4.

Instrument Cluster

Instrument cluster ...........................................................................................................4-2

Instrument cluster control...........................................................................................4-3
Gauges and meters......................................................................................................4-3
Transmission shift indicator ........................................................................................ 4-7
Warning and indicator lights....................................................................................... 4-7
Cluster display messages.......................................................................................... 4-19
Cluster display (Type A) ................................................................................................4-23
Cluster display control............................................................................................... 4-23
Cluster display modes ...............................................................................................4-24
User settings mode....................................................................................................4-26
Trip computer.............................................................................................................4-33 4
Cluster display (Type B) ................................................................................................4-35
Cluster display control...............................................................................................4-35
View modes................................................................................................................4-36
Vehicle settings (infotainment system) .......................................................................4-39
Setting your vehicle ...................................................................................................4-39
Instrument Cluster

Instrument cluster
Conventional cluster (Type A)

OCN7043096L

Full LCD cluster (Type B)

OCN7040002
The actual cluster in the vehicle may differ from the illustration.
For more information, refer to the "Gauges and meters" in this chapter.

(1) Tachometer
(2) Speedometer
(3) Engine coolant temperature gauge
(4) Fuel gauge
(5) Warning and indicator lights
(6) Cluster display (including trip computer)

4-2
 4
Instrument cluster control Gauges and meters

Adjusting instrument cluster Speedometer

illumination Type A

OCN7043101L
OCN7040081N
Type B
When the vehicle's parking lights or
headlights are on, press the illumination
control button to adjust the brightness of
the instrument panel illumination.
When pressing the illumination control
button, the interior switch illumination
intensity is also adjustable.
• The brightness of the instrument panel
illumination is displayed.
• When the brightness setting reaches
either the minimum or maximum level,
OCN7040005
a chime sounds.
The speedometer indicates the speed of
WARNING the vehicle and is calibrated in kilometers
per hour (km/h) or miles per hour (MPH).
Never adjust the instrument cluster while
driving to prevent death, serious injury, or
vehicle damage.

4-3
Instrument Cluster

Tachometer Engine coolant temperature gauge

Type A Type A

OCN7043102L OAX041005
Type B Type B

OCN7040007 OCN7040009

The tachometer indicates the The engine coolant temperature gauge

approximate number of engine indicates the temperature of the engine
revolutions per minute (RPM). coolant when the ignition switch is in the
ON position.
Use the tachometer to select the correct
shift points and to prevent lugging and/or NOTICE
over-revving the engine.
If the gauge pointer moves beyond the
NOTICE normal range area toward the "H"
position, it indicates the engine coolant is
Do not operate the engine within the
overheating.
tachometer's RED ZONE to prevent
severe engine damage. Do not continue driving with an
overheated engine. If your engine
overheats, refer to the "If the engine
overheats" section in chapter 8.

4-4
 4
WARNING Information
Never remove the radiator cap or engine • The fuel tank capacity is given in
coolant reservoir cap when the engine is chapter 10.
hot. The engine coolant is under pressure • The fuel gauge is supplemented by a
and may cause burn or injury. Always use low fuel warning light, hat illuminates
a rag. when the fuel tank is nearly empty.
• On inclines or curves, the fuel gauge
pointer may fluctuate or the low fuel
Fuel gauge
warning light may come on earlier than
Type A
usual due to the movement of fuel in
the tank.

CAUTION
If the shift gear is not P (Park) or N
(Neutral) during refueling, the refueling
may not be recognized and the fuel
amount and distance to empty may be
displayed abnormally.
OAX041006
Type B
WARNING
Always refuel the vehicle as soon as
possible after the warning light comes on
or when the gauge indicator comes close
to E (Empty) level.

NOTICE
Avoid driving with an extremely low fuel
OCN7040011 level. Running out of fuel may cause the
The fuel gauge indicates the approximate engine to misfire and cause damage to
amount of fuel remaining in the fuel tank. the catalytic converter.

4-5
Instrument Cluster

Outside temperature gauge Odometer

Type A Type A

OCN7043105L OCN7043107L

Type B Type B

OCN7040012 OCN7040015

The outside ambient temperature The odometer indicates the total distance
appears in the lower portion of the cluster that the vehicle has been driven and is
display. The temperature reads in used to determine when periodic
Fahrenheit or Celsius depending on the maintenance is required.
units selected from the Settings menu in
the instrument cluster or infotainment
system.
The temperature indicated on the
instrument cluster may not change as
quickly as the outside temperature.
Select:
• User Settings > Units > Temperature
Unit > °C/°F (for cluster type)
• Setup > General > Units >
Temperature Unit > °C/°F (for
infotainment system type)
Both the temperature unit on the
instrument cluster and climate control
information screen is changed.

4-6
 4
Range • The distance to empty indicator may
Type A not change accurately if less than 6
liters (1.5 gallons) of fuel are added to
the vehicle.

Transmission shift indicator

Type A

OCN7043108L

Type B

OIG046112

Type B

OCN7040016

• The range is the estimated distance the

vehicle can be driven with the
remaining fuel.
• If the estimated distance is below 1 km
(1 mi.), the trip computer displays "----"
as range. When this occurs, refuel the
vehicle immediately. OCN7040013N

The transmission shift indicator in the

Information upper corner of the cluster display
• The range may differ from the actual indicates the current gear or P (Park).
driving distance because it is only an
estimate as it is an estimate of the
available driving distance. Warning and indicator lights
• The range may differ significantly Information
based on driving conditions, driving
habits, and condition of the vehicle. Make sure that all warning lights are OFF
after starting the engine. If any light is still
• If the vehicle is not on level ground or
ON, this indicates a situation that needs
the battery power has been
attention.
interrupted, the distance to empty
function may not operate correctly.

