CFM-20

SERVICE MANUAL AEP Model

Ver 1.0 2001.03
UK Model
E Model

Model Name Using Similar Machanism CFM-S1

Tape Transport Mechanism Type MF-M20-117

SPECIFICATIONS

RADIO CASSETTE-CORDER
9-873-105-21 Sony Corporation
2001C0200-1 Audio Entertainment Group
© 2001.3 General Engineering Dept.
CFM-20

TABLE OF CONTENTS

Specifications ........................................................................... 1 3. ADJUSTMENTS

3-1. Mechanical Adjustments ............................................. 7
1. GENERAL 3-2. Electrical Adjustments ................................................ 7
Location and Function of Controls .................................... 2
4. DIAGRAMS
2. DISASSEMBLY 4-1. Block Diagrams ......................................................... 11
2-1. Cabinet (Front) Sub ASSY, Cabinet (Rear) ASSY .... 3 4-2. Printed Wiring Boards .............................................. 12
2-2. MD ASSY ................................................................... 3 4-3. Schematic Diagrams -Main Section (1/2) - ............. 13
2-3. Record/Playback Head (HRP101), 4-4. Schematic Diagrams -Main Section (2/2) - ............. 14
Reel/Capstan Motor (M101),Belt ............................... 4
2-4. Jack Board (AEP, UK, IT, CET, HK, SP, AR model) 5. EXPLODED VIEWS
Main Board ................................................................. 4 5-1. Front Cabinet Section ............................................... 17
2-5. Batt (+) Board, Power Board 5-2. Rear Cabinet Section ................................................ 18
(AEP, UK, IT, CET, HK, SP, AR model) .................... 5 5-3. Mechanism Deck Section-1(MF-M20-117) ............. 19
2-6. Batt (+) Board, Power Board 5-4. Mechanism Deck Section-2(MF-M20-117) ............. 20
(C&SA, MX, TW model) ........................................... 5
6. ELECTRICAL PARTS LIST ........................................ 21

SAFETY-RELATED COMPONENT WARNING!! Notes on chip component replacement

COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH

• Never reuse a disconnected chip component.
MARK !ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST • Notice than the minus side of a tantalum capactior may be
ARE CRITICAL TO SAFE OPERATION. damaged by heat.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.

SECTION 1
GENERAL This section is extracted from
instruction manual.

Location and Function of Controls

2
 CFM-20
SECTION 2
DISASSEMBLY
• The equipment can be removed using the following procedure.
Cabinet (front) sub ASSY
Record/playback head (HRP101),
Set Reel/capstan motor (M101), Belt

Cabinet (rear) ASSY MD ASSY Jack board, Main board Batt(+) board, Power board

Note : Follow the disassembly procedure in the numerical order given.

• Abbreviation
SP : Singapore AR :Argentina
HK : Hong Kong MX :Mexican
IT : Italian TW :Taiwan
C&SA : Central and South America
CET : East European & Russian

2-1. CABINET (FRONT) SUB ASSY, CABINET (REAR) ASSY

2Screws (+ BVTP 3X14)

Lid, BATT

2Screws
(+ BVTP 3X14)

Cabinet (rear) ASSY

White
White/red
5CNP103

6Cabinet (front) sub ASSY

4Remove solder (two place)

2-2. MD ASSY

3CNP102

2CNP101

5MD ASSY
Cabinet (rear) ASSY

Bracket (VOL) 1Screw (+ BVTP 3X10)

3
 CFM-20

2-3. RECORD/PLAYBACK HEAD (HRP101), REEL/CAPSTAN MOTOR (M101), BELT

• Attaching belt

Flywheel ASSY

Belt

9Belt MD ASSY M101

5Lug (T), plate

4Record/playback
head (HRP101) 8Reel/capstan
motor (M101)

2Guide, tape 6Spring, Compr

3Screws
+ PTT 2X 5

1Screws Tapping+B 7Screws + P2.6X 5

(+PTT 2X5(s))

MD ASSY
2-4. JACK BOARD (AEP, UK, IT, CET, HK, SP, AR model), MAIN BOARD

knob (VOL)

knob (FUN)

Jack board

1
2
7Screw 8
(+ BVTP 3X10)

0 MCabinet (rear)

9 CNP901 6

5Screw
(+ BVTP 3X10)

Main board

3Screw Chasis
(+ BVTP 3X10)

4
 CFM-20

2-5. BATT (+) BOARD, POWER BOARD

(AEP, UK, IT, CET, HK, SP, AR model)

1Claw

Batt (+) board

Cabinet (rear)
4
Red

White

3Screws
(+ BVTP 3X10)

Power board

2-6. BATT (+) BOARD, POWER BOARD

(C&SA, MX, TW model)

Cabinet (rear)

Cord, power

1Claw
8
2

Batt (+) board

6

PWB, Cord retainer

3Screw
(+ BVTP 3X10)
Red Note on attaching power cord
On attaching power cord, first,
White
turn it around the projection on
"Cabi, rear" as shown in the
figure and secure it with "PWB,
5Screws 7Remove solder cord retainer".
(+ BVTP 3X10) Power board (two places)

5
CFM-20

• DIAL POINTER SETTING

Note : Follow the installation procedure in the numerical order given.

4 Set the right side edge

of Pointer to the center
Back plate of three scratched lines
on Back plate.

Set Pointer to "Cabinet Pointer

(front)" as shown in the
figure.

Pointer
Cabinet (front) 3Screws
(+BVTP 3X10)

1 2 Cabinet (rear) ASSY

6Turn knob (tuner) fully in the

direction of the arrow as shown
in the figure.
Cabinet (front)
ECM101

5Set the leads from microphone(ECM101)

as shown in the figure.

