Turb® 430

PORTABLE TURBIMETER WITH LAB PRECISION

For any
application:
Whether it's about pure water
or reliable product quality,
turbidity is often an ideal
parameter to use in many
applications – and maybe even
in fields you have not thought
of before:

• From water to wine,

• From juice quality to food cleaning
processes,
• From fuel to pharmaceutical,
• From industry to aquaculture.

To fulfill regulations in drinking water

surveillance, two instrument models are
available:
Turb® 430 IR according to DIN EN ISO 7027-1
Turb® 430 T according to US EPA 180.1

Water Waste- Wine Food Livestock/ Pharma- Industry

water Beer Aquaculture ceutical

2
 Results you can trust
We make possible what the scattering properties of water allow:
A highly precise turbidity measurement between 0–1100 FNU/
NTU with automatic switch of measurement range providing the
most technically accurate result possible!

The Turb®430 Series turbidimeters assist you with sophisticated

optics, eliminating uncertainty by means of a light trap and our
IRPC procedure (see below for definition).

Optics with „light trap“: optimized for the elimination of ambient and transmitted
light

A ”stable“ value must be a correct value

Particles in a solution are in motion and thus do not stop for
the measurement. With the Intelligent Reproducibility and
Plausibility Check (IRPC) procedure, quick multiple measurings
with subsequent evaluation and elimination of outliers are
performed.

2 Year
Warranty
IP 67

Measurement with automatic range adaption

The result is ”frozen“ and shown as a stable reading. This way,

IRPC secures correct and repeatable results.

Secure and fast

Cuvettes with optimal measuring path
and long life span due to own indexing

3
Calibration with
AMCO Clear®
AMCO Clear® Standards
Turb® 430 Series is supported by calibration with the proven AMCO Clear® Standards and the measurement
at a scratch-free light transmission through the vial. A calibration kit for 3-point calibration is supplied with the
meter. The following menu-guided calibration functions are available:
• Default 3-point calibration
• Flexible calibration with 2–5 user-defined calibration points
• PharmaCAL
• QuickCAL: 1-point calibration
• Setting of calibration interval
• Storage of calibration protocol

Advantages of AMCO Clear® Standards

AMCO Clear® Standards are made from polymer microspheres
and provide a superior level of accuracy and precision: AMCO Clear®
Kal.Kit 430/750 IR
• Long-term stability without drift (unlike formazine)
• Accurate to 1 % lot-to-lot
• Optimized for the respective optics
• Traceable to formazine
• Environmentally friendly and non-toxic
• Easy-to-use
A successful calibration with AMCO Clear® standards is essential
to obtain precise and reproducible results on the Turb® 430.

Small bench space

requirement
Turb®430 with LabStation
• Ideal for laboratories
• Reliable optics offering labory
precision
• AQA-supported calibration with date
& calibration protocol
• Small dimensions
The LabStation is available as accessory
incl. software LSData and battery pack.
4
Smart and
versatile
• Energy-efficient
• Robust and water proof
• Intuitive handling Important information at
a glance
• Direct access to essential functions
• Storage with sample ID
• Calibration interval and calibration
protocol
• Data filter for data output
• GLP compliant data management
Saving with sample ID

All functions are directly accessable

Fishing in Muddy Waters?

Turb® 430 FIELD SETS — TURBIDITY MEASUREMENT FROM WATER TO WINE

Available as field set

for safe working on site

2 Year
Warranty
IP 67

5
Data management
with Turb® Data
Measured values are stored as data sets
with the associated calibration protocol,
and sample ID.

The data output can be done either via

the free Multilab Importer into Excel,
printer or hyperterminal by pressing the
print key or, more easily, with the supplied
PC software Turb® Data:
• GLP compliant data transfer
• Instrument recognition via serial
number
• User name input
• Output in CSV format
• Data export to Excel
• Data import into LIMS

Data Output for any need

AutoPrint (Automactic value transfer to interface) LIMS

• Directly into PC interface (Data pull)
• Barcode option via PC
• Value comments in XLS/LIMS
Barcode

LIMS

MultiLab-
Auto-Print
Importer XLS

STO Terminal
Program

PRT

Data Storage (meter) Turb® Data

• STOrage key with alphanumeric
sample-ID (No AutoStore) Printer
• PRT key for direct print
• Transfer to Turb® Data (CSV, XLS)