4-7
Instrument Cluster

Airbag warning light Parking brake & brake fluid warning

light

btn_W7-147
btn_W-128
This warning light illuminates:
• When the ignition switch is in the ON This warning light illuminates:
position. It illuminates for 3-6 seconds • When the ignition switch is in the ON
and then goes off. position. It illuminates for about 3
• When there is a malfunction with the seconds and then goes off once the
SRS. parking brake is released.
If the Airbag warning light remains • Whenever the parking brake is applied.
illuminated while driving, have the • Whenever the brake fluid level in the
vehicle inspected by an authorized reservoir is low.
HYUNDAI dealer. - If the warning light illuminates with
the parking brake released, it
Seat belt warning light indicates that the brake fluid level in
the reservoir is low.

If the brake fluid level in the reservoir is

btn_W-29 low:
This warning light informs the driver that 1. Drive carefully to the nearest safe
the seat belt is not fastened. location and stop your vehicle.
For more information, refer to the "Seat 2. With the engine stopped, check the
belts" section in chapter 3. brake fluid level immediately and add
fluid as required. For more information,
refer to the "Brake fluid" section in
chapter 9. After adding brake fluid,
check all brake components for fluid
leaks. If a brake fluid leak is found, or if
the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have the vehicle
inspected by an authorized HYUNDAI
dealer.

4-8
 4
Dual-diagonal braking system Anti-lock Brake System (ABS)
Your vehicle is equipped with the warning light
dual-diagonal braking systems. This
means you still have braking on two
wheels even if one of the dual systems
fails. btn_WDH-78

With only one of the dual systems This warning light illuminates:
working, more than normal pedal travel
and greater pedal force are required to • When the ignition switch is in the ON
stop the vehicle. position. It illuminates for about 3
seconds and then goes off.
Also, the vehicle does not stop in a short
distance if only a portion of the braking • Whenever there is a malfunction with
system is working. the ABS.
If you experience a malfunction with the The hydraulic braking system still
braking system while driving, attempt to operates even if there is a malfunction
slow your vehicle by coasting or by using with the ABS.
engine braking. You may be able to If the ABS warning light remains
reduce your vehicle speed by manually illuminated while driving, have the
downshifting to a lower gear. Use manual vehicle inspected by an authorized
shift mode using either the shift lever (if HYUNDAI dealer.
equipped) or the paddle shifters (if
equipped) to shift to a lower gear.
Electronic Brake Force Distribution
(EBD) system warning light
WARNING
If the Parking Brake warning light
illuminates with the parking brake
released, it indicates that the brake fluid btn_WDH-78
level is low. Have the vehicle inspected by
an authorized HYUNDAI dealer.

btn_W-128
When the ABS warning and Parking Brake
warning lights are on simultaneously, it
may indicate a problem with the
Electronic Brake Force Distribution
system.
If both the ABS warning light and the
Parking Brake warning light remain
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer.

4-9
Instrument Cluster

WARNING Information
When both ABS and Parking Brake The Electronic Parking Brake (EPB)
warning lights are on, the braking system warning light may illuminate when the
does not work normally and you may Electronic Stability Control (ESC)
experience an unexpected and indicator light comes on to indicate that
dangerous situation during sudden ESC is not working properly. This does not
braking. indicate malfunction of EPB.
Avoid high speed driving and abrupt
braking.
AUTO HOLD indicator light
Have the vehicle inspected by an
authorized HYUNDAI dealer as soon as if equipped
possible.

WTL-207
Information
This indicator light illuminates:
When the ABS warning light is on or both
ABS and Parking Brake warning lights are • White: When you activate Auto Hold by
on, the speedometer, odometer, or pressing the AUTO HOLD switch.
tripmeter may not work. Also, the MDPS • Green: When you stop the vehicle
warning light may illuminate and the completely by depressing the brake
steering effort may increase or decrease. pedal with Auto Hold activated.
• Yellow: Whenever a malfunction with
the Auto Hold is detected.
Electronic Parking Brake (EPB)
warning light If the AUTO HOLD indicator light
remains yellow while driving, have the
if equipped
vehicle inspected by an authorized
HYUNDAI dealer.
For more information, refer to the
btn_EPB
"Electronic Parking Brake (EPB)" section
in chapter 6.
This warning light illuminates:
• When the ignition switch is in the ON
position. It illuminates for about 3
seconds and then goes off.
• Whenever there is a malfunction with
the EPB.
If the EPB warning light remains
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer

4-10
 4
Motor Driven Power Steering NOTICE
(MDPS) warning light
• Driving with the Malfunction Indicator
Lamp (MIL) on may cause damage to
the emission control system that may
btn_WTA-703 affect drivability and/or fuel economy.
This warning light illuminates: • If the Malfunction Indicator Lamp (MIL)
illuminates, catalytic converter damage
• When the ignition switch is in the ON is possible that may result in loss of
position. It illuminates for about 3 engine power.
seconds and then goes off.
• Whenever there is a malfunction with
the Motor Driven Power Steering. Charging system warning light
If the MDPS warning light remains
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer. btn_W2-08
When there is a malfunction with either
the alternator or electrical charging
Malfunction Indicator Lamp (MIL) system.
If there is a malfunction with either the
alternator or electrical charging system:
btn_WBH-06 1. Drive carefully to the nearest safe
location and stop your vehicle.
This warning light illuminates: 2. Turn the engine OFF and check the
• When the ignition switch is in the ON alternator drive belt for looseness or
position. It illuminates for about 3 breakage.
seconds and then goes off. If the belt is adjusted properly, there
• Whenever there is a malfunction with may be a problem in the electrical
either the emission control system or charging system.
the engine or the vehicle powertrain. If the Charging system warning light
If the MIL warning light remains remains illuminated while driving, have
illuminated while driving, have the the vehicle inspected by an authorized
vehicle inspected by an authorized HYUNDAI dealer.
HYUNDAI dealer.
• If the enhanced engine protection
system activates due to the lack of
engine oil, the engine power is limited.

4-11
Instrument Cluster

Engine oil level warning light Engine oil pressure warning light
if equipped

btn_W2-07
EngineOilWarning
This warning light illuminates:
This warning light illuminates: When the engine oil pressure is low.
When the engine oil level is low. Check
the engine oil level as soon as possible If the engine oil pressure is low:
and add engine oil as required. 1. Drive carefully to the nearest safe
Use only the specified engine oil. Refer to location and stop your vehicle.
the "Recommended lubricants and 2. Turn the engine off and check the
capacities" section in chapter 10. engine oil level (For more information,
Do not overfill the engine oil. Make sure refer to the "Engine oil" section chapter
the oil level is not above F (Full) mark on 9). If the level is low, add oil as required.
the dipstick. If the warning light remains on after
adding oil or if oil is not available, have
Information the vehicle inspected by an authorized
• If you travel approximately 50-100 km HYUNDAI dealer.
(30-60 mi.) after the engine warms up,
after adding the engine oil, the warning Information
light will go off. When engine oil pressure decreases due
• Cycle the ignition from OFF to ON 3 to insufficient engine oil, etc., the Engine
times within 10 seconds, the warning Oil Pressure warning light illuminates. In
light will go off immediately. However, addition, the enhanced engine protection
when you turn off the warning light system that limits engine power is
without adding the engine oil, the light activated. When the engine oil pressure is
will come on again after traveling restored, the warning light and the
approximately 50-100 km (30-60 mi.) enhanced engine protection system will
after the engine warms up. turn off after the engine is restarted.

NOTICE NOTICE
If the warning light comes on • Continued driving with the warning
continuously after adding the engine oil light on may cause engine failure.
and travelling approximately 50-100 km • If the engine is not turned OFF
(30-60 mi.) after the engine warms up, immediately after the Engine Oil
have the system inspected by an Pressure warning light is illuminated,
authorized HYUNDAI dealer. severe damage could occur.
Even if this light doesn’t come on after the
engine has started, the engine oil level
should be periodically checked and
topped up if required.

4-12
 4
Low fuel level warning light Low tire pressure warning light
if equipped

btn_W2-09
btn_WTL-215
This warning light illuminates:
When the fuel tank is nearly empty. Refuel This warning light illuminates:
the vehicle as soon as possible. • When the ignition switch is in the ON
position. It illuminates for about 3
NOTICE seconds and then goes off.
Driving with the Low Fuel Level warning • When one or more tires are significantly
light on or with the fuel level below "E" underinflated. (The location of the
may cause the engine to misfire and under-inflated tire appears on the
damage the catalytic converter. cluster display.)
For more information, refer to the "Tire
Pressure Monitoring System (TPMS)"
Master warning light section in chapter 8.

This warning light remains ON after

blinking for about 60 seconds, or
btn_WAE-211 repeatedly blinks ON and OFF at 3 second
intervals:
This warning light illuminates:
When there is a malfunction with the
If a malfunction is detected in any of the TPMS.
following:
In this occurs, have the vehicle inspected
• Forward Collision-Avoidance Assist by an authorized HYUNDAI dealer as soon
malfunction as possible.
• Forward Collision-Avoidance Assist For more information, refer to the "Tire
radar blocked (if equipped) Pressure Monitoring System (TPMS)" in
• Blind-Spot Collision-Avoidance Assist section chapter 8.
malfunction (if equipped)
• Blind-Spot Collision-Avoidance Assist WARNING
radar blocked (if equipped) • The TPMS cannot alert you to severe
• High Beam Assist malfunction (if and sudden tire damage caused by
equipped) external factors.
• Lamp malfunction (if equipped) • If you notice any vehicle instability,
• Smart Cruise Control malfunction (if immediately take your foot off the
equipped) accelerator pedal, apply the brakes
gradually with light force, and slowly
• Tire Pressure Monitoring System move to a safe position off the road.
(TPMS) malfunction (if equipped)
If the issue is resolved, the Master
warning light turns off.

4-13
Instrument Cluster

Electronic Stability Control (ESC) AUTO STOP indicator light

indicator light if equipped

btn_OTD059012 WSL-A100

This indicator light illuminates: This indicator light illuminates:

• When the ignition switch is in the ON When the engine enters the Idle Stop
position. It illuminates for about 3 mode of ISG (Idle Stop and Go) system.
seconds and then goes off.
When the engine automatically starts, the
• Whenever there is a malfunction with AUTO STOP indicator on the cluster
the ESC system. Illuminates to white.
If this occurs, have the vehicle For more information, refer to the "Idle
inspected by an authorized HYUNDAI Stop and Go (ISG) system" section in
dealer. chapter 6.