Cabinet (front)

6
 CFM-20
SECTION 3
ADJUSTMENTS
3-1. MECHANICAL ADJUSTMENTS 3-2. ELECTRICAL ADJUSTMENTS
PRECAUTION TAPE RECORDER SECTION 0dB=0.775V
1.Clean the following parts with a denatured-alcohol-moistened
swab : FUNOTION switch (S101) : TAPE (RADIO OFF)
record/playback head pinch roller VOLUME (RV101) : MIN
erase head rubber belts
capstan Standard Output Level
2.Demagnetize the record/playback head with a head demagnetizer. Output terminal Earphone Speaker
(Do not bring the head demagnetizer close to the erase head.) load impedance 8Ω 12Ω
3.Do not use a magnetized screwdriver for the adjustments. output signal level 0.25V (–10dB) 0.775V (0dB)
4.After the adjustments, apply suitable locking compound to the
parts adjusted. Test Tape
5. The adjustments should be performed with the rated power sup Type Signal Used for
ply voltage unless otherwise noted. WS-48A 3kHz, 0dB Tape Speed Adjustment
Record/Playback Head
P-4-A063 6.3kHz
Torque Measurement Azimuth Adjustment
Torque Torque Meter Meter Reading
1.77 to 5.88 mN•m
Forward CQ-102AS (18 to 60 g•cm) Record/Playback Head Azimuth Adjustment
(0.25 to 0.83 oz•inch)
Procedure :
Forward 0.01 to 0.49 mN•m 1.Playback Mode
CQ-102AS (1 to 5 g•cm)
Back Tension (0.014 to 0.069 oz•inch) test tape
P-4-A063J level meter
Speaker output:12Ω
4.42 to 9.31 mN•m (6.3kHz, -10dB)
Fast Forward CQ-201WS Earphone jack:8Ω
(45 to 95 g•cm)
(0.63 to 1.31 oz•inch) +
set
4.42 to 9.31 mN•m
Rewind CQ-201WS (45 to 95 g•cm)
(0.63 to 1.31 oz•inch)
AEP, UK, CET, IT, AR, HK, SP modelt J101 (Earphone jack)
C&SA, MX, TW model t KH102 (Speaker output)
Tape Tension Measurement
Torque Meter Meter Reading
2.Rotate the screw to adjust level meter reading to the maximum.
more than 60g
CQ-405AS Note : Adjust to the maximum peak though there may be two or
(more than 2.12 oz)
three peakes
3.After the adjustment, lock the adjustment screws with suitable
locking compound.

• Abbreviation
SP : Singapore AR :Argentina
HK : Hong Kong MX :Mexican
IT : Italian TW :Taiwan
C&SA : Central and South America
CET : East European & Russian

Adjustment Location :

Head azimuth adjustment screw

7
CFM-20

Tape Speed Adjustment

Procedure : level meter
Speaker output:12Ω
Mode : Playback Earphone jack:8Ω
test tape digital frequency
set +
WS-48B counter
Speaker output:12Ω
(3kHz, 0dB) Earphone jack:8Ω
AEP, UK, CET, IT, AR, HK, SP modelt J101 (Earphone jack)
+
set C&SA, MX, TW model t KH102 (Speaker output)

FM Section
AEP, UK, CET, IT, AR, HK, SP modelt J101 (Earphone jack)
Function switch (S101) : FM
C&SA, MX, TW model t KH102 (Speaker output)
Volume : MIN

Adjustment Value :3,000Hz

Standard Value :2,960 to 3,040Hz
FM RF signal
Frequency difference between the beginning and the end of the tape generator
should be within 1.0% (30Hz).
0.01µ F telescopic
Adjustment Location : antenna
terminal
75kHz frequency deviation by
1kHz signal.
Output level : as low as possible

level meter
Speaker output:12Ω
Earphone jack:8Ω

set +

AEP, UK, CET, IT, AR, HK, SP modelt J101 (Earphone jack)
C&SA, MX, TW model t KH102 (Speaker output)

tape speed adjustment

control inside motor

TUNER SECTION
0dB=1µV
AM Section
Function switch (S101) : AM
Volume : MIN

AM RF signal Put the lead-wire

generator antenna close to
the set.

30% amplitude modulation by 400Hz

signal.
Output level : as low as possible

8
 CFM-20

• Repeat the procedures in each adjustment several times, and the ( ) : C&SA, MX, TW model
frequency coverage and tracking adjustments should be finally < > : IT model
done by the trimmer capacitors. FM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
( ) : C&SA, MX, TW model
< > : IT model L5 10.7MHz
AM IF ADJUSTMENT FM FREQUENCY COVERAGE ADJUSTMENT
Adjust for a maximum reading on level meter. Adjust for a maximum reading on level meter.
T1 455kHz L2 87.00MHz (86.50MHz) <87.35MHz>
AM FREQUENCY COVERAGE ADJUSTMENT CT1 108.30MHz (109.50MHz) <108.25MHz>
Adjust for a maximum reading on level meter.
FM TRACKING ADJUSTMENT
L4 520kHz<516kHz> Adjust for a maximum reading on level meter.
CT3 1,680kHz (1780kHz) <1,630kHz> L1 87.00MHz (86.50MHz) <87.35MHz>
CT2 108.30MHz (109.50MHz) <108.25MHz>
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter. • Abbreviation
L3 600kHz MX : Mexican
IT : Italian
CT4 1,400kHz (1500kHz)
TW : Taiwan
C&SA : Central and South America

Adjustment Location : MAIN board

[MAIN BOARD]
(Conductor side)

CT3 : AM Frequency Coverage Adjustment

CT4 : AM Tracking Adjustment

CT2: FM Tracking Adjustment

CT1 : FM Frequency
Coverage Adjustment

[MAIN BOARD]
L3: AM Tracking Adjustment
(Component side)

L5 : FM IF Adjustment

L4 : AM Frequency
T1: AM IF Adjustment
Coverage Adjustment

L2: FM Frequency L1: FM Tracking Adjustment

Coverage Adjustment

9
CFM-20

10
 CFM-20
SECTION 4
4-1. BLOCK DIAGRAMS DIAGRAMS

ANT1 FM/AM FRONT-END PRE/POWER

FM IF AMP,DET,FM MPX AMP
TELESCOPIC
L2
ANTENNA
CT1,L2 IC1 T1 IC101
CT1 CV1
FM AM IF
FREQUENCY
COVERAGE FM OSC
CF1 AUX LINE
FM RF IN MIX OUT FM IF IN DET OUT IN OUT
L1 CT2 CV2

CT2,L1 FM RF OUT
L5 CF2
FM AM IF IN
TRACKING FM DET RV101
POWER VOLUME
IN
L3 RADIO
QUAD
AM +B BIAS
CT4 CV4 FERRITE-BAR
BIAS
ANTENNA
MX,C&SA,TW
AM RF IN
CT4,L3 SP101
AM SPRAKER
TRACKING
RADIO
+B
S101-2
AEP,UK,CET,IT,AR,HK,SP
FUNCTION
BAND SEL
TAPE/
RADIO OFF
CT3,L4
MW
FREQUENCY AM
COVERAGE
J101
BTL1
L4
FM
CT3 CV3 AM OSC

