MORTICE LOCKCASES

5400 Series
Mortice Cylinder Locks

Introduction
A comprehensive range of Euro profile
cylinder mortice lockcases available with
round and square forend and strikes.
Note: when used on fire doors
intumescent packs must be used to
maintain fire door integrity.

Features & Functions

ƒ Zinc coated steel case
ƒ Backset 60mm
ƒ Centres 72/78mm
ƒ Grade 304 stainless steel single
piece round or square forend
ƒ Quick reversible latch allows
quick and trouble free on-site
handing without the need
to dismantle the lockcase
ƒ Profiled latch and forend provides
very positive location and a
smooth, quiet operation
ƒ Satin nickel plated for corrosion
resistance 5470.60.S

ƒ 25˚ follower action with

springing suitable for high 5420.60.R
frequency applications
ƒ Positive follower angle (1˚)
reduces the effect of wear which
can lead to lever droop
ƒ 22mm drill resistant double throw
bolt from 2 turns of the cylinder
offers high levels of physical
security on sashlocks and
deadlock variants Certification
ƒ Bolt through fixing holes to UKCA Marked to EN 12209 - 5410 (1121-CPR-AG7625)
DIN 18251
- 5420, 5430, 5440, 5470 (1121-CPR-AG7626)
ƒ Guided cylinder screw accurately
aligns the fixing to the cylinder CE Marked to EN 12209 - 5410 (2812-CPR-AG0017)

ƒ Cylinder latch function enables - 5420, 5430, 5440, 5470 (2812-CPR-AG0018)

the cylinder to withdraw the Certifire Approved (CF741)
deadbolt on the first turn and Fire tested to EN 1634-1 for use on fire doors up to 90 mins timber / 4hr steel
the latch on the second turn of
[* May be fitted to fully insulated steel based doorsets or uninsulated steel based
the cylinder (5420, 5430)
doorsets where the closer is fitted to the fire risk face only].
ƒ 10mm throw deadbolt operated
by thumbturn & emergency Environmental Product Declaration in accordance with ISO 14025 and EN 15803
release on bathroom sashlock DoP available at www.britondops.co.uk

DATASHEET
ML-003 Allegion (UK) Limited
35 Rocky Lane, Aston, Birmingham B6 5RQ
T: +44 (0) 330 8080 617
ISSUE DATE: September 2022 E: [email protected] www.briton.co.uk
MORTICE LOCKCASES

5400 Series Mortice Cylinder Locks

Product features Product references

5410.60.R 5420.60.R 5430.60.R 5440.60.R 5470.60.R
Lock Function Deadlock Sashlock Bathroom Lock Latch Roller Bolt
Forend style Radiused Radiused Radiused Radiused Radiused
Backset 60mm 60mm 60mm 60mm 60mm
Centres n/a 72mm 78mm n/a n/a
CE Classification 3X810G2BC00 3X810G2BC20 3X810G-BG20 3X810G-B020 NPDC810-0B000

Product features Product references

5410.60.S 5420.60.S 5430.60.S 5440.60.S 5470.60.S
Lock Function Deadlock Sashlock Bathroom Lock Latch Roller Bolt
Forend style Square Square Square Square Square
Backset 60mm 60mm 60mm 60mm 60mm
Centres n/a 72mm 78mm n/a n/a
CE Classification 3X810G2BC00 3X810G2BC20 3X810G-BG20 3X810G-B020 NPDC810-0B000

89
20
3
25

25 25 16.5 42
12
12.1
30.7

63
46

46

150

99
185

145

145

70
21.5

235
165

202
72

72
35

20.5
Strike 5410 Strike 5440
38 Strike 5420/5430

60
24

All dimensions are in mm Strike 5470

15

Finishes
Accessories & Parts
All lockcases available in stainless 5000.001 Heavy Duty Strike Box For Sashlocks & Bathroom Locks
steel with a satin finish. 5000.003 Square End Rebate Kit (13mm) For Sashlocks
5000.005 Square End Rebate Kit (13mm) For Latches & Nightlatches
5000.007 Square End Rebate Kit (13mm) For Deadlocks
5000.009 Standard Radius Strike For Sashlocks
5000.010 Standard Square Strike For Sashlocks
SS
Satin stainless steel 5000.011 Standard Round Strike For Latches
5000.013 Standard Round Strike For Deadlocks
5000.022 Heavy Duty Strike Box For Sashlocks
5400.IP Intumescent Pack for use on fire doors

DATASHEET
ML-003

ISSUE DATE: September 2022

 MORTICE LOCKCASES

5400 Series
General Maintenance

Mortice Lockcases Types of maintenance

There are two principal types of Much of the routine maintenance recommended consists of a combination of
mortice lock, cylinder locks and lever visual and mechanical checks, cleaning and lubrication. Look out for the icons
locks. opposite which provide a ‘quick glance’ reminder of the maintenance required.
Cylinder locks are two part locks,
having a separate locking cylinder
which fits into the lockcase. The Visual checks
cylinder protrudes from one or both
Primarily making a visual check on the product and surrounding
faces of the door and accepts the key
door/frame looking for wear, damage, and general condition.
which operates locking function.
Lever locks have the locking function
and keyway integral with the lockcase. Functional checks

Provided the lock and its hardware Consists of checking that the product operates properly ensuring
have been correctly installed and the the door can fully close without any binding or undue force
door has not been distorted, the lock required. Check that any seals or weatherstripping do not inhibit
and hardware should not need to be correct operation of the door
adjusted or lubricated.
Check fixings
Fixings need to be checked regularly and tightened when
necessary. Check that no projection of fixings prevents the door
from swinging freely.

Lubricating
The keyway of a cylinder should NOT be lubricated with oil. A light
application of powdered graphite may be used.

Cleaning
Build up of grease, dust and harmful chemicals should be removed
to prevent corrosion and maintain the product finish.

DATASHEET
ML-003 Allegion (UK) Limited
35 Rocky Lane, Aston, Birmingham B6 5RQ
T: +44 (0) 330 8080 617
ISSUE DATE: September 2022 E: [email protected] www.briton.co.uk
MORTICE LOCKCASES

Mortice Lockcase Maintenance

A
B
MORTICE LOCKCASES
Primary components of the cylinder lock (opposite) are:
A - Forend (fixings may be concealed beneath a forend cover
plate); B - Lockcase (cover should not be removed);
C - Latchbolt; D - Follower; E - Deadbolt; F - Cylinder port (on C
D
bathroom locks this is replaced by a second follower which is
operated by the thumbturn; G - Cylinder fixing screw.

MONTHLY
Check lock forend and lever handles for dirt and grease and wipe clean as
directed by the "Care of Finishes" on page 16 of the ‘Service & Maintenance
Guide’..

ANNUALLY
Check that the latch and deadbolt (if appropriate) operate smoothly and that the
levers (where fitted) return to the horizontal position.
Check that the latch and/or deadbolt locate fully into their strike plate. Any
misalignment of the lock and the strike should be rectified immediately.
Check that the key enters the cylinder (except bathroom locks) smoothly and that
the key (and thumbturn if fitted) operates the lock mechanism smoothly.
Check that fixings are tight on the lock and the lever furniture, including the grub
screw fixing of the lever handles.
If necessary a small amount of light machine oil can be used around the shank of
the levers.

DATASHEET
ML-003

ISSUE DATE: September 2022