1838 2175 N/A 2363 N/A
1020FDH1246 1750 2090 N/A 2270 N/A 1020FDH1246 1900 2250 N/A 2425 N/A
1020FDH1248 1780 2130 N/A 2330 N/A 1020FDH1248 1975 2375 N/A 2588 N/A
1030FDH1250 1970 2350 N/A 2570 N/A 1030FDH1250 2150 2500 N/A 2813 N/A
Low Voltage with 1030FDH1252 2100 2500 N/A 2700 N/A 1030FDH1252 2188 2550 N/A 2875 N/A
Rear Cover Removed 1030FDH1254 2440 2800 N/A 3250 N/A 1030FDH1254 2500 2913 N/A 3200 N/A
1040FDH1256 2500 3000 N/A 3250 N/A 1040FDH1256 2500 3125 N/A 3500 N/A
High Voltage with 1040FDH1258 2800 3300 N/A 3660 N/A 1040FDH1258 2888 3425 N/A 3750 N/A
Rear Cover Removed 1040FDH1260 2800 3300 N/A 3660 N/A 1040FDH1260 2950 3650 N/A 4025 N/A
 60 Hertz 480Y Volts
kVA 50 Hertz 380Y Volts
kW Three Phase,
1800 RPM
0.8 Power Factor Three Phase,
1500 RPM
0.8 Power Factor
The MAGNAPOWER generator from Marathon offers
Ratings Ratings
®

powerful performance, reliable power generation, and 6 Leads 40°C Ambient 6 Leads 40°C Ambient
easy installation. MAGNAPOWER provides application
®
® ®

flexibility to meet the unique requirements of remote Low Voltage Low Voltage
Standard Features: kVA Continuous Duty kVA Standby Duty
prime power applications. MAGNAPOWER is the ideal kW Continuous Duty kW Standby Duty
• All designs utilize form wound coils
®

Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Single and two bearing configurations generator choice for prime power needs including: 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• SAE adaptations and drive discs for single bearing 1020FDL1100 1750 2000 2250 2250 2250 1020FDL1100 1938 2225 2225 2225 2225
• Ball bearings (40,000 hour B-10 life) 1020FDL1102 2000 2300 2300 2300 2300
n Reciprocating and Turbine Prime Movers 1020FDL1102 2000 2250 2500 2500 2500
• Digital voltage regulation (0.25%) 1020FDL1104 2225 2550 2550 2550 2550
1020FDL1104 2160 2510 2620 2680 2730
• Permanent magnet generator n Distributed Power Generation
1020FDL1106 2250 2710 2800 2800 2800 1020FDL1106 2250 2813 2850 2850 2850
• Two thirds pitch design
n Utility Applications 1020FDL1108 2340 2800 2900 3000 3000 1020FDL1108 2450 2900 2925 2925 2925
• Stator RTDs (2 per phase) on medium & high voltage
• VPI insulation system n Heavy Industry Power 1030FDL1110 2530 3080 3260 3350 3350 1030FDL1110 2625 3125 3263 3336 3338
• 6 leads with 4 busbars
n Oil and Gas Industry

Optional Features: n Cogeneration

kW 60 Hertz 4160Y Volts
1800 RPM kVA 50 Hertz 3300Y Volts
1500 RPM
• Space heater Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
•
•
IP23 dripcover
Customer specified pitch
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
• Voltage regulator options
® ®
• NEC Class 1, Group D, Division 2
• Bearing RTDs
Medium Voltage Medium Voltage
• Custom conduit boxes and mounting feet kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Air filters
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• Stator RTDs (2 per phase) on low voltage
1020FDM1180 2000 2250 2500 2500 2500 1020FDM1180 2156 2563 2750 2813 2813
1020FDM1182 2250 2500 2800 2800 2800 1020FDM1182 2250 2625 2813 2875 2875
Generator Design Specifications:
• High grade Class F insulation system for 6600–13,800 V 1020FDM1184 2400 2800 3000 3000 3000 1020FDM1184 2500 2800 3000 3000 3000
• High grade Class H insulation system for 480–4160 V With Panel Open With Door Open 1030FDM1186 2650 3000 3000 3000 3000 1030FDM1186 2650 3000 3000 3000 3000
• Vibration limits to NEMA MG-1 1030FDM1188 2650 3000 3300 3350 3350 1030FDM1188 2650 3000 3300 3350 3350
• 300%–60 Hz (250%–50 Hz) short circuit current for 10 seconds 1030FDM1190 2813 3250 3438 3500 3500
1030FDM1190 2800 3250 3420 3500 3500
• Harmonic content less than 5% 1030FDM1192 2938 3375 3650 3750 3750
1030FDM1192 2920 3340 3650 3680 3680
• Deviation factor less than 5%
1040FDM1194 3300 3800 4150 4200 4200 1040FDM1194 3300 3800 4150 4250 4250
• TIF less than 50

