Industrial Lens Edging

Product Guide
Innovative edging setup in your lab
With a wide variety of industrial edging systems, NIDEK offers higher productivity and enhanced lens processing quality. By flexibly
combining dry and wet edging with our robotic handling unit, you will achieve greater efficiency and productivity in your lab.
 01
System Edger 3
SE-9090 Supra
SE-9090 Supra L

02
Auto Edging System 4
AES-1000S/AES-1000CB
AES-1500S/AES-1500CB
AES-2200

03
System Dry Edger 5
Xtrimer SE-1

04
Auto Dry edging System 6
ADS-1000S/ADS-1000CB
Contents ADS-2200

05
Satellite Tracer 7
LT-1200
LT-980
Remote tracing

06
Server software/system 8
iRx Server
iRx Satellite
iRx system
07

Function comparison 9
08

Specifications 10
 System Edger

SE-9090 series
Reliable wet industrial edger
The SE-9090 series is a wet industrial edger which has been highly regarded
in many labs throughout the world. Durable and accurate grinding results
in high volume production with an aesthetically pleasing finish.

Faster grinding with dual spindle system High quality automatic polish safety beveling Quick size adjustment
The unique dual spindle system incorporates a program which To produce a brilliant finish for every job, the SE-9090 series offers The touch-sensor calibration function
automatically controls grinding pressure at seven different levels automatic safety beveling and polish safety beveling as standard. (optional) largely reduces the time for size
to realize a high speed processing. adjustment through revolutionary technology.
High base curve processing technology (type PLB-8 and PLB-8S only)
Simultaneous dual-surface lens measurement On high base curve lenses, front and rear beveling are performed
The SE-9090 series simultaneously measures both front and rear separately. The height of the bevel can be controlled to achieve a
surfaces of the lens for speedy operation. “micro bevel” and highly customized profile.

Step beveling (type PLB-8S only)

User-friendly 10.4-inch SVGA color LCD touch panel
Step beveling makes prescription lens mounting on sunglass frames
10.4-inch color LCD touch panel provides all the information needed
easy, which is traditionally difficult due to uneven eyewire profiles. Layout screen Adjustment screen
for any procedures. The bevel simulation screen gives you the ability
Maximum lens size: ø90 mm
to precisely place the bevel for a guaranteed quality finish.
Advanced networking capability
Exclusive “3D-fit” The SE-9090 series is compatible with various communication protocols such
Exceptionally stable size accuracy and optimal fit can be as VCA (OMA) and NIDEK LAN, offering advanced networking capabilities.
achieved by NIDEK’s exclusive “3D-fit” technology. By utilizing
the LT-1200/LT-980, the frame circumference can be measured in Auto grooving*
3-D which results in a precise lens finish. Fully-automatic grooving and safety beveling are available. Parameter setting screen Step beveling screen
SE-9090 Supra (PLB-8S) only

Wheel configuration Processable lens material Minimum grinding size

SE-9090 Supra SE-9090 Supra L
SE-9090 Supra SE-9090 Supra L SE-9090 Supra SE-9090 Supra L Minimum Flat edging ø32.0 x 19.0 mm
PLA PLB PLB-8S PLA PLB PLB-8 GLS PLA PLB PLB-8S PLA PLB PLB-8 GLS grinding size Bevel edging ø33.6 x 20.6 mm
Plastic bevel CR-39 with Pliable Safety beveling (flat) ø34.0 x 21.0 mm ø34.0 x 21.0 mm
Plastic bevel polish High index plastic cup (standard) (PLB-8S: ø36.0 x 23.0 mm) (PLB-8: ø36.0 x 23.0 mm)
Plastic flat Polycarbonate WxH Safety beveling (bevel) ø35.6 x 22.6 mm ø35.6 x 22.6 mm
Plastic flat polish Acrylic resin (PLB-8S: ø37.6 x 24.6 mm) (PLB-8: ø37.6 x 24.6 mm)
Glass bevel Trivex High base curve beveling PLB-8S: ø37.9 x 24.4 mm PLB-8: ø37.9 x 24.4 mm
Glass flat Polyurethane High base curve step beveling PLB-8S : ø37.9 x 24.4 mm
Plastic high base curve bevel Glass Grooving* ø32.0 x 19.0 mm ø32.0 x 19.0 mm
Step bevel : Available (PLB-8S: ø32.0 x 20.0 mm)
*Grooving is available for the SE-9090 Supra L only when connected to the AHM-1000 Supra.