AM OSC SP101
SPRAKER
BTL2

AEP,UK,CET,IT,AR,HK,SP

HRP101 HEAD IN
REC/PB (+)
HEAD
HEAD IN T901
HE101 (-) POWER
ERASE TRANSFORMER J901
HEAD AC IN
RECT
D901,902 F901
ECM101 MIC
IN
MIC
+B

REG RIPPLE
S102 FILTER
+B
PB/REC REC/PB

S501 +B
(TAPE POWER)
M101
REEL/CAPSTAN
REG DRY BATTERY
MOTOR RADIO +B
Q101 SIZE"D"
(IEC DESIGNATION R20)
4PCS,6V
D101 D103 MX,C&SA,TW
POWER
ON/OFF
T901
POWER
S101-1 TRANSFORMER
FUNCTION D104
AC IN
RECT
TAPE/ OPR/BATT
D901,902
RADIO OFF

AEP,UK,CET,IT,AR,HK,SP
AM TAPE
D903
AUX

FM

+B

• Abbreviation
SP : Singapore
• Signal path.
HK : Hong Kong
F : FM
AR : Argentina
f : AM
MX : Mexican
E : PB
IT : Italian
a : REC
TW : Taiwan
N : MIC
C&SA : Central and South America
CET : East European & Russian
11 11
CFM-20

4-2. PRINTED WIRING BOARDS

1 2 3 4 5 6 7 8 9 10 11

ANT1
FM
A TELESCOPIC ANTENNA D107
C126 z Semiconductor

D2
C112

D1

R113
JW1
IC101 D108 Location

JW102
JW101
R122 C136 R105
15 R114
16

C122
C113
MAIN BOARD

JW106
C124

C123

C121
C114

D101
MAIN BOARD Ref. No. Location

C131
C21
L10 C111

JW104
C133
L5 C110 C120 20

C130
JW109 R112 (C&SA,MX,TW) D1 A-4
10 D104
JW108 C107 C118 R111 OPR/BATT D2 A-4

C16

JW6
EXCEPT

JW7
IT SP101

KH102
S101 R110

C109
IT C108 D101 B-5

JW3
B R121 R109
25
SPEAKER
L2 JC3 5
D102 C-8

JW103
R131 C119

C103
C116
C13

R4

BCE
-2 -1 D106 C104

C18
C15 R132 D103 B-7

JW105
C125
CF2 C106 R104
CV3 CV1

C135
L4 C132 C115
C9 D104 B-8

C134
CT1 Q101 RV101 C105 R107 R115
L2

IC1
R2

CT3 JC1 C101 D106 B-5

C102

R103
VOLUME 30 D103 KH101
R102 R116 M101
JC2 CF1
R101 JC101
R108 R106 R117 M D107 A-7
REEL/CAPSTAN

JW107
R3
R1

JW110
C5

JW111
D108 A-8
C11

CT2 MOTOR

JW113
R120 D102
CT4 CNP101
JC4 C4

C7 CV2 C19
CV4 C20 S102 S501
IC1 B-3
C2
C3

JW5 (REC/PB)
T1 (TAPE POWER)
JW4

C117 11
C17 CNP102 1-680-974- IC101 B-7
C (11)
L1 C16 CNP103
C1

HRP101 Q101 B-5

-2 -1 S101 (AEP,UK,CET,IT,AR,HK,SP)
REC/PB
FUNCTION
JW2 HEAD
JACK BOARD
FM HE101
ERASE
HEAD
POWER BOARD
L3 AM R118
AM (AEP, UK, CET, IT, AR,
ECM101
FERRITE-BAR TAPE/RADIO OFF J101 HK, SP)
MIC SP101
D ANTENNA v
(AEP,UK,CET,IT,AR,HK,SP) SPEAKER Ref. No. Location
KH103
POWR BOARD
D901 E-4
1-680-978- 11 D902 E-4
(11)

J901
JW902

AC IN
POWER BOARD
E C901 (C&SA,MX,TW)
C902 (C&SA,MX,TW)

POWR BOARD Ref. No. Location

T901 D901 G-8
D901 D902 POWER TRANSFORMER D902 G-8
D903 G-8

JW903
DRY BATTERY
SIZE "D" AC IN
F BATT(+) BOARD (IEC DESIGNATION R20) T901

KH901
CNP901
4PCS, 6V POWER TRANSFORMER
F901

D902
C901
JW901
JW902

CNP901

C902
JW901

D901
D903
11
1-680-976-
11 (11)
G 1-680-977-
(11)
KH901
11
1-680-979-
(11)

Note:
H • X : parts extracted from the component side.
• : Pattern on the side which is seen.
• f : internal component.
• Abbreviation
SP : Singapore
HK : Hong Kong
AR : Argentina
MX : Mexican
IT : Italian
TW : Taiwan
C&SA : Central and South America
CET : East European & Russian

12 12
 CFM-20

4-3. SCHEMATIC DIAGRAM – MAIN SECTION (1/2) – z Refer to page 14 for Notes. z Refer to page 14 for IC Block Diagrams.

*C3 CT1,L2
7p C&SA,AR,HK,MX,SP,TW FM
*C4
10p AEP,UK,CET,IT FREQUENCY *C5
15p C&SA,AR,HK,MX,SP,TW
L1 COVERAGE 6.8p EXCEPT IT
EXCEPT 18p AEP,UK,CET
CT2 CV2 FM RF 15p IT
IT MODEL IT MODEL 10p IT
CT2,L1 *R2
C2 C3 L2 C5 C4
FM R2 6.8k IT,C&SA,AR,HK,MX,SP,TW
10p * L2 * *
TRACKING JC3 * 4.7k AEP,UK,CET
FM OSC
JC4 BAND
CV1 CT1
CT4,L3 GND
AM C19 SIG MAIN
0.022 JW6 BOARD
TRACKING (2/2)
CT4 CV4
+B
JW5 R4
C7 C15 L5 GND
3p L3 R1 0.047 10k
AM 10
FERRITE-BAR
ANTENNA
JW4