Agency Certifications:
• UL recognized (up to 600 Volts)
kW 60 Hertz 13,800Y Volts
1800 RPM kVA 50 Hertz 11,000Y Volts
1500 RPM
• CSA certified Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
Available Generator Ratings:
• Voltage: 480–13,800 (60 Hz) ® ®

380–11,000 (50 Hz) High Voltage High Voltage

• Poles: 4 kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
1020FDH1237 1000 1100 N/A 1250 N/A 1020FDH1237 1000 1100 N/A 1250 N/A
1020FDH1239 1150 1350 N/A 1500 N/A 1020FDH1239 1150 1350 N/A 1500 N/A
1020FDH1240 1425 1700 N/A 1850 N/A 1020FDH1240 1500 1750 N/A 1875 N/A
1020FDH1242 1530 1840 N/A 2000 N/A 1020FDH1242 1775 2063 N/A 2188 N/A
1020FDH1244 1750 2000 N/A 2180 N/A 1020FDH1244 1838 2175 N/A 2363 N/A
1020FDH1246 1750 2090 N/A 2270 N/A 1020FDH1246 1900 2250 N/A 2425 N/A
1020FDH1248 1780 2130 N/A 2330 N/A 1020FDH1248 1975 2375 N/A 2588 N/A
1030FDH1250 1970 2350 N/A 2570 N/A 1030FDH1250 2150 2500 N/A 2813 N/A
Low Voltage with 1030FDH1252 2100 2500 N/A 2700 N/A 1030FDH1252 2188 2550 N/A 2875 N/A
Rear Cover Removed 1030FDH1254 2440 2800 N/A 3250 N/A 1030FDH1254 2500 2913 N/A 3200 N/A
1040FDH1256 2500 3000 N/A 3250 N/A 1040FDH1256 2500 3125 N/A 3500 N/A
High Voltage with 1040FDH1258 2800 3300 N/A 3660 N/A 1040FDH1258 2888 3425 N/A 3750 N/A
Rear Cover Removed 1040FDH1260 2800 3300 N/A 3660 N/A 1040FDH1260 2950 3650 N/A 4025 N/A
 60 Hertz 480Y Volts
kVA 50 Hertz 380Y Volts
kW Three Phase,
1800 RPM
0.8 Power Factor Three Phase,
1500 RPM
0.8 Power Factor
The MAGNAPOWER generator from Marathon offers
Ratings Ratings
®

powerful performance, reliable power generation, and 6 Leads 40°C Ambient 6 Leads 40°C Ambient
easy installation. MAGNAPOWER provides application
®
® ®

flexibility to meet the unique requirements of remote Low Voltage Low Voltage
Standard Features: kVA Continuous Duty kVA Standby Duty
prime power applications. MAGNAPOWER is the ideal kW Continuous Duty kW Standby Duty
• All designs utilize form wound coils
®

Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Single and two bearing configurations generator choice for prime power needs including: 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• SAE adaptations and drive discs for single bearing 1020FDL1100 1750 2000 2250 2250 2250 1020FDL1100 1938 2225 2225 2225 2225
• Ball bearings (40,000 hour B-10 life) 1020FDL1102 2000 2300 2300 2300 2300
n Reciprocating and Turbine Prime Movers 1020FDL1102 2000 2250 2500 2500 2500
• Digital voltage regulation (0.25%) 1020FDL1104 2225 2550 2550 2550 2550
1020FDL1104 2160 2510 2620 2680 2730
• Permanent magnet generator n Distributed Power Generation
1020FDL1106 2250 2710 2800 2800 2800 1020FDL1106 2250 2813 2850 2850 2850
• Two thirds pitch design
n Utility Applications 1020FDL1108 2340 2800 2900 3000 3000 1020FDL1108 2450 2900 2925 2925 2925
• Stator RTDs (2 per phase) on medium & high voltage
• VPI insulation system n Heavy Industry Power 1030FDL1110 2530 3080 3260 3350 3350 1030FDL1110 2625 3125 3263 3336 3338
• 6 leads with 4 busbars
n Oil and Gas Industry

Optional Features: n Cogeneration

kW 60 Hertz 4160Y Volts
1800 RPM kVA 50 Hertz 3300Y Volts
1500 RPM
• Space heater Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
•
•
IP23 dripcover
Customer specified pitch
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
• Voltage regulator options
® ®
• NEC Class 1, Group D, Division 2
• Bearing RTDs
Medium Voltage Medium Voltage
• Custom conduit boxes and mounting feet kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
• Air filters
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
• Stator RTDs (2 per phase) on low voltage
1020FDM1180 2000 2250 2500 2500 2500 1020FDM1180 2156 2563 2750 2813 2813
1020FDM1182 2250 2500 2800 2800 2800 1020FDM1182 2250 2625 2813 2875 2875
Generator Design Specifications:
• High grade Class F insulation system for 6600–13,800 V 1020FDM1184 2400 2800 3000 3000 3000 1020FDM1184 2500 2800 3000 3000 3000
• High grade Class H insulation system for 480–4160 V With Panel Open With Door Open 1030FDM1186 2650 3000 3000 3000 3000 1030FDM1186 2650 3000 3000 3000 3000
• Vibration limits to NEMA MG-1 1030FDM1188 2650 3000 3300 3350 3350 1030FDM1188 2650 3000 3300 3350 3350
• 300%–60 Hz (250%–50 Hz) short circuit current for 10 seconds 1030FDM1190 2813 3250 3438 3500 3500
1030FDM1190 2800 3250 3420 3500 3500
• Harmonic content less than 5% 1030FDM1192 2938 3375 3650 3750 3750
1030FDM1192 2920 3340 3650 3680 3680
• Deviation factor less than 5%
1040FDM1194 3300 3800 4150 4200 4200 1040FDM1194 3300 3800 4150 4250 4250
• TIF less than 50

Agency Certifications:
• UL recognized (up to 600 Volts)
kW 60 Hertz 13,800Y Volts
1800 RPM kVA 50 Hertz 11,000Y Volts
1500 RPM
• CSA certified Three Phase, 0.8 Power Factor Three Phase, 0.8 Power Factor
Ratings 6 Leads 40°C Ambient Ratings 6 Leads 40°C Ambient
Available Generator Ratings:
• Voltage: 480–13,800 (60 Hz) ® ®

