11.
SANITARY EQUIPMENT (FIXTURES)
Work discription Unit Qnty Rte Amount/birr
11 All fixtures which differs from that specified below is
subject to the owner's approval, based on
samples,catalogues and brochures presented by the
Contractor. Unit Price shall include all the necessary
fixing brackets or hooks and all the necessary assistance
civil works such as chiseling of walls,floors, beams and
11.1 Supply and fix hand wash basins(AQCUA),with chrome
plated cold water tap made of white vitreous china,
complete with plug, chrome plated chain holder, P-smell No 28.00 8750.00 245,000.00
trap with connection pipe and with all other necessary
accessories.
Supply and fix white vetrious china wash down water
11.2 closets WC with plastic seat and cover including low
flush cistern. Complete with all necessary No 15.0 12500.00 187,500.00
accessories./AQCUA/
11.3 Supply and fix toilet paper holder with chrome plated
brass wall flanged roll with chrome plated fastening No 15.0 1250.0 18,750.00
screws and other accessories(AQCUA)
11.4 Supply and fix crystal glass mirrors for toilets and wash
basins with copper back protection, size: 500/400 mm No 25.0 800.0 20,000.00
including chrome plated brass mirror clips with chrome
plated screws and etc.
11.5 Supply and fix shower plate made of enamelled cast iron
orequivalent including shower head with lever action cold
and hot water mixing battery of approved quality, No 16.00 5200.00 83,200.00
complete with all connecting pieces and P-smell tra on
the drainage system. Size 1700*700mm
11.6 Supply and fix single tubular chrome plated towel rail for
bath tub washs and showers with chrome plated fastening No 16.0 780.0 12,480.00
screws. Complete with all necessary acccessories.
11.7 Supply and fix,AQCUA soap holder in white vitreous
china. Complete with the necessary fixing and other No 25 1200 30,000.00
accessories for hand wash basins and shower.
11.8 with
Supply and fix
double stainless
bowl steel
as where kitchen
shown anddrawing.
on the pantry sinks
Complete with cold and hot water lever action
[controlled] mixer, chrome plated chain, plug,chrome No 2.0 5100.0 10,200.00
plated faucet, P-smell trap and with all necessary
### Supply and fix water heater of approved quality, complete
with insulation, one way valve, chrome gate valves on
cold and hot water connection pipes and safety valves
includingall fixing accessories
Capcity : 80 liter No 2.0 27000.0 54,000.00
Capcity : 50 liter No 16 18000 288,000.00
### Supply and fix floor drains made of polished steel of
approved quality, complete with P-smell trap and all other
necessary fittings and accessories.
Size:- Dia.50 No 15 630 9,450.00
Dia.80 No 2 750 1,500.00
11 Water Supply Pipes and Valves
Internal cold and hot Water supply Piping through
ceilings, walls and below slab as where shown on the
drawings.
11.2.1 Supply and install polypropylene random Co-polymer
resins(PP type 3 raw material)PPR PN-20 to internal
water distribution system complete with necessary
accessories.
a) dia. 32mm ml 145 650.00 94,250.00
b) dia. 25mm ml 210 380.00 79,800.00
c) Dia. 20mm ml 275 350.00 96,250.00
d) Dia. 15mm ml 250 300.00 75,000.00
11.2.3 Supply, fix, test, and commission European standard
(manufactured)service valves on the water supply pipe
before sanitary appliances including accessories, all as
shown on the drawings.
Dia. 20 mm(chrom plated) No 18 550.00 9,900.00
11.2.4 Ditto to above, but approved quality bronze gate valves
on pipe lines above ceiling , internal branch water pipes
and on pipe entrance to the building of the following sizes
and as where shown on the drawing.
a) dia.20mm No 25 480 12,000.00
b) dia.32mm No 8 650 5,200.00
c) dia.40mm No 0 0
11.3
Waste, Vent and Sorm water pipes & Accesessaries.
All domestic waste, vent and storm water pipe lines
shall be uPVC pipes and shall be provided with a
minimum slope of 1.5% towards the outlet unless
specified. All uPVC pipes and necessary fittings shall
be standard quality ,
and be free from
construction damage
etc. Unit during
price shall storage,
include transportation,
all the
necessary
assistance civil works, such as excavation cartaway,
fixing
or hanging to walls, beams or slabs etc., and necessary
fittings such as bends, Y, T, etc. Storm water uPVC
shall resist the external temperature and the quality shall
meet the purpose.
11.3.1
Supply and lay internal UPVC PN4 waste and vent pipes
according to where shown on the drawings, complete
with
all the necessary fittings.
Dia. 50 mm ml 195 120.32 23,462.40
" 110 " ml 275 148.19 40,752.25
" 150 " ml 150 266.20 39,930.00
11.3.2 connected
Supply andtoinstall ventterminal
the roof caps made of rigid
of vent pipePVC to beon
as shown
the
riser diagram, complete with all the necessary sealings,
gaskets to roof water proofing membrane including
stainless
steel screws/as required and all other accessories.
Dia. 80 mm No 5 72.11 360.55
11.3.3 Supply and lay approved quality storm water UPVC PN-
4 down pipes set on concrete according to where shown
on the drawings. Price shall include all the necessary
connecting pieces.
Dia. 110 mm ml 195 148.19 28,897.05
11.3.4 Supply, install and commission water meter of approved
quality with gate valves before and after water meter as
where shown on the drawing.
Dia.1 1/2"mm No 1 10500 10,500.00
11.6
Supply and install GS pipe for fire extingusher as shown ml 0 0.00
on the drawings
11.7 No 4 2544.90 10,179.60
9kg fire extingusher
11.5
Water storage tankers and pumps
Supply and install fiber glass ground water Tank 8m3
10.4.8 capacity. Price shall included all necessary accessories. No 1.00 48,000.00 48,000.00
Supply and install approved quality Elevated water Tank
4m3 capacity.
Price shall
10.4.9 supply included
and fix all necessary
approved accessories.
quality electric driven centrifugal No 1.00 18,500.00 18,500.00
domestic water pump as per the manufacturer's
instruction,technical specification and drawing
shown,(duty and stand -by) with all other necessary
fittings and accesesories.
Discharge capacity,Q=3liters/second, H=40meters,
estimated power 3.2kw Set 1 32000 32000
supply and fix approved quality garden tap complet with
gate valves and other necessary accesaries and fittings.
Dia.20mm No 3 450 1350
Water Proofing Works
suuply and install TESTIDO or equvalenet 4mm thick
bitumen plastometric water proofing manufactured from
a rich mixture of bitumen and selected polymer blended
togather to obtain excellent heat and UV resistant
membrane type water proofing as manufacturer's
instruction for all suspended and terace slabs and water
tank slabs. m2 0 0 0
cold water pipes shall be high density polyethylene
(HDPE),PN-10 pipes and laid in trench as shown in the
[Link] 10cm thick sand beding material,and
15mm thick approved material to cover the pipe laied in
[Link] includes all necessary civil works
accesesaries and pipe fittings.
Supply and install HDPE-pipes PN-10to site water supply
systems including necessary accesaries.
Dia.20mm ml 60
11.4 construct sewerage manholes for sewerage pipe
maintainance as per the detail drawing and use the
construction material justified on the [Link] shall
No 7 4500 31,500.00
included excavation, cart awy,fill,reforcment and other
necessary incidental works
Construct Standared Massonary septic tank Internal
Dimension (L x W x D) as per the sanitary and structural No 1
detail drawing Price shall included excavation, cart
awy,fill,reforcment and other necessary incidental works 145,000.00 145,000.00
sub total 1,517,911.85