C13 JW3
L4 C11 22p
CT3,L4 AM OSC * CT3 CV3
AM
FREQUENCY
C9
COVERAGE 0

AM RF IN

FM RF OUT

BAND SEL

FM OSC

AM OSC

AFC

DET OUT

QUAD
IC1
ANT1 TA2132AF
FM
TELESCOPIC
*C11
ANTENNA
3.3p C&SA,MX,TW
FM/AM FRONT-END
6.8p AEP,UK,CET,IT,AR,HK,SP
IF AMP,DET,FM MPX
JW1 JW7

FM RF IN

MIX OUT

AM IF IN
FM IF IN
RF GND

GND
AGC

VCC
D1 D2
1SS133 1SS133 JC2 JC1
C20 CF1 CF2
0.047
L10 C18
0.47µH C1 0.01
100p C16
4.7
50V C17
100
10V

C21 T1
100p
R3
330

13 13
CFM-20

4-4. SCHEMATIC DIAGRAM – MAIN SECTION (2/2) – z Refer to page 14 for Notes. z Refer to page 14 for IC Block Diagrams.

MX,C&SA,TW

M101 CNP102 SP101

REEL/CAPSTAN SPRAKER
D102
MOTOR 1SS133
S501 AEP,UK,CET,IT,AR,HK,SP
(TAPE POWER)
-2 -1 SP101
S101 SPRAKER
C134 D106
1000p 1SS133 FUNCTION
BAND
Q101 TAPE/ JW116
GND KTC3198BL RADIO OFF
SIG REG
+B AEP,UK,CET,IT,AR,HK,SP KH102
GND S101 AM
FUNCTION C135 J101
R132 0.01
TAPE/ 220 FM
RADIO OFF D103 KH103 R118
1SS133 100
D107 D108
AM D101 R131 AEP,UK,CET,IT,AR,HK,SP 1SS133 1SS133
MTZJ3.9B 220
R117
FM 4.7k R115 AEP,UK,CET,IT,AR,HK,SP
CNP103 680
2P R107 C132
2.2k 0.01 C130 R116
1 0.1 1k
ECM101 D901
D104 1N4002B
MIC 2 C131 L-34HD T901
JC101 470 POWER
6.3V C133 OPR/BATT
C901 TRANSFORMER
C116 220
R106 10V 0.1
0.047 C115
1k
0.01 D902 J901
1N4002B
C119 AC IN
C125 R109 R110 47 C123 C121 C122
100p C118 0.01 F901
S102 22k 15k 0.01 10V 0.1 2200
C120 16V C902 T630mAL
PB/REC R120 4700p R114 0.1 250V
1k C117 R112
R108 470k 10
1
1k 50V R111
1k
KH101 CNP901
1 1

IC101 2 2
MIC
IN

AUX
IN

TAPE
AUX

REC /PB

MIX
ON/OFF

NC

REC

POWER
ON/OFF

LPF

ALC
DEL

POP
DEL

POWER
GND

BTL2

P.VCC

P.VCC
MM1315BD KH901
DRY BATTERY
SIZE"D"
PRE/POWER (IEC DESIGNATION R20)
JW107 AMP 4PCS,6V
HEAD IN

HEAD IN

POWER

POWER
RIPPLE

RIPPLE
FILTER

FILTER

BTL1
BIAS
TAPE

TAPE

BIAS

GND

LINE

GND
VCC

OUT
MIC

SIG

SIG
N.F

EQ
NF
(+)

(–)

IN
JW108 C102 C103
C101 2.2 0.022
2200p 50V
R104 MX,C&SA,TW
R101 R103 220 C124
220 C104 0.47
15k 22 50V
25V C126
4700p
R102 C114
CNP101 22k C105 R122
10k 100p D901
HRP101 1 3P 1000p R105
1N4002B
10 T901
REC/PB R113 POWER
HEAD JW106 150 TRANSFORMER
C106 C901
3 1000p C107 C110 C111
C108 C136 C113 0.01
220 C109 0.47 100p C112 470
10V 0.01 0.01 50V 100 0.1 16V D902
HE101 10V 1N4002B AC IN
ERASE
HEAD
C902
0.01
CNP901 D903
RV101 1 1N4002B
R121 20k
6.8k VOLUME 2
KH901

14 14
 CFM-20

Note on schematic Diagram: MAIN SECTION (1/2), (2/2)

• All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or
less are not indicated except for electrolytics and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise specified.
• f : internal component.
• C : panel designation.

Note: The components identified by mark 0 or dotted line with

mark 0 are critical for safety.
Replace only with part number specified.

• A : B+ Line.
• H : adjustment for repair.
• Power voltage is dc 6V and fed with regulated dc power supply
from external power voltage jack.
• Voltages are dc with respect to ground under no-signal (detuned)
conditions.
no mark : FM
( ) : AM (RADIO SECTION), PLAY (TAPE SECTION)
< > : MIC REC
[ ] : RADIO REC
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production toler-
ances.
• Signal path.
F : FM
f : AM
E : PB
a : REC
N : MIC
• Abbreviation
SP : Singapore
HK : Hong Kong
AR : Argentina
MX : Mexican
IT : Italian
TW : Taiwan
C&SA : Central and South America
CET : East European & Russian

15
CFM-20

• IC BLOCK DIAGRAMS

IC1 TA2132AF (EL)

AM RF FM RF AM/FM FM AM DET
IN OUT SW OSC OSC AFC OUT QUAD
16 15 14 13 12 11 10 9

AM
RF
FM/AM FM AM AF
OSC OSC BUFF

FM
DET

AM
DET

FM RF
FM AM AGC
MIX MIX FM AM
IF IF

1 2 3 4 5 6 7 8
FM RF RF MIX AGC VCC FM IF AM IF GND
IN GND OUT IN IN
POWER ON/OFF

IC101 MM1315BD

POWER GND
TAPE/AUX
REC/PLAY

MIX/ECM

POP DEL
ALC DEL
AUX-IN
MIC-IN

PBTL2

P.VCC

P.VCC
REC

LPF
NC

30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
B+

+
B+ –
B+
B+ +
B+ –
B+ + B+ B+
– +
– +
B+ –

B+ +
B+
–

B+ +
+ –
B+ –
+
–
+
–
B+

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
LIN-OUT
MIC N.F

HEAD-IN(+)

TAPE NF
TAPE EQ

VBIAS

BIAS

SIG-GND

RIPPLE
FILTER

POWER IN

RIPPLE
FILTER

POWER GND

BTL1
HEAD-IN(–)