380–11,000 (50 Hz) High Voltage High Voltage

• Poles: 4 kW Continuous Duty kW Standby Duty kVA Continuous Duty kVA Standby Duty
Model Number NEMA B NEMA F NEMA H NEMA F NEMA H Model Number NEMA B NEMA F NEMA H NEMA F NEMA H
80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R 80°C R/R 105°C R/R 125°C R/R 130°C R/R 150°C R/R
1020FDH1237 1000 1100 N/A 1250 N/A 1020FDH1237 1000 1100 N/A 1250 N/A
1020FDH1239 1150 1350 N/A 1500 N/A 1020FDH1239 1150 1350 N/A 1500 N/A
1020FDH1240 1425 1700 N/A 1850 N/A 1020FDH1240 1500 1750 N/A 1875 N/A
1020FDH1242 1530 1840 N/A 2000 N/A 1020FDH1242 1775 2063 N/A 2188 N/A
1020FDH1244 1750 2000 N/A 2180 N/A 1020FDH1244 1838 2175 N/A 2363 N/A
1020FDH1246 1750 2090 N/A 2270 N/A 1020FDH1246 1900 2250 N/A 2425 N/A
1020FDH1248 1780 2130 N/A 2330 N/A 1020FDH1248 1975 2375 N/A 2588 N/A
1030FDH1250 1970 2350 N/A 2570 N/A 1030FDH1250 2150 2500 N/A 2813 N/A
Low Voltage with 1030FDH1252 2100 2500 N/A 2700 N/A 1030FDH1252 2188 2550 N/A 2875 N/A
Rear Cover Removed 1030FDH1254 2440 2800 N/A 3250 N/A 1030FDH1254 2500 2913 N/A 3200 N/A
1040FDH1256 2500 3000 N/A 3250 N/A 1040FDH1256 2500 3125 N/A 3500 N/A
High Voltage with 1040FDH1258 2800 3300 N/A 3660 N/A 1040FDH1258 2888 3425 N/A 3750 N/A
Rear Cover Removed 1040FDH1260 2800 3300 N/A 3660 N/A 1040FDH1260 2950 3650 N/A 4025 N/A
DVR®2000E+ Patented PMG Powered Digital Voltage Regulator…
is an encapsulated design for reliable operation in all environments. Fully tested to withstand 20g’s in all planes and vibration to 0.050 inch peak.

The DVR®2000E+ has the following features: • Generator paralleling with reactive droop and reactive differential
• Three regulation modes: Single or three compensation
phase Automatic Voltage Regulation (AVR) or • Front-panel 4-digit human-machine interface (HMI) for
Field Current Regulation (FCR) modes configuration and monitoring
• Adjustable soft start in AVR mode • Windows® based software for configuration and monitoring
• Under frequency (volts/hertz) regulation • MODBUS protocol via RS232
• Single or three phase generator current • Controller Area Network (CAN) interface for metering and control
(RMS) sensing (with optional CTs) • Regulator conveniently mounted in a low voltage control section 1425 – 4500 kW (60 Hz)
• True three-phase power metering within the conduit box to facilitate external adjustments.
1500 – 4500 kVA (50 Hz)
Heavy-Duty Shielded Ball Bearings… Low And Medium Voltage System… 480 – 13,800 Volts (60 Hz)
are designed for a minimum B-10 life of also incorporates form wound coils and VPI insulation systems. 380 – 11,000 Volts (50 Hz)
40,000 hours. The bearings are protected
on each side by cast-iron bearing caps to Rugged Construction…
prevent contamination from entering the assures low vibration and long life. Internal frame supports, external
bearing. Extended grease and relief fittings girth rings, and rigid mounting feet are welded to the rolled steel Typical 2MW Model
make bearing regreasing easy. As a result plate to form a strong, unitized frame.
of the superior single piece lamination
construction, the MAGNAPOWER® has very Brushless Exciter… Dimensions in inches and (millimeters)
low self induced shaft currents and for this
reason does not require insulated bearings.
is mounted outboard of the bearing for ease
of inspection and maintenance. The rotating
MAGNAPOWER®
ALL DIMENSIONS ARE APPROXIMATE: Contact factory for full dimensional data
MAGNAPOWER® generators are available in single or two bearing rectifier assembly utilizes 1000 volt rectifiers
construction (1020 frame). and a surge suppressor for protection from
induced voltage spikes. Frame Size BA C D E 2E 2F H O P
Rotor Construction… 1020 25.03 (636) 107.89 (2740) 12.78 (325) 28.75 (730) 57.50 (1460) 31.00 (787) 12.25 (311) 60.47 (1536) 50.00 (1270)
a Marathon Electric exclusive, features single
1030 25.03 (636) 113.36 (2879) 12.78 (325) 28.75 (730) 57.50 (1460) 38.00 (965) 12.25 (311) 60.47 (1536) 50.00 (1270)
piece rotor laminations and an ammortiseur Permanent Magnet
winding. The copper field winding is layer Generator (PMG) Excitation 1040 23.51 (597) 127.07 (3228) 12.78 (325) 28.75 (730) 57.50 (1460) 45.00 (1143) 12.25 (311) 63.29 (1608) 63.54 (1614)

