RCON CRETE
RCON CRETE- ACRYLIC MODIFIED EMULSION & WATERPROOF ADDITIVE FOR MORTAR/CONCRETE/PUTTY
DESCRIPTION
RCON CRETE is an acrylic emulsion which when added to cement mortar/concrete/ provides good
adhesion, water resistance and improvement of other properties. It is available in form of a milky liquid.
FEATURES & BENEFITS AREAS OF APPLICATION
*Extremely good adhesion RCON CRETE is a high quality emulsion that substantially increases
*Reduced Shrinkage the quality of cement mortars/concrete/grouts/putty for:
*Greater Elasticity *Rendering & Coating
*Excellent oil and water resistance * Jointing
*Increased abrasion resistance * Repair & adhesive mortar
*Improved chemical resistance * Roof finishing
*Improved UV resistance * Waterproof rendering
* Cement injection mix
SUBSTRATE PREPRATION
Concrete surfaces should be sound & clean, free from oil, grease, cement laitance & loosely adhering particles.
Absorbent surfaces should be saturated thoroughly with water but without showing any puddle on their surfaces.
Application Instructions
Mixing of RCON CRETE to cement mortar/concrete should preferably be done manually. When a concrete mixer
is used, pour the mortar as soon as its consistency is cohesive. Do not run the mixer too long.
Aggregates:
Aggregates used in the mortar/concrete should be well graded and thoroughly washed. Sand particles sizes
should correspond to the thickness of mortar to be applied.
Thickness of Mortar Particle Size
5 mm 0-2 mm
6-15 mm 0-3 mm
Over 15 mm 0-5 m
APPLICATION METHOD/TOOLS
1. Masonry Joining:
Make a firm mortar with fine sand & cement using RCON CRETE: Water=1:8. Impregnate the area with
primer coat. Prepare the base as indicated above. While the prime is wet, apply the mortar and
immediately finish or reshape the surface as required.
2. Bonding Successive Concrete Casts:
Wash the surface with high-pressure jet. Prepare a pasty mortar with RCON CRETE: Water=1:8 by volume.
Apply this mortar onto the surface in a layer of 23-30 mm thickness. Pour fresh concrete after about an
hour. Vibrate carefully to achieve satisfactory interpretation of mortar and concrete .
3. For wall/putty application:
Mix RCON CRETE in 1:1.6: in putty to make workable paste. No water is to be used.
Use freely to cover wall and finalize.
ANIRA CHEMICALS PVT. LTD.
RCON CRETE
TECHNICAL INFORMATION
Appearance / Colour Milky white liquid
Chemical Base Acrylic Dispersion
Density 103 kg / at 27 C
Solid Content 40%
pH >7
Substrate Temperature : +15 C min. / +40 C max.
Ambient Temperature : +15 C min. / +40 C max.
PACKAGING
1 Ltr., 5Ltr. & 10Ltr.
SHELF LIFE & STORAGE:
12 Months from the date of production if stored in undamaged & unopened, original sealed packaging,
in dry condition & protected from direct sunlight. Protect from frost.
Warranty Disclaimer:
The technical data given herein has been compiled for the help and the guidance of the metal pretreatment personnel and is
based upon our experience and knowledge. However as we have no control over the way chemicals are used no warranty
express or implied is intended or given. We assume no responsibility whatsoever for coverage, performance or damages,
including injuries resulting from use of this information or of products recommended herein.
ANIRA CHEMICALS PVT. LTD.
