SHAPER CUTTERS & SETS

Note: Machine safety guards have been removed for photo clarity.

Note: Machine safety guards have been removed for photo clarity.

137
SHAPER CUTTERS & SETS
SHAPER CUTTERS
CARBIDE-TIPPED SHAPER CORNER ROUND/COVE
CUTTERS 3/4" Bore with 1/2" Bushings
3-Wing / for 1/2" & 3/4" Arbor Shapers
D
Over 100 different cutters for all your shaping needs. d
Extra-thick carbide tips offer many resharpenings and R1
longer tool life. RPM rating: 12,000 and under.

B
All cutters furnished with 3/4" bore and two removable 1/2" x 3/4"
‘T’-bushings, unless stated otherwise.
R2

D1
STRAIGHT EDGE
3/4" Bore with 1/2" Bushings
D
d

Tool No. Description D D1 B R1 R2 d

Tool No. D B d 950 Corner round 2-5/8 2 15/16 1/2 5/16 1/2 & 3/4
**917 3-1/8 1/4 1/2 & 3/4 & cove
*918 2-5/8 1/4 1/2 & 3/4
*953 2-5/8 3/8 1/2 & 3/4 D
W 948 2-1/2 1/2 1/2 & 3/4
NE d
954 2-5/8 1/2 1/2 & 3/4
R1
912 2-5/8 3/4 1/2 & 3/4
955 2-5/8 1 1/2 & 3/4
956 2-5/8 1-1/2 1/2 & 3/4
B
R2
CORNER ROUND
3/4" Bore with 1/2" Bushings
D
d
R1

R2

D1
Tool No. Description D B R1 R2 d
951 Cove & bead 2-5/8 1 3/8 5/16 1/2 & 3/4

Replacement ‘T’-bushing(s) #BU-550

Tool No. Description D D1 B R1 R2 d *Due to size, furnished with only one 1/2" x 3/4" bushing.
905 Corner round 2-5/8 1-5/8 15/16 1/4 1/2 1/2 & 3/4 **Cabinet set replacement cutter, no bushing is furnished.

Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
138
 SHAPER CUTTERS & SETS
SHAPER CUTTERS
CORNER ROUND/BEAD BULLNOSE
3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" BushingS
D1
D1
D
D
d
d

R1
B1 B
R
B
R2

R3

Tool No. Description D D1 B B1 R d

*973 1/4 bead 2-5/8 2-3/8 1/4 9/16 1/8 1/2 & 3/4
974 3/8 bead 2-5/8 2-1/4 3/8 5/8 3/16 1/2 & 3/4
925 1/2 bead 2-5/8 2-1/8 1/2 13/16 1/4 1/2 & 3/4
927 3/4 bead 2-5/8 1-7/8 3/4 1-1/16 3/8 1/2 & 3/4
929 1 bead 2-5/8 1-5/8 1 1-1/2 1/2 1/2 & 3/4

STAIR TREAD
3/4" Bore with 1/2" Bushings
Tool No. Description D D1 B R1 R2 R3 d
D1
952 Corner round 2-5/8 1-7/8 15/16 3/8 1/8 1/8 1/2 & 3/4
& bead D
d
CORNER ROUND
3/4" Bore with 1/2" Bushings

D
B1 B R
d

R
B

D1

Tool No. Description D D1 B B1 R d

932 Stair tread 3-3/8 1-7/8 1-1/8 1-1/2 9/16 1/2 & 3/4
nosing
Tool No. Description D D1 B R d
959 Corner round 3-5/8 2-1/8 1 3/4 1/2 & 3/4
Replacement ‘T’-bushing(s) #BU-550
*Due to size, furnished with only one 1/2" x 3/4" bushing.
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
139
SHAPER CUTTERS & SETS
SHAPER CUTTERS
FLUTE (CONVEX) CROWN MOLDING
3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" Bushings
D
D
d
d

a°
B R
R2
a°
B
R1

a°

Tool No. Description D B R d

*971 Flute 2-5/8 1/4 1/8 1/2 & 3/4 Tool No. Description D B a° R1 R2 R3 d
*972 Flute 2-5/8 3/8 3/16 1/2 & 3/4 962 Crown Molding 2-3/4 2-1/4 45° 1/2 3/16 — 1/2 & 3/4
926 Flute 2-5/8 1/2 1/4 1/2 & 3/4
928 Flute 2-5/8 3/4 3/8 1/2 & 3/4
930 Flute 2-5/8 1 1/2 1/2 & 3/4
MULTI-FORM
OGEE PATTERNS 3/4" Bore with 1/2" Bushings
3/4" Bore with 1/2" Bushings D
D2
D d
R3
d
R2

B B
B1 R1
R2
R2
R1

Tool No. Description D D2 B R1 R2 R3 d

965 Multi-form 3-1/2 2-7/8 1-7/8 1/4 5/16 3/8 1/2 & 3/4

Tool No. Description D B B1 R1 R2 d

906 Ogee 2-5/8 3/4 1/2 1/4 1/4 1/2 & 3/4
MOLDING
D
3/4" Bore with 1/2" Bushings
d
D
R3 d
R1 R2
B
B1
R2

B
R2
D1
R1

Tool No. Description D B R1 R2 R3 d

966 Molding 3 1-3/4 1/8 5/32 1/4 1/2 & 3/4
Tool No. Description D D1 B B1 R1 R2 d
958 Ogee & bead 3-1/4 2-1/8 1 3/4 1/8 1/2 1/2 & 3/4
table edge
Replacement ‘T’ bushing(s) #BU-550.
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
140
 SHAPER CUTTERS & SETS
SHAPER CUTTERS
CROWN MOLDING JOINERY CUTTERS
3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" Bushings
D
d
D
D2
d
B B1

R
B

D1
a°

Tool No. Description D D2 B a° R1 d

967 Crown molding 3-1/4 — 2-1/4 45° 1-1/4 1/2 & 3/4
Tool No. Description D D1 B B1 d
903 Wedge tongue 2-5/8 2 15/16 11/32 1/2 & 3/4

RAISED PANEL BACK CUTTER D

d
3/4" Bore with 1/2" Bushings
With Ball Bearing Rub Collar

B B1
D
R d

D1

Tool No. Description D B R d

980 Back cutter 3-1/2 1/2 1/4 1/2 & 3/4 Tool No. Description D D1 B B1 d
904 Wedge groove 2-5/8 2 15/16 11/32 1/2 & 3/4
D1
WINDOW SASH D
d
3/4" Bore with 1/2" Bushings
With Ball Bearing Rub Collar
D
d B B1

B3

B
B1 R

B2

B1

Tool No. Description D D1 B B1 d

Tool No. Description D B B1 B2 B3 R d
911 Glue joint 2-5/8 2-1/4 1-3/16 3/8 1/2 & 3/4
939 Window Sash 2 1-5/8 5/16 3/8 5/8 1/4 1/2 & 3/4

Replacement ‘T’ bushing(s) #BU-550.

Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
141
SHAPER CUTTERS & SETS
SHAPER CUTTERS
JOINERY CUTTERS (CONT’D) JOINERY CUTTERS (CONT’D)
3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" Bushings
D1
D D
d d

B R

D1 B1
Tool #975

D
d
R
B
L
Tool No. Description D D1 B B1 L d
999 Finger joint 2-7/8 2-1/8 1-1/2 11/32 3/8 1/2 & 3/4

D1
D
Tool #976 d

Tool No. Description D D1 B R d B B1

975 Female sash 2-5/8 2-1/8 5/8 1/8 1/2 & 3/4
976 Male sash 2-5/8 2-1/8 5/8 1/8 1/2 & 3/4

D1
D
d

Tool No. Description D D1 B B1 d

B 933 Drawer joint 2-5/8 2-3/8 3/4 11/32 1/2 & 3/4
B1
DOOR LIP
3/4" Bore with 1/2" Bushings
D
a° a° d

B1
B
R

D1

Tool No. Description D D1 B B1 R a° d

Tool No. Description D D1 B B1 a° d 900 Corner round 2-5/8 1-3/4 1-3/16 5/8 3/8 10° 1/2 & 3/4
998 Lock miter 3-3/4 2 1 3/8 45° 1/2 & 3/4 & rabbet (counter-clockwise, rabbet up)
Replacement ‘T’ bushing(s) #BU-550.
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
142
 SHAPER CUTTERS & SETS
SHAPER CUTTERS
DOOR LIP (CONT’D) DOOR LIP (CONT’D)