03
AES series Auto Edging System
Efficient high volume lens processing in minimal space

Single unit system AES-1000S/AES-1000CB

Simple, compact automation system for small lab/shop

• AES-1000S: SE-9090 Supra / Supra L + RHU-1000S (stacker type)

• AES-1000CB: SE-9090 Supra / Supra L + RHU-1000CB (conveyor belt type)
• AES-1000CB Stacker set: AES-1000CB + Stacker/Destacker

AES-1000S AES-1000CB AES-1000CB Stacker set

854 (W) x 1,185 (D) x 1,683 (H) mm 1,343 (W) x 1,131 (D) x 1,683 (H) mm 1,408 (W) x 2,590 (D) x 1,683 (H) mm

Combination unit system AES-1500S/AES-1500CB

Highly-efficient drilling/grooving unit combination system

• AES-1500S: SE-9090 Supra / Supra L + AHM-1000 Supra* + RHU-1500S (stacker type)

• AES-1500CB: SE-9090 Supra / Supra L + AHM-1000 Supra* + RHU-1500CB (conveyor belt type)
• AES-1500CB Stacker set: AES-1500CB + Stacker/Destacker
*AHM-1000 Supra: Automatic 3-D drilling/grooving unit

AES-1500S AES-1500CB AES-1500CB Stacker set

1,354 (W) x 1,185 (D) x 1,683 (H) mm 1,500 (W) x 1,329 (D) x 1,683 (H) mm 3,002 (W) x 1,272 (D) x 1,683 (H) mm

Double units system AES-2200

Innovative in-line industrial edging system with a dual arm robot

• AES-2200: 2 units of SE-9090 Supra / Supra L + RHU-2200

• AES-2200 Stacker set: AES-2200 + Stacker/Destacker

AES-2200 AES-2200 Stacker set

2,036 (W) x 1,061 (D) x 1,714 (H) mm 3,486 (W) x 1,061 (D) x 1,714 (H) mm

04
 System Dry Edger

Xtrimer SE-1
Compact, high speed dry edger
The Xtrimer SE-1 is a compact dry edger equipped with smooth six spindles.
Specialized tools for each edge type achieve high speed processing.
Selectable tools depending on the lens material also contributes to consistent quality.

V tool layout system Easy operation in various situations

The Xtrimer SE-1 can respond to the growing complexities of today’s By combining NIDEK’s iRx Editor software* with
Astonishing speed frame shapes and lens materials by utilizing an angled “V tool layout tablet portability the Xtrimer SE-1 offers simple
The 5-axis engineering design, combined with a specialized design”. By using six unique spindles, the dry cutting process and operation and customization at your finger tips.
high-speed motor, maximizes processing efficiency. milling method will be more efficient. *iRx Editor is shape editing software used with the Xtrimer SE-1.

“3D-fit” Multiple-shape capability Intuitive screen design and clear graphics

NIDEK’s true “3D-fit” technology is complemented by an Incorporating six individual processing tools, the Xtrimer SE-1 Job data and processing conditions are displayed in
integrated mechanical cutting method, which vastly expedites the roughing process for all organic lens materials, including high-resolution graphics on the large color LCD
increases the first-time-fit ratio. Trivex and Polycarbonate. The unit completes the 3-D cutting cycle touch screen for easy job verification.
and is capable of making “tiltable bevel profiles” (inclined bevels) and
drilling holes in a multitude of difficult shapes, all while providing an
Small footprint uncompromised finish. Detailed condition setting input
The minimal body size offers many options for Processing conditions are customizable for each job
placement inside the lab. 3-D grooving and drilling function to achieve the highest quality finish.
Partial step beveling function
Maximum processing diameter Inclined beveling function
The Xtrimer SE-1 can process over ø85 mm lenses, which T-bevel function
exceeds the limit of conventional lens edgers. Side hole drilling function

