Report

No. ZAMIL-R98114

LIFTING EQUIPMENT Area : Inspection Date: Inspection Time: Previous sticker Issued by
INSPECTION REPORT
Uthmaniyah 09/Mar/2025 08:30 8911 TUV-SUD

Department/Contractor Equipment No Equipment Location: Inspection Result : New sticker No.

ARABIAN MACHINERY & ATC-039 TAQA SITE-12 / ARAMCO Pass ZAM-BS-25992

HEAVY EQUIPMENT CO
(AMHEC)
Manufacturer: Model: Capacity: Type: Equipment serial Number Sticker Expiration Date:

LIEBHERR LTM1100-5.2 100 t MOBILE CRANE AT-H 092945 08/Jun/2025

Above equipment was inspected by ZAMIL INSPECTION accordance with applicable Saudi Aramco GI's, ASME and API standards.
Deficiencies that require corrective action listed below. Specific repairs to correct each deficiency should be noted in the corrective action taken column.

No DEFICIENCIES CORRECTIVE ACTION TAKEN

1 PERIODIC INSPECTION VISUAL AND FUNCTIONAL TEST WERE CARRIED OUT BASED ON ARAMCO GI 7.030,ASME B 30.5 & ASME B 30.10.

2 THE EQUIPMENT CONDITION FOUND SATISFACTORY AT THE TIME OF INSPECTION.

3 MAIN & AUX HOOK BLOCKS AND BOTH WIRE ROPES CONDITION FOUND SATISFACTORY.

4 MAIN HOOK BLOCK SWL : 100 t / 4 PART LINES / SN - 360533-01.

5 AUX HOOK BLOCK SWL : 8.8 t / SN - 352944-01 / PLATE NO - 1565 DAA

6 WIRE ROPE DIA : 21 MM / FLY JIB STOWED IN POSITION.

7 FOLLOW THE PROPER PM AS PER THE MANUFACTURE INSTRUCTIONS.

RECEIVER NAME BADGE No TELEPHONE No INSPECTOR NAME CERTIFICATE NO TELEPHONE No

DEEPAK 1540 -- Nabeel Ahmad SAP No 80019127 0540741701

RECEIVER SIGNATURE INSPECTOR SIGNATURE

When re-inspection is requested, a complete copy of this report should be ready reviewed by the inspector.

1/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remarks

1 GENERAL REQUIREMENTS

1.1 Equipment documentation is available ASME B30.5

Sec:5-2.1.5

1.2 Preventive Maintenance is established and updated records are ASME B30.5
maintained Sec:5-2.3.1

1.3 Daily pre-operational inspection checklists are checked GI 7.030

Para: 5.1.2

1.4 Vehicle government registration card (ISTIMARA) and GI 7.030

Government periodic inspection are maintained and valid at all Para: 7.1.2 Note:5
times for equipment that has a vehicle plate.

1.5 Durable load chart is provided in an accessible location ASME B30.5

Sec: 5-1.1.3 (b)

1.6 Work areas chart is available G.I. 7.025

ASME B30.5
Sec 5-1.1.3(2)

1.7 Operator is certified (for the inspected crane type/model) and G.I. 7.025
licensed ASME B30.5
Sec: 5-3.1.1

1.8 A sign is posted warning the operator not to rely solely on any SAES-B067 Sec:4.4
automatic device as a substitute for safe operating practice

1.9 Crane is painted safety yellow SAES-B067 Sec:4.4

1.10 Crane is painted safety yellow-and-black stripes on offshore SAES-B067 Sec:4.4

facilities

1.11 Rated capacity of crane is marked (Arabic & English) SAES-B067 Sec:4.4

1.12 Fire extinguisher is in place with minimum rating 10 BC ASME B30.5

Sec: 5-3.4.10

1.13 Markings and direction of all control levers are clearly displayed ASME B30.5
Sec:5-1.6.1-1
Sec:5-1.6.1-2

1.14 Crane backward stability is in accordance with manufacturers ASME B30.5

standard (minimum radius and no load condition ) Sec:5-1.2.1

2 INSPECTION POINTS (MOBILE & CRAWLER CRANES)

2.1 Load- holding check valve for boom is operational ASME B30.5
Sec:5-1.3.1 (d)

2.2 Two (2) Two (2) full wraps of rope remain on the drum when hook ASME B30.5
is in the extreme low positionfull wraps of rope remain on the drum Sec:5-1.3.1
when hook is in the extreme low position