3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" Bushings
D D
d d

R
B
B
B1

a°

D1
D1

Tool No. Description D D1 B d

Tool No. Description D D1 B B1 R a° d 993 Ogee & Cove 2-5/8 1-1/2 1 1/2 & 3/4
901 Corner round 2-5/8 1-3/4 1-1/4 11/16 3/8 10° 1/2 & 3/4
& taper rabbet (counter-clockwise, rabbet down) 90° ‘V’ GROOVE
D 3/4" Bore with 1/2" bushings
D1 D
d d
a°

R
B B

B1

a°

Tool No. Description D B a° d

957 90° ‘V’ Groove 2-5/8 15/16 45° 1/2 & 3/4

Tool No. Description D D1 B B1 R a° d 30° BEVEL

991 Corner round 2-5/8 2 1 7/16 1/8 10° 1/2 & 3/4 3/4" Bore with 1/2" bushings
& taper rabbet (counter-clockwise, rabbet down) D
D1
D d
D1
d
a°
B
B
B1

Tool No. Description D D1 B B1 d Tool No. Description D D1 B a° d

992 Corner Round 2-5/8 2-1/4 1 13/16 1/2 & 3/4 977 30° Bevel 2-5/8 1-3/8 1 30° 1/2 & 3/4
and Ogee
Replacement ‘T’ bushing(s) #BU-550.
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150. 143
SHAPER CUTTERS & SETS
SHAPER CUTTERS
CLASSICAL TRIPLE FLUTE
3/4" Bore with 1/2" Bushings 3/4" Bore with 1/2" Bushings
D
d D
d

B B1 R

D1

Tool No. D D1 B d
964 2-5/8 2 1 1/2 & 3/4

COVE & BEAD

3/4" Bore with 1/2" Bushings Tool No. D B B1 R d
D 960 2-5/8 1 5/8 5/64 1/2 & 3/4
d

B B1 R TRIPLE BEAD
R
3/4" Bore with 1/2" Bushings
D
D1 d

B B1 R

Tool No. D D1 B B1 R d
968 3 1-3/4 3/4 1/2 15/64 1/2 & 3/4

OGEE
3/4" Bore with 1/2" Bushings
D
d

B B1
R
Tool No. D B B1 R d
961 2-5/8 1 5/8 5/64 1/2 & 3/4

D1

Replacement ‘T’ bushing(s) #BU-550.

Tool No. D D1 B B1 R d For rub collars & ‘T’ bushings, please see page 150.
969 3-1/4 1-3/4 7/8 3/8 1/2 1/2 & 3/4
Products shown in Bold indicate most popular items.
144
 SHAPER CUTTERS & SETS
SHAPER CUTTERS
HORIZONTAL PANEL RAISING / SHEAR FACE
1-1/4" Bore with 1" Bushings
D
*A d

TRADITIONAL B1
B

R a°

Actual Size 931 Tool No. D B B1 R *A a° d

Counter-clockwise rotation: Wood face-up 931 5-1/2 5/8 3/8 5/32 1-1/2 5° 1 & 1-1/4

D
*A d

B1
TRADITIONAL B

a°

Tool No. D B B1 R *A a° d
Actual Size 984
984 5-1/2 5/8 5/16 — 1-1/2 15° 1 & 1-1/4

D
*A d

B1
B
OGEE

Tool No. D B B1 R *A a° d
Actual Size 985 985 5-1/2 11/16 9/32 3/4 1-1/2 — 1 & 1-1/4

D
*A d

B1
CLASSICAL B
a°
R

Tool No. D B B1 R *A a° d
Actual Size 986
986 5-1/2 11/16 11/32 1/8 1-1/2 12° 1 & 1-1/4

D
*A d

B1
COVE B

Tool No. D B B1 R *A a° d
Actual Size 987
987 5-1/2 11/16 7/32 1-9/16 1-1/2 — 1 & 1-1/4

*NOTE: Reveal (*‘A’) shown on all above tools reflects the total length of cut. Therefore, you must deduct (usually 3/8") for allowing the
panel to recess into the frame.
Replacement ‘T’ bushings #BU-720 (2 required).
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
145
SHAPER CUTTERS & SETS
SHAPER CUTTERS
VERTICAL PANEL RAISING / SHEAR FACE
3/4" Bore with 1/2" Bushings
D
B d
R
TRADITIONAL
Tool No. D B R *A a° d
902 2-5/8 9/16 5/32 1-1/2 5° 1/2 & 3/4 *A

Actual Size 902

a°

D
B d
B1
TRADITIONAL Tool No. D B B1 R *A a° d
a°
984-VC 3-1/2 5/8 5/16 — 1-5/8 15° 1/2 & 3/4
*A

Actual Size 984-VC

D
B d
B1
OGEE Tool No. D B B1 R *A a° d R
985-VC 3-1/2 21/32 9/32 3/4 1-5/8 — 1/2 & 3/4
*A

Actual Size 985-VC

D
B d
B1
CLASSICAL a°
R
Tool No. D B B1 R *A a° d
986-VC 3-1/2 19/32 3/16 1/8 1-5/8 12° 1/2 & 3/4
*A

Actual Size 986-VC

D
B d
B1
COVE R
Tool No. D B B1 R *A a° d
987-VC 3-1/2 5/8 1/4 1-9/16 1-5/8 — 1/2 & 3/4
*A

Actual Size 987-VC

*NOTE: Reveal (*‘A’) shown on all above tools reflects the total length of cut. Therefore, you must deduct (usually 3/8") for allowing the
panel to recess into the frame.
Replacement ‘T’ bushings #BU-550 (2 required).
Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
146
 SHAPER CUTTERS & SETS
SHAPER CUTTER SETS
CABINET SETS
3/4" Bore with 1/2" Bushings • 3-Wing
#921
CABINET MOLDING SET
with 1/4"W x 3/8"D Tongue & Groove
d

R2 914
909
R1 Includes:
918 919
R1 B B1 909 Cabinet R.H. female
910 913 910 Cabinet L.H. female
R2
913 Cabinet R.H. male
D1 914 Cabinet L.H. male
D 918 1/4" Straight
D1 919 Steel spacer
D
BU-550 ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
Tool No. D D1 B B1 R1 R2 d BU-900 Sleeve bushing, 1/2" x 3/4" x 1/2" long
921 2-5/8 1-7/8 1-7/8 1 1/8 5/32 1/2 & 3/4 BU-930 Sleeve bushing, 1/2" x 3/4" x 1-1/8" long

#922
COVE & BEAD SET
with 1/4"W x 3/8"D Tongue & Groove

916
908
R2
917 R1 919
B
907 R1
R2 915

Includes:
D1 907 Cove & bead molding L.H.
D3 D2 908 Cove & bead molding R.H.
D 915 Cove & bead cope L.H.
916 Cove & bead cope R.H.
917 1/4" straight
919 Steel spacer
Tool No. D D1 D2 D3 B R1 R2 d BU-550 ‘T’ bushings, 1/2" x 3/4" (4 pcs.)
922 3-1/8 1-7/8 2-5/16 2-1/8 1-7/8 3/16 5/16 1/2 & 3/4 BU-920 Sleeve bushing, 1/2" x 3/4" x 1-1/16" long (2 pcs.)

#940
CONCAVE STILE & RAIL SET
with 1/4"W x 3/8"D Tongue & Groove
d
R
941
942

919 917
B
948
948
Includes:
941 Concave stile
d1 D 942 Rail for concave stile
D D1 948 1/2" straight (2 pcs.)
917 1/4" straight
919 Steel spacer
Tool No. D d1 D1 B R d BU-550 ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
940 2-1/2 1-7/8 3-1/8 1-5/16 9/32 1/2 & 3/4 BU-910 Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)

Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
147
SHAPER CUTTERS & SETS
SHAPER CUTTER SETS
CABINET SETS (CONT’D)
3/4" Bore with 1/2" Bushings • 3-Wing
#945
CONVEX STILE & RAIL SET
with 1/4"W x 3/8"D Tongue & Groove

d
R 946
947 Includes:
919 917 946 Convex stile
B
948 948 947 Rail for convex stile
948 1/2" straight (2 pcs.)
917 1/4" straight
D1 D2
919 Steel spacer
D2 D BU-550 ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
BU-910 Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)
Tool No. D D1 D2 B R d
945 3-1/8 1-7/8 2-1/2 1-3/8 5/16 1/2 & 3/4

#994
Ogee STILE & RAIL SET
with 1/4"W x 3/8"D Tongue & Groove

d
R2
996 R1 995

919 917
B
948 948
Includes:
948 1/2" straight (2 pcs.)
D1 D2 917 1/4" straight
D2 D 919 Steel spacer
995 Ogee stile
996 Rail for ogee stile
Tool No. D D1 D2 B R1 R2 d BU-550 ‘T’ bushing, 1/2" x 3/4" (4 pcs.)
994 3-1/8 1-7/8 2-1/2 1-5/16 3/16 5/32 1/2 & 3/4 BU-910 Sleeve bushing, 1/2" x 3/4" x 3/4" long (2 pcs.)

