榮 和 産 業 電 機 (株)

YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMERS(變流器)

● Epoxy molded type

- Selection table of MODEL
- Detail data

YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD. 59

CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHC-6
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

74
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHC-6 CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 3.6 7.2 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 10 20 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 40 60 Lightning impulse voltage(kV). BIL

최대1차전류(A) 150 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 7 Approximate weight(kg)

1차터미널은 동사용(은도금) Primary terminals made of copper.(silver-plate)

적용 SERVICES

과전류별정격부담 / Burdens for the following thermal current(Ith)

오차계급/Accuracy class
40In 75In 8kA

0.5 15 10 15

1.0 40 30 40

5P10 40 30 40

5P20 15 10 15

전류범위/Range In [A] 5-150 5-150A 100-150A

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.

75
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-7ASR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

76
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-7ASR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 3.6 7.2 12 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 10 20 28 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 40 60 75 Lightning impulse voltage(kV). BIL

최대1차전류(A) 1200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 15 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 15 15 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 40-1200 60-1200 150-1200 200-1200 250-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 40-1200 60-1200 150-1200 200-1200 250-1200
15 15 15 15
15
최대부담 40 40 30 30 30 30
40
40 40 40 40
5P10
40-1200 150-1200 200-1200 250-1200
60-1200
Range[A] 5-1200 5-1200 75-1200 250-1200 300-1200 400-1200
100-1200
100-1200 300-1200 400-1200 500-1200
최대부담 15 15 15 15 15 15 15
5P20
Range[A] 5-1200 5-1200 75-1200 100-1200 250-1200 300-1200 400-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1.0/5P10
Range[A] 5-1200 5-1200 100-1200 150-1200 250-1200 500-1200 500-1200
최대부담 15/5 15/5 15/5 15/5 15/5 15/5 15/5
1.0/5P20
Range[A] 5-1200 5-1200 100-1200 150-1200 250-1200 500-1200 500-1200
※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

77
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-6ARN
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

78
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-6ARN CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 3.6 7.2 12 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 10 20 28 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 40 60 75 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 19 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 40-1200 50-1200 100-1200 200-1200 200-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 40-1200 50-1200 100-1200 200-1200 200-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
25-1200 50-1200 75-1200 100-1200 150-1200
Range[A] 5-1200 5-1200
75-1200 75-1200 150-1200 300-1200 300-1200
30 30 15 15 15 15 15
최대부담
40 40 40 40 40 40 40
5P20
5-1200 5-1200 60-1200 60-1200 150-1200 200-1200 200-1200
Range[A]
20-1200 20-1200 150-1200 200-1200 400-1200 400-1200 600-1200
30/30 30/15 30/15 30/15 30/15 30/15
최대부담 40/40
40/40 40/40 40/40 40/40 40/40 40/40
1.0/5P10
5-1200 50-1200 75-1200 200-1200 250-1200 250-1200
Range[A] 5-1200
30-1200 100-1200 200-1200 250-1200 400-1200 400-1200
30/15 30/15 15/15 15/15
최대부담 40/15 40/15 40/15
40/15 40/15 40/15 40/15
1.0/5P20
150-1200 200-1200 300-1200 300-1200
Range[A] 5-1200 25-1200 100-1200
200-1200 250-1200 400-1200 400-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 400-1200 600-1200 600-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

79
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-12ARN
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

WING(RIB) TYPE

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

80
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-12ARN CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 3.6 7.2 12 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 10 20 28 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 40 60 75 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 22 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 30-1200 40-1200 75-1200 150-1200 150-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 30-1200 40-1200 75-1200 150-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
25-1200 40-1200 50-1200 100-1200 100-1200
Range[A] 5-1200 5-1200
50-1200 60-1200 100-1200 150-1200 200-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
40-1200 50-1200 100-1200 15-1200 150-1200
Range[A] 5-1200 5-1200
100-1200 100-1200 300-1200 300-1200 400-1200
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
40-1200 50-1200 100-1200 150-1200 150-1200
Range[A] 5-1200 5-1200
60-1200 100-1200 150-1200 300-1200 400-1200
15/15 15/15 15/15 15/15 15/15
최대부담 40/15 40/15
40/15 40/15 40/15 40/15 40/15
1.0/5P20
50-1200 60-1200 150-1200 200-1200 300-1200
Range[A] 5-1200 5-1200
60-1200 100-1200 150-1200 250-1200 400-1200
최대부담 40/15 40/15 40/15 40/15 40/15 - -
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 300-1200 - -