2.3 Swing control is smoothly operating on acceleration and ASME B30.5

deceleration Sec:5-1.4.1

2/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remarks

2.4 Swing braking operates, as well as positive locking devices ASME B30.5
(manual and auto) Sec: 5-1.4.2

Travel controls are properly operating/functioning ASME B30.5

2.5
Sec: 5-1.1.3

Auxiliary travel controls function correctly for multiple control- ASME B30.5
2.6 station cranes Sec: 5-1.5.1

Travel brakes and locks for crawler cranes are correctly operating ASME B30.5
2.7
Sec: 5-1.5.3

Travel brakes and locks for wheel-mounted cranes are correctly ASME B30.5
2.8 operating Sec: 5-1.5.3

Power plant controls of superstructure -mounted power plant ASME B30.5

2.9 working properly Sec: 5-1.6.3

Rotation-resistant and fiber-core ropes are not used for boom ASME B30.5
2.10 hoist reeving Sec: 5-1.7.2

Sheave grooves have surface smoothness without any defects ASME B30.5
2.11
Sec: 5-1.7.4

Sheave guards are in place on the lower block ASME B30.5

2.12
Sec: 5-1.7.4

All sheaves can be lubricated (except permanently lubricated ASME B30.5

2.13 types) Sec: 5-1.7.4 (d)

All cab glazing are safety glazing material ASME B30.5

2.14
Sec: 5-1.8.1

Verify cab doors functionality and condition ASME B30.5

2.15
Sec: 5-1.8.1

Seat belt is fitted and in good condition ASME B30.5

2.16
Sec: 5-1.8.1 (f)

Walking platforms and areas of structure are skid-resistance ASME B30.5

2.17
Sec: 5-1.8.2

Guard rails are fitted ASME B30.5

2.18
Sec: 5-1.9.7

Fixed or telescoping bumper for boom stop is functional (if fitted) ASME B30.5
2.19
Sec: 5-1.9.1

Shock absorbing bumper for boom stop is functional (if fitted) ASME B30.5
2.20
Sec: 5-1.9.1

Hydraulic boom elevating cylinder, used as boom stop, is ASME B30.5

2.21 functional (if fitted) Sec:5-1.9.1

Boom angle indicator is fitted, operable, and can be read from the ASME B30.5
2.22 operator station Sec:5-1.9.1

3/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remarks

Boom shut-off or hydraulic reliefs provided for high angle boom ASME B30.5
2.23 condition Sec: 5-1.9.1 (d)
Boom length indicator is fitted for telescoping booms ,and is ASME B30.5
2.24 working Sec: 5-1.9.1
Anti-two-blocking devices are fitted and working (main and ASME B30.5
2.25 auxiliary) Sec: 5-3.2.3
Operation and accuracy of the fitted Load Indicator, RCI or RCL ASME B30.5
2.26 (compare with load chart) Sec: 5-1.9.10.2

2.27 LMI is fitted, operational and accurate for bool length, rated load, ASME B30.5
angle, radius, etc. (for 3 ton cranes or more) Sec: 5-1.9.10.2

2.28 Outriggers and jacks are not leaking oil ASME B30.5
Sec:5-2.1.3

2.29 Jack is in good operating condition at each outrigger ASME B30.5

sec: ASME B30.5
Sec:5-2.1.3 (d)

2.30 Each outrigger jack locking device is functional (if fitted) ASME B30.5
Sec: 5-1.9.3 (c)

2.31 No leakage from each jack seal when the crane is jacked up ASME B30.5
Sec: 5-1.9.3 (c)

2.32 Outrigger jack bolts are fully secure ASME B30.5

Sec: 5-1.9.3 (b)

2.33 All road wheel nuts are fully secure ASME B30.5
Sec: 5-2.1.3(b)

2.34 All tires are serviceable and without damage or excess wear ASME B30.5
Sec: 5-2.1.3(k)

2.35 Fuel tank supports and straps are secure ASME B30.5
Sec: 5-2.1.3(g)

2.36 Hydraulic oil tank supports and straps are secure ASME B30.5
Sec: 5-2.1.3(g)

2.37 Underside of chassis shows no obvious faults ASME B30.5

Sec: 5-2.1.3

2.38 Outrigger boxes are not cracked ASME B30.5

Sec: 5-2.1.3

2.39 Front and rear steering cylinder anchor points and pins are secure ASME B30.5
Sec: 5-2.1.3

2.40 Track rod end joints are not worn and are secure ASME B30.5
Sec: 5-2.1.3

2.41 Axle bolts and nuts are fully secure ASME B30.5
Sec: 5-2.1.

2.42 Wheel hub oil seals are not leaking ASME B30.5
Sec: 5-2.1.3

4/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM Remarks
No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A

