Safety Data Sheet Dated 20.09.
2022, Version 1
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
PRODUCT NAME: PERFUMERY PRODUCTS EDT/EDP OF ARMAF / ESTIARA / STYLE /
WARNER BROS. SERIES / COSMO DESIGNS / VIVACE / OROS AND PRIME COLLECTION.
MANUFACTURER:
Sterling Perfumes Industries LLC
PO BOX No. 40769, DUBAI -UAE
Tel. +97148855588
Fax +97148855589
2. HAZARDS IDENTIFICATION
If brought into contact with the skin, the product may cause sensitisation of the skin.
This product is a threat to the environment; it is toxic for aquatic organisms following acute
exposure. In the long term this product may have negative effects on the aquatic environment,
because it is not easily biodegradable and/or is bioaccumulable.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixture of synthetic and natural Aroma chemicals, natural essential oils, demineralized Water; ethyl
alcohol and FD & C colors.
4. FIRST AID MEASURES
Contact with skin:
Immediately take off all contaminated clothing. Areas of the body that have - or are only even
suspected of having - come into contact with the toxin must be rinsed immediately with plenty of
running water and possibly with soap.
Contact with eyes: Wash immediately with water for at least 10 minutes.
Swallowing: Induce vomiting. SEEK A MEDICAL EXAMINATION IMMEDIATELY and present
the safety-data sheet. A suspension of activated charcoal in water, or liquid petrolatum may be
administered.
Inhalation: Ventilate the premises. The patient is to be removed immediately from the premises
contaminated and made to rest in a well ventilated area. Should the patient feel unwell, consult a
physician.
5. FIRE-FIGHTING MEASURES
Recommended extinguishers:
CO2, Foam, Chemical powders, according to the materials involved in the fire.
Extinguishers not to be used:
None in particular. Do not use Water.
Risks arising from combustion:
Avoid inhaling the fumes.
Protective equipment:
Use protection for the respiratory tract.
6. ACCIDENTAL RELEASE MEASURES
Measures for personal safety:
Use a mask, gloves and protective clothing.
Environmental measures:
Limit leakages with earth or sand.
If the product has escaped into a water course, into the drainage system, or has contaminated the
ground or vegetation, notify the competent authorities.
Cleaning methods:
Rapidly recover the product by wearing a mask and protective clothing.
If the product is in a liquid form, stop it from entering the drainage system.
Recover the product for re-use if possible, or for elimination. The product might, where
Appropriate, be absorbed by inert material.
After the product has been recovered, rinse the area and materials involved with water.
7. HANDLING AND STORAGE
Handling precautions:
Avoid contact and inhalation of the vapors. See, too, paragraph 8 below.
Do not eat or drink while working.
Storage conditions:
Store in light protected, full and always tightly closed containers.
Instructions as regards storage premises:
Adequately ventilated premises.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Precautionary measures: Give adequate ventilation to the premises where the product is stored and/or
handled.
Respiratory protection: Not needed for normal use.
Protection for hands: Use protective gloves (latex/PVC).
Eye protection: Safety goggles.
Protection for skin: Use clothing that provides comprehensive protection to the skin.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid
Flash point: 23°C
Refractive index: 1.3600 - 1.3850
Density: 0.8000 - 0.8500 g/ml
Odor: characteristic
10. STABILITY AND REACTIVITY
Conditions to avoid:
Stable under normal conditions.)
Substances to avoid:
None in particular.
Hazardous decomposition products: none
11. TOXICOLOGICAL INFORMATION
The concentration of each substance should be borne in mind in assessing the toxological
Effects deriving from the preparation/product (no data => no data known).
Set out below is the toxological information relating to the main substances in the preparation.
12. ECOLOGICAL INFORMATION
Adopt sound working practices, so that the product is not released into the environment.
13. DISPOSAL CONSIDERATIONS
Recover if possible. In doing so, comply with the local and national regulations currently in force.
14. TRANSPORT INFORMATION
UN 1266
Road (ADR) : Class 3 Group III
Rail (RID) : Class 3 Group III
Air (ICAO/IATA) : Class 3 Group III
Sea (IMO) : Class 3 Group III
15. REGULATORY INFORMATION
Symbols:
N Dangerous for the environment
R Phrases:
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
Environment.
S Phrases:
S56 Dispose of this material and its container at hazardous or special waste collection point.
S57 Use appropriate container to avoid environmental contamination.
S60 this material and its container must be disposed of as hazardous waste.
16. OTHER INFORMATION
The information contained herein is based on our state of knowledge at the above-specified
date. It refers solely to the product indicated and constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to
the specific use intended.
This MSDS cancels and replaces any preceding release.
