MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A

QUADRUPLE LINE RECEIVERS

SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

D Input Resistance . . . 3 kΩ to 7 kΩ SN55189, SN55189A . . . J OR W PACKAGE

D Input Signal Range . . . ± 30 V

MC1489, MC1489A, SN75189, SN75189A
D, N, OR NS† PACKAGE
D Operate From Single 5-V Supply (TOP VIEW)

D Built-In Input Hysteresis (Double

Thresholds) 1A 1 14 VCC
D Response Control that Provides: 1CONT 2 13 4A
Input Threshold Shifting 1Y 3 12 4CONT
2A 4 11 4Y
Input Noise Filtering
D Meet or Exceed the Requirements of
2CONT
2Y
5
6
10
9
3A
3CONT
TIA / EIA-232-F and ITU Recommendation
GND 7 8 3Y
V.28
D Fully Interchangeable With Motorola † The NS package is only available left-end taped and reeled.
MC1489 and MC1489A For SN75189, order SN75189NSR.

description SN55189, SN55189A . . . FK PACKAGE

(TOP VIEW)
These devices are monolithic low-power Schottky

1CONT
quadruple line receivers designed to satisfy the

VCC
requirements of the standard interface between

NC
1A

4A
data-terminal equipment and data-communica-
tion equipment as defined by TIA / EIA-232-F. A
3 2 1 20 19
separate response-control (CONT) terminal is 1Y 4 18 4CONT
provided for each receiver. A resistor or a resistor NC 5 17 NC
and bias-voltage source can be connected 2A 6 16 4Y
between this terminal and ground to shift the input NC 7 15 NC
threshold levels. An external capacitor can be 2CONT 8 14 3A
connected between this terminal and ground to 9 10 11 12 13
provide input noise filtering.
2Y

3Y
NC

3CONT
The SN55189 and SN55189A are characterized GND
for operation over the full military temperature
range of – 55°C to 125°C. The MC1489,
NC – No internal connection
MC1489A, SN75189, and SN75189A are
characterized for operation from 0°C to 70°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Motorola is a trademark of Motorola, Incorporated.

PRODUCTION DATA information is current as of publication date. Copyright  1998, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested
standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production
testing of all parameters. processing does not necessarily include testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

 MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

logic symbol†

1A 1
3 1Y
1 CONT 2 THRS ADJ
4
2A 6 2Y
2 CONT 5
3A 10 8 3Y
3 CONT 9
13 11 4Y
4A
4 CONT 12

† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, J, N, NS, and W packages.

logic diagram (positive logic)

A Y

Response
Control

schematic (each receiver)

VCC

9 kΩ 5 kΩ 1.66 kΩ

Output Y

Response R1
Control

4 kΩ
Input A

10 kΩ
GND

MC1489 MC1489A
SN55189 SN55189A
SN75189 SN75189A
R1 8.4 kΩ 1.84 kΩ
Resistor values shown are nominal.

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V
Output voltage, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: SN55189, SN55189A . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
MC1489, MC1489A, SN75189, SN75189A . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds, FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or NS package . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.

DISSIPATION RATING TABLE

TA ≤ 25°C DERATING FACTOR TA = 70°C TA = 125°C
PACKAGE
POWER RATING ABOVE TA = 25°C POWER RATING POWER RATING
D 950 mW 7.6 mW/°C 608 mW N/A
FK 1375 mW 11.0 mW/°C 880 mW 275 mW
J‡ 1375 mW 11.0 mW/°C 880 mW 275 mW
N 1150 mW 9.2 mW/°C 736 mW N/A
NS 625 mW 4.0 mW/°C 445 mW N/A
W 1000 mW 8.0 mW/°C 640 mW 200 mW
‡ In the J package, SN55189 and SN55189A chips are either silver glass or alloy mounted.

recommended operating conditions

MIN NOM MAX UNIT
Supply voltage, VCC 4.5 5 5.5 V
Input voltage, VI –25 25 V
High-level output current, IOH –0.5 mA
Low-level output current, IOL 10 mA
Operating free-air temperature, TA 0 70 °C

