Product Name: DPI-411 Black (QD) Ink
Substrates Marked
Preferred: Metals, Plastics, Rubber, Wood
Acceptable: Non-porous and porous substrates
Product Specifications/Characteristics
UN Number 1210 Flash Point 24° F (-4°C)
Type Ink Jet Recommended Storage 32°- 90° F (0°C – 32.2°C)
Colorant Dye Shelf Life 2 years
Viscosity Liquid Package Vapor barrier polyethylene
Drying Time 1-5 seconds Unit Various
Open Time N/A Density 7.59 lbs/gal
DOT Regulations Flammable RCRA Waste Number D001, F003
VOC 865 g/l Thinner N/A
SDS Sheet Number 4785 Cleaner JAM-7500 Cleaner
HMIS Rating 1-3-0 NFPA Rating 1-3-0
Carcinogen No Specific Gravity 0.911
Description/Special Properties
Ink jet ink for non-porous surfaces. Dry times for this ink will be 1-5 seconds. This ink shows excellent open
times and adhesion to a variety of non-porous substrates. Dry times for this ink can be speeded up with air
or heated air. This ink will show good UV resistance for applications where the final ink mark will be
subjected to UV light for an extended period of time. This ink has been tested and approved as an APA
Trademark Ink.
Application/Compatibility
Printhead: 8000+
Rubber Compounds: N/A
Formulations Available
Item Number Unit of Measure
71002022 Case of 6 x 1 Liter Bottles
71002018 Case of 2 x 4 Liter Bottles
71002844 5 Gallon Pail
71002019 55 Gallon Drum
A Safety Data Sheet is furnished with every order.
Original Date: November 11, 2012
Revision Date: March 23, 2017
Matthews Marking Systems | Matthews Brand Solutions
6515 Penn Avenue | Pittsburgh, PA 15206 | USA
T: 412 665 2500 | F: 412 665 2550 | www.matthewsmarking.com