SIG VCC

16
 CFM-20
SECTION 5
EXPLODED VIEWS
NOTE :
• -XX, -X mean standardized parts, so they • The mechanical parts with no reference
may have some difference from the original number in the exploded views are not The components identified by mark 0
one. supplied. or dotted line with mark 0 are critical
• Color indication of Appearance Parts • Hardware (# mark) list and accessories and for safety.
Example : packing materials are given in the last of this Replace only with part number specified.
KNOB, BALANCE (WHITE) ••• (RED) parts list.
↑ ↑ • Abbreviation
Parts color Cabinet's color SP :Singapore
• Items marked “ * ”are not stocked since they HK :Hong Kong
are seldom required for routine service. Some AR :Argentina
delay should be anticipated when ordering MX :Mexican
these items. IT :Italian
TW :Taiwan
C&SA :Central and South America
CET :East European & Russian
5-1. FRONT CABINET SECTION

5
#1

#1

2 #1

3
4
#2

ECM101

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 X-3380-636-1 LID, CSSETTE SUB ASSY...(BLACK) 2 X-3380-918-1 CABINET (FRONT) SUB ASSY
(C&SA,SP,MX,AR,TW) (INCLUDING SP101)...(SILVER)(IT)
1 X-3380-637-1 LID, CSSETTE SUB ASSY...(SILVER) 2 X-3380-919-1 CABINET (FRONT) SUB ASSY
(AEP,UK,IT,CET,HK) (INCLUDING SP101)...(SILVER)(HK)
2 X-3380-915-1 CABINET (FRONT) SUB ASSY 3 3-226-062-01 SPRING (CAS)
(INCLUDING SP101)...(BLACK)(C&SA,MX,TW) 4 3-922-112-21 DAMPER
2 X-3380-916-1 CABINET (FRONT) SUB ASSY 5 3-226-026-01 LID, BATT...(BLACK)(C&SA,MX,TW)
(INCLUDING SP101)...(SILVER)(AEP,UK,CET)
2 X-3380-917-1 CABINET (FRONT) SUB ASSY 5 3-226-026-11 LID, BATT...(BLACK)(AR,SP)
(INCLUDING SP101)...(BLACK)(AR,SP) 5 3-226-026-31 LID, BATT...(SILVER)(AEP,UK,IT,CET,HK)
ECM101 1-542-118-11 MICROPHONE, ELECTRET CONDENSER

17
CFM-20

5-2. REAR CABINET SECTION 63

ANT1

64
60 66
56
53 54
55 57 59
65
58 67
#3
#2
61 C&SA, MX, TW

#2

68
not supplied
62
52
#2

C&SA, MX, TW 69
70 #4
#2
#2
51
not
supplied #2
#2 71
73 72
#2 C&SA, MX, TW
not supplied AEP, UK, IT, CET
HK, SP, AR
The components identified by mark 0
or dotted line with mark 0 are critical
for safety.
Replace only with part number specified.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 3-226-023-01 KNOB (TUNER)...(BLACK)(C&SA,MX,AR,SP,TW) 61 3-226-018-01 BRACKET (PWB)
51 3-226-023-21 KNOB (TUNER)...(SILVER)(AEP,UK,IT,CET,HK) 62 1-680-977-11 BATT (+) BOARD
* 52 A-3021-411-A MAIN BOARD, COMPLETE (C&SA,MX,TW) 63 3-226-027-01 HANDLE...(BLACK)(C&SA,MX,AR,SP,TW)
* 52 A-3021-413-A MAIN BOARD, COMPLETE (AEP,UK,CET) 63 3-226-027-21 HANDLE...(SILVER)(AEP,UK,IT,CET,HK)
* 52 A-3021-414-A MAIN BOARD, COMPLETE (IT) 64 3-226-054-11 KNOB (VOL)...(BLACK)(C&SA,MX,AR,SP,TW)

* 52 A-3021-494-A MAIN BOARD, COMPLETE (AR,HK,SP) 64 3-226-054-21 KNOB (VOL)...(SILVER)(AEP,UK,IT,CET,HK)

53 3-226-052-11 BUTTON (PAUSE)...(BLACK) 65 3-226-025-01 KNOB (FUN)...(BLACK)(C&SA,MX,AR,SP,TW)
(C&SA,MX,AR,SP,TW) 65 3-226-025-21 KNOB (FUN)...(SILVER)(AEP,UK,IT,CET,HK)
53 3-226-052-21 BUTTON (PAUSE)...(SILVER) 66 3-226-065-01 TERMINAL, BATT (+-)
(AEP,UK,IT,CET,HK) 67 3-226-064-01 TERMINAL, BATT (-)
54 3-226-051-11 BUTTON (STOP)...(BLACK)
(C&SA,MX,AR,SP,TW) 0 68 1-757-642-11 CORD, POWER (C&SA,MX,TW)
54 3-226-051-21 BUTTON (STOP)...(SILVER)(AEP,UK,IT,CET,HK) 69 3-226-016-11 CABINET (REAR)...(BLACK) (TW)
69 3-226-016-31 CABINET (REAR)...(BLACK) (E92)
55 3-226-050-11 BUTTON (FF)...(BLACK)(C&SA,MX,AR,SP,TW) 69 3-226-016-41 CABINET (REAR)...(BLACK) (MX)
55 3-226-050-21 BUTTON (FF)...(SILVER)(AEP,UK,IT,CET,HK) 69 3-226-016-51 CABINET (REAR)...(BLACK) (AR,SP)
56 3-226-049-11 BUTTON (REW)...(BLACK)(C&SA,MX,AR,SP,TW)
56 3-226-049-21 BUTTON (REW)...(SILVER)(AEP,UK,IT,CET,HK) 69 3-228-555-01 CABINET (REAR)...(SILVER) (AEP,IT,UK)
57 3-226-048-11 BUTTON (PLAY)...(BLACK) 69 3-228-555-11 CABINET (REAR)...(SILVER) (CET,HK)
(C&SA,MX,AR,SP,TW) 70 3-226-031-01 TERMINAL, ANT
71 3-226-022-01 GEAR (VC)
57 3-226-048-21 BUTTON (PLAY)...(SILVER)(AEP,UK,IT,CET,HK) 72 1-680-976-11 POWER BOARD (C&SA,MX,TW)
58 3-226-047-11 BUTTON (REC)...(BLACK)(C&SA,MX,AR,SP,TW)
58 3-226-047-21 BUTTON (REC)...(SILVER)(AEP,UK,IT,CET,HK) 73 1-680-979-11 POWER BOARD (AEP,UK,IT,CET,HK,SP,AR)
59 3-223-488-01 MARKER (REC) ANT1 1-754-160-11 ANTENNA, TELESCOPIC
60 1-680-978-11 JACK BOARD (AEP,UK,IT,CET,HK,SP,AR)