6
Technical Data
Instrument model Turb®430 IR Turb® 430 T
Measuring standards DIN EN ISO 7027-1 US EPA 180.1
Light source Infrared LED White light Tungsten filament lamp
Measuring mode Nephelometric (90° scattered light)
Measuring range 0–1100 FNU/NTU 0–1100 NTU
Units FNU/NTU NTU
Resolution 0.01 the range 0.02 – 9.99
0.1 in the range 10 – 99.99
1 in the range 100 – 1100
Accuracy 0.01 FNU/NTU or ± 2% of reading 0.01 NTU or ± 2% of reading,
Repeatability < 0.5% of reading < 1% of reading
Reading mode Measurement with Intelligent Reproducibility and Plausibility Check (IRPC) procedure,
rapid settlement samples supported by fast response time and IRPC.
Response time 4 sec 7 sec
Calibration – options Default 3 points standard calibration, selectable 2–5 points calibration (FreeCal), 1P -QUICKCal
Calibration protocol and interval setting yes/yes
AQS-Support Calibration protocol, selectable calibration interval
Data storage 2000 data sets with cal protocol,
Sample Identification 3 digit ID number via keypad, optional ID via PC with MultiLab Importer and barcode scaner
Firmware update via RS 232 optional with USB adapter
Interface via RS 232 optional with USB adapter
Storage condition instrument – 25… + 65 °C (13…149 °F)
Operating temperature range + 0 … + 50 °C (32…122 °F)
Data management GLP-compliant PC software LSdata, MutiLab Importer for direct data output, direct LIMS connection
available for programmers on request
Dimensions (H x W x D) ca. 236 x 82 x 170 mm (9.29 x 3.23 x 6.69 inches)
Weight 0.6 kg
Calibration standards Cal.Kit for 3-P standard calibration: long-term stable polymer AMCO® Clear standards,
0.02 – 10.0 –1000 FNU/NTU
Vials, sample volume 28 mm diameter vials, min. volume 15 ml, borosilicate glass, phenolic resin cap, PTFE-coated
rubber seal. No silicon oil required to cover scratches for measurement procedure!
Sample temperature < 70 °C (<158 °F)
Power supply Batteries 4 x 1,5 V, Typ AA, Battery pack (optional), Wide range power supply with plugs for Euro, US,
UK and Australia (optional)
Certificates CE

Ordering Information
Model Description Order No.
Turb 430 IR Portable turbidimeter for nephelometric measurement (90°) acc. DIN EN ISO 7027-1, incl. cali- 600320
bration standard kit (0.02 - 10 - 1000 NTU/FNU) and 5 empty cuvettes
Turb 430 T Portable turbidimeter (90°, tungsten) acc. US EPA 180.1 incl. calibration standard kit (0,02-10- 600325
1000 NTU) and 5 empty cuvettes
Turb 430 IR / SET Portable turbidimeter (90°) with infrared light source according to DIN EN ISO 7027-1 in field 600321
case with table insert, calibration set, empty cuvettes, cleaning cloth, screwdriver, PC software
LSdata and PC connection cable AK 540 B
Turb 430 T / SET Portable turbidimeter (90°) with infrared light source according to US-EPA 180.1 in field case 600326
with table insert, calibration set, empty cuvettes, cleaning cloth, screwdriver, PC software
LSdata and PC connection cable AK 540 B
Turbidity calibration standards
Kal.Kit Turb® 430/750 IR Calibration standards set for Turb® 430 IR, Turb® 750 IR and photoFlex® Turb: 600560
0.02 – 10.0 – 1000 FNU/NTU
Kal.Kit Turb® 430/750 T Calibration standards set for Turb® 430 T and Turb® 750: 0.02 – 10.0 – 1000 NTU 600561
Optional accessories:
LS Flex/430 Labstation with Software LSdata Flex/430 and battery pack RB Flex/430 251301
RB Flex/430 Battery pack 251300
LSdata Flex/430 Software LSdata for GLP-compliant data management 902762

7
Xylem |ˈzīləm|
1) The tissue in plants that brings water upward from the roots;
2) a leading global water technology company.

We’re a global team unified in a common purpose: creating advanced technology

solutions to the world’s water challenges. Developing new technologies that will
improve the way water is used, conserved, and re-used in the future is central to
our work. Our products and services move, treat, analyze, monitor and return water
to the environment, in public utility, industrial, residential and commercial building
services settings. Xylem also provides a leading portfolio of smart metering, network
technologies and advanced analytics solutions for water, electric and gas utilities. In
more than 150 countries, we have strong, long-standing relationships with customers
who know us for our powerful combination of leading product brands and applications
expertise with a strong focus on developing comprehensive, sustainable solutions.

For more information on how Xylem can help you, go to www.xylem.com

North America:
OI Analytical
Phone: +1 979 690-1711
[email protected]
Regional Sales Offices www.oico.com

UK: Asia: Middle East & Africa:

Xylem Analytics UK Limited Xylem Analytics Japan Xylem Analytics Middle East & Africa
Tel +44 1462 673581 Tel +81 (0)44-222-0009 Tel +971 4 806 1000
[email protected] [email protected] [email protected]
www.xylemanalytics.co.uk www.xylem-analytics.jp www.xylemanalytics.com

Australia: China: France:

Xylem Analytics Australia Xylem Analytics (Beijing) Co., Ltd Xylem Analytics France
Tel +61 1300 995362 Tel +86 10 5785 2266 Tel + 33 (0)1 46 95 32 81
[email protected] [email protected] [email protected]
www.xylem-analytics.com.au www.xylemanalytics.cn www.xylemanalytics.com

Visit our website for more contact info

Connect with us:    wtw.wm    wtwgmbhinternational    xylem.analytics.germany

  xylemanalyticsgermany    xylemanalyticsgermany

Xylem Analytics Germany Sales GmbH & Co. KG, WTW

Am Achalaich 11
82362 Weilheim, Germany
Tel +49 881 1830
Fax +49 881 183-420
[email protected]
www.xylemanalytics.com
All names are registered tradenames or trademarks of Xylem Inc. or one of its subsidiaries.
Technical changes reserved.
© 2020 Xylem Analytics Germany Sales GmbH & Co. KG. 999346US November 2023