Tool type Processable lens material Minimum grinding size

Polishing wheel tool CR-39 Minimum grinding size Flat edging ø32.0 x 19.0 mm
Step processing tool High index plastic with Pliable cup (standard) Bevel edging ø33.6 x 20.6 mm
Finishing tool Polycarbonate WxH Safety beveling (flat) ø34.0 x 21.0 mm
Roughing tool for PLA Acrylic resin Safety beveling (bevel) ø35.6 x 22.6 mm
Roughing tool for PC/TRX Trivex High base curve beveling ø33.6 x 20.6 mm
Drilling tool Polyurethane High base curve step beveling ø35.6 x 22.6 mm
Grooving tool Glass Grooving ø32.0 x 19.0 mm
: Available

05
ADS series Auto Dry edging System
Enhance the Xtrimer SE-1 performance to the maximum

Single unit system ADS-1000S/ADS-1000CB

High volume auto dry edging system in small footprint

• ADS-1000S: Xtrimer SE-1 + RHU-1000DS (stacker type)

• ADS-1000CB: Xtrimer SE-1 + RHU-1000DCB (conveyor belt type)
• ADS-1000CB Stacker set: ADS-1000CB + Stacker/Destacker

ADS-1000S ADS-1000CB ADS-1000CB Stacker set

983 (W) x 1,519 (D) x 1,750 (H) mm 1,392 (W) x 1,430 (D) x 1,750 (H) mm 1,392 (W) x 2,153 (D) x 1,750 (H) mm

Double units system ADS-2200

Dramatically-compact in-line auto dry edging system

• ADS-2200: 2 units of Xtrimer SE-1 + RHU-2200D

• ADS-2200 Stacker set: ADS-2200 + Stacker/Destacker

ADS-2200 ADS-2200 Stacker set

2,036 (W) x 1,308 (D) x 2,005 (H) mm 3,486 (W) x 1,308 (D) x 2,005 (H) mm

06
 Satellite Tracer
Automatic dual 3-D tracing with variable fulcrum stylus Remote tracing for lab operation
A variable fulcrum stylus keeps the axis angle perpendicular to Internet remote tracing by NIDEK satellite tracers and lens edgers is the best solution
the frame at any height. A unique 3-D mechanism digitizes without the need of a dedicated server. Our “3D-fit” technology provides high quality
binocular measurement of 1,000 points of reference per eye. lens-to-frame first-time-fit, which is crucial to accurate and precise remote tracing.

Job creatable Basic 3-D tracer

industrial tracer
LT-980 Optical Shop
LT-1200
Laboratory

Optical Shop
Precise measurement around all curves Concise measurement for
The LT-1200 incorporates an advanced accurate lens fit
tracing mechanism that operates with 3-D Tracing is the essential foundation for
precision on all frames regardless of their well-constructed eyeglasses. The LT-980 Internet
degree of curvature. delivers ultimate fit for eyewear.
Order/Frame data
Composite tracing Multifunction industrial and
web tracer Optical Shop
Composite tracing measures FPD/DBL and
frame wrap angle along with frame shape As an industrial tracer, the LT-980 can
to calculate all frame data automatically. be connected to any server PC and/or
lens edger to send full frame trace
LCD color touch screen data. In addition, it can be used as a
web tracer with the use of iRx Satellite. Laboratory
Large 10.4-inch color LCD screen allows easy
job data input.
Built-in accessory storage space Optical Shop
Multifunction industrial and web tracer The LT-980 has a convenient built-in
As an industrial tracer, processing conditions ergonomic storage compartment for
and layout data can be easily transmitted to storing accessories safely.
any server PC and/or lens edger. The LT-1200
can also be used as a web tracer without PC.