18
 CFM-20

5-3. MECHANISM DECK SECTION-1

(MF-M20-117)

#5
#5
HRP101 122

121
HE101

124 123
108 110
120 109
111

112 113
119 118
114
107
106
105
115

117

104
103

116
101

102

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 3-933-010-01 SPRING (S/P), TORSION 114 3-933-004-01 CLAW, REEL
102 3-933-025-01 SPRING (P), TORSION * 115 3-933-021-01 SLIDER (FRP)
103 3-040-857-01 LEVER (P)
104 3-934-024-01 ROLLER, PINCH * 116 3-933-006-01 SLIDER (EJECT)
105 3-933-019-01 SPRING (F/R), TORSION 117 3-934-833-01 SPRING (FRP)
118 3-022-794-02 SPRING (BT)
106 3-933-028-01 SPRING (FWD), TORSION 119 3-933-007-01 PLATE, LOCK
107 3-933-016-01 GEAR (S REEL) * 120 3-009-076-01 CHASSIS (HEAD)
* 108 3-933-023-11 SLIDER (REC)
109 3-933-022-01 BASE, HEAD 121 3-010-625-01 GUIDE, TAPE
* 110 3-933-017-11 SLIDER (REW) 122 3-342-917-01 SCREW (IT3-C), TAPPING, + B
123 3-936-265-01 LUG (T), PLATE
* 111 3-933-018-11 SLIDER (FF) 124 4-936-201-01 SPRING, COMPRESSION
* 112 3-933-009-11 SLIDER (STOP) HE101 1-500-680-11 HEAD, MAGNETIC (ERASE)
* 113 3-933-008-11 SLIDER (PAUSE)
HRP101 1-500-679-11 HEAD,MAGNETIC(RECORD/PLAYBACK)

19
CFM-20

5-4. MECHANISM DECK SECTION-2

(MF-M20-117)

157

156
154 158

159
155 168

160
153
S501 167

161

162

166

163
M101

152

164
#4 165
151

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
151 3-933-029-01 LEVER, ERASING PREVENTION 161 3-933-020-01 BELT
152 3-933-182-01 SPRING, CASSETTE 162 X-3377-877-2 FLYWHEEL ASSY
153 3-932-995-01 GEAR (MID) 163 3-932-993-01 CHASSIS, OUTSERT
154 X-3371-667-1 CLUTCH ASSY 164 3-343-358-01 RING, RETAINING
155 3-932-997-01 GEAR (CAM) 165 3-223-156-01 SPRING (CAM), COMPRESSION

* 156 3-932-999-01 SLIDER (SW) 166 3-934-336-01 BEARING

157 3-932-998-01 SPRING (GROUND), TORSION 167 3-939-383-02 SPRING, COMPRESSION
158 3-009-648-01 LEVER (S.OFF) 168 3-936-438-01 LEVER (K)
159 3-009-650-02 SPRING (K), COMPRESSION M101 A-3052-373-A MOTOR ASSY (REEL/CAPSTAN)
160 X-3373-572-1 REEL ASSY (N), T (INCLUDING PULLEY)
S501 1-762-679-11 SWITCH, LEAF (TAPE POWER)

20
 CFM-20
SECTION 6
BATT(+) JACK MAIN ELECTRICAL PARTS LIST

NOTE :
• Due to standardization, replacements in the • SEMICONDUCTORS
parts list may be different from the parts In each case, u : µ , for example : The components identified by mark 0
specified in the diagrams or the components uA.... : µ A.... , uPA.... : µ PA.... or dotted line with mark 0 are critical
used on the set. uPB.... : µ PB.... , uPC.... : µ PC.... for safety.
• -XX, -X mean standardized parts, so they uPD.... : µ PD.... Replace only with part number specified.
may have some difference from the original • CAPACITORS
one. uF : µ F
• RESISTORS • COILS
All resistors are in ohms uH : µ H
METAL : Metal-film resistor • Abbreviation
METAL OXIDE :Metal oxide-film resistor SP :Singapore
F : nonflammable HK :Hong Kong
• Items marked “ * ”are not stocked since AR :Argentina
they are seldom required for routine service. MX :Mexican
Some delay should be anticipated when IT :Italian
ordering these items. TW :Taiwan
C&SA :Central and South America
CET :East European & Russia

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
* 1-680-977-11 BATT (+) BOARD C9 1-216-864-11 SHORT 0
************ C11 1-162-193-31 CERAMIC 3.3PF 10% 50V
(C&SA,MX,TW)
***************************************************** C11 1-162-197-31 CERAMIC 6.8PF 10% 50V
(AEP,UK,IT,CET,AR,HK,SP)
* 1-680-978-11 JACK BOARD (AEP,UK,IT,CET,AR,HK,SP) C13 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
********** C15 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V

<JACK> C16 1-126-963-11 ELECT 4.7uF 20% 50V

C17 1-104-665-11 ELECT 100uF 20% 10V
J101 1-563-330-11 JACK (v) (AEP,UK,IT,CET,AR,HK,SP) C18 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C19 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
<CABLE HOLDER> C20 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V

