अनुबंध|Contract
अनुबंध मांक|Contract No: GEMC-511687758005261
अनुबंध त थ|Generated Date : 20-Dec-2024
संगठन ववरण|Organisation Details खरीदार ववरण|Buyer Details
प|Type : Central Government पद|Designation : ADMM KGP
मं ालय|Ministry : Ministry of Railways संपक नंबर|Contact No. : 03222-223738-
वभाग|Department : Indian Railways ईमेल आईडी|Email ID :
[email protected] संगठन का नाम|Organisation Name : South Eastern Railway जीएसट आईएन|GSTIN : 19AAAGM0289C1ZG
कायालय े |Office Zone: South Eastern Railway Office of the Sr. DMM/KGP, Bunglow no. 251, in front of DRM
पता|Address : building, near SBI ATM, Kharagpur.,
West Medinipur, WEST BENGAL-721301, India
व ीय वीकृ त ववरण|Financial Approval Detail भुगतान ा धकरण ववरण|Paying Authority Details
आईएफडी सहम त|IFD Concurrence : No Role: BUYER
शास नक अनुमोदन का पदनाम| भुगतान का तरीका|
Sr DEE G KGP Railways
Designation of Administrative Approval: Payment Mode:
व ीय अनुमोदन का पदनाम| पद|Designation : ADMM KGP
Sr DFM KGP
Designation of Financial Approval : ईमेल आईडी|Email ID :
[email protected] जीएसट आईएन|GSTIN : 19AAAGM0289C1ZG
Office of the Sr. DMM/KGP, Bunglow no. 251, in front of DRM
पता|Address: building, near SBI ATM, Kharagpur.,
West Medinipur, WEST BENGAL-721301, India
व े ता ववरण|Seller Details
जेम व े ता आईडी|GeM Seller ID : IOYE230008220206
कंपनी का नाम|Company Name : PRIDE ENTERPRISE
संपक नंबर|Contact No. : 07979053479
ईमेल आईडी|Email ID : [email protected]
1ST FLOOR BLOCK A,PROP NO 226 SECTOR 8,DWARKA,NEW DELHI,
पता| Address :
South West delhi, DELHI-110077, -
एमएसएमई पंजीकरण सं या|MSME Registration number : UDYAM-DL-03-0030670
जीएसट आईएन|GSTIN: 07ABCFP9774B1Z2 (R)
एमएसई सामा जक ेणी|MSE Social Category : General
एमएसई लंग ेणी|MSE Gender : Male
* जसके नाम के प म GST/TAX इनवॉइस पेश कया जाएगा|GST / Tax invoice to be raised in the name of - Consignee
वतरण नदश | Delivery Instructions : NA
उ पाद ववरण|Product Details
मू य
(INR म सभी
कर वभाजन
आइटम इकाई मू य शु क और कर
(INR)|
ववरण| इकाई | (INR)| स हत)|
# आइटम ववरण|Item Description Tax
Ordered Unit Unit Price Price
Bifurcation
Quantity (INR) (Inclusive of
(INR)
all Duties and
Taxes in INR)
उ पाद का नाम |Product Name : surya LED Luminaire For Road And Street Lighting Rating - 45 Watt
ांड|Brand : surya
ांड कार|Brand Type : Registered Brand
कैटलॉग क त|Catalogue Status: OEM verified catalogue
1 कैसे बेचा जा रहा है|Selling As : OEM verified Reseller 125 pieces 1,600 NA 200,000
ेणी का नाम और चतुथाश|Category Name & Quadrant : LED Luminaire for Road and Street Lights (V2)
Conforming to IS 10322 (Part 5 / Section 3) (Q3)
मॉडल|Model: SLE UL 45W IP66 LED STREET LIGHT
एचएसएन कोड|HSN Code: HSN not specified by seller
कुल ऑडर मू य |Total Order Value (in INR) 200,000
परे षती ववरण|Consignee Detail
वतरण पूरा कब
दनांक के बाद
तक करना है|
डलीवरी शु
लॉट नंबर| Delivery To
.सं.|S.No परे षती|Consignee व तु|Item मा ा|Quantity करना है|
Lot No. Be
Delivery Start
Completed
After
By
पद| Designation : SSE ELECTRICAL SOUTH KGP
ईमेल आईडी|Email ID : [email protected] surya LED Luminaire For
संपक|Contact : - Road And Street
1 - 125 20-Dec-2024 04-Jan-2025
जीएसट आईएन|GSTIN : - Lighting Rating - 45
पता|Address : OFFICE OF THE SSE(ELECT)/SOUTH/KGP, KHARAGPUR, Watt
West Medinipur, WEST BENGAL-721301, India
