1st QUARTER EXAMINATION
TLE-EIM 10
Direction: Read the question carefully and shade the correct answer on your answer sheets.
1. It is a form or manifestation of atoms which compose of electric charges
A. Electrician B. Electron C. Electricity D. Proton
2. Who among the following considered to be the Newton of Electricity?
A. Ampere B. Isaac C. Mendel D. Ohms
3. Which of the following is a renewable energy source?
A. Coal B. Natural Gas C. Solar D. Oil
4. It refers to the needs for the products and services.
A. Market B. Market demand C. Supply D. Supply and demand
5. The introduction of something new in your product or service. This may be a new idea, a new method, or a
new device. If you want to increase your sales and profit, you must innovate.
A. Innovation B. Value C. Unique Selling proposition D. Product Value
6. In generating business ideas relating to Electrical Installation and Maintenance what do you call when the
entrepreneur observe what materials or skills are available in abundance in an area?
A. Examine existing goods and Services C. Examine the present and future needs
B. Examine how the needs are being satisfied D. Examine the available resources
7. Someone who actively looks for chances to improve their situation, capitalize on openings, or pursue new
avenues for personal or professional gain.
A. Opportunity Seeker B.. Risk Taker C. Persistent D. Committed to Work
8. What do you call an entrepreneur who courageous enough to face business challenges?
A. Committed to Work B. Risk Taker C. Persistent D. Opportunity Seeker
9. An electrician who are strong-willed and determined in reaching his goals.
A. Opportunity Seeker B.. Risk Taker C. Persistent D. Committed to Work
10. Jane, a new business owner, has set a goal to increase her online sales by 30% within the next six months.
Despite encountering several technical issues and market fluctuations, she develops a detailed action plan and
regularly tracks her progress to ensure she meets her target. Which Personal Entrepreneurial Competency is
Jane demonstrating?
A. Systematic Planner B) Goal Setter C) Persistent D) Committed to Work
11. Being persistent in entrepreneurship is to overcoming obstacles as a goal setter is to:
A. Developing a detailed business plan B. Tracking progress towards objectives
C. Setting clear and achievable targets D. Networking with potential clients
12. What PECS evident when an entrepreneur is not afraid of the changing needs of consumers.
A. Committed to Work B. Risk Taker C. Persistent D. Opportunity Seeker
13. The entrepreneur makes sure to reach his/her targets or plans.
A. Systematic Planner B) Goal Setter C) Persistent D) Committed to Work
14. In SMART Goals, M stand for what?
A. Marketable B. Marketing c. Merchandise D. Measurable
15. Which Personal Entrepreneurial Competency (PEC) is demonstrated when an entrepreneur actively
researches market trends and gathers data to make informed business decisions?
A. Information Seeker B. Goal oriented C. Persuasive D. Risk Taker
16. Which of the following is a common career opportunity for someone with skills in Electrical Installation and
Maintenance?
A. Graphic Designer B. Electrical Technician C. Software Developer D. Software Inspector
17. What is the role of someone who ensures that electrical systems in buildings meet safety standards?
A. Electrical Inspector B. Commercial electrician C. Residential Electrical D. Contractor
18. Which of the following professionals is responsible for designing and planning complex electrical systems
in large buildings or industrial projects, ensuring compliance with safety codes and regulations?
A. Electrical Engineer B. Residential Electrician C. Electrical Contractor D.Electrical Technician
19. It is a marketing practice of creating a name, a symbol or design that identifies and differentiates product or
services from the rest.
A. Innovation B. Branding C. Tagline D. Product
20. Which of the following best describes a key factor in the market environment for Electrical Installation and
Maintenance services?
A. The rise of remote work opportunities C. The popularity of digital marketing strategies
B.The development of new software applications D. The increasing demand for energy-efficient solutions
21. A company notices that its customers associate its products with high quality and reliability. Which aspect
of branding is the company successfully managing?
A. Brand Perception B. Logo C. Market D. Pricing
22. This stage is very important because it would determine the product to be produced or provided.
A. Establish Target Specifications C. Perform economic Analysis
B. Identity Customer Needs D. Analyze Competitive Products
23. Review and estimate the economic implications regarding development expenses, manufacturing costs,
and selling price of the product or services to be offered or provided.
A. Establish Target Specifications C. Perform economic Analysis
B. Identity Customer Needs D. Analyze Competitive Products
24. Some products may exhibit successful design attributes that should be emulated or improved upon in the
new product or service.
A. Establish Target Specifications C. Perform economic Analysis
B. Identity Customer Needs d. Analyze Competitive Products
25. 26. 27.
A. Utility box B. Flat Cord C. Blow Torch D. Junction box
28. Why is it important to regularly inspect electrical tools before use?
A. To ensure they are properly calibrated C. To check for potential hazards such as damage or wear
B. To avoid wasting time during the task D. To test if the tools are powerful enough
29. Before using a power drill for electrical work, what safety step should you always take?
A. Ensure the drill is fully charged C. Wear insulating gloves
B. Check for frayed wires on the drill cord D. Use the highest speed setting
30. 31. 32. 33.