* KH103 1-565-385-11 HOLDER, CABLE 4P(AEP,UK,IT,CET,AR,HK,SP) C21 1-162-282-31 CERAMIC 100PF 10% 50V
C101 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
<RESISTOR> C102 1-126-961-11 ELECT 2.2uF 20% 50V
C103 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
R118 1-216-809-11 METAL CHIP 100 5% 1/16W C104 1-128-551-11 ELECT 22uF 20% 25V
(AEP,UK,IT,CET,AR,HK,SP)
***************************************************** C105 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C106 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
* A-3021-411-A MAIN BOARD, COMPLETE (C&SA,MX,TW) C107 1-126-934-11 ELECT 220uF 20% 10V
* A-3021-413-A MAIN BOARD, COMPLETE (AEP,UK,CET) C108 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
* A-3021-414-A MAIN BOARD, COMPLETE (IT) C109 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
* A-3021-494-A MAIN BOARD, COMPLETE (AR,HK,SP)
******************** C110 1-126-959-11 ELECT 0.47uF 20% 50V
C111 1-126-935-11 ELECT 470uF 20% 16V
* 3-226-022-01 GEAR (VC) C112 1-104-665-11 ELECT 100uF 20% 10V
7-621-770-87 SCREW +P 2.6X5 C113 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C114 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
<CAPACITOR>
C115 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C1 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C116 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
C2 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V C117 1-126-960-11 ELECT 1uF 20% 50V
C3 1-162-912-11 CERAMIC CHIP 7PF 0.5PF 50V C118 1-164-227-11 CERAMIC CHIP 0,022uF 10% 25V
(C&SA,AR,HK,MX,SP,TW) C119 1-104-664-11 ELECT 47uF 20% 10V
C3 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
(AEP,UK,IT,CET) C120 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C4 1-162-203-31 CERAMIC 15PF 5% 50V C121 1-126-768-11 ELECT 2200uF 20% 16V
(C&SA,AR,HK,MX,SP,TW) C122 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C123 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C4 1-162-205-31 CERAMIC 18PF 5% 50V C124 1-126-959-11 ELECT 0.47uF 20% 50V
(AEP,UK,CET)
C4 1-162-199-31 CERAMIC 10PF 50V C125 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(IT) C126 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C5 1-162-197-31 CERAMIC 6.8PF 10% 50V C130 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
(EXCEPT IT) C131 1-126-935-11 ELECT 470uF 20% 6.3V
C5 1-162-203-31 CERAMIC 15PF 5% 50V(IT) C132 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C7 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V

21
CFM-20
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C133 1-126-934-11 ELECT 220uF 20% 10V L2 1-424-726-11 COIL, AIR-CORE (FM OSC)
C134 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V (FM FREQUENCY COVERAGE)(AEP,UK,CET)
C135 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V L2 1-419-998-11 COIL, OSCILLATION (FM OSC)
C136 1-162-927-11 CERAMIC CHIP 100PF 5% 50V (FM FREQUENCY COVERAGE)(IT)
L3 1-501-919-11 ANTENNA, FERRITE-BAR (AM TRCKING))
<FILTER>
L4 1-406-040-00 COIL (OSC) (AM OSC)
CF1 1-795-079-71 FILTER, CERAMIC (AM FREQUENCY COVERAGE)
CF2 1-781-790-11 FILTER, AM CERAMIC L5 1-409-944-11 COIL (DET) (FM DET)
L10 1-412-689-11 INDUCTOR 0.47uH
<CONNECTOR>
<TRANSISTOR>
* CNP101 1-785-669-11 PIN, CONNECTOR (PC BOARD) 3P
* CNP102 1-785-670-11 PIN, CONNECTOR (PC BOARD) 4P Q101 8-729-036-90 TRANSISTOR KTC3198BL-AT
* CNP103 1-785-668-11 PIN, CONNECTOR (PC BOARD) 2P
<RESISTOR>
<TRIMMER CAPACITOR>
R1 1-216-797-11 METAL CHIP 10 5% 1/16W
CT1 1-141-645-11 CAP, VAR (FM FREQUENCY COVERAGE) R2 1-216-829-11 METAL CHIP 4.7K 5% 1/16W
CT2 1-141-645-11 CAP, VAR (FM TRACKING) (AEP,UK,CET)
CT3 1-141-645-11 CAP, VAR (AM FREQUENCY COVERAGE) R2 1-216-831-11 METAL CHIP 6.8K 5% 1/16W
CT4 1-141-645-11 CAP, VAR (AM TRACKING) (IT,C&SA,AR,HK,MX,SP,TW)
R3 1-216-815-11 METAL CHIP 330 5% 1/16W
<VARIABLE CAPACITOR> R4 1-216-833-11 METAL CHIP 10K 5% 1/16W

CV1 1-141-645-11 CAP, VAR (TUNING) R101 1-216-835-11 METAL CHIP 15K 5% 1/16W
CV2 1-141-645-11 CAP, VAR (TUNING) R102 1-216-837-11 METAL CHIP 22K 5% 1/16W
CV3 1-141-645-11 CAP, VAR (TUNING) R103 1-216-813-11 METAL CHIP 220 5% 1/16W
CV4 1-141-645-11 CAP, VAR (TUNING) R104 1-216-813-11 METAL CHIP 220 5% 1/16W
R105 1-216-797-11 METAL CHIP 10 5% 1/16W
<DIODE>
R106 1-216-821-11 METAL CHIP 1K 5% 1/16W
D1 8-719-991-33 DIODE 1SS133T-77 R107 1-216-825-11 METAL CHIP 2.2K 5% 1/16W
D2 8-719-991-33 DIODE 1SS133T-77 R108 1-216-821-11 METAL CHIP 1K 5% 1/16W
D101 8-719-109-72 DIODE RD3.9ESB2 R109 1-216-837-11 METAL CHIP 22K 5% 1/16W
D102 8-719-991-33 DIODE 1SS133T-77 R110 1-216-835-11 METAL CHIP 15K 5% 1/16W
D103 8-719-991-33 DIODE 1SS133T-77
R111 1-216-821-11 METAL CHIP 1K 5% 1/16W
D104 8-719-059-97 LED L-34HD (OPR/BATT) R112 1-216-853-11 METAL CHIP 470K 5% 1/16W
(AEP,UK,IT,CET,AR,HK,SP) R113 1-249-407-11 CARBON 150 5% 1/4W F
D106 8-719-991-33 DIODE 1SS133T-77 R114 1-216-797-11 METAL CHIP 10 5% 1/16W
D107 8-719-991-33 DIODE 1SS133T-77 R115 1-216-819-11 METAL CHIP 680 5% 1/16W
D108 8-719-991-33 DIODE 1SS133T-77 (AEP,UK,IT,CET,AR,HK,SP)