07
 Server software/system
NIDEK server software iRx system
Pattern/job management software iRx Server is a dedicated database software that iRx Server used in combination with NIDEK equipment creates a simple and complete
manages frame pattern data and job data used for edging lenses. It offers smooth package of Internet remote tracing system, using only conventional Internet access.
operation in a remote central edging lab.

Server software for lab Software for data communication iRx Server system
from retail locations
iRx Server Host server
AES/ADS series
iRx Satellite

AES/ADS series

Tracer Blocker Edger Edger AES/ADS series

Practical management of Internet remote tracing system
job and pattern with iRx Server

iRx Server iRx Satellite

AES/ADS series
Editable items Shape, Hole, Design cut, Shape, Hole, Design cut,
Partial grooving/beveling, Facet, Partial grooving/beveling, Facet,
LMATID (only for Xtrimer SE-1), Master file LMATID (only for Xtrimer SE-1)
Operation
iRx Satellite system Maximum 15 units
Job Searching, editing, copying, deleting Searching, editing, copying, deleting
Creating a pattern from a job Creating a pattern from a job
Displaying a communication log Maximum number of jobs: 30,000
Importing/exporting in text / VCA format
Maximum number of jobs: 100,000
Pattern Searching, editing, copying, deleting Searching, editing, copying, deleting
Creating a job from patterns Creating a job from patterns
Converting from DXF file format
Printing Job ticket, Job list, Pattern detail, Job ticket, Pattern detail
Pattern list
Backup Auto or manual Tracer Blocker Edger Edger
Adjustment of shape
Available
display size
Some function availability differs according to the usages.

08
 Function comparison
Wheel configuration Processable lens material
SE-9090 Supra SE-9090 Supra L Xtrimer SE-9090 Supra SE-9090 Supra L Xtrimer
PLA PLB PLB-8S PLA PLB PLB-8 GLS SE-1 PLA PLB PLB-8S PLA PLB PLB-8 GLS SE-1
Plastic bevel CR-39
Plastic bevel polish High index plastic
Plastic flat Polycarbonate
Plastic flat polish Acrylic resin
Glass bevel Trivex
Glass flat Polyurethane
Plastic high base curve bevel Glass
Step bevel : Available

Minimum grinding size

SE-9090 Supra SE-9090 Supra L Xtrimer SE-1
Minimum grinding Flat edging ø32.0 x 19.0 mm
size with Pliable cup Bevel edging ø33.6 x 20.6 mm
(standard) ø34.0 x 21.0 mm ø34.0 x 21.0 mm
Safety beveling (flat) ø34.0 x 21.0 mm
WxH (PLB-8S: ø36.0 x 23.0 mm) (PLB-8: ø36.0 x 23.0 mm)
ø35.6 x 22.6 mm ø35.6 x 22.6 mm
Safety beveling (bevel) ø35.6 x 22.6 mm
(PLB-8S: ø37.6 x 24.6 mm) (PLB-8: ø37.6 x 24.6 mm)
High base curve beveling PLB-8S: ø37.9 x 24.4 mm PLB-8: ø37.9 x 24.4 mm ø33.6 x 20.6 mm
High base curve step beveling PLB-8S: ø37.9 x 24.4 mm ø35.6 x 22.6 mm
ø32.0 x 19.0 mm
Grooving* ø32.0 x 19.0 mm ø32.0 x 19.0 mm
(PLB-8S: ø32.0 x 20.0 mm)
Minimum grinding Flat edging ø22.0 x 17.4 mm
size with mini cup Bevel edging ø23.6 x 19.0 mm
(optional) ø24.0 x 19.4 mm ø24.0 x 19.4 mm
Safety beveling (flat)
WxH (PLB-8S: ø26.0 x 21.4 mm) (PLB-8: ø26.0 x 21.4 mm)
ø25.6 x 21.0 mm ø25.6 x 21.0 mm
Safety beveling (bevel)
(PLB-8S: ø27.6 x 23.0 mm) (PLB-8: ø27.6 x 23.0 mm)
High base curve beveling PLB-8S: ø27.9 x 22.8 mm PLB-8: ø27.9 x 22.8 mm
High base curve step beveling PLB-8S: ø27.9 x 23.9 mm
ø22.0 x 18.0 mm
Grooving* ø22.0 x 19.0 mm
(PLB-8S: ø22.0 x 20.0 mm)
*Grooving is available for the SE-9090 Supra L only when connected to the AHM-1000 Supra.