This indicator light blinks: Information

While the ESC is operating. When the ISG system automatically starts
For more information, refer to the the engine, some warning lights (ABS,
"Electronic Stability Control (ESC)" ESC, ESC OFF, MDPS or Parking brake
section in chapter 6. warning light) may turn on for a few
seconds because of a low battery voltage
but not a system malfunction.
Electronic Stability Control (ESC)
OFF indicator light
Immobilizer indicator light (without
smart key)
btn_OTD059013
KHW-10
This indicator light illuminates:
• When the ignition switch is in the ON This indicator light illuminates:
position. It illuminates for about 3 When the vehicle detects the immobilizer
seconds and then goes off. in the key with the ignition switch in the
• When you deactivate the ESC system ON position.
by pressing the ESC OFF button. • At this time, you can start the engine.
For more information, refer to the • The indicator light goes off after
"Electronic Stability Control (ESC)" starting the engine.
section in chapter 6.
This indicator light blinks:
Whenever there is a malfunction with the
immobilizer system.
If this occurs, have the vehicle inspected
by an authorized HYUNDAI dealer.

4-14
 4
Immobilizer indicator light (with Turn signal indicator light
smart key)
if equipped

btn_WAE-202
KHW-10
This indicator light blinks:
This indicator light illuminates for up to 30
When you operate the turn signal lever.
seconds:
If any of the following occur, there may be
When the vehicle detects the smart key in
a malfunction with the turn signal system.
the vehicle with the Button Start ignition
switch in the ACC or ON position. • The turn signal indicator light
illuminates but does not blink.
• At this time, you can start the engine.
• The turn signal indicator light blinks
• The indicator light goes off after
rapidly.
starting the engine.
• The turn signal indicator light does not
This indicator light blinks for a few illuminate at all.
seconds: If any of these occur, have your vehicle
When the smart key is not in the vehicle, inspected by an authorized HYUNDAI
you cannot start the engine. dealer.

This indicator light illuminates for 2 Exterior light warning light

seconds and goes off:
if equipped
If the smart key is in the vehicle and the
Button Start ignition switch is ON, but the
vehicle cannot detect the smart key.
If this occurs, have the vehicle inspected btn_WTL-205
by an authorized HYUNDAI dealer.
This warning light illuminates:
This indicator light blinks: When one of the exterior bulbs
Whenever there is a malfunction with the (headlight, DRL, turn signal light, stop
immobilizer system. light, etc) is not operating properly.
Replace the burned out bulb with a new
If this occurs, have the vehicle inspected
one with the same wattage rating.
by an authorized HYUNDAI dealer.

4-15
Instrument Cluster

LED headlight warning light Light ON indicator light

if equipped

btn_WAE-203
btn_WTL-205
This indicator light illuminates:
This warning light illuminates: When the tail lights or headlights are on.
• When the ignition switch is in the ON
position. It illuminates for about 3 High Beam Assist indicator light
seconds and then goes off.
if equipped
• Whenever there is a malfunction with a
LED headlight.
If the LED Headlight warning light
remains illuminated while driving, have btn_WKH-97K
the vehicle inspected by an authorized
HYUNDAI dealer. This indicator light illuminates:
When the high beam is on with the light
This warning light blinks: switch in the AUTO light position.
Whenever there is a malfunction with a • White: When High Beam Assist is ready
LED headlight related part. to operate.
If this occurs, have the vehicle inspected • Green: When High Beam Assist is
by an authorized HYUNDAI dealer. operating.
NOTICE If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
Driving with the LED Headlight warning system switches the high beam to low
light on or blinking may reduce LED beam automatically.
headlight life. For more information, refer to the "High
Beam Assist (HBA)" section in chapter 5.

High beam indicator light

btn_WKH-97

This indicator light illuminates:

• When the headlights are on and the
turn signal lever is moved to the high
beam position.
• When the turn signal lever is pulled into
the Flash-to-Pass position.

4-16
 4
Forward Safety warning light Lane Safety indicator light
if equipped if equipped

btn_WAE-209 btn_WCN7-201

The warning light illuminates: This indicator light illuminates:

• When the ignition switch is in the ON • When the ignition switch is in the ON
position. It illuminates for about 3 position. It illuminates for about 3
seconds and then goes off. seconds and then goes off.
• Yellow: When Forward Safety of • Yellow: When Driver Attention Warning
Forward Collision-Avoidance Assist is is disabled or a malfunction is detected.
deselected, disabled, or a malfunction If the yellow indicator light remains on
is detected. after the front view camera has been
If the yellow warning light remains on uncovered or unblocked, we
after the sensor has been uncovered or recommend that your vehicle be
unblocked when Forward Safety is set, inspected by an authorized HYUNDAI
we recommend that your vehicle be dealer.
inspected by an authorized HYUNDAI
dealer. The indicator light blinks:
• Yellow: Driver Attention Warning
This warning light blinks: recommends to take a break.
• Red: When Forward Safety function is For more information, refer to the "Lane
operating. Keeping Assist (LKA)" section in chapter 7.
For more information, refer to the
"Forward Collision Avoidance Assist (FCA)
(Front view camera only)" section in
chapter 7.