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3

MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

electrical characteristics over operating free-air temperature range, VCC = 5 V ± 1% (unless

otherwise noted)
MC1489, MC1489A
SN55189
TEST SN75189
PARAMETER TEST CONDITIONS† SN55189A UNIT
FIGURE SN75189A
MIN TYP‡ MAX MIN TYP‡ MAX
TA = 25°C 1 1.3 1.5 1 1.3 1.5
’89 TA = 0°C to 70°C 0.9 1.6
Positive-going
g g input TA = – 55°C to 125°C 0.6 1.9
VIT
IT+ 1 V
threshold voltage TA = 25°C 1.75 1.9 2.25 1.75 1.9 2.25
’89A TA = 0°C to 70°C 1.55 2.25
TA = – 55°C to 125°C 1.30 2.65
TA = 25°C 0.75 1.0 1.25 0.75 1.0 1.25
Negative-going
N ti i input
i t
VIT– 1 ’89, ’89A TA = 0°C to 70°C 0.65 1.25 V
threshold voltage
TA = – 55°C to 125°C 0.35 1.6
High-level
g VI = 0.75 V, IOH = – 0.5 mA 2.6 4 5 2.6 4 5
VOH 1 V
output voltage Input open, IOH = – 0.5 mA 2.6 4 5 2.6 4 5
Low-level
VOL 1 VI = 3 V
V, IOL = 10 mA 02
0.2 0 45
0.45 02
0.2 0 45
0.45 V
output voltage
High-level
g VI = 25 V 3.6 8.3 3.6 8.3
IIH 2 mA
input current VI = 3 V 0.43 0.43
Low-level VI = – 25 V – 3.6 – 8.3 – 3.6 –8.3
IIL 2 mA
input current VI = – 3 V – 0.43 – 0.43
Short-circuit
IOS 3 –3 3
–3 mA
output current
ICC Supply current 2 VI = 5 V, Outputs open 20 26 20 26 mA
† All characteristics are measured with the response-control terminal open.
‡ All typical values are at VCC = 5 V, TA = 25°C.

switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C

TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
FIGURE
tPLH Propagation delay time, low- to high-level output RL = 3.9 kΩ 25 85
ns
tPHL Propagation delay time, high- to low-level output RL = 390 Ω 25 50
4
tTLH Transition time, low- to high-level output RL = 3.9 kΩ 120 175
ns
tTHL Transition time, high- to low-level output RL = 390 Ω 10 20

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

PARAMETER MEASUREMENT INFORMATION†

VCC

VIT, V1
– IOH

VOH
Response
Control IOL
VOL

Open RC RC
Unless
Otherwise CC
Specified – VC +VC

Figure 1. VIT + , VIT – , VOH , VOL

VCC
ICC (see Note A)
IIH
VI Open
IIL

Response Control Open

NOTE A: ICC is tested for all four receivers simultaneously.

Figure 2. IIH , IIL , ICC

VCC

– IOS

Response
Control
Open

Figure 3. IOS
† Arrows indicate actual direction of current flow. Current into a terminal is a positive value.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5

MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

PARAMETER MEASUREMENT INFORMATION

VCC

Output RL
Pulse
Generator
(see Note A) See Note C

Response CL = 15 pF
Control (see Note B)
Open
TEST CIRCUIT

≤10 ns ≤10 ns
4V
90% 90%
Input 50% 50%
10% 10%
0V
tPHL tPLH
VOH
90% 90%
Output 50% 50%
10% 10%
VOL
tTHL tTLH
VOLTAGE WAVEFORMS

NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, tw = 500 ns.
B. CL includes probe and jig capacitances.
C. All diodes are 1N3064 or equivalent.