09
 Specifications
SE-9090 Supra / Supra L Xtrimer SE-1
Model SE-9090 Supra SE-9090 Supra L Cutting system Patternless
Grinding system Double spindle system, Patternless Mode Beveling (automatic, guided, safety beveling,
Mode Beveling (automatic, guided, safety beveling, Beveling (automatic, guided, safety beveling, special safety beveling, polishing, high base curve,
special safety beveling, polishing*1) special safety beveling, polishing*2) partial beveling, step bevel, partial step, T-bevel, inclined)
Flat edging (polishing, safety beveling, grooving) Flat edging (polishing, safety beveling) Flat edging
High base curve beveling (type PLB-8S only) High base curve beveling (type PLB-8 only) (polishing, safety beveling, grooving, partial grooving)
Step bevel (type PLB-8S only) Soft processing Drilling (automatic, guided, side hole)
Soft processing Design cut
Setting range Soft processing
FPD 30.00 to 99.50 mm (0.01 mm increments) Setting range
PD 30.00 to 99.50 mm (0.01 mm increments) FPD 30.00 to 99.50 mm (0.01 mm increments)
1/2PD 15.0 to 49.75 mm (0.01 mm increments) PD 30.00 to 99.50 mm (0.01 mm increments)
Optical center height 0 to ±15.00 mm (0.01 mm increments) 1/2PD 15.0 to 49.75 mm (0.01 mm increments)
Size 0 to ±9.95 mm (0.01 mm increments) Optical center height 0 to ±15.0 mm (0.01 mm increments)
Water supply system Pump circulation or direct connection to tap water Size 0 to ±9.95 mm (0.01 mm increments)
Interface RS-232C - 3 ports Water supply system Water supply from the provided tank
1 port for connection with a PC or blocker (5 liters) (no circulation)
1 port for connection with a barcode scanner Interface RS-232C - 3 ports
1 port for connection with the robotic handling unit 1 port for connection with a PC or blocker
LAN - 1 port 1 port for connection with a barcode scanner
USB - 1 port (for connection with a USB flash drive only) 1 port for connection with the robotic handling unit
Power supply AC 200 to 230 V, 50/60 Hz LAN - 1 port
Power consumption 2.5 kVA USB - 1 port (for connection with a USB flash drive only)
Dimensions/Mass 600 (W) x 517 (D) x 611 (H) mm / 118 kg Power supply AC 200 to 240 V, 50/60 Hz
23.6 (W) x 20.4 (D) x 24.1 (H)" / 260 lbs. Power consumption 1.0 kVA
Standard accessories Coupler, Hose band, Duct, Duct adapter, Coupler, Hose band, Duct, Duct adapter, Dimensions/Mass 700 (W) x 750 (D) x 1,750 (H) mm / 420 kg
Power cord, Power cord, 27.6 (W) x 29.5 (D) x 68.9 (H)" / 926 lbs.
Hexagonal wrench (2 mm, 2.5 mm, 5 mm, 6 mm), Hexagonal wrench (2 mm, 2.5 mm, 5 mm, 6 mm), Standard accessories Hexagon socket head cap screw, Brush,
Dressing stick for finishing wheel, Compound kit, Dressing stick for finishing wheel, Key for front cover knob, Feedwater tank,
Splatter guard, Key for front cover, Dressing stick for roughing wheel for glass lenses Feedwater tank holder, Connection cable,
Wrench for wheel replacement, (type GLS only), Wrench (5.1 x 7 mm, 12 x 14 mm, 22 x 27 mm, 20 x 24 mm),
Wrench for grooving wheel replacement, Splatter guard, Key for front cover, Dummy cap, Tool protective cap, USB flash drive,
Ferrite core Adjustable wrench, Ferrite core iRx Editor software install-CD
Optional accessories Barcode scanner, Pump and tank, Pliable cup set, Optional accessories Startup kit, Drill bit (ø0.8, 1.0, 1.2), Barcode scanner kit,
Mini cup set, Pliable cup box, Mini cup box, USB flash drive, Touch sensor calibration jig, Pliable cup box,
USB flash drive, Touch sensor calibration jig Signal tower, Coolant, Clamping force adjustment kit,
*1 Available for the type PLB and PLB-8S External dust collector power ON/OFF kit,
*2 Available for the type PLB and PLB-8 Air consumption reduction kit