wound with thermo setting epoxy for high System… Note: Connection boxes shown are furnished as standard product. Consult factory for optional connection boxes.
mechanical and electrical integrity and has provides 300% short
an overcoat of tropical insulation for added circuit excitation support for a minimum of
environmental protection. 10 seconds and isolates the regulator power Marathon: The experts in your field Marathon’s commitment to long term customer support
circuit from load disturbances. The PMG is As an independent manufacturer with more than fifty and an intensive product development program means you
High Voltage Insulation System mounted outboard of the bearing for ease
(11.0 kV – 13.8 kV Models)… of inspection and maintenance.
years of experience as a leading supplier to th e get more:

utilizes advanced materials resulting in ge n e rato r marke t, Marathon is dedicated to designing n Design & Application Experience
superior performance. The turn insulation Conduit Box… and manufacturing the highest quality electrical products. n Advanced Testing Facilities
is a calcined muscovite mica with an epoxy assembly is optimized for customer flexibility. Various access panels n Technical Support Staff
resin providing excellent voltage surge and a low voltage control section are provided. The external load n Broad Product Line
protection. The ground wall tape is an leads can enter the conduit box from the top, bottom, or side.
uncalcined muscovite mica tape with low Furthermore, the conduit box is designed to accept various auxiliary
binder content. This results in good devices (potential and current transformers, etc.) while maintaining
voltage endurance and greater tape porosity a compact generator outline. All models are equipped with an end-
enabling complete resin impregnation during mounted conduit box as standard.
ISO 9001:2008 Certified
the VPI process. The slot section of the coil
is wrapped with a low resistance conducting tape to provide corona Conduit Box Options…
protection. The coil end turns utilize a semiconductive gradient tape optional conduit box designs are available to meet customer
and a protective tape system ensuring optimal voltage de-stressing requirements.
and superior environmental protection. The entire stator assembly 100 East Randolph Street
incorporates form wound coils and is vacuum pressure impregnated Wausau, WI 54402-8003
PH: 715-675-3359
(VPI) with anhydride epoxy resin, well known for its excellent FAX: 715-675-8026
electrical and mechanical properties. Finally, an overcoat of tropical
insulation is applied for added environmental protection. www.marathonelectric.com

©2014 Regal Beloit Corporation BROCHURE SB551G 7529J-NP/06-14/???/ROTO Printed in the USA
DVR®2000E+ Patented PMG Powered Digital Voltage Regulator…
is an encapsulated design for reliable operation in all environments. Fully tested to withstand 20g’s in all planes and vibration to 0.050 inch peak.

