Scribd
Upload
12 views4 pages

Coolant Pump G2032279

This document outlines the removal and installation procedure for the coolant pump in a 2022 Ranger with a 2.3L EcoBoost engine. It includes detailed steps for draining the cooling system, removing components, and ensuring proper installation with torque specifications. The document emphasizes the importance of cleanliness and inspection of seals during the process.

Uploaded by

pkyaw1256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views4 pages

Coolant Pump G2032279

This document outlines the removal and installation procedure for the coolant pump in a 2022 Ranger with a 2.3L EcoBoost engine. It includes detailed steps for draining the cooling system, removing components, and ensuring proper installation with torque specifications. The document emphasizes the importance of cleanliness and inspection of seals during the process.

Uploaded by

pkyaw1256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

303-03Â Engine Cooling - 2.

3L EcoBoost (201kW/273PS) 2022 Ranger


Removal and Installation Procedure revision date: 03/8/2019

Coolant Pump

Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Drain the cooling system.
Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS), General Procedures).
2. Remove the upper cooling fan shroud.
Refer to: Cooling Fan Upper Shroud (303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS), Removal and Installation).
3. Loosen the coolant pump pulley bolts.

Â
Â
Â
Â
Â
Â

4. Remove the accessory drive belt.


Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.3L EcoBoost (201kW/273PS), Removal and Installation).
5. Remove the bolts and the coolant pump pulley.

Â
Â
Â
Â
Â
Â

6. NOTE: Make sure that the mating faces are clean and free of foreign material.
Remove the bolts and the coolant pump.
Â
Â
Â
Â
Â
Â

7. Inspect the O-ring seal and replace if necessary.

Â
Â
Â
Â
Â
Â

Installation
1. Lubricate the O-ring seal with clean engine coolant.
Refer to: Specifications (303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS), Specifications).

Â
Â
Â
Â
Â
Â

2. NOTE: Make sure that the mating faces are clean and free of foreign material.
Install the coolant pump and the bolts.
Torque: 93 lb.in (10.5 Nm)
Â
Â
Â
Â
Â
Â

3. Position the coolant pump pulley and install the bolts finger tight.

Â
Â
Â
Â
Â
Â

4. Install the accessory drive belt.


Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.3L EcoBoost (201kW/273PS), Removal and Installation).
5. Tighten the coolant pump pulley bolts.
Torque: 177 lb.in (20 Nm)
Â
Â
Â
Â
Â
Â

6. Install the upper cooling fan shroud.


Refer to: Cooling Fan Upper Shroud (303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS), Removal and Installation).
7. Fill and bleed the cooling system.
Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS), General Procedures).

You might also like