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

81
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-12
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

82
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-12 CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 3.6 7.2 12 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 10 20 28 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 40 60 75 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 30 Approximate weight(kg)
1차터미널은 동사용(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 25-1200 30-1200 60-1200 75-1200 100-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 25-1200 30-1200 60-1200 75-1200 100-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
15-1200 20-1200 40-1200 50-1200 75-1200
Range[A] 5-1200 5-1200
40-1200 50-1200 100-1200 150-1200 150-1200
30 30 15 15 15 15 15
최대부담
40 40 40 40 40 40 40
5P20
5-1200 20-1200 30-1200 40-1200 75-1200 100-1200 150-1200
Range[A]
50-1200 75-1200 150-1200 200-1200 250-1200 300-1200 400-1200
30/30 30/15 30/15 30/15 30/15 30/15
최대부담 40/40
40/40 40/40 40/40 40/40 40/40 40/40
1.0/5P10
5-1200 30-1200 40-1200 75-1200 100-1200 150-1200
Range[A] 5-1200
5-1200 60-1200 75-1200 150-1200 150-1200 200-1200
15/15 15/15 15/15 15/15 15/15
최대부담 40/15 40/15
40/15 40/15 40/15 40/15 40/15
1.0/5P20
40-1200 40-1200 100-1200 100-1200 150-1200
Range[A] 5-1200 5-1200
50-120 60-1200 100-1200 150-1200 200-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

83
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-24ASR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

84
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-24ASR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL

최대1차전류(A) 1200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 19 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 50-1200 75-1200 200-1200 250-1200 250-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 50-1200 75-1200 200-1200 250-1200 250-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
40-1200 75-1200 150-1200 200-1200 200-1200
Range[A] 5-1200 5-1200
100-1200 150-1200 300-1200 500-1200 600-1200

최대부담 15 15 15 15 15 15 15
5P20
Range[A] 10-1200 10-1200 100-1200 150-1200 250-1200 300-1200 500-1200

최대부담 30/15 30/15 - - - - -

1.0/5P10
Range[A] 10-1200 10-1200 - - - - -

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

85
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-24AR(S)
변류기(變流器)

FOR CGIS

단자기호-MARKING

1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

86
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-24AR(S) CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 25.8 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 24 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 40-1200 50-1200 150-1200 150-1200 150-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 40-1200 50-1200 150-1200 150-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
25-1200 50-1200 100-1200 100-1200 150-1200
Range[A] 5-1200 5-1200
50-1200 75-1200 200-1200 250-1200 300-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
50-1200 75-1200 150-1200 200-1200 250-1200
Range[A] 10-1200 10-1200
150-1200 150-1200 400-1200 500-1200 600-1200

최대부담 40/40 40/40 30/15 30/15 30/15 30/15 30/15

1.0/5P10
Range[A] 10-1200 10-1200 100-1200 150-1200 250-1200 250-1200 400-1200

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

1.0/5P20
Range[A] 10-1200 10-1200 150-1200 200-1200 400-1200 400-1200 600-1200

최대부담 40/15 40/15 40/15 40/15 40/15 - -

1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 400-1200 - -
For MOF
Highest Rated Current Rated short Accuracy
Rated Burden(VA) Insulation Level(kV)
Voltage(kV) Ratio(A) current(Ith) Class
300/5A-1200/5A 0.3W
40In
75/5A-250/5A
25.8 25 50/150
20/5A-60/5A 75In 0.5W

5/5A-15/5A 150In

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

87
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-24AR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

88
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-24AR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 24 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 40-1200 50-1200 150-1200 150-1200 150-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 40-1200 50-1200 150-1200 150-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
25-1200 50-1200 100-1200 100-1200 150-1200
Range[A] 5-1200 5-1200
50-1200 75-1200 200-1200 250-1200 300-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
50-1200 75-1200 150-1200 200-1200 250-1200
Range[A] 10-1200 10-1200
150-1200 150-1200 400-1200 500-1200 600-1200

