Roof Metal Industries L.L.C.

, manufacturer of
Corrugated Sheets in Insulated and Single Skin for
Warehouses, Roof & Wall Panels, Z-Purlins, Flashings
and Accessories, is dedicated to providing high quality
products and technical support.
Company`s Vision
Teamwork
The commitment to working together towards a shared goal. Contents
RMI building Terminology 2
Customer Satisfaction
The belief that customers are our most important
Profiled Aluminium Sheets 4
consideration and deserve our most concentrated attention.
Profiled Steel Sheet 10
Competitiveness
The recognition that success is never guaranteed and can only Composite Panels 16
be achieved by working hard and working smart.
Accessories 21
Innovation
The realization that a spark or genius properly applied Erection Instruction 22
is the ultimate catalyst for achievement.
Curve Eave Details 23
Quality Fixing Details 24
The knowledge that nothing less than the best is good enough.
Purlin Sleeved System 27

Standard Purlin Details 29

Purlin Loads 30

Color Chart 32

1
RMI BUILDING TERMINOLOGY

2 3
 SPECIFICATION SHEET DATA SHEET
Profiled Aluminium Sheets Aluminium - RM 35/207

Alloy
Aluminium alloy, used in the production of profiled roof and wall cladding panels, is EN AW
APPLICATION
3105 which conforms to BS 3105 Alloy N31, and DIN 1725 Alloy Al Mn 0.50 Mg 0.50
Roof & Wall Sheet

Material Properties
Ultimate Strength: Min 152 N/mm2
Yield Strength: Min 124 N/mm2 1035
30
Modulus of elasticity: 69000 N/mm2 207
Coef. of linear thermal expansion: 24x106- per deg. C.

Fire
Aluminium is classified as a non-combustible material, as defined by BS 476: part 4:1970. 35
Roof coverings of aluminum alloy are rated EXT AA when tested in accordance with BS 100 107 (Nominal Dimensions)
476: part 3: 1958.

Combining With Other Material

These roof coverings can come into direct contact with plastics, galvanized steel, high-
grade and pre-painted steel and zinc sheets.
Direct contact with ordinary steel, copper, brass and lead should be avoided by introducing
a continuous separating element such as PVC tape, or bitumen felt strips or alternatively,
painting with zinc chromate or aluminium paint. This also applies to direct contact with
mortar and concrete.
Timber parts which come into contact with aluminium should be treated with impregnating
agents which do not contain copper salts, mercury salts, phenol compounds or fluorine
compounds.

Finishes
Mill Finish
This is the natural untreated surface of the metal as it leaves the rolling mill.

Polyester Color-Coated
An economical, long-life coating, factory applied polyester on the exposed side, and a
lacquer coating on the reverse side. This is available in RAL as well as BS color shades.

All printed catalogues, data sheets, etc. should not be taken as specifications unless they are confirmed by Roof Metal Industries LLC
in writing. Customers should always get a copy of the mill certificate in order to find out the material available and allocated for the
respective job.
Roof Metal Industries LLC reserves the right to alter any details of specifications without notice.

4 5
 DATA SHEET DATA SHEET
Aluminium - RM 38/200 Aluminium - RM 45/250

APPLICATION APPLICATION
Roof & Wall Sheet Roof & Wall Sheet

1000 1000
30 250 28
200

38 45
95 105 (Nominal Dimensions) 100 150 (Nominal Dimensions)

MI
1000 1250 1500 1750 2000 mm 4/M WEIGHT ZxTOP ZxBOTT.
KG/M2 mm2/M mm2/M
2100 1344 934 686 508 151122 1.67 4743 11506
2625 1650 1167 857 658
2505 1604 1114 818 606 180232 2.00 5659 13705
3133 2005 1392 1023 783
2908 1881 1292 949 702 208977 2.33 6585 15871
3634 2326 1615 1187 909
3304 2115 1469 1079 798 237361 2.66 7460 18004
4130 2643 1836 1349 1038
3695 2366 1643 1207 892 265386 3.00 8346 20104
4620 2957 2054 1509 1155
4084 2614 1815 1333 985 293056 3.33 9220 22173
5105 3267 2269 1667 1278
4845 3101 2154 1582 1167 347340 4.00 10941 26213
6057 3876 2692 1978 1514

6 7
 DATA SHEET DATA SHEET
Aluminium - RM 40/250 Aluminium - RM 45/150

APPLICATION APPLICATION
Roof & Wall Sheet Roof & Wall Sheet

1000 900
250 28 30
150

40 45
120 130 (Nominal Dimensions) 90 60 (Nominal Dimensions)