The DVR®2000E+ has the following features: •G

 enerator paralleling with reactive droop and reactive differential
• Three regulation modes: Single or three compensation
phase Automatic Voltage Regulation (AVR) or •F
 ront-panel 4-digit human-machine interface (HMI) for
Field Current Regulation (FCR) modes configuration and monitoring
• Adjustable soft start in AVR mode • Windows® based software for configuration and monitoring
• Under frequency (volts/hertz) regulation • MODBUS protocol via RS232
• Single or three phase generator current • Controller Area Network (CAN) interface for metering and control
(RMS) sensing (with optional CTs) • Regulator conveniently mounted in a low voltage control section 1425 – 4500 kW (60 Hz)
• True three-phase power metering within the conduit box to facilitate external adjustments.
1500 – 4500 kVA (50 Hz)
Heavy-Duty Shielded Ball Bearings… Low And Medium Voltage System… 480 – 13,800 Volts (60 Hz)
are designed for a minimum B-10 life of also incorporates form wound coils and VPI insulation systems. 380 – 11,000 Volts (50 Hz)
40,000 hours. The bearings are protected
on each side by cast-iron bearing caps to Rugged Construction…
prevent contamination from entering the assures low vibration and long life. Internal frame supports, external
bearing. Extended grease and relief fittings girth rings, and rigid mounting feet are welded to the rolled steel Typical 2MW Model
make bearing regreasing easy. As a result plate to form a strong, unitized frame.
of the superior single piece lamination
construction, the MAGNAPOWER® has very Brushless Exciter… Dimensions in inches and (millimeters)
low self induced shaft currents and for this
reason does not require insulated bearings.
is mounted outboard of the bearing for ease
of inspection and maintenance. The rotating
MAGNAPOWER®
ALL DIMENSIONS ARE APPROXIMATE: Contact factory for full dimensional data
MAGNAPOWER® generators are available in single or two bearing rectifier assembly utilizes 1000 volt rectifiers
construction (1020 frame). and a surge suppressor for protection from
induced voltage spikes. Frame Size BA C D E 2E 2F H O P
Rotor Construction… 1020 25.03 (636) 107.89 (2740) 12.78 (325) 28.75 (730) 57.50 (1460) 31.00 (787) 12.25 (311) 60.47 (1536) 50.00 (1270)
a Marathon Electric exclusive, features single
1030 25.03 (636) 113.36 (2879) 12.78 (325) 28.75 (730) 57.50 (1460) 38.00 (965) 12.25 (311) 60.47 (1536) 50.00 (1270)
piece rotor laminations and an ammortiseur Permanent Magnet
winding. The copper field winding is layer Generator (PMG) Excitation 1040 23.51 (597) 127.07 (3228) 12.78 (325) 28.75 (730) 57.50 (1460) 45.00 (1143) 12.25 (311) 63.29 (1608) 63.54 (1614)

wound with thermo setting epoxy for high System…

Note: Connection boxes shown are furnished as standard product. Consult factory for optional connection boxes.
mechanical and electrical integrity and has provides 300%–60 Hz (250%–50 Hz) short
an overcoat of tropical insulation for added circuit excitation support for a minimum of
environmental protection. 10 seconds and isolates the regulator power
Marathon: The experts in your field Marathon’s commitment to long term customer support
circuit from load disturbances. The PMG is
As an independent manufacturer with more than fifty and an intensive product development program means you
High Voltage Insulation System mounted outboard of the bearing for ease
(11.0 kV – 13.8 kV Models)… of inspection and maintenance. years of experience as a leading supplier to th e get more:

utilizes advanced materials resulting in ge n e rato r marke t, Marathon is dedicated to designing n Design & Application Experience
superior performance. The turn insulation Conduit Box… and manufacturing the highest quality electrical products. n Advanced Testing Facilities
is a calcined muscovite mica with an epoxy assembly is optimized for customer flexibility. Various access panels n Technical Support Staff
resin providing excellent voltage surge and a low voltage control section are provided. The external load n Broad Product Line
protection. The ground wall tape is an leads can enter the conduit box from the top, bottom, or side.
uncalcined muscovite mica tape with low Furthermore, the conduit box is designed to accept various auxiliary
binder content. This results in good devices (potential and current transformers, etc.) while maintaining
voltage endurance and greater tape porosity a compact generator outline. All models are equipped with an end-
enabling complete resin impregnation during mounted conduit box as standard.
ISO 9001:2008 Certified
the VPI process. The slot section of the coil
is wrapped with a low resistance conducting tape to provide corona Conduit Box Options…
protection. The coil end turns utilize a semiconductive gradient tape optional conduit box designs are available to meet customer
and a protective tape system ensuring optimal voltage de-stressing requirements.
and superior environmental protection. The entire stator assembly 100 East Randolph Street
incorporates form wound coils and is vacuum pressure impregnated Wausau, WI 54402-8003
PH: 715-675-3359
(VPI) with anhydride epoxy resin, well known for its excellent FAX: 715-675-8026
electrical and mechanical properties. Finally, an overcoat of tropical
insulation is applied for added environmental protection. www.marathonelectric.com

©2014 Regal Beloit Corporation BROCHURE SB551G 7529J-NP/06-14/???/ROTO Printed in the USA Rev. 1