Scribd
Upload
253 views1 page

SHS 100x100x5

The document provides detailed cross-section properties for a square hollow section (SHS) with dimensions 100x100x5 mm. Key properties include a sectional area of 18.40 cm², a bending area moment of inertia about the y-axis of 271.00 cm⁴, and a weight of 14.4 kg/m. Additional information includes plastic and torsional properties, as well as ultimate resistance to axial force of 431.282 kN.

Uploaded by

Amrish Tyagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
253 views1 page

SHS 100x100x5

The document provides detailed cross-section properties for a square hollow section (SHS) with dimensions 100x100x5 mm. Key properties include a sectional area of 18.40 cm², a bending area moment of inertia about the y-axis of 271.00 cm⁴, and a weight of 14.4 kg/m. Additional information includes plastic and torsional properties, as well as ultimate resistance to axial force of 431.282 kN.

Uploaded by

Amrish Tyagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

 Cross-Section Properties

SHS 100x100x5
Geometry
Depth h 100.0 mm
SHS 100x100x5
 --
Thickness t 5.0 mm
 Macsteel
Outer corner radius ro 10.0 mm 100.0

Inner corner radius ri 5.0 mm


Depth of straight portion of web d 80.0 mm 5.0

5.0

Sectional Area
A

100.0
Sectional area 18.40 cm
y

Bending
Area moment of inertia about y-axis Iy 271.00 cm
Polar area moment of inertia Ip 542.00 cm
Radius of gyration about y-axis iy 38.4 mm z

Polar radius of gyration ip 54.3 mm

Maximum statical moment of area about y-axis max Sy 16.14 cm


Elastic section modulus about y-axis Wy 54.20 cm

Shear
Shear area in y-direction Ay 8.05 cm

Torsion
Torsional constant It 441.00 cm
Torsional constant (St. Venant) It,StVen 1.53 cm
Torsional constant (Bredt) It,Bredt 439.47 cm
Secondary torsional constant It,s 1.25 cm
Section modulus for torsion Wt 81.72 cm

Warping
Warping ordinate with respect to shear center max ω 0.56 cm
Warping constant with respect to shear center Iω 2.06 cm
Warping radius of gyration with respect to shear center iω 0.6 mm

Warping section modulus with respect to shear center Wω 3.67 cm


Maximum warping statical moment with respect to shear center max Sω 0.42 cm

Plasticity
Plastic section modulus about y-axis W pl,y 64.50 cm
Plastic section modulus of webs about y-axis W pl,y,webs 16.00 cm
Plastic section modulus of flanges about z-axis W pl,z,flanges 25.00 cm
Plastic shape factor about y-axis αpl,y 1.190 --

Plastic shear area in y-direction Apl,y 9.50 cm


Plastic limiting axial force Npl 431.282 kN

Plastic limiting shear force in y-direction


Vpl,y 128.893 kN

Plastic limiting bending moment about y-axis Mpl,y 15.17 kNm

Other
Ultimate resistance to axial force Nu 431.282 kN
Weight G 14.4 kg/m
Surface area per unit length Am 0.383 m /m
Volume V 1840.00 cm /m
Section factor Am/V 208.061 1/m

Cell area Acell 89.77 cm

You might also like