Tumble dryer, T4130
● COMPASS CONTROL
MICROPROCESSOR
● RESIDUAL MOISTURE CONTROL
● TEMPERATURE AND TIME
SELECTION
● STAINLESS STEEL REVERSING
DRUM
● LOW ENERGY CONSUMPTION
● ANTI-CREASE CYCLE
● REVERSIBLE DOOR
● SERVICE PROGRAM
● STACKABLE ON TOP OF W455H
The tumble dryer T4130 with Compass
Control microprocessor works with RMC
(Residual Moisture Control) for an accurate
drying result and a low energy consumption.
The start and programs are selected by a
control knob fitted on the control panel
together with a large and clear display.
The dryer has a reversing drum for less tan-
gling of large items.
Anti-crease cycle in the end of program means
that the drum rotates a few seconds every
minute until the garment is removed.
The tumble dryer T4130 is provided with
service program for adjustment of different
parameters .
Model T4130 All vital parts are easily accessible for simple
service from front and rear.
The machine must be secured to the floor,
alternatively stacked on top of washer extrac-
tor W455H using optional stacking kit..
For further specifications, please see overleaf.
LOIPART AB
P.O. Box 694
SE 441 18 Alingsås, Sweden Exclusive Sales of 19-117
Phone +46 322 66 83 60 Marine Equipment DOC. NO. 19-117L
Telefax +46 322 63 77 47
EDITION 1 11.05
E-mail [email protected]
TUMBLE DRYER, T4130
Scale 1:20
Dimensions mm
1. Door opening Ø 370 mm
2. Electrical connection
3. Exhaust connection Ø 100 mm
Specification
Capacity, kg Innerdrum Weight kgs
* Loading Fuse Shipping
Model/Type Voltage V
filling factor filling factor kW A volume m³
volume litres diameter mm net gross
1:24 1:22
400 3~50
T4130 5.5 6.0 130 575 5.3 10 60 67 0.520
440 3~60
* other voltages available on request
Specification
Energy
Energy Heating
Total time Evaporation kWh/litre Air outlet Evacuated air Pressure drop Sound level
consumption electricity
Type full load* g/min water mm m³/h max Pa dB(A)
kWh/load* kW
evaporated
T4130 34 min 2.75 81 0.93 5.1 Ø 100 260 60 <70
* At rated capacity 100% cotton load at 50% initial moisture dryed to 0%.
Installation: Positioning of machines:
The tumble dryer is to be secured. The machine
is delivered with factory mounted fittings for
attachment to the ship deck by means of 4 M8 300 *
bolts.
735
555
70* 595 70* 595
Optional extra * recommended min.
Model Description
98 88 02 Stacking kit
19-117
Subject to changes without notice.