최대부담 40/40 40/40 30/15 30/15 30/15 30/15 30/15

1.0/5P10
Range[A] 10-1200 10-1200 100-1200 150-1200 250-1200 250-1200 400-1200

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

1.0/5P20
Range[A] 10-1200 10-1200 150-1200 200-1200 400-1200 400-1200 600-1200

최대부담 40/15 40/15 40/15 40/15 40/15 - -

1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 400-1200 - -

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

89
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-22ASR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

90
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-22ASR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 24 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 30-1200 50-1200 150-1200 150-1200 150-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 30-1200 50-1200 150-1200 150-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
20-1200 50-1200 75-1200 75-1200 100-1200
Range[A] 5-1200 5-1200
40-1200 75-1200 200-1200 200-1200 250-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
40-1200 75-1200 150-1200 150-1200 200-1200
Range[A] 10-1200 10-1200
100-1200 150-1200 400-1200 500-1200 600-1200
최대부담 40/15 40/15 40/15 40/15 40/15 - -
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 400-1200 - -

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

91
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-25ASR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

92
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-25ASR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL

최대1차전류(A) 1200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 35 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 30-1200 50-1200 150-1200 150-1200 150-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 30-1200 50-1200 150-1200 150-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
20-1200 50-1200 75-1200 75-1200 100-1200
Range[A] 5-1200 5-1200
40-1200 75-1200 200-1200 200-1200 250-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
40-1200 75-1200 150-1200 150-1200 200-1200
Range[A] 10-1200 10-1200
100-1200 150-1200 400-1200 500-1200 600-1200
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
60-1200 75-1200 200-1200 200-1200 250-1200
Range[A] 10-1200 10-1200
150-1200 150-1200 300-1200 400-1200 500-1200
15/15 15/15 15/15 15/15 15/15
최대부담 40/15 40/15
40/15 40/15 40/15 40/15 40/15
1.0/5P20
100-1200 100-1200 200-1200 250-1200 400-1200
Range[A] 10-1200 10-1200
150-1200 150-1200 300-1200 400-1200 500-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

93
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-20ARSN
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

WING(RIB) TYPE

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

94
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-20ARSN CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)
주파수(Hz) 50/60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 37 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

kV
Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 20-1200 25-1200 60-1200 100-1200 100-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 20-1200 25-1200 60-1200 100-1200 100-1200
15 15 15 15 15
최대부담 40 40 40 40 40 40 40
5P10
20-1200 20-1200 50-1200 50-1200 75-1200
Range[A] 5-1200 5-1200
30-1200 40-1200 75-1200 100-1200 100-1200
15 15 15 15 15
최대부담 40 40 40 40 40 40 40
5P20
12 20-1200 20-1200 50-1200 50-1200 75-1200
Range[A] 5-1200 5-1200 30-1200 40-1200 75-1200 100-1200 100-1200
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
Range[A] 5-1200 5-1200 25-1200 30-1200 60-1200 75-1200 100-1200
40-1200 50-1200 100-1200 150-1200 200-1200

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

40/15 40/15 40/15 40/15 40/15
1.0/5P20
30-1200 40-1200 60-1200 100-1200 150-1200
Range[A] 5-1200 5-1200
40-1200 50-1200 100-1200 150-1200 150-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 25-1200 40-1200 75-1200 100-1200 100-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 25-1200 40-1200 75-1200 100-1200 100-1200

최대부담 40 40 15 15 15 15 15
40 40 40 40 40
5P10
20-1200 30-1200 50-1200 60-1200 75-1200
Range[A] 5-1200 5-1200
30-1200 50-1200 100-1200 150-1200 200-1200
15 15 15 15 15
최대부담 40 40 40 40 40 40 40
17.5 5P20
30-1200 40-1200 100-1200 150-1200 150-1200
Range[A] 10-1200 10-1200
24 100-1200 150-1200 200-1200 400-1200 500-1200
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
40-1200 50-1200 100-1200 150-1200 150-1200
Range[A] 10-1200 10-1200
60-1200 75-1200 200-1200 250-1200 300-1200

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

40/15 40/15 40/15 40/15 40/15
1.0/5P20
50-1200 75-1200 150-1200 150-1200 200-1200
Range[A] 10-1200 10-1200
60-1200 150-1200 200-1200 200-1200 300-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1P n>10/5G
Range[A] 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200 300-1200
※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

95
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-25AR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

96
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-25AR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL

최대1차전류(A) 3200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 40 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 20-1200 30-1200 60-1200 75-1200 100-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 20-1200 30-1200 60-1200 75-1200 100-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
15-1200 20-1200 40-1200 50-1200 75-1200
Range[A] 5-1200 5-1200
25-1200 30-1200 75-1200 100-1200 150-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
20-1200 25-1200 50-1200 60-1200 100-1200
Range[A] 10-1200 10-1200
60-1200 75-1200 200-1200 200-1200 300-1200
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
30-1200 40-1200 75-1200 100-1200 100-1200
Range[A] 10-1200 10-1200
50-1200 60-1200 150-1200 150-1200 200-1200
15/15 15/15 15/15 15/15 15/15
최대부담 40/15 40/15
40/15 40/15 40/15 40/15 40/15
1.0/5P20
30-1200 40-1200 100-1200 100-1200 150-1200
Range[A] 10-1200 10-1200
40-1200 60-1200 150-1200 150-1200 200-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

97
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-23AR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

(Ipn≤3000A)

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

98
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-23AR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 2500 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 55 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

kV Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 15-2000 15-2000 30-2000 40-2000 40-2000
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 15-2000 15-2000 30-2000 40-2000 40-2000
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
10-2500 10-2500 25-2500 30-2500 30-2500
Range[A] 5-1200 5-1200
15-2000 15-2000 30-2000 50-2000 75-2000
15 15 15 15 15
최대부담 40 40
12 40 40 40 40 40
5P20
Range[A] 5-1200 5-1200 15-2000 15-2000 25-2000 40-2000 40-2000
25-2000 30-2000 60-2000 60-2000 75-2000
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
15-2000 25-2000 30-2000 40-2000 50-2000
Range[A] 5-1200 5-1200 25-2000 30-2000 50-2000 50-2000 75-2000

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

40/15 40/15 40/15 40/15 40/15
1.0/5P20
15-2000 20-2000 30-2000 50-2000 50-2000
Range[A] 5-1200 5-1200
20-2000 25-2000 40-2000 50-2000 60-2000
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 20-1500 25-1500 50-1500 60-1500 75-1500
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 20-1500 25-1500 50-1500 60-1500 75-1500
15 15 15 15 15
최대부담 40 40 40 40 40 40 40
5P10
15-1500 15-1500 40-1500 40-1500 50-1500
Range[A] 5-1200 5-1200
20-1500 25-1500 50-1500 60-1500 100-1500
17.5 15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P20
24 15-1500 20-1500 40-1500 50-1500 60-1500
Range[A] 10-1200 10-1200
50-1500 50-1500 100-1500 150-1500 200-1500

최대부담 40/40 40/40 30/15 30/15 30/15 30/15 30/15

40/40 40/40 40/40 40/40 40/40
1.0/5P10
25-1500 30-1500 60-1500 75-1500 100-1500
Range[A] 10-1200 10-1200
40-1500 40-1500 100-1500 100-1500 150-1500

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

40/15 40/15 40/15 40/15 40/15
1.0/5P20
25-1500 30-1500 60-1500 75-1500 100-1500
Range[A] 10-1200 10-1200 30-1500 40-1500 100-1500 100-1500 150-1500

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

99
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-25ARS
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding (Ipn≤3200A)

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

100
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-25ARS CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 12 17.5 24 Highest voltage(kV)
주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 3200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 47 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

kV Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 15-2000 15-2000 40-2000 60-2000 60-2000
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 15-2000 15-2000 40-2000 60-2000 60-2000
15 15 15 15 15
최대부담 40 40 40 40 40 40 40
5P10
10-2000 10-2000 30-2000 50-2000 50-2000
Range[A] 5-1200 5-1200 15-2000 15-2000 40-2000 50-2000 60-2000
15 15 15 15 15
최대부담 40 40
12 40 40 40 40 40
5P20
Range[A] 5-1200 5-1200 15-2000 15-2000 40-2000 60-2000 60-2000
30-2000 30-2000 75-2000 75-2000 100-2000
30/15 30/15 30/15 30/15 30/15
최대부담 40/40 40/40
40/40 40/40 40/40 40/40 40/40
1.0/5P10
20-2000 25-2000 40-2000 75-2000 50-2000
Range[A] 5-1200 5-1200 30-2000 40-2000 60-2000 100-2000 150-2000
15/15 15/15 15/15 15/15 15/15
최대부담 40/15 40/15
40/15 40/15 40/15 40/15 40/15
1.0/5P20
20-2000 25-2000 40-2000 60-2000 100-2000
Range[A] 5-1200 5-1200
30-2000 30-2000 50-2000 75-2000 150-2000
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 20-2000 30-2000 60-2000 75-2000 100-2000
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 20-2000 30-2000 60-2000 75-2000 100-2000