10
 Specifications
RHU series
Model RHU-1000S, RHU-1000CB RHU-1000DS, RHU-1000DCB RHU-1500S, RHU-1500CB RHU-2200 RHU-2200D
Combinable instruments SE-9090 Supra / Supra L Xtrimer SE-1 SE-9090 Supra / Supra L and AHM-1000 Supra Two SE-9090 Supra / Supra L Two Xtrimer SE-1
Applicable lenses
Maximum allowable diameter ø80 mm (blank lenses) ø98 mm (blank lenses)*1
Minimum allowable diameter ø20 mm (finished lenses) ø20 mm (finished lenses)*1
Maximum allowable thickness 17 mm (edge thickness of concave lenses) Maximum thickness at suction point: 10 mm
10 mm (thickness at the center of convex lenses) Maximum whole thickness in the suction axis direction: 17 mm (in
14 mm (overall thickness of convex lenses) normal transfer mode), 27 mm (in high base curve lens transfer mode)*1
Positive pressure
Used fluid Dry air
Connecting method One-touch joint of ø10 mm
Max. flow rate 70 liters/minute or more 140 liters/minute or more
Supply pressure 0.45 to 0.80 MPa (lowered to 0.40 to 0.45 MPa by the regulator)
Applicable barcodes
Method UPC-A, UPC-E, UPC-D3, EAN-13, EAN-8, CODE39, CODE128, UPC-A, UPC-E, UPC-D3, EAN-13, EAN-8, CODE39, CODE128, CODE39, Interleaved 2 of 5 (ITF), UPC/EAN/JAN, NW-7 (CODEBAR),
CODEBAR (NW7), Standard 2 of 5, Interleaved 2 of 5 (ITF), JAN, CODEBAR (NW7), Standard 2 of 5, Interleaved 2 of 5 (ITF) CODE128, CODE93, COOP 2 of 5 (NEC 2 of 5),
CODE 93 (RHU-1000CB) Standard 2 of 5 (Industrial 2 of 5)
Line width 0.2 mm or more 0.2 mm or more 0.2 mm or more
Power supply AC 200 / 230 V, 50/60 Hz
Power consumption 600 VA (single use) 600 VA (single use) / 3.0 kVA*2 300 VA (single use)
3.1 kVA (including the SE-9090 Supra / Supra L) 5.3 kVA (including two SE-9090 Supra / Supra L)
1.6 kVA (including the Xtrimer SE-1) 2.3 kVA (including two Xtrimer SE-1)
Dimensions/Mass 800 (W) x 1,185 (D) x 1,472 (H) mm / 220 kg (RHU-1000S) 1,300 (W) x 1,185 (D) x 1,472 (H) mm / 250 kg (RHU-1500S) 2,036 (W) x 1,052 (D) x 1,206 (H) mm / 195 kg (RHU-2200)
1,207 (W) x 1,128 (D) x 1,472 (H) mm / 185 kg (RHU-1000CB) 1,500 (W) x 1,242 (D) x 1,472 (H) mm / 260 kg (RHU-1500CB) 2,036 (W) x 706 (D) x 1,311 (H) mm / 170 kg (RHU-2200D)
960 (W) mm x 1,497 (D) mm x 1,466 (H) mm / 220 kg (RHU-1000DS) 51.2 (W) x 46.7 (D) x 58.0 (H)" / 550 lbs. (RHU-1500S) 80.2 (W) x 41.4 (D) x 47.5 (H)" / 430 lbs. (RHU-2200)
1,392 (W) mm x 1,397 (D) mm x 1,466 (H) mm / 185 kg (RHU-1000DCB) 59.1 (W) x 48.9 (D) x 58.0 (H)" / 573 lbs. (RHU-1500CB) 80.2 (W) x 27.8 (D) x 51.6 (H)" / 375 lbs. (RHU-2200D)
31.5 (W) x 46.7 (D) x 58.0 (H)" / 485 lbs. (RHU-1000S)
47.5 (W) x 44.4 (D) x 58.0 (H)" / 407 lbs. (RHU-1000CB)
37.8 (W) x 58.9 (D) x 57.7 (H)" / 485 lbs. (RHU-1000DS)
54.8 (W) x 55.0 (D) x 57.7 (H)" / 407 lbs. (RHU-1000DCB)
Standard accessories RS-232C cable, Drain hose (RHU-1000CB/S), RS-232C cable, Drain hose RHU-2200: Emergency stop button hole masking (for SE-9090 Supra),
Solenoid valve B (RHU-1000DCB/DS) EMG short cable (for SE-9090 Supra), Wrench, Thin wrench
RHU-2200D: SE-1 connecting parts, interlock key (spare)
Optional accessories Trays (RHU-1000S) Trays (RHU-1500S) USB flash drive (RHU-2200D)
*1 These are not processing limits of the SE-9090 Supra / Supra L and Xtrimer SE-1.
*2 Including the SE-9090 Supra / Supra L and AHM-1000 Supra