4-17
Instrument Cluster

Driver Attention Warning light SPORT mode indicator light

if equipped

btn_WIK-208

This indicator light illuminates:

WL_ConsiderTakingABreak When you select "SPORT" mode as drive
mode.
This indicator light illuminates:
For more information, refer to the "Drive
• When the ignition switch is in the ON mode integrated control system" section
position. It illuminates for about 3 in chapter 6.
seconds and then goes off.
• Yellow: When Driver Attention Warning
is disabled or a malfunction is detected.
SMART mode indicator light
if equipped
If the yellow indicator light remains on
after the front view camera has been
uncovered or unblocked, have your
vehicle inspected by an authorized btn_WIK-200
HYUNDAI dealer.
This indicator light illuminates:
This indicator light blinks:
When you select ‘’SMART" mode as drive
• Yellow: Driver Attention Warning mode.
recommends to take a break.
For more information, refer to the "Drive
For more information, refer to the "Driver mode integrated control system’’ section
Attention Warning (DAW)" section in in chapter 6.
chapter 7.

Cruise indicator light

if equipped

btn_WIK-205

This indicator light illuminates:

When the cruise control system is
enabled.
For more information, refer to the "Cruise
Control (CC)" section in chapter 7.

4-18
 4
Icy road warning light Press brake pedal to start engine
if equipped (with smart key)
if equipped
This message appears if the Push Button
Start ignition switch is pressed repeatedly
btn_WPDE-201 without depressing the brake pedal.
This indicator light illuminates: Start the vehicle by depressing the brake
pedal and then pressing the Push Button
To warn the driver the road may be icy. Start ignition switch.
When the outside temperature on the
temperature gauge is below 4 °C (40 °F),
a single chime sounds, both the outside Key not in vehicle (with smart key)
temperature gauge and Icy Road Warning if equipped
indicator blink several times, and then This warning message is displayed if the
they remain illuminated. smart key is not in the vehicle when you
You can activate or deactivate the Icy press the Engine Start/Stop button.
Road Warning function from the Settings When attempting to start the vehicle,
menu in the instrument cluster. always have the smart key with you.

Information
Key not detected (with smart key)
If the Icy Road warning light appears if equipped
while driving, avoid speeding, rapid
acceleration, sudden braking, or sharp This message appears if the smart key is
turning. not detected when you press the Push
Button Start ignition switch.

Cluster display messages Press START button again (with

smart key)
Shift to P (with smart key) if equipped

if equipped
If you cannot start the vehicle after the
Push Button Start ignition switch is
This message appears if the Push Button pressed, attempt to start the engine by
Start ignition switch is pressed to the OFF pressing the Push Button Start ignition
position without the gear in the P (Park) switch again.
position.
If the warning message appears each
If this occurs, the Push Button Start time you press the Push Button Start
ignition switch goes to the ACC position. ignition switch, have the vehicle
inspected by an authorized HYUNDAI
Low key battery (with smart key) dealer.
if equipped
When the Push Button Start ignition
switch is pressed to the OFF position, a
message may appear, indicating the
internal battery of the Smart Key is low.
Replace the Smart Key battery.

4-19
Instrument Cluster

Press START button with key (with Battery discharging due to external
smart key) electrical devices
if equipped if equipped
This message appears and the This message appears if the vehicle
immobilizer indicator blinks if you press battery voltage is low or if a current draw
the Push Button Start ignition switch is detected that could drain the vehicle
while the warning message, "Key not battery.
detected" appears. Do not connect any external electronic
devices to the battery system or battery
Check BRAKE SWITCH fuse (with discharge may occur.
smart key) If this message appears on the cluster and
if equipped there are no other external electronic
This message appears if the brake switch devices connected to the vehicle, have
fuse is disconnected. the vehicle inspected by an authorized
HYUNDAI dealer.
Replace the fuse before starting the
engine.
If that is not possible, start the engine by Door, Hood, Trunk open indicator
pressing the Engine Start/ Stop button for
10 seconds in the ACC position.

Shift to P or N to start engine (with

smart key)
if equipped
This message appears if you try to start
the engine in any other position except P
(Park) or N (Neutral).

Information OCN7040017

You can start the engine with the gear in This warning appears if any door or hood
N (Neutral). But, for your safety, always or trunk is left open. The warning
start the engine with the vehicle in P indicates which door is open on the
(Park) with your foot depressing the brake cluster display.
pedal.
WARNING
Before driving the vehicle, confirm the
door, hood, and trunk are fully closed.
Also, check there are no door, hood, and
trunk open warning lights or messages
displayed on the instrument cluster.

4-20
 4
Sunroof open indicator Lights
if equipped

OCN7040018 OIK047145L
This warning appears if you turn off the This indicator displays which exterior light
engine when the sunroof is open. is selected using the lighting control.
Close the sunroof securely before leaving
your vehicle.
Wiper

Low tire pressure

OAD048579N
OCN7040026L
This indicator displays which wiper speed
This warning message appears if the tire is selected using the wiper control.
pressure is low. The corresponding tire on
the vehicle illuminates.
For more information, refer to the "Tire
Pressure Monitoring System (TPMS)"
section in chapter 8.

