RCP/HIL FPGA-Based
Real-Time Simulator
PRODUCT HIGHLIGHTS
• Affordable powerful mid-range simulator.
Introducing OPAL-RT’s mid-range
• A lot of computing power available in a single chassis
real-time simulator: The OP4610XG with Xilinx® Kintex®-7 FPGA and AMD Ryzen™,
6 cores at 3.8 GHz CPU.
The OP4610XG is OPAL-RT’s new compact mid-range
simulator in its XG series and the successor of the popular
OP4510.
• Onboard expansion slots accommodate up to
4 analog and digital I/O modules with signal
OPAL-RT is taking real-time simulation to another level with conditioning to support a combination of up to 64
the new XG series. The new OPAL-RT operating system, fast analog or 128 digital channels.
OPAL-RTLinux 3, combined with latest CPU technologies
and our unique toolboxes, allow engineers to benefit from • Supports up to 4 SFP multi-mode fiber-optic modules
an unmatched performance to simulate, test, integrate and and LVDS/fiber-optic synchronization for high-speed
validate innovative products and solutions. communication and synchronization between devices
and expansion units.
•
The OP4610XG delivers: 2 PCIe expansion slots for adding communication
cards.
Power and Performance • Extensive communication protocol support for
Benefit from parallel processing to perform various industries including IEC61850, C37.118,
high-fidelity real-time electromagnetic DNP3, CAN Bus, MODBUS, EtherCAT, and more.
transient (EMT) simulation of large and
complex systems and an FPGA for high-
frequency power electronics applications.
SIMULATOR ARCHITECTURE
Connectivity
Connect your devices and systems
without limitation, using up to 128 high-
speed digital and analog I/O lines, 4
fiber-optic SFP sockets, and an array of
communication protocols.
Expandability
Easily expand your simulation and I/O
capacity using other OPAL-RT simulators
and expansion units, PCI express of high
speed SFP link with minimal latency.
GENERAL SPECIFICATIONS I/O INTERFACES
AMD Ryzen™ 6 cores, 3.8 GHz or equivalent, 16 Default I/O module configuration suggested*
Computer
GB RAM, 256 GB SSD
32 channels high range digital input output,
® ® 32 Digital I/O Digital out: 50 mA per channel, 5-24 V push-
FPGA Xilinx Kintex -7 410T
(OP5369) pull FET, Digital in: 0-30 V, DIO selectable per
group of 8 channels, 32 static digital.
Software
Platform RT-LAB and HYPERSIM 2x 16 Analog 16 channels analog output, 1 MS/s (16
Compatibility Output channels) or 2 MS/s (8 channels), 16-bit
(OP5330-3) resolution, 15 mA, ±16 V
Toolbox 16 Analog Input 16 channels analog input, 2 MS/s, 16-bit
ARTEMiS, eHS, ePHASORSIM, Orchestra, RT-XSG
Compatibility (OP5342) resolution, 500 ns, ±20 V
High speed
4x SFP socket, 1 to 5 Gbits/s optical fiber * Other I/O modules and configurations are available. For compatible
communication
I/O modules, search “OP5300 Hardware Platforms Compatibility” in
OPAL-RT’s Documentation Hub at [Link]
Dimensions 3U, rackmount, 48.3 (W) x 28.0 (D) x 14 cm (H)
& Weight (19’’ x 11’’ x 5.5’’), 5.5 kg (12 lbs.) approx.
I/O AND CONNECTORS
FRONT VIEW REAR VIEW
A. Small Form Factor (SFP) 5Gbits/s optical E. DB37 connectors for digital and analog inputs and
interface modules connectors outputs
B. JTAG connector (for OPAL-RT technicians’ use) F. RS422 differential inputs/outputs or fiber optic and
C. Synchronization connectors and status LEDs synchronization connectors
D. Target computer status LEDs G. Standard micro ATX computer connectors: 1 VGA
port, 1 serial port, 2 USB 3.2 gen2 ports, HDMI port,
4 network ports (2x 10GbE, 2x 1GbE)
H. 2 PCIe free slot available for optional I/O card: Active/
passive expansion PCIe (copper or optical fiber) to
connect OPAL-RT expansion I/O chassis, CAN Bus
protocol board, GPS time synchronization IEEE 1588
(RJ45 or SFP connectors) or dual-port RJ45 Gigabit
Ethernet.
VISIT THE PRODUCT READ THE PRODUCT
WEB PAGE USER MANUAL
ABOUT OPAL-RT TECHNOLOGIES
OPAL-RT is the world leader in the development of PC/FPGA Based Real-Time Digital
Simulator, Hardware-In-the-Loop (HIL) testing equipment and Rapid Control Prototyping
(RCP) systems to design, test and optimize control and protection systems used in power
grids, power electronics, motor drives, automotive industry, trains, aircraft and various [Link]
industries, as well as R&D centers and universities.