Figure 4. Test Circuit and Voltage Waveforms

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

TYPICAL CHARACTERISTICS
SN65189, SN75189
OUTPUT VOLTAGE
vs

ÁÁÁ ÁÁÁÁ ÎÎÎÎ ÁÁÁÁ ÁÁÁÁÁ

ÁÁÁÁ
ÁÁÁÁ
INPUT VOLTAGE

ÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ

6

ÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ

ÁÁÁÁ
RC = 5 kΩ RC = 13 kΩ RC = ∞ RC = 11 kΩ VCC = 5 V
VC = 5 V VC = 5 V VC = – 5 V
TA = 25°C

ÁÁÁÁ
5
O – Output Voltage – V

See Figure 1

ÎÎÎÎÎÎ ÎÎÎÎ
ÎÎÎÎÎÎ ÎÎÎÎ
3
VIT– VIT+ VIT– VIT+ VIT– VIT+ VIT– VIT+

2
VO
V

0
–3 –2 –1 0 1 2 3 4 5
VI – Input Voltage – V

Figure 5

SN65189A, SN75189A
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
6
ÁÁÁÁ ÎÎÎÎ ÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ ÎÎÎÎ
RC = ∞
ÁÁÁÁ
ÁÁÁÁÁ
RC = 5 kΩ RC = 11 kΩ VCC = 5 V

ÁÁÁÁÁ
VC = 5 V VC = – 5 V TA = 25°C
5 See Figure 1
O – Output Voltage – V

3
VIT– VIT+ VIT– VIT+ VIT– VIT+
2
VO
V

0
–3 –2 –1 0 1 2 3 4 5
VI – Input Voltage – V

Figure 6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7

MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

TYPICAL CHARACTERISTICS†

INPUT THRESHOLD VOLTAGE INPUT THRESHOLD VOLTAGE

vs vs
FREE-AIR TEMPERATURE SUPPLY VOLTAGE

ÎÎÎÎ
2.4 2
’89A VIT+
2.2 1.8
V IT – Input Threshold Voltage – V

1.6
ÎÎÎ

V IT – Input Threshold Voltage – V

2

ÎÎÎ
’89A VIT+
1.8 1.4 ’89 VIT–

ÎÎÎ
ÎÎÎ
1.6 1.2
’89 VIT+

ÎÎÎÎ
1.4 ’89 VIT+ 1
’89A VIT–
1.2 ’89 VIT– 0.8

1 0.6

0.8 ’89A VIT– 0.4

0.6 0.2

0.4 0
– 100 – 75 – 50 – 25 0 25 50 75 100 125 150 2 3 4 5 6 7 8 9 10
TA – Free-Air Temperature – °C VCC – Supply Voltage – V

Figure 7 Figure 8

SN75189 SN75189A

ÎÎÎÎ
NOISE REJECTION NOISE REJECTION

ÎÎÎÎ
6 6
VCC = 5 V VCC = 5 V

ÎÎÎÎÎ ÎÎÎÎ
TA = 25°C TA = 25°C
See Note A

ÎÎÎÎÎ
ÁÁÁÁ ÎÎÎÎÎ
5 See Note A 5

ÎÎÎÎÎ
ÁÁÁÁ
CC = 300 pF
CC = 300 pF

ÎÎÎÎÎ
ÁÁÁÁ ÁÁÁÁÁ
ÎÎÎÎÎ
4 4
Amplitude – V
Amplitude – V

CC = 500 pF

3 3

ÁÁÁÁ ÁÁÁÁÁ
ÎÎÎÎÎ CC = 500 pF

ÁÁÁÁ
CC = 12 pF

ÁÁÁÁ ÎÎÎÎÎ
ÁÁÁÁ
2 2

ÁÁÁÁ
ÁÁÁÁ ÎÎÎÎÎ
ÁÁÁÁ
CC = 10 pF CC = 100 pF

ÁÁÁÁ
1 CC = 100 pF 1

0 0
10 40 100 400 1000 4000 10000 10 40 100 400 1000 4000 10000
tw – Pulse Duration – ns tw – Pulse Duration – ns
NOTE A: Maximum amplitude of a positive-going pulse that, NOTE A: Maximum amplitude of a positive-going pulse that,
starting from 0 V, will not cause a change in the starting from 0 V, will not cause a change in the
output level. output level.

Figure 9 Figure 10
† Data for free-air temperatures below 0°C and above 70°C are applicable to SN55189 and SN55189A circuits only.