최대부담 40 40 15 15 15 15 15
40 40 40 40 40
5P10
15-2000 15-2000 40-2000 50-2000 75-2000
Range[A] 5-1200 5-1200
25-2000 30-2000 50-2000 100-2000 150-2000
17.5 15 15 15 15 15
최대부담 40 40 40 40 40 40 40
5P20
24 20-2000 25-2000 50-2000 60-2000 100-2000
Range[A] 10-1200 10-1200
60-2000 75-2000 200-2000 200-2000 300-2000

최대부담 40/40 40/40 30/15 30/15 30/15 30/15 30/15

40/40 40/40 40/40 40/40 40/40
1.0/5P10
30-2000 40-2000 75-2000 100-2000 100-2000
Range[A] 10-1200 10-1200 50-2000 60-2000 150-2000 150-2000 200-2000

최대부담 40/15 40/15 15/15 15/15 15/15 15/15 15/15

40/15 40/15 40/15 40/15 40/15
1.0/5P20
Range[A] 10-1200 10-1200 30-2000 40-2000 100-2000 100-2000 150-2000
40-2000 60-2000 150-2000 150-2000 200-2000

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

101
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-21AR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

(case of 24kV)

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

(case of 36kV)
1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

102
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-21AR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS
최고회로전압(kV) 12 17.5 24 36 Highest voltage(kV)
주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 28 38 50 70 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 75 95 150 170 Lightning impulse voltage(kV). BIL
최대1차전류(A) 3200 Max. primary current(A)
2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 78 Approximate weight(kg)
1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)
전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

kV
Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 5-1200 5-1200 10-1200 15-1200 25-1200 30-1200 40-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 5-1200 5-1200 10-1200 15-1200 25-1200 30-120 40-1200

최대부담 40 40 40 15 40 15 15
40 40 40
5P10
Range[A] 5-1200 5-1200 10-1200 10-1200 20-1200 20-1200 25-1200
15-1200 25-1200 40-1200

최대부담 40 40 15 15 15 15 15
12 40 40 40 40 40
5P20
Range[A] 5-1200 5-1200 10-1200 10-1200 20-1200 25-1200 30-1200
15-1200 20-1200 30-1200 30-1200 50-1200

최대부담 40/40 40/40 40/40 40/40 30/15 30/15 30/15

40/40 40/40 40/40
1.0/5P10
Range[A] 5-1200 5-1200 15-1200 15-1200 25-1200 30-1200 40-1200
30-1200 40-1200 50-1200

최대부담 40/15 40/15 40/15 40/15 15/15 15/15 15/15

40/15 40/15 40/15
1.0/5P20
Range[A] 5-1200 5-1200 15-1200 15-1200 25-1200 30-1200 30-1200
30-1200 40-1200 50-1200
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 15-1200 15-1200 30-1200 40-1200 40-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 15-1200 15-1200 30-1200 40-1200 40-1200

최대부담 40 40 15 15 15 15 40
40 40 40 40
5P10
17.5 10-1200 10-1200 20-1200 25-1200
Range[A] 5-1200 5-1200 15-1200 15-1200 30-1200 30-1200 40-1200
24
최대부담 40 40 40 40 40 40 40
5P20
Range[A] 10-1200 10-1200 20-1200 25-1200 40-1200 40-1200 40-1200
최대부담 40/40 40/40 40/40 30/15 30/15 30/15 30/15
1.0/5P10
Range[A] 10-1200 10-1200 20-1200 20-1200 40-1200 40-1200 40-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 40/15
1.0/5P20
Range[A] 10-1200 10-1200 20-1200 25-1200 40-1200 50-1200 50-1200
최대부담 15 15 15 15 15 15 15
0.5
Range[A] 20-1200 20-1200 40-1200 50-1200 50-1200 75-1200 100-1200
최대부담 30 30 30 30 30 30 30
1.0
Range[A] 20-1200 30-1200 50-1200 50-1200 75-1200 75-1200 100-1200
최대부담 30 30 30 30 30 30 30
5P10
Range[A] 20-1200 30-1200 50-1200 50-1200 75-1200 75-1200 100-1200
36
최대부담 30 30 30 30 30 30 30
5P20
Range[A] 20-1200 30-1200 50-1200 50-1200 75-1200 100-1200 150-1200
최대부담 30/15 30/15 30/15 30/15 30/15 30/15 30/15
1.0/5P10
Range[A] 20-1200 30-1200 50-1200 50-1200 75-1200 100-1200 150-1200
최대부담 40/15 40/15 40/15 40/15 40/15 40/15 30/15
1.0/5P20
Range[A] 30-1200 50-1200 75-1200 100-1200 150-1200 200-1200 250-1200
※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest transformation ratio,
unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

