Scribd
Upload
51 views1 page

Indu-Sol Quality Tester PB-Qone

The PB-QONE is a diagnostic tool for evaluating PROFIBUS communication quality, featuring a non-reactive connection and automated evaluation of network transmission quality. It provides a device matrix for quick assessment of device status and includes advanced analysis options such as telegram mode and a unique topology scan. The device is compact, USB-powered, and comes with necessary accessories for operation.

Uploaded by

Tam Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

Indu-Sol Quality Tester PB-Qone

The PB-QONE is a diagnostic tool for evaluating PROFIBUS communication quality, featuring a non-reactive connection and automated evaluation of network transmission quality. It provides a device matrix for quick assessment of device status and includes advanced analysis options such as telegram mode and a unique topology scan. The device is compact, USB-powered, and comes with necessary accessories for operation.

Uploaded by

Tam Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Diagnostic and service tools PROFIBUS DP/PA

Indu-Sol GmbH – Specialist in Industrial Networks

Quality tester PB-QONE


Function

The PB-QONE is a tool for the complete evaluation of PROFIBUS commu-


nication quality. With the provided adapter a non-reactive connection
to the PROFIBUS network is allowed. Its ease of use and clear and au-
tomated evaluation of measuring results allow to reliably evaluate the
state of the physical and logical transmission quality in the network. In
addition, the PB-QONE offers a powerful topology function.

Results

In this overview, all bus devices are displayed in the form of a device
matrix including address and detailed information. The colouring of each
devices (green, yellow, red) allows to immediately evaluate the state of
each device. Additionally, the results of the bus physics and bus commu-
nication evaluation are clearly displayed.

Quality values

PROFIBUS is based on voltage difference signal which transfers the logi-


cal telegram content to the wires A and B. The level of the voltage diffe-
PB-QONE
rence as well as the shape of these signals are indicators of the physical
transmission quality respectively the signal quality. As result a bar chart
diagram with a quality value for each device in the network is displayed.

Telegram mode

Further analysis possibilities are available in the telegram mode. Through


a number of filter and trigger options the data traffic can be evaluated
based on events or defined data content.

Topology Scan

It is the only tool on the market to offer fully automatic, non-reactive


topology scan performable during a running production. As result the
PB-QONE represents the real wiring of all devices and even identifies
repeaters, measuring points and the cable lengths between the devices.
Quality values
Technical data

• PROFIBUS port: 9 pole D-SUB connector


• USB: USB 2.0 port
• Transmission rate: 9,6 kBit/s to 12 MBit/s
• Power supply: 500mA via USB
• Dimension (H x W x D): 60 x 117 x 35 mm
• Type of Protection: IP20
• Operating temperature: 0 °C to +50 °C
• Storage temperature: -20 °C to +70 °C
• Conformity: CE
Segment Length (m)
Scope of delivery S1 14
S2 10
• PROFIBUS Tester PB-Q ONE

• D-Sub 9-pin adapter cable


• USB cable (3 m) Topology
• CD with operating software “Indu-Sol Suite” and device manual
• Transport case
Ordering details Art. No.

PB-QONE 110010050

Accessories
Updated 11/2018

PROFIBUS PA adapter for PB-QONE 110020110

M12 Y Measuring adapter 110020018

Indu-Sol GmbH • Blumenstrasse 3 • 04626 Schmoelln • Phone: +49 (0) 34491 5818-0 • Fax: +49 (0) 34491 5818-99 • [email protected] • www.indu-sol.com

You might also like