#938
‘V’-PANELING
2 Piece Set
with 1/4"W x 3/8"D Tongue & Groove

a˚
B

D2 D1
D1 D
D

Tool No. D D1 D2 B a° d
938 2-5/8 2-1/4 1-1/2 29/32 45° 1/2 & 3/4

Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
148
 SHAPER CUTTERS & SETS
SHAPER CUTTERS
REVERSIBLE STILE & RAIL COVE & BEAD
3-1/2" and 4-1/2" diameter with
3/16"W and 3/8"D tongue & groove
stock thickness • 7/8" through 1" D
d

OGEE
B1
B
R
D B1
d

B1 D1
B
R
B1

D1

Tool No. D D1 B B1 R d
936 3-1/2 2-1/2 1-1/2 1 3/16 1/2 & 3/4
A-32-300 4-1/2 3-1/2 1-1/2 1 3/16 1-1/4

Tool No. D D1 B B1 R d
934 3-1/2 2-1/2 1-1/2 1 1/8 1/2 & 3/4
A-32-100 4-1/2 3-1/2 1-1/2 1 1/8 1-1/4
TRADITIONAL
D
D d
d

B1
B1
B a°
B
R B1
B1

D1
D1

Tool No. D D1 B B1 R d Tool No. D D1 B B1 R a° d

935 3-1/2 2-1/2 1-1/2 1 1/4 1/2 & 3/4 937 3-1/2 2-1/2 1-1/2 1 — 30˚ 1/2 & 3/4
A-32-200 4-1/2 3-1/2 1-1/2 1 1/4 1-1/4 A-32-400 4-1/2 3-1/2 1-1/2 1 — 30˚ 1-1/4

Products shown in Bold indicate most popular items. For rub collars & ‘T’ bushings, please see page 150.
149
SHAPER CUTTERS & SETS
SHAPER CUTTERS & ACCESSORIES
HEAVY-DUTY CARBIDE-TIPPED SHAPER CUTTERS
3 Wing • 1-1/4" Bore
STRAIGHT EDGE BEAD (BULLNOSE)
1-1/4" Bore 1-1/4" Bore
d
d D1

Tool No. B D d
A-27-100 1/4 4 1-1/4
A-27-102 3/8 4 1-1/4 R B
A-27-104 1/2 4 1-1/4
B
A-27-106 3/4 4 1-1/4
A-27-108 1 4 1-1/4 D
A-27-110 1-1/4 4 1-1/4 Tool No. R B D D1 d
D A-27-112 1-1/2 4 1-1/4 A-29-100 1/8 1/2 4 3-3/4 1-1/4
A-27-114 1-3/4 4 1-1/4 A-29-102 3/16 5/8 4 3-5/8 1-1/4
A-27-116 2 4 1-1/4 A-29-104 1/4 13/16 4 3-1/2 1-1/4
A-29-106 3/8 1-3/16 4 3-1/4 1-1/4
A-29-108 1/2 1-5/16 4 3 1-1/4
FLUTE (CONVEX)
1-1/4" Bore SHAPER CUTTER ‘T’ BUSHINGS
(With Flange)
d
'C'

'A' 'B'
Tool No. R B D d
A-28-100 1/8 1/4 4 1-1/4
R B A-28-102 3/16 3/8 4 1-1/4 'd'

D A-28-104 1/4 1/2 4 1-1/4 Each item number consists of

'D'
A-28-106 3/8 3/4 4 1-1/4 one of each.
A-28-108 1/2 1 4 1-1/4 Order # d D A B C
BU-550 1/2 3/4 1/4 11/32 1
CORNER ROUND BU-600 3/4 1-1/4 1/4 15/32 1-3/4
1-1/4" Bore BU-700 1 1-1/4 3/16 9/32 1-3/4
BU-720 1 1-1/4 1/4 11/32 1-3/4
d BU-750 1 1-1/4 11/32 1/2 1-3/4
D1
BU-800 1 1-1/4 1-5/32 1-9/32 1-3/4
R
BALL BEARING RUB COLLARS
B Tool No. R B D D1 d
A-30-100 1/8 3/8 4 3-3/4 1-1/4 FOR 1/2" & 3/4" DIAMETER SPINDLES`
A-30-102 3/16 7/16 4 3-5/8 1-1/4 Designed for template shaping such as arched or
D A-30-104 1/4 1/2 4 3-1/2 1-1/4 cathedral doors, etc. Features a ball bearing center with a
Counter-clockwise rotation: A-30-106 5/16 9/16 4 3-3/8 1-1/4 steel sleeve and is available with either 1/2" or 3/4" inside
Wood face-down A-30-108 3/8 5/8 4 3-1/4 1-1/4 diameter. Please see page 154. for additional rub collars.
A-30-110 1/2 3/4 4 3 1-1/4
A-30-112 5/8 7/8 4 2-3/4 1-1/4
Tool No. d D B
A-30-114 3/4 1 4 2-1/2 1-1/4
47800 1/2 1-1/8 .315 (5/16)
A-30-116 1 1-1/4 4-1/2 2-1/2 1-1/4
47802 1/2 1-1/4 .315 (5/16)
A-30-118 1-1/4 1-1/2 5 2-1/2 1-1/4
47804 1/2 1-3/8 .315 (5/16)
A-30-120 1-1/2 1-3/4 5-1/2 2-1/2 1-1/4
47806 1/2 1-1/2 .315 (5/16)
SHAPER CUTTER CABINET SET * 47808 3/4 1-5/8 .437 (7/16)
* 47810 3/4 1-11/16 .437 (7/16)
SLEEVE BUSHINGS * 47812 3/4 1-3/4 .437 (7/16)
(Without Flange) * 47814 3/4 1-7/8 .437 (7/16)
'D' * 47816 3/4 2 .437 (7/16)
'd' * 47818 3/4 2-1/8 .437 (7/16)
Order # d D B * 47820 3/4 2-3/16 .437 (7/16)
BU-900 1/2 3/4 1/2
NEW * 47821 3/4 2-1/2 .437 (7/16)
BU-910 1/2 3/4 3/4 * 47822 3/4 2-5/8 .437 (7/16)
BU-920 1/2 3/4 1-1/16 * 47824 3/4 2-15/16 .437 (7/16)
'B' BU-930 1/2 3/4 1-1/8
For Cabinet Sets #921, 922, 940, 945 &
994 see page 147.
Products shown in Bold indicate most popular items. *Includes 2 steel shims .007" (55358)
150
 SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS

TM

P R O F I L E P R O
Note: Machine safety guards have been removed for photo clarity.
SHAPER CUTTERS
The Profile Pro™ Universal Shaper Cutter System from Amana Tool®.
Designed for professionals, the Profile Pro™ features over 135 different
interchangeable steel knife patterns, ranging from molding to joinery to door
sets, which can all be used with a single cutterhead. Blank (unground) knives
are also available for custom patterns.

The Profile Pro™ features a unique system of fixed steel pins (A), screws
(B) and a wedge block (C) that simultaneously indexes and secures the knives
B C (D) to the head (E). This enables fast, accurate
D set-ups and eliminates the tedious task of adjusting
E
the knives. This type of system also offers greater
A safety over other types of cutterheads. Above: Aluminum-alloy
Profile Pro™ shaper head
The Profile Pro™ cutterheads are 100mm and
120mm black-oxide finished solid steel or 88mm,
100mm and 120mm blue-anodized lightweight aluminum alloy. The steel cutterheads
are recommended for heavy-duty type shapers with 3 horsepower or more. The
aluminum heads, which are 60% less weight than their steel counterparts, are
recommended for all spindle shapers, especially smaller machines with 2 horsepower
or less.

When selecting the diameter, choose a cutterhead that will properly fit
within the table insert rings of your shaper. The diameters shown are for
the head only, so you must add from 14mm to 38mm to the diameter to
allow for the knives. (Example: Cutterhead #61100 or SCS-1000 (88mm)
with #64F000 straight knives (add 14mm) = 102mm total outside diameter.)