103
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-31AR(W)
변류기(變流器)

단자기호-MARKING

1 core single ratio

1 core double ratio

2 core single ratio

․ Approximate dimension in mm

1 core single ratio with 3-rd winding

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

104
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-31AR(W) CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 36 Highest voltage(kV)

주파수(Hz) 50 / 60 Frequency(Hz)

상용주파내전압(kV) 70 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 170 Lightning impulse voltage(kV). BIL

최대1차전류(A) 1200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M5 2.8~3.5 M5
중량(kg) 55~60 Approximate weight(kg)

1차터미널은 동사용(은도금) Primary terminals made of copper.(silver-plate)

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 12.5kA 25kA 31.5kA 40kA
최대부담 15 15 15 15
0.5
Range[A] 40-1200 75-1200 100-1200 150-1200
최대부담 40 40 40 40
1.0
Range[A] 40-1200 75-1200 100-1200 150-1200
15 15 15 15
최대부담
40 40 40 40
5P10
25-1200 50-1200 50-1200 75-1200
Range[A]
50-1200 75-1200 100-1200 150-1200
15 15 15 15
최대부담
40 40 40 40
5P20
40-1200 60-1200 75-1200 100-1200
Range[A]
100-1200 200-1200 250-1200 300-1200
30/15 30/15 30/15 30/15
최대부담
40/40 40/40 40/40 40/40
1.0/5P10
50-1200 75-1200 100-1200 150-1200
Range[A]
100-1200 150-1200 200-1200 250-1200
15/15 15/15 15/15 15/15
최대부담
40/15 40/15 40/15 40/15
1.0/5P20
50-1200 100-1200 150-1200 150-1200
Range[A]
100-1200 150-1200 150-1200 200-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

105
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-30A
변류기(變流器)

C-GIS용

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

106
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-30A CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 36 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 70 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 170 Lightning impulse voltage(kV). BIL

최대1차전류(A) 2500 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5

중량(kg) 47 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 12.5kA 25kA 31.5kA 40kA
최대부담 15 15 15 15
0.5
Range[A] 50-2500 100-2500 150-2500 150-2500

최대부담 40 40 40 40
1.0
Range[A] 50-2500 100-2500 150-2500 150-2500

15 15 15 15
최대부담
40 40 40 40
5P10
40-2500 75-2500 100-2500 100-2500
Range[A]
100-2500 200-2500 250-2500 300-2500

15 15 15 15
최대부담
30 30 40 30
5P20
75-2500 150-2500 200-2500 200-2500
Range[A]
200-2500 400-2500 600-2500 600-2500

30/15 30/15 30/15 30/15

최대부담
40/40 40/40 40/40 40/40
1.0/5P10
75-2500 150-2500 200-2500 200-2500
Range[A]
150-2500 300-2500 500-2500 600-2500

최대부담 10/10 10/10 10/10 10/10

0.5/5P20
Range[A] 150-2500 300-2500 500-2500 600-2500

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

107
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHCEI-30AR
변류기(變流器)

권장이격거리-SUGGESTED DISTANCE

단자기호-MARKING
1 core single ratio

1 core double ratio

2 core single ratio

1 core single ratio with 3-rd winding

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, wound-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 권선-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

108
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHCEI-30AR CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 36 Highest voltage(kV)

주파수(Hz) 60 Frequency(Hz)

상용주파내전압(kV) 70 Power-frequency withstand voltage(kV)

충격내전압(kV) BIL 170 Lightning impulse voltage(kV). BIL

최대1차전류(A) 1200 Max. primary current(A)