4-21
Instrument Cluster

Low washer fluid Check turn signal

This message appears if the washer fluid if equipped
level in the reservoir is nearly empty. This message appears if the turn signal
Have the washer fluid reservoir refilled. light is not operating properly.
Replace the burned out bulb with a new
Low fuel one with the same wattage rating.
This message appears if the fuel tank is
almost out of fuel. Check brake light
When this message appears, the low fuel if equipped
level warning light on the cluster comes This message appears if the brake light is
on. not operating properly.
Refuel as soon as possible. Replace the burned out bulb with a new
one with the same wattage rating.
Engine overheated
if equipped Check daytime running light
This message appears when the engine if equipped
coolant temperature is above 120 °C (248 This message appears if the daytime
°F). The engine is overheated and may be running light is not operating properly.
damaged. Replace the burned out bulb with a new
If your vehicle is overheated, refer to the one with the same wattage rating.
"If the engine overheats" section in
chapter 8.
Check high mounted stop light
if equipped
Check headlight This message appears if the high
if equipped mounted stop light is not operating
This message appears if the headlights properly.
are not operating properly. Replace the Replace the burned out bulb with a new
burned out bulb with a new one with the one with the same wattage rating.
same wattage rating.

Check headlight LED

Check headlight (Low)
if equipped
if equipped
This message appears if there is a
This message appears if the headlights problem with the LED headlight. Have the
(Low) are not operating properly. Replace vehicle inspected by an authorized
the burned out bulb with a new one with HYUNDAI dealer.
the same wattage rating.

4-22
 4
Cluster display (Type A)

Cluster display control

OCN7040023L

OCN7040023

Switch Function

MODE button for changing modes.

, MOVE switch for changing items.

OK SELECT/RESET button for setting or resetting the selected item.

Information
If equipped with an infotainment system, only the Settings menu in the infotainment
system is supported and not the instrument cluster.

4-23
Instrument Cluster

Cluster display modes

Modes Symbol Explanation

Trip This mode displays driving information such as the tripmeter,

Computer fuel economy, etc.

Turn By
This mode displays the navigation guidance.
Turn (TBT)

This mode displays:

Driving • Smart Cruise Control (if equipped)
Assist • Lane Keeping Assist
• Lane Following Assist

User In this mode, you can change settings of the doors, lights,
Settings etc.
• The Master Warning mode displays warning messages
related to the vehicle when one or more systems are not
Warning operating normally.
• Tire pressure information is displayed.
The information provided may differ depending on which functions are available to
your vehicle.

4-24
 4
Trip computer group Driving Assist group
LKA/SCC

OCN7043100L

The trip computer mode displays OCN7043092

information related to vehicle driving
parameters including fuel economy, trip Displays the state of Smart Cruise Control
meter information, and vehicle speed. (if equipped) and Lane Keeping Assist.
For more information, refer to the "Trip For more information, refer to the each
computer" section in this chapter. function information in chapter 7.

Turn By Turn (TBT) group Master warning group

OCN7060149 OTM050218N

Turn-by-turn navigation and distance/ The Master Warning Light illuminates if

time to destination appear when Turn by one or more of the following occurs:
Turn mode is selected. • Forward Collision-Avoidance Assist
system malfunction
• Forward Collision-Avoidance Assist
radar blocked (if equipped)
• Blind-Spot Collision-Avoidance Assist
malfunction (if equipped)

4-25
Instrument Cluster

• Blind-Spot Collision-Avoidance Assist In this mode, you can change the settings
radar blocked (if equipped) of the instrument cluster, doors, lamps,
• High Beam Assist malfunction etc.
• Lamp malfunction (if equipped) 1. Driver Assistance
• Smart Cruise Control malfunction (if 2. Door
equipped) 3. Lights
• Tire Pressure Monitoring System 4. Sound
(TPMS) malfunction (if equipped) 5. Convenience
If the issue is resolved, the Master 6. Service interval
Warning Light and the Master Warning
icon are turned off. 7. Theme selection
8. Other
Tire Pressure 9. Language
[Link]
These options may differ depending on
which functions are available on your
vehicle.

Shift to P to edit settings/Engage parking

brake to edit settings
This warning message appears if you try
to select an item from the User Settings
mode while driving.
OCN7080056N Change the settings after parking the
For more information, refer to the "Tire vehicle, applying the parking brake, and
Pressure Monitoring System (TPMS)" shifting the gear to P (Park).
section in chapter 8.
Quick guide (Help)
This mode provides quick guides for the
User settings mode systems in the User Settings mode.
Select an item, press and hold the OK
button.
For more information about each system,
refer to this Owner’s Manual.

OCN7040038N

4-26
 4
1. Driver Assistance

Items Explanation
• Smart Cruise Control
Driving To set the Distance, Acceleration, Reaction Speed of Smart Cruise Control.
Convenience For more information, refer to the "Smart Cruise Control (SCC)" section in
chapter 7.
To adjust Speed Limit Assist
• Speed Limit Offset
Speed limit • Speed Limit Assist/Speed Limit Warning/Off
For more information, refer to the "Intelligent Speed Limit Assist (ISLA)"
section in chapter 7.

To adjust the warning methods of the driver assistance system.