<IC> R116 1-216-821-11 METAL CHIP 1K 5% 1/16W

(AEP,UK,IT,CET,AR,HK,SP)
IC1 8-759-697-57 IC TA2132AF(EL) R117 1-216-829-11 METAL CHIP 4.7K 5% 1/16W
IC101 8-759-467-54 IC MM1315BD (AEP,UK,IT,CET,AR,HK,SP)
R120 1-216-821-11 METAL CHIP 1K 5% 1/16W
<JUMPER RESISTOR> R121 1-216-831-11 METAL CHIP 6.8K 5% 1/16W
R122 1-216-833-11 METAL CHIP 10K 5% 1/16W
JC1 1-216-864-91 SHORT 0
JC2 1-216-864-91 SHORT 0 R131 1-249-409-11 CARBON 220 5% 1/4W F
JC3 1-216-864-91 SHORT 0 R132 1-249-409-11 CARBON 220 5% 1/4W F
(AEP,UK,CET,C&SA,AR,HK,MX,SP,TW)
JC4 1-216-864-91 SHORT 0 <VARIABLE RESISTOR>
JC101 1-216-864-91 SHORT 0
RV101 1-223-321-11 RES, VAR, CARBON 20K (VOLUME)
<CABLE HOLDER>
<SWITCH>
* KH101 1-573-287-11 HOLDER, CABLE 2P
* KH102 1-573-287-11 HOLDER, CABLE 2P S101 1-572-625-11 SWITCH, SLIDE (FUNCTION)
S102 1-786-130-11 SWITCH, PUSH (1 KEY) (REC/PB)
<COIL>
<TRNSFORMER>
L1 1-409-775-21 COIL, AIR-CORE (FM RF) (FM TRACKING)
L2 1-422-230-11 COIL, AIR-CORE (FM OSC) T1 1-433-741-11 TRANSFORMER, IF (AM IF)
(FM FREQUENCY COVERAGE) ******************************************************
(C&SA,AR,HK,MX,SP,TW)

22
 CFM-20
POWER

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
* 1-680-976-11 POWER BOARD (C&SA,MX,TW) S501 1-762-679-11 SWITCH, LEAF (TAPE POWER)
* 1-680-979-11 POWER BOARD (AEP,UK,IT,CET,AR,HK,SP) *****************************************************
***********
ACCESSORIES & PACKING MATERIALS
HOLDER, FUSE (AEP,UK,IT,CET,AR,HK,SP) ****************************

<CAPACITOR> 0 1-769-412-13 CORD, POWER (AEP,UK,IT,CET,HK,SP)

0 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK,HK)
C901 1-127-888-21 CERAMIC 0.1uF 10% 50V 0 1-783-952-11 CORD, POWER (AR)
(AEP,UK,IT,CET,AR,HK,SP) 3-228-217-11 MANUAL, INSTRUCTION (ENGLISH)
C901 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (C&SA,MX)
(C&SA,MX,TW) 3-228-217-31 MANUAL, INSTRUCTION
C902 1-127-888-21 CERAMIC 0.1uF 10% 50V (ENGLISH,SPANISH,FRENCH,GERMAN)
(AEP,UK,IT,CET,AR,HK,SP) (AEP,UK,AR,HK,SP,TW)
C902 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
(C&SA,MX,TW) 3-228-217-41 MANUAL, INSTRUCTION
(DUTCH,PORTUGUESE,ITALIAN)(AEP,IT)
<CONNECTOR> 3-228-217-51 MANUAL, INSTRUCTION
(SWEDISH,FINNISH,RUSSIAN,SLOVAK)(CET)
* CNP901 1-785-654-11 PIN, CONNECTOR (PC BOARD) 2P 3-228-217-61 MANUAL, INSTRUCTION
(POLISH,CZECH,HUGARIAN)(CET)
<DIODE> 3-228-217-71 MANUAL, INSTRUCTION (SPANISH)(C&SA,MX)
D901 8-719-063-79 DIODE 1N4002B 3-228-217-81 MANUAL, INSTRUCTION
D902 8-719-063-79 DIODE 1N4002B (TRADITIONAL CHINESE) (HK,TW)
D903 8-719-063-79 DIODE 1N4002B (C&SA,MX,TW) *****************************************************
*************
<FUSE> HARDWARE LIST
*************
0 F901 1-532-500-31 FUSE(T630mAL 250V)
(AEP,UK,IT,CET,AR,HK,SP) #1 7-685-649-79 SCREW +BVTP 3X14 TYPE2 N-S
#2 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
<JUCK> #3 7-682-148-13 SCREW +P 3X8
#4 7-621-770-87 SCREW +P 2.6X5
0 J901 1-526-838-11 INLET, AC 2P(AC IN)(AEP,UK,IT,CET,AR,HK,SP) #5 7-685-782-01 SCREW +PTT 2X5 (S)

<CABLE HOLDER>
The components identified by mark 0
* KH901 1-573-287-11 HOLDER, CABLE 2P
or dotted line with mark 0 are critical
for safety.
<TRANSFORMER> Replace only with part number specified.

0T901 1-435-928-11 TRANSFORMER, POWER (C&SA,MX,TW)

0T901 1-435-929-11 TRANSFORMER, POWER
(AEP,UK,IT,CET,AR,HK,SP)
*****************************************************

MISCELLANEOUS
*************

2 X-3380-915-1 CABINET (FRONT) SUB ASSY

(INCLUDING SP101)...(BLACK)(C&SA,MX,TW)
2 X-3380-916-1 CABINET (FRONT) SUB ASSY
(INCLUDING SP101)...(SILVER)(AEP,UK,CET)
2 X-3380-917-1 CABINET (FRONT) SUB ASSY
(INCLUDING SP101)...(BLACK)(AR,SP)
2 X-3380-918-1 CABINET (FRONT) SUB ASSY
(INCLUDING SP101)...(SILVER)(IT)
2 X-3380-919-1 CABINET (FRONT) SUB ASSY
(INCLUDING SP101)...(SILVER)(HK)

0 68 1-757-642-11 CORD, POWER (C&SA,MX,TW)

ANT1 1-754-160-11 ANTENNA, TELESCOPIC
ECM101 1-542-118-11 MICROPHONE, ELECTRET CONDENSER
HE101 1-500-680-11 HEAD, MAGNETIC (ERASE)
HRP101 1-500-679-11 HEAD,MAGNETIC(RECORD.PLAYBACK)

M101 A-3052-373-A MOTOR ASSY (REEL/CAPSTAN)

(INCLUDING PULLEY)

23
CFM-20

REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.

Ver. Date Description of Revision

1.0 2001.03 New