A. Circuit breaker B. Connector C. Clamps D. Fuse
34. You are building a wooden shelf and need to secure the pieces together by driving nails into the wood.
Which tool would you use to accomplish this task?
A. Drill B. Hacksaw C. Hammer D. Mason
35. A measuring instrument used to measure dimensions with high accuracy. It consists of a main scale and a
sliding scale, which allows for readings to be taken to a fraction of the smallest division on the main scale.
A. Measuring Tape B. Multi-meter C. Steel tape D. Vernier Caliper
36. It refers to the standardized system used to denote the diameter of electrical conductors, with smaller
gauge numbers indicating larger wire diameters.
A. Multi-meter B. Steel tape C. Wire Gauge D. Vernier Caliper
37. It is versatile electrical testing tool that combines a basic digital multimeter with a current sensor. It allows
for the measurement of current without direct contact by clamping around a conductor, making it safer and
more convenient for electricians and technicians. What measuring tools is this?
A. Clamp meter B. Caliper C. Multi-Meter D. Steel tape
38. What instrument is used to measure electrical current?
A. Ammeter B. Protractor C. Ruler D. Thermometer
39. Which tool combines the functionalities of a voltmeter, ammeter, and ohmmeter in one device?
A. Clamp meter B. Multi-meter C. Steel tape D. Thermometer
40. Which tool is used to measure the diameter of wires or cables accurately?
A. Multi-meter B. Tape measure C. Wire gauge D. Vernier Caliper
41. Tools that is used in making splices and taps connection of wires.
A. Boring Tools B. Holding Tools C. Driving Tools D. Soldering Tools
42. A metallic covering used in trapping the chips flying from the workpiece.
A. Spindle B. Guard C. locking nut D. handle
43. This helps to prevent the electrical cord to suffer from the strain during and after operation.
A. Pistol Grip B. Cord Strain reliever C. Switch lock D. Electrical Cord
44. Before using a power drill for electrical work, what safety step should you always take?
A. Ensure the drill is fully charged C. Wear insulating gloves
B. Check for frayed wires on the drill cord D.. Use the highest speed setting
45. Why is it important to regularly inspect electrical tools before use?
A. To ensure they are properly calibrated C. To check for potential hazards such as damage or wear
B. To avoid wasting time during the task D. To test if the tools are powerful enough
46. What do you call a wire made of multiple strands joined-together to make a single wire?
A. Stranded wire B. Standard wire C. Solid wire d. Sealed wire
47. What do you call a wire made of single strand of copper or aluminum wire. These are used in wiring
installation inside and outside the buildings.
A. Stranded wire B. Standard wire C. Solid wire d. Sealed wire
48. It is composed of two or more electric conductors insulated from one another.
A. Cables B. Stranded cable C. Solid Cables D. Standard wire
49.What is the Letter type of a Slow Burning Insulator?
A. SBW B. SB C. WP D. PW
50. If Heat resistant insulation is to RH, What is the letter type of Slow burning Weather proof?
A. AP B. SB C. SBW D. TH
51. A customer wants to install a home theater system and needs speaker wires. Which wire gauge would you
recommend for optimal performance over a distance of 50 feet?
A. 14 gauge B. 16 gauge C. 18 Guage D. 20 Guage
52. A power equipment used chiefly for drilling in hard materials. It is a type of rotary drill with an impact
mechanism that generates a hammering motion.
A. Hammer Drill B. Hammer Grinder C. Hydraulic D. Grinder
53. A hand-held rotating machine used for grinding and cutting processes depending on the type of disc fitted
to the machine. For cutting concrete, a “diamond” cutting disc is used.
A. Hydraulic B. Drill C. Grinder D. Hammer Drill
54.A metallic covering used in trapping the chips flying from the workpiece.
A. Spindle B. Guard C. locking nut D. handle
55. Which of the following is NOT part of a Portable Electric Drill?
A. Electrical Cord B. Grinder Disk C. Pistol Grip D. Switch lock
56. An electrician finds a wire rated for lower voltage than what the instructional manual specifies. What should
the electrician do?
A. Test the wire and use it if it seems strong. B. Use the available wire since it looks similar.
C. Consult a supervisor or request the correct wire. D. Ignore the manual and proceed with installation.
57. A lubricant that has the ability to last longer than other oil lubricants and greases because of their ability to
form a thin film on applied surfaces.
A. Dry Lubricants B. Grease C. Oils D. Solid Lubricant
58. Consist of soap emulsified with mineral or vegetable oil that provides lubricating properties.
A. Dry Lubricants B. Grease C. Oils D. Solid Lubricant
59. A factory maintenance team is looking for a lubricant to protect metal surfaces from corrosion in humid
environments. What is the best choice?
A. Anti-corrosion spray C. Vegetable Oil
B. Grease D. Solid lubricant
60. You are maintaining a bicycle chain and need a lubricant that can handle both dry and wet conditions
without attracting too much dirt. Which lubricant should you use?
A. Anti-corrosion Lubricant C. Engine oil
B. Chain Lubricant D. Heavy Duty Grease