Warning
• Warning Volume: High/Medium/Low/Off
Methods
• Haptic Warning
• Leading Vehicle Departure Alert
Driver To activate or deactivate the Leading vehicle departure alert.
Attention
For more information, refer to the "Driver Attention Warning (DAW)" section
Warning
in chapter 7.
• Forward Safety
To activate or deactivate the Forward Safety.
• Forward Safety Warning Timing
To adjust the Forward Safety warning timing of the driver assistance
system.
For more information, refer to the "Forward Collision Avoidance Assist
(FCA) (Sensor fusion)" section in chapter 7
• Lane Safety
To activate or deactivate the Lane Safety.
Driving
Safety For more information, refer to the "Lane Keeping Assist (LKA)" section in
chapter 7
• Blind-Spot Safety
To activate or deactivate the Blind-Spot Safety.
For more information, refer to the "Blind-spot Collision-Avoidance Assist
(BCA)" section in chapter 7
• Exit Safety
To activate or deactivate the Exit Safety.
For more information, refer to the "Safe Exit Warning (SEW)" section in
chapter 7

4-27
Instrument Cluster

Items Explanation
• Parking Distance Warning Auto ON
To activate or deactivate Parking Distance Warning Auto On.
For more information, refer to the "Forward/Reverse Parking Distance
Parking Warning (PDW)" section in chapter 7.
Safety • Rear Cross-Traffic Safety
To activate or deactivate Rear Cross-Traffic Safety.
For more information, refer to the"Rear Cross-traffic Collision-Avoidance
Assist (RCCA)" section in chapter 7.
* The information provided may differ depending on which functions are applicable to
your vehicle.

2. Door

Items Explanation
• Enable on Shift: All doors will be automatically locked if the shift lever is
moved from the P (Park) position to the R (Reverse), N (Neutral), or D
(Drive) position. (Only when the engine is running)
Auto Lock • Enable on Speed: All doors will be automatically locked when the vehicle
speed exceeds 15 km/h (9.3 mph)
• Disable : The auto door lock operation will be deactivated.
• On Shift to P: All doors will be automatically unlocked if the shift lever is
moved to P (Park) position. (Only when the engine is running)
• On key out/Vehicle Off : All doors will be automatically unlocked when the
Auto Unlock ignition key is removed from the ignition switch or the Engine Start/Stop
button is set to the OFF position.
• Disable : The auto door unlock operation will be canceled.
• Off: The two press unlock function will be deactivated. Therefore, all doors
will unlock if the door unlock button is pressed.
Two Press
Unlock • On: Only the driver’s door will unlock if the door unlock button is pressed.
When the door unlock button is pressed again within 4 seconds, the
remaining doors will unlock.
To activate or deactivate the horn feedback. If the horn feedback is
activated, after locking the door by pressing the lock button on the remote
Horn
key, and pressing it again within 4 seconds, the horn feedback sound will
Feedback
operate once to indicate that all doors are locked (if equipped with remote
key).

To activate or deactivate the smart trunk.

Smart Trunk For more information, refer to the "Smart Trunk release" section in chapter
5.

4-28
 4
3. Lights

Items Explanation

To adjust the illumination level.

Illumination
• Level 1-20
• Off: The one touch turn signal function will be deactivated.
One Touch • 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times when the
Turn Signal turn signal lever is moved slightly.
For more information, refer to the "Lighting control" section in chapter 5.
Headlight • To activate or deactivate the headlight delay function.
Delay For more information, refer to the "Lighting control" section in chapter 5.
• To activate or deactivate the High Beam Assist function.
High Beam For more information, refer to the "High Beam Assist (HBA)" section in
Assist chapter 5.

4. Sound

Items Explanation

Cluster Voice
Guidance To adjust the cluster voice guidance volume.
Volume

Welcome
To activate or deactivate the welcome sound.
sound

4-29
Instrument Cluster

5. Convenience

Items Explanation

Rear • To activate or deactivate the rear occupant alert system.

Occupant For more information, refer to the "Rear Occupant Alert (ROA)" section in
Alert chapter 5.
• On door unlock: The welcome light turns on automatically when the doors
are unlocked.
Welcome
Light • On driver approach: The welcome light turns on automatically when the
vehicle is approached with the smart key.
For more information, refer to the ‘’Mood lamp’’ section in chapter 5.
Wireless To activate or deactivate the wireless charging system in the front seat.
Charging For more information, refer to the "Wireless smartphone charging system"
System section in chapter 5.

To activate or deactivate the Wiper/Light mode.

Wiper/Lights
When activated, the cluster display shows the selected Wiper/Light mode
Display
whenever you changed the mode.

Icy Road
To activate or deactivate the icy road warning function.
Warning

4-30
 4
6. Service interval

Items Explanation

Enable
Service To activate or deactivate the service interval function.
Interval

Information
To use the service interval menu, contact an authorized HYUNDAI dealer.

If the service interval is activated and the time and distance is adjusted, messages are
displayed in the following situations each time the vehicle is turned on.
• Service in
: Displayed to inform the driver the remaining mileage and days to service.
• Service required
: Displayed when the mileage and days to service has been reached or passed.

Information
If any of the following conditions occur, the mileage and number of days to service may
be incorrect.

• The battery cable is disconnected.

• The fuse switch is turned off.
• The battery is discharged.

