Page 1/5
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.04.2018 Version number 6 Revision: 16.02.2018
* SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: SETAVIN RCO
· Article number: 1253/6
· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
· Application of the substance / the mixture Textile auxiliary
· 1.3 Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
ZSCHIMMER & SCHWARZ
MOHSDORF GMBH & CO KG Tel.: +49 (0) 3724/67-0
Chemnitztalstrasse 1 Fax.: +49 (0) 3724/14600
D - 09217 Burgstädt [Link]@[Link]
· Information department: Development Dept. for Textile Auxiliaries
· 1.4 Emergency telephone number:
Emergency Contact (24-Hour-Number): GBK GmbH +49 (0)6132-84463
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008 Void
· Hazard pictograms Void
· Signal word Void
· Hazard statements Void
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Mixtures
· Description: Combination of on nitrogen derivative with poly carboxylic acids and inorganic salts
· Dangerous components: Void
SECTION 4: First aid measures
· 4.1 Description of first aid measures
· General information No special measures required.
· After inhalation Supply fresh air; consult doctor in case of complaints.
· After skin contact Immediately wash with water and soap and rinse thoroughly.
· After eye contact Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing
Rinse out mouth thoroughly
If symptoms persist consult doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
GB
(Contd. on page 2)
46.0.12
Page 2/5
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.04.2018 Version number 6 Revision: 16.02.2018
Trade name: SETAVIN RCO
(Contd. of page 1)
SECTION 5: Firefighting measures
· 5.1 Extinguishing media
· Suitable extinguishing agents
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· 5.2 Special hazards arising from the substance or mixture None
· 5.3 Advice for firefighters
· Protective equipment: No special measures required.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures
Observe the usual precautions when handling chemicals
· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of the material collected according to regulations.
· 6.4 Reference to other sections No dangerous substances are released.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handling No special measures required.
· Information about protection against explosions and fires: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: None.
· Storage class 12
· 7.3 Specific end use(s) No further relevant information available.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical systems: No further data; see item 7.
· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
· Additional information: The lists that were valid during the creation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
The usual precautionary measures should be adhered to when handling chemicals.
· Protection of hands: Protective gloves.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
Nitrile rubber, NBR
PVC gloves
Recommended thickness of the material: ≥ 0.5 mm
· Penetration time of glove material
Value for the permeation: Level ≤ 6
The determined penetration times according to EN 374 part III are not performed under practical conditions.
Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
(Contd. on page 3)
GB
46.0.12
Page 3/5
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.04.2018 Version number 6 Revision: 16.02.2018
Trade name: SETAVIN RCO
(Contd. of page 2)
· Eye protection: Safety glasses
· Body protection: Light weight protective clothing
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Fluid
Colour: Brown
· Odour: Ammonia-like
· pH-value at 20 °C: 8
· Change in condition
Melting point/freezing point: undetermined
Initial boiling point and boiling range: ca.100 °C
· Flash point: Not applicable
· Self igniting: Product is not selfigniting.
· Explosive properties: Product does not exhibit an explosion hazard.
· Density at 20 °C: 1.08 g/cm³
· Solubility in / Miscibility with
Water: unlimited miscible
· Viscosity:
dynamic at 20 °C: < 100 mPas
· 9.2 Other information No further relevant information available.
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions No dangerous reactions known.
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products:
In case of correct handling and storage no decomposition will occur.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects
· Acute toxicity Based on available data, the classification criteria are not met.
· LD/LC50 values that are relevant for classification:
(Toxicity figures are calculated from particulars of the single components)
LD50: > 2000 mg/kg (rat)
· Primary irritant effect:
· Skin corrosion/irritation Based on available data, the classification criteria are not met.
· Serious eye damage/irritation Based on available data, the classification criteria are not met.
· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity Based on available data, the classification criteria are not met.
(Contd. on page 4)
GB
46.0.12
Page 4/5
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.04.2018 Version number 6 Revision: 16.02.2018
Trade name: SETAVIN RCO
(Contd. of page 3)
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity
· Aquatic toxicity:
(Toxicity figures are calculated from particulars of the single components)
LC50 > 200 mg/l 96h OECD 203
· 12.2 Persistence and degradability No further relevant information available.
· Other information:
Eliminability: < 70 %
Method of analysis: DOC decrease
Method:OEDC 302B / ISO 9888 / EEC 88/302C
This statement was deduced from products with a similar structure or composition.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· Ecotoxical effects:
· Remark: COD-value: 110 mg/g DIN 38409 H41
· Additional ecological information:
· General notes:
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods
· Recommendation Disposal must be made according to official regulations
· Uncleaned packagings:
· Recommendation:
Contaminated packagings should be emptied thoroughly. They can be recycled after thorough and proper
cleaning.
* SECTION 14: Transport information
· 14.1 UN-Number
· ADR, ADN, IMDG, IATA Void
· 14.2 UN proper shipping name
· ADR, ADN, IMDG, IATA Void
· 14.3 Transport hazard class(es)
· ADR, ADN, IMDG, IATA
· Class Void
· 14.4 Packing group
· ADR, IMDG, IATA Void
· 14.5 Environmental hazards:
· Marine pollutant: No
(Contd. on page 5)
GB
46.0.12
Page 5/5
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 20.04.2018 Version number 6 Revision: 16.02.2018
Trade name: SETAVIN RCO
(Contd. of page 4)
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II of
Marpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· National regulations
· Water hazard class:
· Manufacturers' self-imposed commitment to classify textile auxiliaries according to their relevance for
water pollution (TEGEWA, TVI)
Abwasserrelevanzstufe (ARS): II
(level of relevance to waste water - Germany)
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
· Department issuing SDS: Development Dept. for Textile Auxiliaries
· Contact: Katja Wenke & Dr. Claudia Hemeltjen
· Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organisation
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonised System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
· * Data compared to the previous version altered.
GB
46.0.12