Each Profile Pro™ shaper cutter head includes one pair of #64F000
straight knives. See next page for specially priced introductory sets with
seven different knife patterns and custom hardwood storage box.
See pages 159 to 171 for replaceable carbide shaper cutterheads for joinery, Above: Solid steel
raised panels, stile and rail, etc. Profile Pro™ shaper head

151
SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
All sets include the basic 88mm diameter aluminum
Profile ProTM alloy cutterhead and seven pairs of interchangeable profile
Multi-Shaper knives. Also included is a custom hardwood storage box,
hex key and color poster showing many of the different
Starter Sets available knife profiles. Look over the following pages for a
full line of aluminum and steel cutterheads in 3/4", 1", 1-1/4"
and 30mm bores, a wide array of additional knives,
T-bushings for 1/2" and 3/4" diameter arbors, and empty
hardwood storage boxes.

RPM
Set No. D B d Ideal/max.
W * SCS-1106 68mm 40mm (1-1/2") 3/4"-1/2" 7000/9000
NE SCS-1000 88mm (3-1/2") 40mm (1-1/2") 1" 7000/9000
SCS-1002 88mm (3-1/2") 40mm (1-1/2") 30mm 7000/9000
SCS-1004 88mm (3-1/2") 40mm (1-1/2") 1-1/4" 7000/9000

RPM
Set No. D B d Ideal/max.
* SCS-1108 68mm 40mm (1-1/2") 3/4"-1/2" 7000/9000
NEW SCS-1100 88mm (3-1/2") 40mm (1-1/2") 30mm 7000/9000
SCS-1102 88mm (3-1/2") 40mm (1-1/2") 1" 7000/9000
SCS-1104 88mm (3-1/2") 40mm (1-1/2") 1-1/4" 7000/9000

Replacement Parts:
D
Order Qty.
d
No. Description Size Required
WB-40 Wedge blocks For 40MM knives 2
B 67144 Allen socket screws 8x16MM 4
5010 ‘L’ shaped allen key 4MM 1
62282 Wood storage box For 6 pair of knives 1
*Includes 2 Bushings (BU-561) 3/4"-1/2"
. BU-561 Bushing 3/4"-1/2" 2

The following 40mm knives are included in each set:

SCS-1000/1002/1004/1106

#64F000 #64F001 #64F002 #64F003 #64F004 #64F005 #64F006

SCS-1100/1102/1104/1108

#64F000 #64F001 #64F016 #64F017 #64F096 #64F098 #64F099

Knives shown at approx. 50% of actual size. See pages 154-158 for full selection of knives.

Products shown in Bold indicate most popular items.

152
 SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
ALUMINUM CUTTERHEADS
Profile Pro™ blue anodized aluminum alloy cutterheads in 68, 88, 100 or 120mm diameters.
RPM
Tool No. D B d Ideal/Max.

NEW
* 61068 68mm 40mm (1-1/2") 3/4" 7000/9000
61100 88mm (3-1/2") 40mm (1-1/2") 30mm 7000/9000
61102 88mm (3-1/2") 40mm (1-1/2") 1" 7000/9000
61104 88mm (3-1/2") 40mm (1-1/2") 1-1/4" 7000/9000
D 61200 100mm (4") 40mm (1-1/2") 1" 5800/9000
d
61204 100mm (4") 40mm (1-1/2") 30mm 5800/9000
61208 100mm (4") 40mm (1-1/2") 1-1/4" 5800/9000
B 61228 120mm (4-3/4") 40mm (1-1/2") 1" 5100/7900
61232 120mm (4-3/4") 40mm (1-1/2") 30mm 5100/7900
61236 120mm (4-3/4") 40mm (1-1/2") 1-1/4" 5100/7900
*Includes 2 Bushings (BU-561) 3/4"-1/2".
See below for reducing ‘T’ bushings.

STEEL CUTTERHEADS
Profile Pro™ black oxide solid RPM
steel cutterheads in 100 or Tool No. D B d Ideal/Max.
120mm diameters 61212 100mm (4") 40mm (1-1/2") 1" 5800/9000
61216 100mm (4") 40mm (1-1/2") 30mm 5800/9000
61220 100mm (4") 40mm (1-1/2") 1-1/4" 5800/9000
61240 120mm (4-3/4") 40mm (1-1/2") 1" 5100/7900
61244 120mm (4-3/4") 40mm (1-1/2") 30mm 5100/7900
61248 120mm (4-3/4") 40mm (1-1/2") 1-1/4" 5100/7900

D
d
Replacement Parts:
Qty.
Order No. Description Size Required
67144 Allen socket screws 8x16MM 4
B
WB-40 Wedge blocks For 40MM knives 2
5010 ‘L’ shaped allen key 4MM 1
See below for reducing ‘T’ bushings.

STEEL ‘T’ BUSHINGS

Order No. d D A B C
BLACK OXIDE FINISH, BU-560 1" 30mm 5mm 9mm 55mm

2 REQUIRED PER CUTTER N EW BU-561 1/2" 3/4" 5mm 9mm 30mm

BU-562 3/4" 30mm 5mm 9mm 55mm
BU-564 3/4" 1" 5mm 9mm 55mm
'C' BU-565 1/2" 1" 5mm 9mm 55mm
BU-566 30mm 1-1/4" 5mm 9mm 55mm
'A' 'B'
BU-568 1" 1-1/4" 5mm 9mm 55mm
'd'
BU-570 3/4" 1-1/4" 5mm 9mm 55mm
'D'

HARDWOOD STORAGE BOXES

Beautifully made custom hardwood storage boxes will accommodate either
6, 12, 24 or 36 pairs of 40mm knives along with one Profile-Pro™ cutterhead.
Order knives and cutterhead separately. No. 62288 is shown at left.

Max. Head
Order No. Description Dia.
62282 Empty hardwood box for 6 pr. 40mm knives 100mm
62284 Empty hardwood box for 12 pr. 40mm knives 120mm
62286 Empty hardwood box for 24 pr. 40mm knives 120mm
62288 Empty hardwood box for 36 pr. 40mm knives 120mm

Products shown in Bold indicate most popular items.

153
SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
BALL BEARING RUB COLLARS 40MM STEEL KNIVES (CONT’D)
FOR 3/4", 1", 1-1/4" & 30MM SPINDLE SHAPERS
R10
Designed for template shaping such as arched
R12
or cathedral doors, etc. Features a steel ball bearing center
R8 R12
and interchangeable, lightweight aluminum rub collar
sleeves. To order, specify rub collar (example: #61600, #64F004 #64F005
75MM), and then order the correct size bearing to fit your
spindle. The bearing includes a special steel retaining collar R3
that properly secures the assembly to your spindle (3/4", 1", R5
R4.5
1-1/4" or 30MM). R5 R4.5
R5
R4.5
Collar
w/ball #64F006 #64F007
bearing
inside

R20
R40
d
R20
B
Retainer #64F008 #64F009
D

R5
Order No. Order No. R6
(Rub collar (Ball bearing
only) D B w/ retainer) d R15
61600 75MM 16MM 61650 1-1/4 R3
61602 80MM 16MM 61652 1
61604 85MM 16MM 61654 30MM
#64F010 #64F011
61606 90MM 16MM
N EW 61656 3/4
61608 95MM 16MM Order No.
61610 100MM 16MM (retainer only) d
R12
61612 105MM 16MM 61670 1-1/4
61614 110MM 16MM 61672 1 R5
R6 R10
61616 115MM 16MM 61674 30MM
61618 120MM 16MM 61676 3/4
61620 125MM 16MM
#64F012 #64F013
61622 130MM 16MM
61624 140MM 16MM
61626 150MM 16MM NOTE: Bearing only
61628 160MM 16MM (1-1/4 x 2-1/2) order
#61660 (no retainer). R10 R10
61630 170MM 16MM

40MM STEEL KNIVES #64F014 #64F015

6mm 6mm

22°

#64F000 #64F001 #64F016 #64F017

R7 R3
R8 R6
5° R12 R3.5

R6 R10 R5

#64F002 #64F003 #64F018 #64F019

Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
154
 SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES (CONT’D)
R7 R2.5
R5 R5 R6 45°
R3
R3.5
R3 R5 R15
R5
R7 R6.5
#64F020 #64F021 #64F036 #64F037

R11 R3.5
R8 R7.5
R7 R4
R5 R3.5
R7
R10
R8 15° R6

#64F022 #64F023 #64F038 #64F039

R5 R4
R5 R8
R4
R4
R10
R8 R6
R5
R5

#64F024 #64F025 #64F040 #64F041

R1 R5 R4
R9 R4 R4
R1
12°
R15
R8 R4
R5
#64F026 #64F027 #64F042 #64F043

R6 R6
R8 R6
R6 R6

R15 R10
R8 R5

#64F028 #64F029 #64F044 #64F045

R5 R6 R4
R6 R6
R5 R6
R5 R18 R15

#64F030 #64F031 #64F046 #64F047

R2.5 R4
R10
R6
R3 R10
R3
R5 R12
R3 R8

#64F032 #64F033 #64F048 #64F049

R12 R6
86° 86°
R8
R9

#64F034 #64F035 #64F050 #64F051

Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
155
SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES (CONT’D)

