Scribd
Upload
10 views1 page

Computer Link Parameter

The document outlines various computer link parameters used for communication settings, including baud rate, stop bits, parity, character length, and handshake options. Each parameter is defined with its data type, read/write status, and acceptable range of values. Additionally, it includes standard Mitsubishi M70/M80 commands and specifies the document version and contact information for Inventcom.

Uploaded by

Majid Rakhshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

Computer Link Parameter

The document outlines various computer link parameters used for communication settings, including baud rate, stop bits, parity, character length, and handshake options. Each parameter is defined with its data type, read/write status, and acceptable range of values. Additionally, it includes standard Mitsubishi M70/M80 commands and specifies the document version and contact information for Inventcom.

Uploaded by

Majid Rakhshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

inventcom

Computer Link parameter


Command Data type Description PS AX RW Range
M_SSEC_UPHLNK_LBAUT T_CHAR Baud rate -- -- RW 0 to 8
M_SSEC_UPHLNK_LSTOPBT T_CHAR Stop bit -- -- RW 1 to 3
M_SSEC_UPHLNK_LPRITYB T_CHAR Parity effective -- -- RW 0,1
M_SSEC_UPHLNK_LPRITYA T_CHAR Even parity -- -- RW 0,1
M_SSEC_UPHLNK_LLENGTH T_CHAR Character length -- -- RW 2 to 3
M_SSEC_UPHLNK_LHAND T_CHAR Hand shake -- -- RW 0 to 3
M_SSEC_UPHLNK_LTIMOUT T_SHORT Time-out set -- -- RW 0 to 999
M_SSEC_UPHLNK_LCDMOD T_CHAR Data code -- -- RW 0,1
M_SSEC_UPHLNK_LPARA1 T_CHAR Link parameter 1 -- -- RW 0x00 to 0xFF
M_SSEC_UPHLNK_LPARA2 T_CHAR Link parameter 2 -- -- RW 0x00 to 0xFF
M_SSEC_UPHLNK_LPARA3 T_CHAR Link parameter 3 -- -- RW 0x00 to 0xFF
M_SSEC_UPHLNK_LPARA4 T_CHAR Link parameter 4 -- -- RW 0x00 to 0xFF
M_SSEC_UPHLNK_LPARA5 T_CHAR Link parameter 5 -- -- RW 0x00 to 0xFF
M_SSEC_UPHLNK_LSTCODE T_CHAR Start code -- -- RW 0,1
M_SSEC_UPHLNK_LCODOUT T_CHAR Control code output -- -- RW 0,1
M_SSEC_UPHLNK_LLNKTMR T_SHORT Control code interval -- -- RW 21 to 255(Not used )
M_SSEC_UPHLNK_LWAITM T_SHORT Wait time -- -- RW 0 to 255(Not used )
M_SSEC_UPHLNK_LPCKLEN T_SHORT Packet length -- -- RW 0 to 3(Not used )
M_SSEC_UPHLNK_BUFFSIZE T_LONG Buffer size -- -- RW 248 to 32768
M_SSEC_UPHLNK_STARTSIZE T_LONG Start size -- -- RW 248 to 32768
M_SSEC_UPHLNK_DC1_OUTSIZE T_LONG DC1 output size -- -- RW 248 to 32768
M_SSEC_UPHLNK_LPOLLTM T_SHORT Polling timer -- -- RW 0 to 999(Not used )
M_SSEC_UPHLNK_LTRNSTM T_CHAR Transfer wait time -- -- RW 0 to 100(Not used )
M_SSEC_UPHLNK_LRTRYTM T_CHAR Retry counter -- -- RW 1 to 100(Not used )

STANDARD MITSUBISHI M70/M80 COMMANDS


Inventcom · www.inventcom.net · [email protected]
Version: March 2024 V1.4
Page 1 of 1

You might also like