7. Theme selection

Items Explanation

Theme A
To select the style of instrument cluster
Theme B
graphic style and setting.
Theme C

4-31
Instrument Cluster

8. Other

Items Explanation
• Off: The average fuel economy will not reset automatically whenever
refueling.
• After ignition: When the engine has been OFF for 4 hours or longer the
Fuel Econ. average fuel economy will reset automatically.
Reset • After refueling: The average fuel economy will reset automatically after
adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds
1 km/h (1 mph).
For more information, refer to the "Trip computer" section in this chapter.
Speed Unit
To select the speed unit. (km/h, MPH)
(if equipped)

Fuel Econ.
To select the fuel economy unit. (km/L, L/100km, MPG)
Unit

Temperature
To select the temperature unit. (°C,°F)
Unit

Tire Pressure
To select the tire pressure unit. (psi, kPa, bar)
Unit

9. Language
if equipped

Items Explanation

Choose the language. You can choose the language in infotainment

Language
system. (if equipped)

10. Reset

Items Explanation

You can reset the menus in the User Settings Mode. All menus in the User
Reset Settings Mode are reset to factory settings, except language and service
interval.

4-32
 4
Trip computer Since Refueling

Information
Some driving information stored in the
trip computer resets if the battery is
disconnected.

Current Trip

OCN7043112C
After the vehicle has been refueled, the
trip distance, total driving time and
average fuel economy appear.
To reset manually, press the OK button on
the steering wheel for more than 1 second
when "Since Refueling" appears.

OCN7043100L Since Reset

The trip computer mode displays
information related to vehicle driving
parameters including fuel economy,
tripmeter information, and vehicle speed.

OCN7043100C
Accumulated trip distance, total driving
time, and average fuel economy appear.
The information is accumulated starting
from the last reset.
To reset manually, press the OK button on
the steering wheel for more than 1 second
when "Since Reset" appears.

4-33
Instrument Cluster

Digital speedometer

OIK047151N
Displays the speed of the vehicle.

Auto Stop accumulated time

ODN8A049036
Displays the elapsed time of engine stop
by the Idle Stop and Go system.
For more information, refer to the "Idle
Stop and Go (ISG) system" section in
chapter 6.

4-34
 4
Cluster display (Type B)

Cluster display control

OCN7040023L

OCN7040023

Switch Operation Function

Tap MODE button for changing view modes.

ico_DMW_RE_01

, Tap MOVE switch for changing items.

Tap SELECT/RESET button for setting the selected item.

OK SELECT/RESET button for retrieving assist information or
Tap and hold
resetting the selected item.

Information
If equipped with an infotainment system, only the Settings menu in the infotainment
system is supported and not the instrument cluster.

4-35
Instrument Cluster

View modes
View Modes Explanation

This mode displays driving information such as the trip

Utility group
distance, fuel economy and etc.

This mode displays:

• Smart Cruise Control (if equipped)
Driving assist group • Lane Keeping Assist
• Lane Following Assist
• Driver Attention Warning

Navigation group This mode displays the navigation guidance.

This mode displays the current operation conditions of Cruise

Driving info. group
Control, Smart Cruise Control, and Highway Driving Assists.

The information provided may differ depending on which functions are available on your
vehicle.
To reset the information, press and hold the OK button when the "Since refueling" is
displayed. The trip distance, the average fuel economy, and total driving time will reset
simultaneously.

4-36
 4
Trip computer group • Blind-Spot Collision-Avoidance Assist
radar blocked (if equipped)
• Lamp malfunction (if equipped)
• High Beam Assist malfunction (if
equipped)
• Smart Cruise Control malfunction (if
equipped)
• Tire Pressure Monitoring System
malfunction (if equipped)
If the issue is resolved, the Master
Warning Light and the Master Warning
OCN7043100L icon are turned off.
The trip computer group displays
information related to vehicle driving Tire Pressure
parameters including fuel economy,
tripmeter information, and vehicle speed.
For more information, refer to the "Trip
computer" section in this chapter.

Master warning group

OCN7080056N

For more information, refer to the "Tire

Pressure Monitoring System (TPMS)"
section in chapter 8.

OTM050218N

The Master Warning Light illuminates if

one or more of the following occurs:
• Forward Collision-Avoidance Assist
system malfunction
• Forward Collision-Avoidance Assist
radar blocked
• Blind-Spot Collision-Avoidance Assist
system malfunction (if equipped)

4-37
Instrument Cluster

Driving Assist group Driving info. group

OCN7043092 OCN7043095

SCC/LFA/HDA Driving information summary (1)

Displays the state of Smart Cruise Control The current operation conditions of
(if equipped), Lane Following Assist, and Cruise Control, Smart Cruise Control and
Highway Driving Assist. Highway Driving Assist. It does not show
For more information, refer to each such information while driving assist
function information in chapter 7. mode is working.

Navigation group

OCN7040042L

Driving information summary (2)

OCN7060149 The current operation conditions of
Turn-by-turn navigation and Cruise Control, Smart Cruise Control and
distance/time to destination appear Highway Driving Assist.
when the Navigation group is selected.
Warning message group
When the warning message light appears,
check the detailed information in warning
message group.

4-38
 4
Vehicle settings Setting your vehicle
(infotainment system)
if equipped

Vehicle Settings in the infotainment

system provides user options for a variety
of settings including door lock/unlock
features, convenience features, driver
assistance settings, etc.
Vehicle Settings menu
• Driver Assistance
OCN7043094
• Cluster
• Climate 1. Press the SETUP button on the main
keyboard.
• Seat
2. Select Vehicle to change the Vehicle
• Lights Settings.
• Door The infotainment system may change
• Convenience after software updates. For more
These options may differ depending on information, refer to the manual provided
which functions are available on your in the infotainment system and the quick
vehicle. reference guide.

WARNING
Do not operate the Vehicle Settings while
driving. This may cause distraction
resulting in an accident.

4-39