11
AHM-1000 Supra Stacker/Destacker
Drilling Model Stacker/Destacker
Hole diameter ø0.8 to 10.0 mm (0.1 mm increments) Operation Stacker mode, Destacker mode
Hole depth 6 mm or less Combinable instruments RHU-1000DCB*, RHU-1000CB, RHU-1500CB, RHU-2200D, RHU-2200
Range of hole milling ø33.0 to 70.0 mm from the lens rotation axis Positive pressure
Direction of hole milling Auto, Simple tilt, X Auto, Complex tilt Used fluid Dry air
Slotted hole width ø0.8 to 10.0 mm (0.1 mm increments) Max. flow rate 3 liters/minute or more
Slotted hole depth 6 mm or less Usual pressure 0.40 to 0.45 MPa
Slotted hole length 20 mm or less Connecting method One-touch joint of ø10 mm
Grooving Tray
Groove width 0.6 to 1.2 mm (0.1 mm increments) Number of stackable trays Up to 8 trays
Groove depth 0 to 0.8 mm (0.1 mm increments) Loading mass of clamp arms Up to 6 kg
Range Maximum radius: 42.0 mm (ø84.0 mm) Power supply AC 200 to 240 V, 50/60 Hz
Mode Auto, Guided Power consumption 120 VA
Power supply AC 200 to 240 V, 50/60 Hz Dimensions/Mass 720 (W) x 575 (D) x 1,563 (H) mm / 85 kg
Power consumption 300 VA 28.3 (W) x 22.6 (D) x 61.5 (H)" / 187 lbs.
Dimensions/Mass 440 (W) x 520 (D) x 611 (H) mm / 64 kg Standard accessories HU5OP-1 connecting parts (union tee, Y union tee, air tube, and air valve),
17.3 (W) x 20.5 (D) x 24.1 (H)" / 141 lbs. Power cord
Standard accessories Drill bit, Grooving cutter, Lens adapter and lens clamp for half-eye lenses, Optional accessories Sub-conveyor
Calibration jig, Calibration jig for grooving, Coupler, Hose band, Duct, *Stacker mode only
Duct adapter, Power cord, Hexagonal key wrench, Wrench, Fuse,
Communication cable, Calibration jig for drilling
Optional accessories Circulation pump and tank, Barcode scanner, Drill bit (ø1.0, 1.2, 1.6),
Grooving wheel, Lens adapter and lens clamp for mini cups

