AquaSensor

AS 3000

Description Technical specifications

The AquaSensor AS 3000 is the
Input data
further development of the proven
AS 1000 series for the online Level of saturation 0 to 100 %
detection of water in oils, particularly Temperature -25 to 100 °C / -13 to 212 °F
as a sensor for condition monitoring. Operating pressure -0.5 to 50 bar / -7.25 to 725 psi
Pressure resistance ≤ 630 bar / 9136 psi
It records the water saturation and the
Flow velocity max. 5 m/s
temperature of the operating fluid.
Parts in contact with fluid Mechanical connection: stainless steel /
The display allows you to view the vacuum-metallised ceramic
current measured values or to adjust Seal: FKM or EPDM per type
the parameter settings. Output data
The measured values are output as Analogue output
a 4 ... 20 mA or 0 ... 10 V signal and Output signal (parameterisable) 4 to 20 mA ohmic resistance ≤ 500 Ω or
are the basis for two parameterisable 0 to 10 V ohmic resistance ≥ 1 kΩ
switching outputs. corresponds to the measurement range
The AS 3000 thus enables hydraulic factory setting selected in each case:
and lubricating oils to be monitored 4 to 20 mA
accurately, continuously and online. Calibration accuracy ≤ ± 2 % FS max.
Accuracy in media measurements ≤ ± 3 % FS typ.
Pressure dependence ± 0.2 % FS / bar
Applications Switching outputs
zzMobile hydraulics Version (parameterisable) PNP transistor outputs
zzHydraulic and lubrication systems in Normally open or normally closed
industry Factory setting: normally closed
Allocation (parameterisable) Degree of saturation or temperature
Factory setting: degree of saturation
Advantages (alarm 80% (SP 1), warning 60% (SP 2),
zz4 digit digital display, can be aligned activation temperature: 30 °C / 86 °F)
in two axes Switch current maximum 1.2 A per output
zzUser-friendly due to key Switch cycles > 100 million
programming Ambient conditions
zzIndividual configuration Nominal temperature range (saturation) 0 to +80 °C / 32 to 176 °F
Storage temperature range -40 to +80 °C / -40 to 176 °F
zzReliable on account of its compact,
Fluid temperature range -40 to +80 °C / -40 to 176 °F
rugged design
Viscosity range 1 to 5000 mm2/s
zzEconomical sensor Fluid compatibility mineral oil based fluids,
zzNo calibration required for different synthetic and natural esters per type
oil types -mark EN 61000-6-1 / 2 / 3 / 4
zzPressure-resistant, even with Protection class to DIN 40050 IP 67
pulsations Other data
zzEarly detection of water problems Supply voltage 18 to 32 V DC
thus preventing faults and Residual ripple of supply voltage ≤ 5%
unnecessary interruption to Electrical connection M 12x1, 5 pole
operations Display 4-digit, LED, 7-segment, red,
height of digits 7 mm
Mechanical connection G3/8 A acc. to DIN 3852
Torque value 25 Nm
EN 7.636.3/06.19

Weight ~ 110 g
Note: reverse polarity protection, short circuit protection provided.
FS (Full Scale) = relative to the full measuring range

59
 Items supplied
Order details –– AquaSensor
AS 3 0 0 8 – 5 – 000 –– Operating manual
Type
AS = AquaSensor Pin connections
M12x1, 5 pole
Measuring range
3 = 3000 Series
Medium 4 3
0 = Mineral oils 5
1 = Phosphate ester (HFD-R)
1 2
Mechanical connection
0 = G 3/8 A DIN 3852
Electrical connection
8 = Male connector M12x1, 5 pin
(female connector not supplied) Pin Assignment
Signal technology 1 Voltage supply 18-35 VDC
5 = 2 switch outputs / 1 analogue output 2 Analogue output
Modification number 3 GND supply voltage
000 = standard
4 SP 1 (alarm)
5 SP 2 (warning)
Dimensions
Accessories
Ø 42
25.2 40.4 ZBE 08
M 12 x1 11 Female connector, bent, shielded,
5 pin, M12x1
Part no. 6006786

ZBE 08S-02
Female connector, right-angled,
16.1

with 2 m cable, shielded, 5 pin, M12x1

76.2
92.7

Part no. 6019455

65.3

ZBE 08S-05
Female connector, right-angled,
2.5

with 5 m cable, shielded, 5 pin, M12x1

27 Part no. 6019456
12

30

135° ZBE 47S-05

Female connector, straight,
Ø 12 16.1
G3/8A
with 5 m lead, shielded, 5 pin, M12x1
Ø 21.9 -0,2 Part no. 3484562
Ø 29.5 -0,05
Ø 53.5
135° PS5
Power supply unit with socket plug
(female), 5 pole, M12x1
Part. no. 3399939

170°
M12x1, 5pol 170°
All dimensions in mm

HYDAC FILTER SYSTEMS GMBH

NOTE Industriegebiet
EN 7.636.3/06.19

The information in this brochure relates to the operating conditions and applications D-66280 Sulzbach / Saar
described. Tel.:+49 (0) 6897/509-01
For applications and operating conditions not described, please contact the proper Fax:+49 (0) 6897/509-9046
HYDAC department. Internet: www.hydac.com
Subject to technical modifications. E-Mail: [email protected]

60