KRYSTALINE Add
CRYSTALLINE WATERPROOFING ADMIXTURE - DOSAGE 2%
DESCRIPTION APPLICATION GUIDELINES
Krystaline Add is a specially formulated crystalline Concrete is a naturally porous material, with microcracks,
admixture used to waterproof concrete, reduce shrinkage voids, pores and capillaries that are formed mainly in the
cracks, and increase concrete durability. The secondary early stages of curing. The more interconnection between
benefits include set retardation, air entrainment, water these holes, the more permeable the concrete is and the
reduction, lower heat of hydration and increased more prone to damage caused by the entry of water and
compressive strength. corrosive agents. However, Krystaline Add technology
virtually eliminates porosity of the concrete and many of its
Krystaline Add is a true crystalline admixture that inherent weaknesses, which increases durability.
effectively lowers the water/cement ratio by approximately
5% subject to the design mix. Krystaline Add is designed as Krystaline Add is a hydrophilic crystallization technology
a replacement to specified competitive products that that functions using a catalytic process creating a chemical
function based on a percentage of cement content. reaction between the unhydrated cement particles and
water, creating additional insoluble crystalline hydration
which fill the concrete’s capillary network. These crystal
FEATURES & KEY BENEFITS deposits become an integral part of the hydrated paste. The
resulting concrete has a significantly greater ability to
Stop water leaks in concrete autogenously heal cracks and resist the penetration of
Seals and waterproofs cracks up to 0.5 mm water under hydrostatic pressure.
Protects reinforcing steel against corrosion
Total and permanent waterproofing Krystaline Add is a powder admixture that is added to
Waterproofing increases with time concrete at 2% of the cement content of the concrete to a 6
Gives concrete excellent resistance to attack by kg maximum dosage. Krystaline Add reduces water by
sulphates and chloride approximately 5% subject to mix design. Krystaline Add is
Increase mechanical strengths up to 14% compatible with most super-plasticizers, it is recommended
Not affected by surface wear or abrasion to test before mixing.
Effective against hydrostatic pressure up to 12 bar
Waterproofs from any direction (positive or negative Add Krystaline Add directly to the concrete during mixing
side) at any time. However, the addition can affect the plastic
Water vapor permeable properties of concrete. Prior testing is recommended.
Safe for contact with potable water
Replaces unreliable exterior membranes, liners and
coatings DOSAGE
Concrete - 2% of cement content (by weight), up to a
TYPICAL APPLICATIONS maximum of 6 kg/m³
Shotcrete - 5 kg/m³
Foundations Mortar - 2% of cement content
Basement
Tunnels STORAGE
Pipes
Maritime projects Krystaline Add should be stored at room temperature (min
Submarine works 5°C and max 35°C), kept dry and out of direct sunlight. If
Elevator pits these conditions are maintained and the product packaging
Concrete walls is unopened, then a shelf life of 2 years can be expected.
Concrete slabs
Construction joints
Marine structures PACKAGING
Swimming pools
Water treatment plants Krystaline Add is available in 18 kg pails with 18 x 1 kg
Channels soluble bags for easy dosage or in 20 kg pails without
Potable water tanks soluble bags.
Parking structures
HEALTH & SAFETY
This product becomes caustic when mixed with water or
perspiration.
Krystaline Add should only be used as directed. We
always recommend that the Health & Safety Data Sheet is
carefully read prior to application of the material. Our
recommendations for protective equipment should be
strictly adhered to for your personal protection.
KRYSTALINE TECHNOLOGY, S.A. - C/ Alfred Nobel 18, 03203, Elche (Alicante) Spain
TEL: (+34) 966 443 062 - krystalinetechnology.com - [email protected]
KRYSTALINE Add
CRYSTALLINE WATERPROOFING ADMIXTURE - DOSAGE 2%
TECHNICAL DATA DISCLAIMER
Color Grey Whilst any information and/or specification contained
Appearance Powder herein is to the best of our knowledge, true and accurate,
Density 1.2 g/cm³ we always recommend that a trial be carried out to confirm
Particle size 40-150 microns suitability of the product, as no warranty is given or implied
pH (Mixed with water) 13 in connection with any recommendations or suggestions
Solids content 100% made by us or our representatives, agents or distributors.
Hydrostatic resistance 12 bar The information in this data sheet is effective from the date
Typical dosage 2% by wt. cement shown and supersedes all previous. Please check with your
office to confirm that this is current issue: (May of 2019).
Crack self-sealing 0.5 mm
KRYSTALINE TECHNOLOGY, S.A. - C/ Alfred Nobel 18, 03203, Elche (Alicante) Spain
TEL: (+34) 966 443 062 - krystalinetechnology.com - [email protected]