12
 Specifications
LT-1200/LT-980
Model LT-1200 LT-980
Tracing method Automatic 3-D binocular tracing
Measurement range
Frame Shape width : 36 to 85 mm
Shape height : 18.4 to 66 mm
Frame horizontal width: 113 to 180 mm
Pattern ø22 to 74 mm (15.5 to 66 mm vertically)
Measurement item Lens shape, FPD, 3-D circumference (2-D circumference during pattern and dummy lens tracing),
Frame tilt angle, Frame curve
Measuring points 1,000 points
Frame clamping One-touch automatic clamping
Setting of stylus Switchable between automatic and semiautomatic
Tracing time
Frame tracing 30 seconds or less (automatic binocular tracing using calibration jig)
Pattern tracing 20 seconds or less (tracing using calibration jig)
Interface RS-232C - 2 ports RS-232C - 2 ports
1 port for connection with a barcode scanner 1 port for connection with a barcode scanner
1 port for connection with a PC or lens edger 1 port for connection with a PC or lens edger
USB - 1 port (for connection with a PC) USB - 1 port (for connection with a PC)
LAN - 1 port
Power supply AC 100 to 120 V / 230 V, 50/60 Hz
Power consumption 70 VA
Dimensions/Mass 320 (W) x 320 (D) x 480 (H) mm / 14 kg 315 (W) x 300 (D) x 155 (H) mm / 7 kg
12.6 (W) x 12.6 (D) x 18.9 (H)" / 31 lbs. 12.4 (W) x 11.8 (D) x 6.1 (H)" / 15 lbs.
Standard accessories Accessory case, Spare fuse, Hexagonal wrench, Stylus cover, Standard pattern, Fuse, Hexagonal wrench, Stylus cover, Standard pattern,
Pattern setting unit, Standard frame, Frame support attachment, Stylus pen, Pattern setting unit, Standard frame, Frame support attachment,
USB driver CD for Windows, RS-232C cable, USB cable, Power cord USB driver CD for Windows, RS-232C cable, USB cable, Power cord, Dust cover
Optional accessories Barcode scanner, RS-232C cable, USB cable

13
Innovative edging
setup
in your lab
Specifications and design are subject to change without notice.
Trivex and CR-39 are registered trademarks of PPG Industries Ohio, Inc.
All other brand and product names are trademarks or registered trademarks of their respective companies.

HEAD OFFICE TOKYO OFFICE NIDEK INC. NIDEK S.A. NIDEK TECHNOLOGIES S.R.L. NIDEK (SHANGHAI) CO., LTD. NIDEK SINGAPORE PTE. LTD.
(International Div.) (International Div.) 47651 Westinghouse Drive, Europarc, Via dell’Artigianato, Rm3205,Shanghai Multi 51 Changi Business Park
34-14 Maehama, 3F Sumitomo Fudosan Hongo Fremont, CA 94539, U.S.A. 13 rue Auguste Perret, 6/A, 35020 Albignasego (Padova), Media Park, No.1027 Chang Central 2, #06-14, The
Hiroishi-cho, Gamagori, Bldg., 3-22-5 Hongo, Bunkyo-ku, TEL: +1-510-226-5700 94042 Créteil, FRANCE ITALY Ning Rd, Chang Ning District, Signature 486066,
Aichi 443-0038, JAPAN Tokyo 113-0033, JAPAN +1-800-223-9044 TEL: +33-1-49 80 97 97 TEL: +39 049 8629200 / 8626399 Shanghai, CHINA 200050 SINGAPORE
TEL: +81-533-67-8895 TEL: +81-3-5844-2641 (US only) URL: [Link] URL: [Link] TEL: +86 021-5212-7942 TEL: +65 6588 0389
URL: [Link] URL: [Link] URL: [Link] URL: [Link] URL: [Link]
[ Manufacturer ]

Industrial Lens Edging Product Guide_B01E001