2.43 Brake linings are not oil contaminated ASME B30.5

Sec: 5-2.1.3

2.44 Brake hoses have not deteriorated, e.g. cracks, splits, leaks, etc. ASME B30.5
Sec: 5-2.1.3

2.45 All chassis cross members are not cracked or corroded ASME B30.5
Sec: 5-2.1.3

2.46 Transmission mounting bolts and bushings are secure ASME B30.5
Sec: 5-2.1.3

2.47 All drive shaft bolts and universal joints are not worn ASME B30.5
Sec: 5-2.1.3

2.48 Ring gear bolts are fully secure ASME B30.5

Sec: 5-2.1.3

2.49 All hydraulic hoses under chassis have not deteriorated (cracks , splits , leaks ) ASME B30.5
Sec: 5-2.1.2

2.50 Engine shows no major oil leakage ASME B30.5

Sec: 5-2.1.3

2.51 Radiator does not leak water ASME B30.5

Sec: 5-2.1.3

2.52 Rope is free of kinking, crushing, birdcaging, or any other damage resulting in ASME B30.5
distortion of the rope structure Sec: 5-2.4.3
• No more 1 broken wire protruding from the core
• There are no reductions from nominal rope diameter of more than 5% For
running ropes:
• No more than 6 randomly broken wires in 1 lay or 3 broken wires in 1 strand of 1
lay For rotation resistance ropes :
• No more than 2 randomly distributed broken wires in six rope diameters or 4
randomly distributed broken wires in 30 rope diameters
• Evidence of any heat damage from any cause.

2.53 Main hoist drum mounting bolts are secure ASME B30.5
Sec: 5-2.1.3

2.54 Rear telescope side and top wear pads are serviceable ASME B30.5
Sec: 5-2.1.3

2.55 Bottom and side wear pads of telescope sections are serviceable ASME B30.5
Sec: 5-2.1.3

2.56 Boom heel pin bushes are not worn (rock boom up and down to check this) ASME B30.5
Sec: 5-2.1.3

5/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM Remarks
No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A

Center swivel coupling pipes and hoses do not leak ASME B30.5
2.57
Sec: 5-2.1.3

Center swivel coupling bolts are all secure ASME B30.5

2.58
Sec: 5-2.1.3

Boom lift cylinder anchor bolts and bushings are secure ASME B30.5
2.59
Sec: 5-2.1.3

Swing gearbox bottom oil seal and drive gear are in a serviceable condition ASME B30.5
2.60 (Should be well lubricated) Sec: 5-2.1.3

Wire rope clips shall be drop-forged steel of the single saddle U bolt or doubled ASME B30.5
2.61 saddle type clip for end termination. Sec: 5-1.7.3(b)

Emergency switch / Power take off switch need to be verified ASME B30.5
2.62
Sec: 5-1.6.1(e)

3 CRANE CAB

Horn and wind speed anemometer are working ASME B30.5

3.1

Crane level indicator is fitted and working ASME B30.5

3.2

Engine gauges and associated indicators are working ASME B30.5

3.3

The warning sign stating power line required clearances is visible to the operator ASME B30.5
3.4

Load block sheaves turn freely and are undamaged ASME B30.5
3.5

Dead end rope anchor is correctly made with a suitable wedge socket and loop- ASME B30.5
3.6 back termination

Hook assemblies are equipped with safety latches G.I. 7.030

3.7

Hook assembly labeling and manufacturer data is clearly marked ASME B30.5
3.8

Hook's weight is clearly marked/printed on the hook ASME B30.5

3.9

Safe working load of hook is clearly marked on the item ASME B30.5
3.10

Hook does not show defects such as nicks, cracks and gouges ASME B30.10
3.11

Hook is not bent or twisted • Max. bending or twisting not to exceed 10 degrees ASME B30.10
3.12
from plane of unbent hook or as per manufacturer recommendations

Hook is not distorted in the throat opening • Max. allowable throat opening is 5% ASME B30.10
3.13
not to exceed 1?4 in. (6 mm) compared to new hook, or as per manufacturer
recommendations

Maximum wear in the hook bowl is not exceeding 10% (compared to new hook) or ASME B30.10
3.14
as per manufacturer recommendations

Hook is not cracked, gouged or shows nicks ASME B30.10

3.15

6/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remarks

No.