8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998

TYPICAL CHARACTERISTICS
INPUT CURRENT
vs
INPUT VOLTAGE
10
ÎÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎÎ
VCC = 5 V
8

ÎÎÎÎÎ
Control Open
TA = 25°C
6

IIII – Input Current – mA 4

–2

–4

–6

–8

–10
– 25 – 20 –15 –10 – 5 0 5 10 15 20 25
VI – Input Voltage – V

Figure 11

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9

 PACKAGE OPTION ADDENDUM
[Link] 4-Mar-2005

PACKAGING INFORMATION

Orderable Device Status (1) Package Package Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Type Drawing Qty
5962-86888022A ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
5962-8688802CA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
5962-8688802DA ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
MC1489AN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU Level-NC-NC-NC
(RoHS)
MC1489N ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU Level-NC-NC-NC
(RoHS)
SN55189AJ ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
SN55189J OBSOLETE CDIP J 14 None Call TI Call TI
SN75189AD ACTIVE SOIC D 14 50 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SN75189ADR ACTIVE SOIC D 14 2500 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SN75189AN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU Level-NC-NC-NC
(RoHS)
SN75189ANSLE OBSOLETE SO NS 14 None Call TI Call TI
SN75189ANSR ACTIVE SO NS 14 2000 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SN75189D ACTIVE SOIC D 14 50 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SN75189DR ACTIVE SOIC D 14 2500 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SN75189N ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU Level-NC-NC-NC
(RoHS)
SN75189NSR ACTIVE SO NS 14 2000 Pb-Free CU NIPDAU Level-2-260C-1 YEAR/
(RoHS) Level-1-235C-UNLIM
SNJ55189AFK ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
SNJ55189AJ ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC
SNJ55189AW ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC
SNJ55189FK OBSOLETE LCCC FK 20 None Call TI Call TI
SNJ55189J OBSOLETE CDIP J 14 None Call TI Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.

(2)
Eco Plan - May not be currently available - please check [Link] for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.

(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder

Addendum-Page 1
 PACKAGE OPTION ADDENDUM
[Link] 4-Mar-2005

temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.

Addendum-Page 2
 MECHANICAL DATA

MLCC006B – OCTOBER 1996

FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER

28 TERMINAL SHOWN

NO. OF A B
18 17 16 15 14 13 12
TERMINALS
** MIN MAX MIN MAX

0.342 0.358 0.307 0.358

19 11 20
(8,69) (9,09) (7,80) (9,09)
20 10 0.442 0.458 0.406 0.458
28
(11,23) (11,63) (10,31) (11,63)
21 9
B SQ 0.640 0.660 0.495 0.560
22 8 44
(16,26) (16,76) (12,58) (14,22)
A SQ
23 7 0.739 0.761 0.495 0.560
52
(18,78) (19,32) (12,58) (14,22)
24 6
0.938 0.962 0.850 0.858
68
(23,83) (24,43) (21,6) (21,8)
25 5
1.141 1.165 1.047 1.063
84
(28,99) (29,59) (26,6) (27,0)
26 27 28 1 2 3 4

0.020 (0,51) 0.080 (2,03)

0.010 (0,25) 0.064 (1,63)

0.020 (0,51)
0.010 (0,25)

0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)

0.028 (0,71) 0.045 (1,14)

0.022 (0,54) 0.035 (0,89)
0.050 (1,27)

4040140 / D 10/96

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

 IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:

Products Applications
Amplifiers [Link] Audio [Link]/audio
Data Converters [Link] Automotive [Link]/automotive
DSP [Link] Broadband [Link]/broadband
Interface [Link] Digital Control [Link]/digitalcontrol
Logic [Link] Military [Link]/military
Power Mgmt [Link] Optical Networking [Link]/opticalnetwork
Microcontrollers [Link] Security [Link]/security
Telephony [Link]/telephony
Video & Imaging [Link]/video
Wireless [Link]/wireless

Mailing Address: Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

Copyright  2005, Texas Instruments Incorporated

This datasheet has been download from:

[Link]

Datasheets for electronics components.