ET3 Vs Other Brand machine
Other Machine
Panasonic has only one main PCB & Driver PCB but in Other welding machine has
total 5 or more number PCB. That makes Service costly.
1 3
6
Panasonic has 1 nos. Fan for Cooling and fitted on TOP of the machine.
One Fan & Fitted
Fan for Top down cooling backside of the
machine.
Panasonic Output connector is NUT BOLT type but in other machine has
fixed connector type sometimes that brakes after heating up.
NUT Bolt type
connector
Low Power Consuming– YD 400 ET3 DJR
With 35 KVA DG set 4-6
nos YD 400 AT3 can be
run continuously under
site condition
Per phase input amp
Consuming
while working with 4.00
4.5 KVA only
mm electrode – 5.8 during
Amps only running
welding
WHY PANASONIC ?
Welding Quality – YD 400 ET3 DJR
PWM Inverter Technology:
IGBT controlled method offers a light &
compact machine and PWM controlled technology offer constant
welding current & stable welding characteristics.
Quality Welding even at output cable length of 100 meters
for excellent on-site performance
Excellent Welding Quality with all kind of acid , basic ,
stainless steel , Cellulosic & low hydrogen alloy electrodes.
Adjustable Hot Start feature for easy striking.
Adjustable Arc Force feature for positional welding.
Machine Quality – YD 400 ET3 DJR
☺ High Ambient Temperature resistance up to 50°C – ideal for
Indian atmospheric conditions.
High temperature resistance makes 400AT3
more robust to work under tough condition without any breakdown
of machine parts.
Compatible with 7.5 KVA DG sets.
High Input Fluctuation witstanding capacity –
Up to +/- 20% Volts (330 V to 490 V)
Suitable for MMAW as well as Scratch TIG welding.
Digital display of Voltage & Current for more precise setting
of current & voltage.
Safety Features – YD 400 ET3 DJR
Prevent electric shock switch : 100% safe for welder
YD-400ET3 machine are equipped with prevent electric shock
switch, with this switch ‘on’ the no-load voltage will reduced to 13 V
& protect the operator against electric shock while working in
moist, upper air or in metal container
Over voltage & Under voltage protection available to protect the
machine from large variations in input voltages.
Over heating protection to protect the machine from abnormal
temperature rise.
Single phasing protection.
Manufactured as per Std. IEC 60974-1:2000 Ensure superior quality.
Safety Features – YD 400 ET3DJR
Air force Cooling with Dual Fan for better
cooling to electrical & electronic parts
Ensures uninterrupted working for 12 to 16
hours, while working with 4.00/5.00 mm
electrodes
High Reliability
Improved durability with dust-proofing layout
Tunnel layout for Cooling Air
Power devices are cooled by
forced air from top to bottom.
(A) 2nd floor has Tunnel.
From 3rd floor, Cooling air go to
1st floor directly.
(B) For 2nd floor, Tunnel has fins and
through these fins, cooling 2nd floor.
TOP DOWN Cooling keep the
(A) (B)
machine cool even in extreme heat
１３
Safety Features – YD 400ET3 DJR
IP 23 Protection Class makes this
machine suitable for both indoor &
outdoor application both in summers & IP 23
rainy seasons
: Patented Design of triple-tier & four cabinet
The main power components, PC board ,
switch , potentiometer & so on are built in two Hermetic Chambers,
which effectively prevents from ingression of dust.
The Intake port is positioned at the
the top layer , which highly
improve the efficiency of heat
emission & also protect the electronics
parts from getting damaged due to
dust ingression.
Panasonic Machines are ROHS approved But Ador
doesn't.
RoHs Compliance :
PWSI guarantees that welding products
do not contain hazardous substances such as lead, mercury,
cadmium, hexavelant chromium, PBBs, PBDEs, flame
retardants etc realizing “green industrial products”.
Comply Ministry of Environment Directive:
As per the Govt. E-Waste (Management
& Handling) Rules , 2010, All Electrical & Electronic
Equipments shall be disposed off without any adverse effects to
human health & Environment.
All Panasonic Welding Equipments are free from any harmful
material that has adverse effect on human or Environment so
can be disposed off easily after the ‘End of Life’ of the
equipment.
Thanks for your
attention.