2차전류(A) 5/1 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 22 Approximate weight(kg)

1차터미널은 동임(은도금) Primary terminals made of copper.(silver-plate)

전압검출단자는 주문 사양임 VD terminal on request

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 12.5kA 25kA 31.5kA 40kA
최대부담 15 15 15 15
0.5
Range[A] 40-1200 75-1200 100-1200 150-1200
최대부담 40 40 40 40
1.0
Range[A] 40-1200 75-1200 100-1200 150-1200
15 15 15 15
최대부담
40 40 40 40
5P10
25-1200 50-1200 50-1200 75-1200
Range[A]
50-1200 75-1200 100-1200 150-1200
15 15 15 15
최대부담
40 40 40 40
5P20
40-1200 60-1200 75-1200 100-1200
Range[A]
100-1200 200-1200 250-1200 300-1200
30/15 30/15 30/15 30/15
최대부담
40/40 40/40 40/40 40/40
1.0/5P10
50-1200 75-1200 100-1200 150-1200
Range[A]
100-1200 150-1200 200-1200 250-1200
15/15 15/15 15/15 15/15
최대부담
40/15 40/15 40/15 40/15
1.0/5P20
50-1200 100-1200 150-1200 150-1200
Range[A]
100-1200 150-1200 150-1200 200-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

109
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

CURRENT TRANSFORMER(CT)
YHC-24SO
변류기(變流器)

OUT DOOR MOLD TYPE

단자기호-MARKING
1 core single ratio

1 core double ratio

․ Approximate dimension in mm

개요 DESCRIPTION
Current transformer, window-type, valid for indoor service, cast resin.
계기용/계전기용의 변류기, 관통-type, 옥내용, 에폭시성형품.
Designed for measurement and/or protection.
적용규격은 KS, IEC, JEC, IEEE 등에 의한다.
Manufactured as per standard KS, IEC, JEC, IEEE.
기타 사양이 다른 경우는 문의 요망
Other standards or special technical specification on request.

110
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS
 榮 和 産 業 電 機 (株)
YOUNG-HWA INDUSTRIAL ELECTRIC CO.,LTD.

변류기(變流器) YHC-24SO CURRENT TRANSFORMER(CT)

전기적특성 ELECTRICAL CHARACTERISTICS

최고회로전압(kV) 24(25.8) Highest voltage(kV)
주파수(Hz) 60 Frequency(Hz)
상용주파내전압(kV) 50 Power-frequency withstand voltage(kV)
충격내전압(kV) BIL 150 Lightning impulse voltage(kV). BIL
최대1차전류(A) 1200 Max. primary current(A)
2차전류(A) 5 Secondary current(A)

기계적특성 MECHANICAL CHARACTERISTICS

조임강도(Nm) TORQUE(Nm)
M12 56~70 M12
M6/M5 2.8~3.5 M6/M5
중량(kg) 20~25 Approximate weight(kg)

적용 SERVICES

오차계급 과전류별정격부담 / Burdens for the following thermal current(Ith) [VA]

Accuracy class 40In 75In 8kA 12.5kA 25kA 31.5kA 40kA
최대부담 30 30 15 15 15 15 15
0.5
Range[A] 10-1200 10-1200 50-1200 75-1200 200-1200 250-1200 250-1200
최대부담 40 40 40 40 40 40 40
1.0
Range[A] 10-1200 10-1200 50-1200 75-1200 200-1200 250-1200 250-1200
15 15 15 15 15
최대부담 40 40
40 40 40 40 40
5P10
40-1200 75-1200 150-1200 200-1200 200-1200
Range[A] 5-1200 5-1200
100-1200 150-1200 300-1200 500-1200 600-1200

최대부담 15 15 15 15 15 15 15
5P20
Range[A] 10-1200 10-1200 100-1200 150-1200 250-1200 300-1200 500-1200

※ Other specifications will be available on your request and contact with YOUNG-HWA directly.
※ For multi ratio transformers with tappings on the secondary winding, the accuracy requirements refer to the highest
transformation ratio, unless otherwise specified.
2차 권선에 탭이 있는 다중비 변성기의 경우, 달리 규정하지 않는다면 비오차 요구사항은 변성기의 가장 높은 변성비에 적용된다.

111
YOUNG HWA INDUSTRIAL ELECTRIC CO.,LTD.
CURRENT TRANSFORMERS