Scribd
Upload
2K views3 pages

Me17 9 11

The document provides instructions for performing an 'IMMO OFF' procedure on Hyundai and Kia vehicles using various ECU models. It details the steps for reading and writing EEPROM memory, including the necessary pin code and connections for the S.O.S Emulator. The emulator simplifies the process by automatically recognizing the ECU type without requiring jumper adjustments.

Uploaded by

Cristhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views3 pages

Me17 9 11

The document provides instructions for performing an 'IMMO OFF' procedure on Hyundai and Kia vehicles using various ECU models. It details the steps for reading and writing EEPROM memory, including the necessary pin code and connections for the S.O.S Emulator. The emulator simplifies the process by automatically recognizing the ECU type without requiring jumper adjustments.

Uploaded by

Cristhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

HYUNDAI / KIA - IMMO OFF



• BOSCH EDC15C7 • KEFICO M7.9.x • ME17.9.11.1


• BOSCH EDC 17 C08 • KEFICO ME7.9.8 • ME17.9.21.X
• BOSCH EDC17C53 • SIEMENS SIMK41 • MED17.9.8
• BOSCH EDC17C57 • SIEMENS SIMK43 • MEG17.9.12 KEFICO
• BOSCH EDC17CP14 • SIEMENS SIM2K-47 • MEG17.9.13 KEFICO
• BOSCH EDC16C39 • CPGPSH2.14.1 • MEG17.9.21
• BOSCH EDC17C08 • CPEGP2.10.1 • DELPHI DCM3.7AP
• BOSCH M7.9.x • CPEGD2.20.4 • DELPHI TRW DDCR
• BOSCH ME7.9.8 • MT38
• BOSCH ME17.9.21.1
AN D OTHER...

CODE
GND
EEPROM 24C02 +12V

HYUNDAI KIA ECU EMULATOR


Note: PCF7936 transponder works on Smartra
1-2-3 model vehicles, hitag2 keyed, ecu models.

Manual Coding: Ecu. To do the programming you need to have the


following information: ecu's pin code.
Pin code example: 112233. Remove the 24c02 eeprom in the emulator and write
00 on the f irst line and then write the pin code (example 00112233)
HYUNDAI / KIA IMMO OFF
ME 17.9.11
CONNECTION

5 79 80

3 57

30

18

PIN 5, 30 - 12V (30) PIN 18 - 12V (15) PIN 3 - GND PIN 57 - CAN H PIN 79 - CAN L

PIN 80 - CONNECT GREEN WIRE FROM EMULATOR TO ECU PCB AND CUT THIS PIN FROM CAR

1 Find the EEPROM memory on the ECU.

Unsolder the eeprom memory and read its content.

2 Read the EEPROM memory and find


(pin code) as shown in the example
on the right.

3 Remove 24C02 memory from S.O.S Emulator

4 Write the values from Step 2 into the


24C02 memory unsoldered from S.O.S Emulator:

Addresses: Text section (see picture)


Values: Values from Step 2.

Solder the memory back into S.O.S Emulator.

The emulator automatically recognizes the brand and the type of the engine ECU.
It does not require the picking of any jumpers, which is what differentiates it amongst other emulators!

Page 1
00000000 00 xx xx xx
00000010
00000020
00000030
00000040
00000050
00000060
00000070
00000080
00000090

ATTENTION: When writing the pin code of the eeprom


memory, do not forget to add 00 to the first line.

5 Solder back the 24C02 memory

CODE
GND
+12V

6 Connect S.O.S Emulator to ECU according to the diagram.

CONNECTION

5 79 80

3 57

30

18

PIN 5, 30 - 12V (30) PIN 18 - 12V (15) PIN 3 - GND PIN 57 - CAN H PIN 79 - CAN L

PIN 80 - CONNECT GREEN WIRE FROM EMULATOR TO ECU PCB AND CUT THIS PIN FROM CAR

Page 2

You might also like