MI MI
1000 1250 1500 1750 2000 mm 4/M WEIGHT ZxTOP ZxBOTT. 1000 1250 1500 1750 2000 mm 4/M WEIGHT ZxTOP ZxBOTT.
KG/M2 mm2/M mm2/M KG/M2 mm2/M mm2/M
2100 1344 934 686 508 151122 1.67 4743 11506 3325 2128 1476 996 667 198571 1.85 7671 10389
2625 1650 1167 857 658 4156 2660 1847 1357 1039
2505 1604 1114 818 606 180232 2.00 5659 13705 5963 2536 1761 1187 795 236756 2.22 9147 12385
3133 2005 1392 1023 783 4954 3170 2302 1618 1338
2908 1881 1292 949 702 208977 2.33 6585 15871 4593 2939 2041 1376 922 274441 2.59 10605 14353
3634 2326 1615 1187 909 5741 3674 2552 1875 1435
3304 2115 1469 1079 798 237361 2.66 7460 18004 5214 3337 2317 1563 1047 311630 2.96 12044 16294
4130 2643 1836 1349 1038 5518 4171 2897 2128 1629
3695 2366 1643 1207 892 265386 3.00 8346 20104 5527 3729 2590 1747 1170 348329 3.33 13464 18209
4620 2957 2054 1509 1155 7264 4662 3237 2376 1821
4084 2614 1815 1333 985 293056 3.33 9220 22173 6431 4116 2657 1929 1929 384540 3.70 14867 20098
5105 3267 2269 1667 1278 8039 5145 2573 2625 2010
4845 3101 2154 1582 1167 347340 4.00 10941 26213 7615 4874 3355 2285 1531 455519 4.44 17616 23797
6057 3876 2692 1978 1514 9591 6092 4231 3108 2350

8 9
 SPECIFICATION SHEET DATA SHEET
Profiled Steel Sheets Steel - RM 35/207

APPLICATION
Roof & Wall Sheet

1035
30 207
Alloy
The base material shall conform to ASTM A527 (Lock Forming Quality) or structural quality
ASTM A446 Grade D (Yield strength of 345 N/mm2) subject to availability
35
100 107 (Nominal Dimensions)

Finishes
Plain Galvanized
The base steel material shall be not dipped galvanized Zinc coating thickness as per ASTM
A525-G90 (Zinc coating 275g/m2 total both sides) subject to availability.

Paint Finishes
(Applies for galvanized as well as Alu-Zinc).

Polyester

An economical long-life coating. External side coated in 15 - 20 microns polyester and

internal side coated in 5 - 7 microns primer.

All printed catalogues, data sheets, etc. should not be taken as specifications unless they are confirmed by Roof Metal Industries LLC
in writing. Customers should always get a copy of the mill certificate in order to find out the material available and allocated for the
respective job.
Roof Metal Industries LLC reserves the right to alter any details of specifications without notice.

10 11
 DATA SHEET DATA SHEET
Steel - RM 38/200 Steel - RM 40/250

APPLICATION APPLICATION
Roof & Wall Sheet Roof & Wall Sheet

1000 1000
30 250 28
200

38 40
95 105 (Nominal Dimensions) 120 130 (Nominal Dimensions)

4086 2654 1843 1354 1037 807 654 136430 4256 10393
5184 3270 2271 1693 1296 1024 818
4968 3180 2240 1646 1260 981 795 165723 5178 12265
6210 3974 2760 2057 1575 1244 994
5838 3791 2595 1934 1481 1170 984 194650 6290 14107
7298 4671 3290 2384 1851 1462 1185
6270 4071 2786 2077 1567 1256 1018 208977 6520 15017
7837 5088 3483 2596 1958 1570 1272
7125 4560 3165 2360 1781 1428 1158 237361 7418 16814
9806 5782 3953 2950 2259 1786 1448
7970 5175 3594 2640 1993 1597 1294 265386 8306 18581
9963 6376 4492 3253 2491 1996 1594

12 13
 DATA SHEET DATA SHEET
Steel (Decking) - RM 45/150 Steel/RM - 45/250

APPLICATION APPLICATION
Decking, Roof & Wall Sheet Roof & Wall Sheet

900 1000
30 250 28
150

45 45
90 60 (Nominal Dimensions) 100 150 (Nominal Dimensions)