Product Specification for surya LED Luminaire For Road And Street Lighting Rating - 45 Watt
व नदश|Specification उप- व नदश|Sub-Spec मू य|Value
Description of the stores LED Luminaire For Road And Street Lighting
Conforming to IS 10322 (Part 5/Section 3) and Particular Requirements for LED Street Lighting Luminaire
Conformity of the specification
conforming to IS 16107 (Part 2/Section 2)
Type of luminaire [Ref. Cl. 1.1 of IS
Type A
16107(Part 2/Section 2)]
STANDARDS
Photobiological safety of LEDs (Ref. IS
Exempt Group
16108)
BIS CRS compliance for LED luminaire for
Compliance to IS 10322/Part 5/Section 3
road and street lighting
BIS CRS Number - Must declare 83005432
LED Rating (in Watts)/ System Wattage/
45
Rated Power
LED luminaire luminous Efficacy
(Lumen/watt) (Hint: Total Lumen
Calculation: Example: 18 W LED Rating x
100 Lumen/Watt = 1800 Lumens, 18 W LED 100
LED RATING Rating x 120 Lumen / Watt = 2160 Lumens,
18 W LED Rating x 140 Lumen/Watt = 2520
Lumens)
Color Temperature of LEDs (in K ) 6500
Tolerance for Correlated Color
As per Table 4 of clause 9.2 of IS 16107 Part 2/Section 2
Temperature (CCT)
Rated voltage / Luminaire works on 230 V, 50 Hz, AC / Single phase three wires system (Phase, Neutral and Earth)
Input operating voltage range and
90 to 300 Volts AC at 50 Hz +/-2
frequency
Automatic higher cut off voltage Above 300 Volt
ELECTRICAL
CHARACTERISTIC AC power factor at full load ≥ 0.90
Total Harmonics Distortion ≤ 20 %
Colour Rendering Index(CRI) ≥ 70
LED Beam Angle ≥ 120
Number of electronic control gear in the
1
luminaire (power supplies)
CONTROL GEAR
The total circuit power As per clause 8 of IS 16104
Efficiency ≥ 85% (up to 70 W)
Protection of the entire housing (both LED
section and driver section) as per IS 10322 IP 66
(Part 1)
Output Short Circuit Protection, Output Overload Protection, Input Over Voltage Protection, Input and
Other protection
Output Reverse Polarity and as per IS 10322/Part 5/Section 3
PROTECTION
The luminaire protected against surges
4
and transients, Internal, (in KV, Minimum)
The luminaire is protected against surges
and transients, External, (in KV, Minimum) 0
(hint: In case of no protection select "0")
Working life for LED (in Hours) (Burning
50000
CONSTRUCTION hours as per LM-80 and LM 21 Reports)
Optic lens material (UV stabilised) Poly carbonate lens / PMMA
Luminaires casing/housing (single piece housing): Pressure die casted aluminium alloy with higher thermal
conductivity, The luminaire body: Corrosion resistant powder coated, Heat sink: The heat sink provided with
die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively, Material of the
Construction of Luminaire
fasteners: Stainless steel (Grade - 304), MCPCB provided with FR4 grade minimum 0.8 to 1.0 mm thick or
more, Driver components: Industrial grade, Light Source: SMD LED Chip as per LM 80, Soldering point
temperature: Not exceed 85 deg C at ambient temperature 25 deg C
Moulded / Extruded silicon loop gasket provided in the luminaire body to ensure a weatherproof seal
between the UV Glass cover and the metal housing to exclude the entry of dust, water, insects, etc., and
Construction of Luminaire Body the Luminaries cover material provided with Clear Toughened glass with 4 mm thick /Clear Polycarbonate.
