BS EN 12671:2016
BSI Standards Publication
Chemicals used for treatment
of water intended for human
consumption — Chlorine
dioxide generated in situ
BS EN 12671:2016 BRITISH STANDARD
National foreword
This British Standard is the UK implementation of EN 12671:2016.
It supersedes BS EN 12671:2009 which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee CII/59, Chemicals for drinking water treatment.
A list of organizations represented on this committee can be
obtained on request to its secretary.
This publication does not purport to include all the necessary
provisions of a contract. Users are responsible for its correct
application.
© The British Standards Institution 2016.
Published by BSI Standards Limited 2016
ISBN 978 0 580 86572 5
ICS 13.060.20; 71.100.80
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 August 2016.
Amendments/corrigenda issued since publication
Date Text affected
BS EN 12671:2016
EUROPEAN STANDARD EN 12671
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2016
ICS 71.100.80 Supersedes EN 12671:2009
English Version
Chemicals used for treatment of water intended for human
consumption - Chlorine dioxide generated in situ
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - Dioxyde de menschlichen Gebrauch - Vor Ort erzeugtes
chlore généré in situ Chlordioxid
This European Standard was approved by CEN on 18 March 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12671:2016 E
worldwide for CEN national Members.
