Scribd
Upload
14 views3 pages

Ez Mulz 4037 Tds

EZ-Mulz 4037 is a sulfonate-free emulsifier base for naphthenic oils, suitable for formulating soluble and semi-synthetic metalworking fluids. It offers excellent emulsion stability, lubricity, and corrosion protection, while being free from harmful substances like chlorine and heavy metals. Typical applications include general-purpose and heavy-duty soluble oils, as well as semi-synthetic fluid concentrates.

Uploaded by

francisco pena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views3 pages

Ez Mulz 4037 Tds

EZ-Mulz 4037 is a sulfonate-free emulsifier base for naphthenic oils, suitable for formulating soluble and semi-synthetic metalworking fluids. It offers excellent emulsion stability, lubricity, and corrosion protection, while being free from harmful substances like chlorine and heavy metals. Typical applications include general-purpose and heavy-duty soluble oils, as well as semi-synthetic fluid concentrates.

Uploaded by

francisco pena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Technical Data Sheet

Product Type

EZ-MULZ™ 4037 Metal Processing


Premium Emulsifier Base for Naphthenic Oils

Application

EZ-Mulz 4037 is a unique, sulfonate-free emulsifier base designed to emulsify naphthenic oils with aniline points of 195° F
or lower.

Based on nonionic and anionic emulsifiers, corrosion inhibitors, buffering agents and other component, EZ-Mulz 4037 is
ideal for formulating soluble and semi-synthetic metalworking fluids.

EZ-Mulz 4037 is free from chlorine, nitrites, phenols and heavy metals and is non-staining on aluminum

Typical Properties

Test Typical
Appearance Clear, reddish liquid
Specific gravity at 25° C 1.0
Water wt. % 5.0
Total acid number, mg KOH/g 50
pH at 1.0% in water 8.7

Benefits

• Excellent emulsion stability in all naphthenic oils


• Good lubricity and EP properties
• Low foam and hard water stable
• Good corrosion protection in for ferrous metals
• Compatible with extreme pressure additives such as chlorinated or sulfurized compounds

Performance

Corrosion on cast iron ships – ASTM D-4627-92


Ratings scale: 0 = no rust and 5 = 100% rust

5% emulsion of 15% EZ–Mulz 4037 in oil……..0


Typical Applications
General-purpose soluble oil
100 SUS naphthenic oil 81 - 85%
EZ-Mulz 4037 15%
Biocide 0 – 3%
Fungicide 0 – 1%

Heavy-duty soluble oil


100 SUS naphthenic oil 71 - 75%
EZ Mulz 4037 25%
Biocide 0 – 3%
Fungicide 0 – 1%

Semi-Synthetic Fluid Concentrate


Part I – Oil Phase
100 SUS naphthenic oil 44%
EZ Mulz 4037 50%
Biocide 5%
Fungicide 2%
Part II Add oil phase to water while mixing
Water 55-60%
Oil phase 40-45%
Recommended use of semi-synthetic concentrate
General machining 5-10%
Heavy-duty machining 10-20%

Storage and Handling

Recommended Maximum Long Term


Ambient
Storage Temperature*
Recommended Minimum Temperature for
Ambient
Use
Flash Point >150°C COC

*Do not store with excessive heat (>150° F) over long periods.

Lockhart Chemical Company


4302 James P Cole Boulevard Flint, MI 48505
Phone: 1-810-789-8330 Fax:1-810-789-3266
www.lockhartchem.com
email: [email protected]

DISCLAIMER: To the best of our knowledge, the information and recommendations contained herein are accurate. However, this information and
recommendations are furnished without any warranty, representation or license of any kind. Users of our products are encouraged to run their own
tests to ensure product fitness for their applications. Furthermore, users assume sole liability for any patent infringement that occurs by reason of
following our recommendations or using the information given
EZ-Mulz is a Trademark of the Lockhart Chemical Company 2/1/2017

You might also like