Scribd
Upload
22 views3 pages

Wet Riser Project

The hydraulic calculation report for the Wet Riser Project indicates that the system's source duty is 0.0 l/min at 0.000 bar, with no operating sprinkler heads meeting the required density or minimum pressures. The design parameters include a specified discharge density of 0.00 mm/min and a maximum fluid velocity of 0.00 m/s. The report highlights that there are 7 pipes in the system, with a total volume of 0.23 m3, but no effective flow or pressure is achieved in the current configuration.

Uploaded by

snw1975
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views3 pages

Wet Riser Project

The hydraulic calculation report for the Wet Riser Project indicates that the system's source duty is 0.0 l/min at 0.000 bar, with no operating sprinkler heads meeting the required density or minimum pressures. The design parameters include a specified discharge density of 0.00 mm/min and a maximum fluid velocity of 0.00 m/s. The report highlights that there are 7 pipes in the system, with a total volume of 0.23 m3, but no effective flow or pressure is achieved in the current configuration.

Uploaded by

snw1975
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

FHC - Hydraulic Calculation Report

Submitted by FHC user number: 9991 Project: Wet Riser Project


igorcauret@gmail.com Project Ref ---
Area Ref: Most Unfavourable
Inst. Number: 1

Tel:
Fax:

Project Data and Design Parameters


Project name : Wet Riser Project
Area reference : Most Unfavourable
Address / location : ---
Project number : ---
Installation number(s) : 1
Drawing number(s) : ---
Issue no / date : ---
Designers reference : ---
Project Data File : WET RISER PROJECT.FHC
Hazard classification : Domestic
Design authority : CP52:2004 Singapore Sprinkler Rules
Insurance company : ---
Specified density of discharge : 0.00 mm/min (l/min/m2)
Assumed maximum area of operation : 0.00 m2
Number of operating sprinkler heads : 3
Maximum area covered per head : 0.00 m2
Highest head / nozzle above source : 0.00 m
Number of pipes in system : 7 from 65 to 150 mm
Pressure loss equation used : Hazen-Williams
Fluid : Water
Pipe Data Table : CP52.PDT
Maximum fluid velocity : 0.00 m/s in pipe 0 0
Volume of pipework and fittings : 0.23 m3
Elbows are welded for : 65 mm and above
Comment : ---
Checked by & Date :

Source duty = 0.0 l/min @ 0.000 bar at node no 100

Canute FHC Ver: 1.8.6 13 August, 2025 - 13:58


www.canutesoft.com Page: 1/3
FHC - Hydraulic Calculation Report
Submitted by user number: 9991 Project: Wet Riser Project
igorcauret@gmail.com Project Ref ---
Tel: Area Ref: Most Unfavourable
Fax: Inst. Number: 1

Operating Sprinkler Heads, Nozzles and Hydrants


Head|Node| Size | 'K' |F l o w|A r e a|Density mm/min|Pressure bar|Heights|Pipe
no | no | mm | factor| l/min | m2 |Req.d Actual| Min Actual| m | no
1 120 384.86 0.0 0.000 0.00 0.00 3.50 0.000 0.000 2
2 131 384.86 0.0 0.000 0.00 0.00 3.50 0.000 0.000 4
3 142 384.86 0.0 0.000 0.00 0.00 3.50 0.000 0.000 6

0 heads are under the required density / minimum pressures

Canute FHC Ver: 1.8.6 13 August, 2025 - 13:58


www.canutesoft.com Page: 2/3
FHC - Hydraulic Calculation Report
Submitted by user number: 9991 Project: Wet Riser Project
igorcauret@gmail.com Project Ref ---
Tel: Area Ref: Most Unfavourable
Fax: Inst. Number: 1

Hydraulically Significant Pipes in System


NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
Maximum flow rate error at nodes : 0.00000 L/min
Maximum pressure drop error at nodes : 0.00000 bar
Maximum pressure drop error in loops : 0.00000 bar
Overall head flow balance error : 0.00000 %

Canute FHC Ver: 1.8.6 13 August, 2025 - 13:58


www.canutesoft.com Page: 3/3

You might also like