4086 2654 1843 1354 1037 807 654 136430 4256 10393
5184 3270 2271 1693 1296 1024 818
4968 3180 2240 1646 1260 981 795 165723 5178 12265
6210 3974 2760 2057 1575 1244 994
5838 3791 2595 1934 1481 1170 984 194650 6290 14107
7298 4671 3290 2384 1851 1462 1185
6270 4071 2786 2077 1567 1256 1018 208977 6520 15017
7837 5088 3483 2596 1958 1570 1272
7125 4560 3165 2360 1781 1428 1158 237361 7418 16814
9806 5782 3953 2950 2259 1786 1448
7970 5175 3594 2640 1993 1597 1294 265386 8306 18581
9963 6376 4492 3253 2491 1996 1594

14 15
 DATA SHEET DATA SHEET
Composite Panels - RM 35/207 Composite Panels - RM 38/200

APPLICATION APPLICATION
Roof & Wall Sheet Roof & Wall Sheet

1035 1000
207 200
100 107 95 105

35 38
Insulation Insulation
(IT) (IT)

GENERAL FEATURE GENERAL FEATURE

a. Mechanical Characteristic of the foam a. Mechanical Characteristic of the foam
(At Overall Density of 35 - 37 kg/m3) (At Overall Density of 35 - 37 kg/m3)
- Tensile stress : 150 kpa - Tensile stress : 150 kpa
- Compression reistance : 100 kpa - Compression reistance : 100 kpa
- Shear resistance : 100 kpa - Shear resistance : 100 kpa
- Fire property : B3 as per DIN 4102 - Fire property : B3 as per DIN 4102
(B2 upon request) (B2 upon request)
b. Insulation capacity b. Insulation capacity
- K value (Thermal Conductivity of PU) - 0.022 W/mK - K value (Thermal Conductivity of PU) - 0.022 W/mK
- Tolerance + / - 0.002 - Tolerance + / - 0.002

c. Water absorption of the foam c. Water absorption of the foam

- After 24 hours : 1.0% of volume - After 24 hours : 1.0% of volume

16 17
 DATA SHEET DATA SHEET
Composite Panel - RM 45/250 Composite Panel - RM 45/150

APPLICATION APPLICATION
Roof & Wall Sheet Roof & Wall Sheet

1000 900
250 150
100 150 90 100

45 45
Insulation Insulation
(IT) (IT)

GENERAL FEATURE GENERAL FEATURE

a. Mechanical Characteristic of the foam a. Mechanical Characteristic of the foam
(At Overall Density of 35 - 37 kg/m3) (At Overall Density of 35 - 37 kg/m3)
- Tensile stress : 150 kpa - Tensile stress : 150 kpa
- Compression reistance : 100 kpa - Compression reistance : 100 kpa
- Shear resistance : 100 kpa - Shear resistance : 100 kpa
- Fire property : B3 as per DIN 4102 - Fire property : B3 as per DIN 4102
(B2 upon request) (B2 upon request)
b. Insulation capacity b. Insulation capacity
- K value (Thermal Conductivity of PU) - 0.022 W/mK - K value (Thermal Conductivity of PU) - 0.022 W/mK
- Tolerance + / - 0.002 - Tolerance + / - 0.002

c. Water absorption of the foam c. Water absorption of the foam

- After 24 hours : 1.0% of volume - After 24 hours : 1.0% of volume

18 19
 DATA SHEET DATA SHEET
Flat Panel - Tongue and Groove Accessories

Self Drilling & Self Tapping Screws

APPLICATION
Wall Sheet

GENERAL FEATURE
a. Mechanical Characteristic of the foam
(At Overall Density of 35 - 37 kg/m3)
- Tensile stress : 150 kpa
- Compression reistance : 100 kpa
- Shear resistance : 100 kpa
- Fire property : B3 as per DIN 4102
(B2 upon request)
b. Insulation capacity
- K value (Thermal Conductivity of PU) - 0.022 W/mK
- Tolerance + / - 0.002

c. Water absorption of the foam

- After 24 hours : 1.0% of volume

20 21
DATA SHEET DATA SHEET
Erection Details Curved Eave Details

Curved Eaves :
Optional curved eaves are available in lieu of gutters and downspouts, They are available in different
sizes and shapes

22 23
DATA SHEET FLASHING
Fixing Details

24 25
 DATA SHEET
RIDGE
Purlin Sleeved System

26 27
 DATA SHEET DATA SHEET
Purlin Sleeved System Standard Purlin Details

28 29
 DATA SHEET DATA SHEET
Purlin Sizes for Uplift Pressures Purlin Sizes for Gravity Loads

30 31
 DATA SHEET
Color Chart

STANDARD COLOR CHART

32