R6 R8 R6
R5
R10
R9
R5
R8 R9 R6

#64F052 #64F053 #64F068 #64F069

R6 R4
R8 45°
4mm

R6 R9 45°
R8

#64F054 #64F055 #64F070 #64F071

R8
R6 R15 45°
R8 4mm R8
R8
R6 45° 45°

#64F056 #64F057 #64F072 #64F073

R8
R12 4mm
4mm
R8 4mm
4mm
R10

#64F058 #64F059 #64F074 #64F075

R5 R8
R5 4mm

R12 5.7mm

R15 4mm
R12

#64F060 #64F061 #64F076 #64F077

R8 R5
R6 R3 R5
R3
R25 R10
R25 R10
R10 R6 R3
#64F062 #64F063 #64F078 #64F079

R8
48° R3
R6 R15
R4 R35

48° R5
R10

#64F064 #64F065 #64F080 #64F081

R8 45°
R7
R15 5mm
R5

#64F066 #64F067 #64F082 #64F083

Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
156
 SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES (CONT’D)
R15
45° 15° R20
R3
5mm 5mm R15
R4
R4 5° R6
#64F084 #64F085 #64F100 #64F101

15° R3 R3
R4 R23
5.2mm R40
R10 R4
R3 R4

#64F086 #64F087 #64F102 #64F103

R12 R3.5
R4 R8 R3
R15
R7 R8
R14
R12 R6
R6 R3 R7
R4
#64F088 #64F089 #64F104 #64F105

R6 R3
R3
10mm R14 R4
R5
R4
R4 R6
45°

#64F090 #64F091 #64F106 #64F107

R2.5
R2.5 45°
10mm R2.5 R20
R11
R2.5
R4
R2.5
#64F092 #64F093 #64F108 #64F109

R4
R11
8mm 8mm
R8 R6
R3

#64F094 #64F095 #64F110 #64F111

R8 15°
R6.5 R8
4.4mm R6
R6.5 4.4mm 6mm
R8 R11
R8
15°
#64F096 #64F097 #64F112 #64F113

R7 R7 15°
R7 R15
R7
8mm 6mm
R7 R7 R12
R7 R7 15°
#64F098 #64F099 #64F114 #64F115
Note: All knives are 40mm and are shown 50% of actual size. Each part # consists of one pair. See page 158 for blank (unground) knives.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
157
SHAPER CUTTERS & SETS
PROFILE PRO™ SHAPER CUTTERS
40MM STEEL KNIVES (CONT’D) 40MM STEEL KNIVES (CONT’D)

60° R5 R6

R4

R5 R6
#64F116 #64F117 #64F172 #64F173

R8
R10
R13.5 R13.5

R8 R10

#64F118 #64F119 #64F174 #64F175

R2.5
R12
R20 R15
R15
R3
R20 R3
R12 R15

#64F120 #64F121 #64F176 #64F177

R2.5 R2.5
R3 R20
R40
BLANK (UNGROUND) KNIVES
R3
R18
FOR CUSTOM GRINDING
R3
#64F122 #64F123 #64RM193
4mm
R12 R4
R6
6mm
R10 45°
R8 40mm 11mm
R10
R10 6mm
#64F124 #64F125
44.75mm

R10
R8 45°
45°
R6 45° #64RM599
R4
4mm
#64F126 #64F127
6mm
R15 50mm 11mm
R6.5
R5 6mm
R22
R4
46mm
#64F128 #64F129

R3 R4

R3 R4
#64F170 #64F171
Note: All knives (except #64RM599) are 40mm and are shown 50% of actual size. Each part # consists of one pair.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
158
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS

I n addition to the Profile-Pro™ cutterheads, there are replaceable carbide knife cutter-
heads for stile and rail, raised panel, glue joint, lock miter, finger-jointing, chamfering,
rabbeting, dadoing,.....and edge jointing. Each cutterhead features lightweight aluminum
alloy or solid steel construction with precision ground, micrograin carbide knives. Also, there
are several new CNC router bits for various applications, including mill-to-pattern carbide.
(See page 86.)

Most of these cutterheads comply with the strict regulations of the German “BG Test”,
making them among the safest and best cutters that money can buy. Each cutter has a
unique and positive locking system to hold the knives, which ensures exact indexing, less
down-time and more production. If you should require further information, please call our
Technical Hot-Line @1-800-445-0077.

STILE AND RAIL CUTTERHEAD

Aluminum alloy head with one-sided reversible carbide

knives, utilizing the same knives for both stile and rail cuts by
simply adjusting the spindle height of your shaper. The basic No.
61272 cutterhead includes the ogee fillet knives (No. RCK-60)
BG-TEST
and 3mm T-handle hex key. To achieve the classical, ogee or
167-028 traditional profiles, order No. 61272 and the desired knives
separately. All patterns are designed for 7/8" through 1" thick
doors.

RPM
Tool No. D B d Ideal/max.
D 61272 120mm (4-3/4") 40mm (1-1/2") 1-1/4" 6400/8400
d

Replacement Parts:
Order Qty.
No. Description Size Required
B 67144 Allen screws 8x1.0MM 4
67148 Slotted stop screws 4x.7MM 2
WB-22 Wedge blocks — 2
5012 ‘T’ handle hex key 3MM 1

Replacement Knives:
12mm
(Each part number
consists of one pair)
R 4mm R 5mm
Ogee Fillet
min 5 8mm No. RCK-60 Classical
7/8 mm No. RCK-64

Wood Illustrations Traditional

shown at No. RCK-66
approx. 50%
Ogee R 6mm
No. RCK-62 26.5˚

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items. Specifications shown (‘R8’, ‘R10’ etc.) are in millimeters.
159
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
RAISED PANEL CUTTERHEAD
Aluminum alloy head with three different carbide knife
profiles available. The standard cutterhead is furnished with the
No. RCK-42 “Traditional” knives. A regular slotted screwdriver
is all that is required to change the knives. To achieve the
Ogee or Cove profiles, order No. 61260 and the desired knives
separately. Knives have two cutting edges each.
RPM
Tool No. D B L d Ideal/max.
61260 160mm (6-1/4") 20mm (7/8") 50mm (2") 1-1/4" 4800/8000
D Replacement 3 x .5mm Pan Head screws, No. 67152 (4 required)

d
Replacement Knives:
(Each part number consists of one pair)

B
L
Wood Illustration shown at approx. 50%
R5mm
R5mm R20mm
R40mm
R40mm

B B B
3˚ 3˚ 3˚

50mm 50mm 50mm

Traditional No. RCK-42 Ogee No. RCK-44 Cove No. RCK-46

“BG” RAISED PANEL CUTTERHEAD

Aluminum alloy head with 2-sided replaceable carbide
knives. Manufactured to strict “BG” specifications, which limits
the chip thickness for a safer, more controlled cut. For use with
BG-TEST 1-1/4", 1" or 30mm spindles only. Standard bore is 1-1/4".
167-014 Includes 3mm T-Handle hex key.
RPM
Tool No. D B L d Ideal/max.
61262 180mm (7") 25mm (1") 60mm (2-3/8") 1-1/4" 4200/7000

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-78 Pair carbide knives 60MM 1
67144 Allen screws 8x1.0MM 4
WB-10 Wedge blocks — 2
5012 ‘T’ handle hex key 3MM 1

Wood Illustration
shown at approx. 50%

R5mm D
R50mm
R50mm d

B L

60mm
Replacement Knives:
No. RCK-78 (one pair)

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
160
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
CONCAVE AND CONVEX CUTTERHEAD
Aluminum alloy heads with replaceable carbide knives that
are ground with both concave and convex radii. Standard bore
is 1-1/4". Includes 3mm T-Handle hex key and special 1mm
BG-TEST knife setting gauge.
167-026
RPM
Tool No. D R B d Ideal/max.
61320 120mm (4-3/4") 10mm (3/8") 25mm (1") 1-1/4" 6400/10000
61324 124mm (4-7/8") 12mm (.472") 30mm(1-3/16") 1-1/4" 6200/9800

Replacement Parts:
100mm Order Qty.
No. Description Size Required
d RCK-74 Pair carbide knives 10MM 1(61320)
R

RCK-76 Pair carbide knives 12MM 1(61324)

67142 Allen screws 6x1MM 4
B WB-14 Wedge blocks For 10MM radius 2(61320)
WB-18 Wedge blocks For 12MM radius 2(61324)
5012 ‘T’ handle hex key 3MM 1
R