Hook can lock (if it is a self-locking hook) ASME B30.10

3.16

Inoperative latch (if provided) — any damaged latch or malfunctioning latch that ASME B30.10
3.17
does not close the hook's throa

Rope guards and locked in position with pins (hook block)

3.18 ASME B30.10

Dead end rope anchor is fitted with a lock pin (hook block)
3.19 ASME B30.10

Dead end rope anchor is correctly made with a suitable wedge socket and loop-
3.20 ASME B30.10
back termination

Reverse travel alarm is operational

3.21 ASME B30.5

Turning signals and indicators are working correctly

3.22 ASME B30.5

Road lighting, including spotlights, are in good condition and operable

3.23 ASME B30.5

Dry friction brakes and clutches shall be protected against rain and other liquids
3.24 ASME B30.5
such as oil and lubricants

4.0 CRAWLER CRANE

Track pads are undamaged and drive chain are tensioned

4.1 ASME B30.5

Drive sockets and drive chain tumblers are serviceable

4.2 ASME B30.5

Top and bottom swing rollers and tracks are in good overall condition (Should be
4.3 ASME B30.5
well lubricated)

Track idlers are serviceable

4.4 ASME B30.5

Back boom stops are functioning

4.5 ASME B30.5

Back A-Frame is in good condition

4.6 ASME B30.5

Boom cut-out (at maximum angle) is operable

4.7 ASME B30.5

Power low lowering is operational

4.8 ASME B30.5

Boom hoist safety auxiliary ratchet / pawl lock is engaging

4.9 ASME B30.5

Boom chords and lacings are undamaged (bent)

4.10 ASME B30.5

Sheave grooves are free from surface defects that could cause rope damage.
4.11 ASME B30.5

Pendant ropers are showing no broken wires (see no. 48)

4.12 ASME B30.5

7/9
SAUDI ARAMCO INSPECTION CHECKLIST SAIC NUMBER ISSUE DATE DISCIPLINE
12-Jan-23 ELEVATING/LIFTING
MOBILE / CRAWLER CRANES SAIC-U-7007 EQUIPMENT

PROJECT TITLE WBS/BI/JO NUMBER INSPECTION COMPANY

ARAMCO ZAM-10677-03-25 ZAMIL Inspection & Cont.

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION/TYPE SERIAL NO.

ATC-039 MOBILE CRANE AT-H 092945

REPORT No.:
CAPACITY (SWL) MANUFACTURER FACILITY / LOCATION ZAMIL-R98114
Uthmaniyah.TAQA
100 t LIEBHERR SITE-12/ARAMCO
REQUESTED INSPECTION DATE RFI No. TASK COMPLETED DATE EQUIPMENT OWNER

06/Mar/2025 09/Mar/2025 ARABIAN MACHINERY & HEAVY EQUIPMENT CO

(AMHEC)

ITEM No. ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A Remarks

Operation of steering brakes is satisfactory

4.13 ASME B30.5

Main machinery guarding is in place

4.14 ASME B30.5

Main clutch is fully operational

4.15 ASME B30.5

Main boom and hoist drum brakes are fully functional

4.16 ASME B30.5

REMARKS:

REFERENCE DOCUMENTS:

1- ASME B30.5 - 2021 Issue: Mobile & Locomotive Cranes

2- ASME B30.10 - 2019 Issue: Hooks

3- SAES-B067 - 2020 Issue: Safety Identification and Safety Colors

4- SA GI 7.025-2018 Issue: Heavy Equipment Operator and Rigger Testing and Certification

Load Tested By (If Applicable):

Name, Signature, & Date:

Inspected Witnessed by 3rd Party Certified Inspector:

Name, Signature, Certificate No. & Company:

Nabeel Ahmad , SAP No 80019127 , ZAMIL Inspection & Cont.

User Representative:
Name, Signature, & Date:

DEEPAK , 09/Mar/2025

8/9
 Zamil Inspection & Contracting Co.
+966555052687 [email protected]

NO. : ZAM-BS-25992
EQUIP. No : ATC-039
EQUIP. S.N: .092945
DATE INSPECTED: .09/Mar/2025
NEXT INSPECTION DATE: 08/Jun/2025

INSPECTED BY: Nabeel Ahmad

Inspector / SAP NO. : SAP No 80019127

SA Inspection dept. Approval Contractor Agency