The Optical cover material not get discoloured and not suffer degradation due to heat and ageing within
LUMINAIRE
the warranty period. Suitable connector is provided for LED connection between driver output and LED,
Capacitor rated temperature is > / =105 deg C
Provision of luminaire connecting wire
40 cm (ISI marked to IS 9968)
along with the supply of material
Minimum operating temperature -10 deg C
Maximum operating temperature +50 deg C
Operating Humidity Range 10 % to 95% RH
Additional requirement NA
Manufactures name and brand on the aluminium die cast body :Engraved/Embossed, Manufacturer’s
Marking requirements for the LED name, model number, serial number on the Luminaire, Date of manufacture (month-year), and lot number
Luminaire as identification mark inside of each unit and the outside of each packaging box, Operation characteristics
voltage and power be marked inside of each LED luminaire unit
Diameter of pole luminaire suitable for [(up
MARKING
to 45W: the Pole OD shall be 40mm),
Yes
(>45W<120W: the Pole OD Shall be 50 mm),
(above 120W: the pole OD shall be 60 mm)]
OSRAM / NICHIA / CREE / SAMSUNG / SEOUL / LUMILEDS / PHILIPS / SYSKA / LUMENMAX / EVERLIGHT /
LED Make
EDISON / BRIDGELUX / NATIONSTAR / REFOND/APT
Warranty for free replacement (in years) 2
EMI/EMC compliance as applicable Yes
Availability of LM 79 (Photometry) report
(Ref IS 16106) from Central Government
Lab /NABL accredited/ILAC accredited lab
Yes
(LM-79 report shall contains total lumen
output, power, PF, Current in Amps, CRI &
CCT, etc)
Availability of LM 80 and TM 21 (Ref IS
REPORTS AND
16105) report and Photo biological report
CERTIFICATIONS
for LED from Central Government Lab
Yes
/NABL accredited /ILAC accredited lab (LM-
80 report shall contain Photo Biological
report)
Availability of test report for luminaire from
Central Government Lab /NABL accredited
Yes, As per IS 10322/Part 5/Section 3 and IS 16107/Part 2/Section 2
/ILAC accredited lab to prove conformity of
the specification
Agreed to furnish all the test reports and
Yes
certificates to buyer on demand
उ पाद का बीआईएस लाइसस|BIS license of the product: 83005452
ईपीबीजी ववरण | ePBG Detail
NA
नयम और शत|Terms and Conditions
1. General Terms and Conditions-
1.1 This contract is governed by the General Terms and Conditions , conditions stipulated to this Product/Service as provided in the Marketplace.
1.2 This Contract between the Seller and the Buyer, is for the supply of the Goods and/ or Services, detailed in the schedule above, in accordance with the General Terms and
Conditions (GTC) unless otherwise superseded by Goods / Services specific Special Terms and Conditions (STC) and/ or BID/Reverse Auction Additional Terms and Conditions
(ATC), as applicable
Signature Not Verified
Digitally Signed.
Name: SAMUEL TOPPO
Date: 20-Dec-2024
नोट: यह स टम जनरेटेड फाइल है। कोई ह ता र क आव यकता नह है। इस द तावेज़ का ंट आउट भुगतान/लेनदे न उ े य के लए मा य नह है। 11:17:22
Note: This is system generated file. No signature is required. Print out of this document is not valid for payment/ transaction purpose.