D 67156 Knife setting gauge 1MM 1

Actual Actual
Size Size
61320 61324

MULTI PROFILE CUTTERHEAD Aluminum alloy heads with special multi-radii replaceable
carbide knives. A very versatile cutter for moldings such as
beads, corner rounds, classical or a combination of each. Multiple
passes and depth settings will give even further combinations.
Two different sizes available. Standard bore is 1-1/4". Includes
3mm T-Handle hex key.
BG-TEST
RPM
167-018 Tool No. D B d Ideal/max.
61276 120mm (4-3/4") 40mm (1-1/2") 1-1/4" 6400/10000
61280 160mm (6-1/4") 50mm (2") 1-1/4" 4800/8000
Replacement Parts:
Order Qty.
No. Description Size Required
D
RCK-84 Pair carbide knives — 1(61276)
d
RCK-86 Pair carbide knives — 1(61280)
67142 Allen screws 6x1MM 4
67150 Flat head screws 4x.7MM 2
WB-22 Wedge blocks — 2(61276)
B
WB-36 Wedge blocks — 2(61280)
5012 ‘T’ handle hex key 3MM 1

Wood Illustration
Tool No. 61280 shown at approx. 50%
R 6mm
Replacement Knives
No. RCK-86
(one pair) R 4.8mm
R 8mm
50 R R 4.5mm
mm R 10mm 7
40 R 7mm Tool No. 61276
mm
Replacement Knives
7˚ No. RCK-84
(one pair)

25mm 16mm

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
161
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
GLUE JOINT CUTTERHEAD
Aluminum alloy head with two-sided replaceable carbide
knives. Manufactured to strict “BG” specifications, which limits
the chip thickness for a safer, more controlled cut. Standard
bore is 1-1/4". Includes 3mm T-handle hex key.
RPM
Tool No. D B d Ideal/max.
BG-TEST 61264 130mm (5-1/8") 50mm (2") 1-1/4" 6000/10000
167-015 61268 130mm (5-1/8") 60mm (2-3/8") 1-1/4" 6000/10000

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-80 Pair carbide knives 50MM 1(61264)
RCK-82 Pair carbide knives 60MM 1(61268)
67142 Allen screws 6x1MM 4
67182 Slotted stop screws 6x1MM 2
WB-30 Wedge blocks — 2(61264)
WB-34 Wedge blocks — 2(61268)
D 5005 ‘L’ shaped hex key 3MM 1
d

Wood Illustration
shown at
approx. 50%
B

Tool No. 61264

‘V’ TYPE GLUE JOINT CUTTERHEAD

Aluminum alloy head with two-sided replaceable carbide
knives. Manufactured to strict “BG” specifications, which limits
the chip thickness for a safer, more controlled cut. Standard
BG-TEST bore is 1-1/4". Includes 3mm T-handle hex key.
167-013
RPM
Tool No. D B d Ideal/max.
61296 90mm (3-1/2") 50mm (2") 1-1/4" 8500/10600

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-72 Pair carbide knives 50MM 1
67142 Allen screws 6x1MM 4
WB-10 Wedge blocks — 2
D 5012 ‘T’ handle hex key 3MM 1
d
max 50mm

83.5˚
B
Wood Illustration
shown at
approx. 50%

5mm

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
162
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
JOINTING CUTTERHEAD
Aluminum alloy head with 12 staggered carbide knives.
Each knife has four cutting edges each for extra production
®
and economy. Standard bore is 1-1/4". Includes Torx key.

RPM
BG-TEST Tool No. D B d Ideal/max.
61288 62mm (2-1/2") 80mm (3-1/8") 1-1/4" 8000/12000

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 Carbide knives, each 14x14x2MM 12
67154 Torx® screws 5x.8MM 12
5025 ‘L’ shaped Torx® key T-25 1

*NOTE: Minimum order 10 each for RCK-70.

D

SPIRAL JOINTING CUTTERHEAD

Aluminum alloy head with unique spiral/staggered design
where faster feed rates are more important than the finish.
Manufactured to strict “BG” specifications, which limits the chip
thickness for a safer, more controlled cut. Each knife has 4
cutting edges. Standard bore is 1-1/4". Includes Torx® key.
BG-TEST

RPM
Tool No. D B d Ideal/max.
61292 62mm (2-1/2") 80mm (3-1/8") 1-1/4" 8000/12000

Replacement Parts:
Order Qty.
No. Description Size Needed
*RCK-70 Carbide knives, each 14x14x2MM 12
67154 Torx® screws 5x.8MM 12
5025 ‘L’ shaped Torx® key T-25 1

D *NOTE: Minimum order 10 each for RCK-70.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30mm spindles.
Products shown in Bold indicate most popular items.
163
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
DIAL TYPE INDEXABLE GROOVING HEAD
4.0 TO 7.5MM KERF
Fully adjustable in 1/10mm (.004") increments from 4.0 to
STEEL BODY 7.5mm. Sizes are changed by simply unlocking and turning the
WITH 8 CARBIDE INSERT KNIVES adjusting collar, and then ‘dialing-in’ the desired width on the
easy-to-read scale. All eight knives have four cutting edges
each for long tool-life and economy.

MAX
Tool No. D B t d RPM
61330 130MM(5-1/8") 4.0 to 7.5MM(5/32 to 19/64") 20MM(25/32") 1-1/4" 10,200

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-71 4-sided knife #1 14x14x1.2MM 4
*RCK-18 4-sided knife #2 18x18x2.0MM 4
BG-TEST 67170 Screw retainer #1 4.0x.5x10MM 4
167-007 67172 Screw retainer #2 4.0x.5x12MM 4
67160 Flat head knife 4x.5x3.0MM 8
D retaining screws
67164 Slotted collar 5x.8x7.0MM 1
d locking screw
5090 Torx key
®
#T-9 1

B *Note: Minimum order 10 each for RCK-71 and RCK-18.

DIAL TYPE INDEXABLE GROOVING HEAD

8.0 TO 15MM AND 12.5 TO 24MM KERF
Same as above #61330, but kerf range is 8.0 to 15mm, or
STEEL BODY 12.5 to 24mm.
WITH 8 CARBIDE INSERT KNIVES

MAX
Tool No. D B t d RPM
61340 160MM(6-5/16") 8.0 to 15MM(5/16" to 19/32") 30MM(1-3/16") 1-1/4" 8,200
61342 160MM(6-5/16") 12.5 to 24MM(1/2" to 15/16") 30MM(1-3/16") 1-1/4" 8,200

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 4-sided knife #1 14x14x2.0MM 4
*AMA-17 2-sided knife #2 7.5x12x1.5MM 4(61340 only)
AMA-12 4-sided knife #3 12x12x1.5MM 4(61342 only)
67162 Slotted head knife screws 5x.8x5MM 4
67166 Allen head set screws 5x.8x16MM 4
BG-TEST WB-42 Wedge blocks for 7.5MM knives — 4
167-005 WB-44 Wedge blocks for 15MM knives — 4
D
5007 ‘L’ shaped hex key 2.5MM 1
t
d *Note: Minimum order 10 each for RCK-70, AMA-17 and AMA-12.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
164
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
SHIM TYPE ADJUSTABLE GROOVING HEAD
4.0 TO 7.5MM KERF This type of head will perform the same function as the
STEEL BODY dial type shown on previous page, but is more economical
because it uses a set of steel shims to adjust the head.
WITH 8 CARBIDE INSERT KNIVES

MAX
Tool No. D B t d RPM
61350 160MM(6-5/16") 4.0 to 7.5MM(5/32" to 19/64") 30MM(1-3/16") 1-1/4" 8,300

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-71 4-sided knife #1 14x14x1.2MM 4
*RCK-18 4-sided knife #2 18x18x2.0MM 4
67170 Screw retainer #1 4.0x.5x10MM 4
BG-TEST 67172 Screw retainer #2 4.0x.5x12MM 4
167-008 67160 Flat head knife 4x.5x3.0MM 8
retaining screws
D 67164 Slotted collar 5x.8x7.0MM 1
locking screw
d 5090 Torx® Key #T-9 1
67186 6-piece shim set .1,.4,.5MM & 3x1MM

*Note: Minimum order 10 each for RCK-71 and RCK-18.

B

SHIM TYPE ADJUSTABLE GROOVING HEAD

8.0 TO 15MM AND 12.5 TO 24MM KERF This type of head will perform the same function as the dial
STEEL BODY type shown previous page, but is more economical because it
WITH 8 CARBIDE INSERT KNIVES uses a set of steel shims to adjust the head.

MAX
Tool No. D B t d RPM
61360 160MM(6-5/16") 8.0 to 15MM(5/16" to 19/32") 30MM(1-3/16") 1-1/4" 8,200
61362 160MM(6-5/16") 12.5 to 24MM(1/2" to 15/16") 30MM(1-3/16") 1-1/4" 8,200

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 4-sided knife #1 14x14x2.0MM 4
*AMA-17 2-sided knife #2 7.5x12x1.5MM 4(61360 only)
*AMA-12 4-sided knife #3 12x12x1.5MM 4(61362 only)
BG-TEST
67162 Slotted head knife screws 5x.8x5MM 4
167-004
67166 Allen head set screws 5x.8x16MM 4
D
WB-42 Wedge blocks for 7.5MM knives — 4(61360 only)
WB-44 Wedge blocks for 15MM knives — 4(61362 only)
d
5007 ‘L’ shaped hex key 2.5MM 1
67186 6-piece shim set (1 each @.1,.4,.5MM & 1
3 each @1.0MM)
B

*Note: Minimum order 10 each for RCK-70, AMA-17 and AMA-12.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
165
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
INTERMEDIATE STACKABLE CUTTERS
FOR SHIM TYPE GROOVING HEADS Use with shim type adjustable grooving head models
7, 15 AND 20MM KERFS #61350, 61360 and 61362 on previous page. Enables
expansion of standard sets in the same way that a stackable
dado set works. The intermediate cutter(s) fit between the two
outside cutters. Order extra shim sets (above) as required.

Use with MAX

Tool No. D B t d Cutterhead # RPM
61384 160MM(6-5/16") 7.0MM(9/32") 30MM(1-3/16") 1-1/4" 61350, 61360 8,200
and 61362
61386 160MM(6-5/16") 15.0MM(19/32") 30MM(1-3/16") 1-1/4" as above 8,200
61388 160MM(6-5/16") 20.0MM(25/32") 30MM(1-3/16") 1-1/4" as above 8,200

Replacement Parts:
Order Qty.
BG-TEST No. Description Size Required
167-004 *AMA-17 2-sided knife #1 7.5x12x1.2MM 2(61384 only)
*ICK-15 2-sided knife #2 15.0x12x1.5MM 2(61386 only)
*ICK-20 2-sided knife #3 20.0x12x1.5MM 2(61388 only)
D 67166 Allen head set screws 5x.8x16MM 2
WB-42 Wedge blocks for 7.5MM knives — 2
d WB-44 Wedge blocks for 15.0MM knives — 2
WB-46 Wedge blocks for 20.0MM knives — 2
5007 ‘L’ shaped hex key 2.5MM 1
B
*Note: Minimum order 10 each for AMA-17, ICK-15 and ICK-20.

INDEXABLE CHAMFER CUTTERHEADS

2-WING This series of cutterheads utilizes either lightweight
WITH CARBIDE INSERT KNIVES aluminum or solid steel bodies with 2-sided replaceable
carbide knives. An exclusive adjustment system is used that
features positive stops at 7.5° increments for precise indexing.
Two different types are available- #61304 is aluminum with
+/- 45° range and #61306 is solid steel with +/- 60° range.
Also available in a CNC router bit - see page 85.
Adjustment MAX
Tool No. D B Range d RPM
61304 120MM(4-3/4") 40MM(1-37/64) 0°, 7.5°, 15°, 22.5°, 30°, 1-1/4" 8,500
(Aluminum) 37.5° and 45°, R&L.
61306 130MM(5-1/8") 50MM(1-31/32) 0°, 7.5°, 15°, 22.5°, 30° 1-1/4" 8,100
Cutter #61306 (Steel) 37.5°, 45°, 52-1/2° and 60° R&L.
shown (Steel).
Replacement Parts:
Order Qty.
BG-TEST No. Description Size Required
167-017 *RCK-40 2-sided Knife #1 40x12x1.5MM 2(61304 only)
*RCK-50 2-sided Knife #2 50x12x1.5MM 2(61306 only)
D
67166 Socket head screws 5x.8x15MM 4
d 67171 Screw head retainers — 4
67174 Allen head screws 6x1x8MM 4
67173 Screw tail retainer 5x.8mm threaded 4
WB-50 Wedge blocks for 40MM knives — 2
WB-52 Wedge blocks for 50MM knives — 2
B 5004 ‘L’ shaped hex key 3.0MM
5014 ‘T’ handle hex key 4.0MM

*Note: Minimum order 10 each for RCK-40, and RCK-50.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
166
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
INDEXABLE CHAMFER CUTTERHEAD
2-WING This aluminum head is similar to tool no. 61304 on previous
WITH CARBIDE INSERT KNIVES page, except that it is infinitely adjustable from 90° both right and
left (does not have positive stops). Using the graduated scale, the
cutter can be set-up for any angle.

Adjustment MAX
Tool No. D B Range d RPM
61310 160MM 50MM +/- 90° 1-1/4" 8,000

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-50 2-sided knife #1 50x12x1.5MM 2
67174 Socket head screws 6x1x8MM 4
BG-TEST 67179 Socket head retaining screws 4x.7x25MM 2
167-012 67175 Screw head retainer 4x.7MM 2
67177 Screw tail retainer 4x.7MM 2
WB-68 Wedge blocks for 50mm knives — 2
D
5012 ‘T’ handle hex key 3.0MM 1
d
*Note: Minimum order 10 each for #RCK-50.

INDEXABLE LOCK MITER CUTTERHEAD

2-WING
This cutterhead utilizes a solid steel body with replaceable
WITH CARBIDE INSERT KNIVES carbide knives. An exclusive adjustment system is used that
features positive stops at 7.5° increments for precise indexing.
The ideal cutter for joining various polygon shapes such as
hexagons (6-sided), octagons (8-sided), etc.

Adjustment MAX
Tool No. D B Range d RPM
61298 170mm(6-11/16") 40MM(1-37/64") 0°, 7.5°, 15°, 22.5°, 1-1/4" 6,000
30°, 37.5° and 45°.

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-90 1-sided knives (pair) 40x1.5MM 1pr.
67142 Socket head screws 6x1x16MM 4
67166 Socket head retaining screws 5x.8x16MM 4
D 67171 Screw head retainer — 4
67173 Screw tail retainer 5x.8MM threaded 4
d WB-58 Wedge blocks — 2
5004 ‘L’ shaped hex key 3.0MM 1
5014 ‘T’ handle hex key 4.0MM 1
B

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
167
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
45° LOCK MITER CUTTERHEAD
2-WING This is a fixed cutterhead at the traditional 45° setting for
WITH CARBIDE INSERT KNIVES joining squares or rectangles. Heavy duty production cutter
featuring solid steel body and shear angle for fast, smooth
cutting. For material sizes 9/16" through 1-1/16" thickness.

MAX
Tool No. D B d RPM
61290 170MM(6-11/16") 40MM(1-37/64") 1-1/4" 6,000

Replacement Parts:
Order Qty.
BG-TEST No. Description Size Required
167-023 RCK-90 1-sided knives (pair) 40x1.5MM 1
67142 Socket head screws 6x1x16MM 4
WB-54 Wedge blocks — 2
5005 ‘L’ shaped hex key 3.0MM 1
B 5014 ‘T’ handle hex key 4.0MM 1

d
D
90°
15-28MM

HIGH-PRODUCTION FINGER JOINTING SYSTEM

3-WING A high-production, high-performance finger jointing system
WITH CARBIDE INSERT KNIVES for automatic or power feed only. This design features 3-wing
stackable cutterheads with solid steel bodies and carbide
insert knives. Each cutter will cut up to 40MM high and
10MM deep.

MAX
Tool No. D B t d RPM
61270 170MM(6-11/16") 40MM(1-37/64") 10MM(3/8") 1-1/4" 7,000

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-92 1-sided knives (each) 40x1.5MM 3
67142 Socket head screws 6x1x16MM 6
67184 Socket head screws 4x.7x16MM 6
WB-56 Wedge blocks — 3
BP-10 Steel backing plates — 3
5004 ‘L’ handle hex key 3.0MM 1

d B
D
t

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
168
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
ALUMINUM CONCAVE & CONVEX CUTTERHEADS
2-WING Specialty decorative cutters for single or multiple radii.
WITH CARBIDE INSERT KNIVES Available in matching concave and convex profiles.

MAX
Tool No. Type D D1 B R d RPM
61420 Concave 180MM(7-3/32") 107MM 35MM(1-3/8") 4,6,8,10MM(5/32",15/64",5/16" & 25/64") 1-1/4" 7,500
61430 Convex 180MM(7-3/32") 91MM 35MM(1-3/8") 4,6,8,10MM(5/32",15/64",5/16" & 25/64") 1-1/4" 7,500
Replacement Parts:
Order Qty.
No. Description Size Required
RCK-94 2-sided knves (pair) for 61420 50x16x2MM 1
RCK-96 2-sided knves (pair) for 61430 50x16x2MM 1
67142 Socket head screws 6x1x16MM 4
67148 Flat head stop screws 4x.7x8MM 2
WB-60 Wedge blocks for 61420 — 2
61430 WB-62 Wedge blocks for 61430 — 2
5005 ‘L’ shaped hex key 3.0MM 1

d D
d

B
B

D1
D1
61420

ALUMINUM MOULDING CUTTERHEAD

2-WING
Specialty decorative cutter for architectural moldings such
WITH CARBIDE INSERT KNIVES as chair rail, base, crown, etc.

Tool No. D D1 B R d
61440 180MM(7-3/32") 93MM 40MM(1-37/64") 8, 11MM(5/16, 7/16") 1-1/4"

Replacement Parts:
Order Qty.
No. Description Size Required
RCK-98 2-sided knives (pair) 60x1.5MM 1
D
67142 Socket head screws 6x1x16MM 4
d 67148 Flat head stop screws 4x.7x8MM 2
WB-64 Wedge blocks — 2
5005 ‘L’ shaped hex key 3.0MM 1

B
60

R
8
R
11

D1
R
11
R
8

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
169
SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
PLATE JOINTER REPLACEMENT CUTTER
WITH CARBIDE INSERT KNIVES

Used as a replacement for Lamello, Freud, Kaiser, and

other brands of ‘biscuit’ cutters. Ideal for any shop and never
needs sharpening. Features include solid tool-steel body, spur
cutters and four-sided carbide knives. Choose the 4-knife
version for faster cutting or the 8-knife for smoother cuts.

Tool No. Description D B d [Link]

61450 4-knife replacement cutter 100MM 4.0MM 22MM 13,300
61452 8-knife replacement cutter 100MM 4.0MM 22MM 13,300

Cutter 61452 shown Replacement Parts:

BG-TEST Order Qty. Required
167-010 No. Description Size 61450 61452
*RCK-71 4-sided spur knife 14x14x1.2MM 2 4
*RCK-18 4-sided plow knife 18x18x2.0MM 2 4
67170 Screw retainer for RCK-70 4.0x.5x10MM 2 4
D 67172 Screw retainer for RCK-18 4.0x.5x12MM 2 4
67160 Flat head knife screws 4x.5x3.0MM 4 8
d
5090 Torx® key T-9 1 1

B
*Note: Minimum order 10 each for RCK-18 and RCK-71.

STRAIGHT CUTTERHEADS
WITH CARBIDE INSERT KNIVES 2-wing straight cutters featuring aluminum alloy body,
2-sided carbide insert knives and four, 4-sided spur knives
for a super clean finish. Choose either 30MM or 50MM
cutting height.

RPM
Tool No. D B d Ideal/Max
61460 100MM(4") 30MM(1-3/16") 1-1/4" 7600/12000
61462 100MM(4") 50MM(2") 1-1/4" 7600/12000

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 4-sided spur knife 14x14x2.0MM 4
*RCK-30 2-sided 30MM knife 30x12x1.5MM 2
BG-TEST *RCK-50 2-sided 50MM knife 50x12x1.5MM 2
67162 Slotted head knife screws 5.0x.8x5MM 4
167-002
67142 Socket head knife screws 6.0x1.0MM 4
D WB-48 Wedge Blocks for 30MM knives 30MM 2
WB-52 Wedge Blocks for 50MM knives 50MM 2
d 5005 ‘L’ shaped hex key 3.0MM 1
67192 Knife setting gauge 0.55MM 1

B
*Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
170
 SHAPER CUTTERS & SETS
INSERT SHAPER CUTTERS
STRAIGHT CUTTERHEADS
WITH CARBIDE INSERT KNIVES
2-wing straight cutters featuring solid tool-steel body,
2-sided carbide insert knives and four, 4-sided spur knives
for a super clean finish. Choose either 30MM or 50MM
cutting height.

RPM
Tool No. D B d Ideal/Max
61470 125MM(5") 30MM(1-3/16") 1-1/4" 6100/10300
61472 125MM(5") 50MM(2") 1-1/4" 6100/10300

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 4-sided spur knife 14x14x2.0MM 4
*RCK-30 2-sided 30MM knife 30x12x1.5MM 2
BG-TEST *RCK-50 2-sided 50MM knife 50x12x1.5MM 2
67162 Slotted head knife screws 5.0x.8x5MM 4
167-003
67142 Socket head knife screws 6.0x1.0MM 4
D WB-48 Wedge blocks for 30MM knives 30MM 2
d WB-52 Wedge blocks for 50MM knives 50MM 2
5005 ‘L’ shaped hex key 3.0MM 1
67192 Knife setting gauge 0.55MM 1

B
*Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.

SHEAR CUTTERHEADS
WITH CARBIDE INSERT KNIVES 4-wing straight cutters with alternating up/down shear
angle featuring solid tool-steel body, 2-sided carbide insert
knives and four, 4-sided spur knives for a super clean finish.
Choose either 30MM or 50MM cutting height. Shear action
gives fast, clean cuts.
RPM
Tool No. D B d Ideal/Max
61480 125MM(5") 30MM(1-3/16") 1-1/4" 6100/10300
61482 125MM(5") 50MM(2") 1-1/4" 6100/10300

Replacement Parts:
Order Qty.
No. Description Size Required
*RCK-70 4-sided spur knife 14x14x2.0MM 4
*RCK-30 2-sided 30MM knife 30x12x1.5MM 4
*RCK-50 2-sided 50MM knife 50x12x1.5MM 4
BG-TEST
67162 Slotted head knife screws 5.0x.8x5MM 4
167-003
67142 Socket head knife screws 6.0x1.0MM 8
D WB-72 Wedge blocks for 30MM knives 30MM 4
WB-70 Wedge blocks for 50MM knives 50MM 4
d 5005 ‘L’ shaped hex key 3.0MM 1
67192 Knife setting gauge 0.55MM 1

B
*Note: RCK-30, RCK-50 and RCK-70 minimum order 10 each.

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
171
SHAPER CUTTERS & SETS
MULTI PRO™ SHAPER CUTTERS

TM

M u l t i P R O
SHAPER CUTTERS
ENDLESS POSSIBILITIES are yours when you purchase this set of 5 Carbide Tipped
2-Wing Cutters allowing you to execute countless profiles and shapes.

SCS-2000 Complete Set w/30MM Bore.

SCS-2100 Complete Set w/1-1/4" Bore.

5
Cutter
Tool No. No. D d B

2.5

6
R
SCS2000-1 1 140MM 30MM 5MM
2

6.5
SCS2000-2 2 140MM 30MM 9MM

R6
SCS2000-3 3 140MM 30MM 12.5MM

2.5
SCS2000-4 4 140MM 30MM 20MM

6
R
SCS2000-5 5 140MM 30MM 28MM 3

4 6
*BU-942 — 1-1/4x30MM
5 pc. bushing set

6 4 10
4
Cutter
Tool No. No. D d B
SCS2100-1 1 140MM 1-1/4" 5MM
R
SCS2100-2 2 140MM 1-1/4" 9MM 12

SCS2100-3 3 140MM 1-1/4" 12.5MM

16

SCS2100-4 4 140MM 1-1/4" 20MM 12 5

R
SCS2100-5 5 140MM 1-1/4" 28MM
12

*BU-940 — 1-1/4 5 pc. bushing set

*Not included in sets

The following are illustrations showing the different profiles and combinations based on single, double and triple cut. We have
enclosed a set of spacers to adjust the spacing as needed. (Illustrations shown approx. 30%)

2 3
1 2 4
1
2 1
2 2
4 1 1
2
3 2
1
3
4 4
3
3
1

See pages 153-154 for reducing T-Bushings and ball bearing rub collars for 1", 3/4" and 30MM spindles.
Products shown in Bold indicate most popular items.
172
 SHAPER CUTTERS & SETS
MULTI PRO™ SHAPER CUTTERS

3 2
4
2 2 2
2 3
1
4
1 2 3
2 5 5
4
3

3 4 5
4
4
4 3
5
3
3 4
5 4 4
3

5
4 4

4 4

4 1 1
4

2
4 2
4 1
4
1 1
3 2
1
3
2 3 5 5
5
4 5 5
5 5
3 4 4
2
4
5
4 4 4
5 5
2 2
1 1
4 2
1
3 4 4
4 4
5 4
1
4
2 2
4 5
4 3 3
4

173