UNISONIC TECHNOLOGIES CO.

, LTD
PN2907A PNP SILICON TRANSISTOR

PNP GENERAL PURPOSE

AMPLIFIER

„ DESCRIPTION
This UTC PN2907A is designed for use as a general purpose
amplifier and switch requiring collector currents to 600 mA.

„ ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
- PN2907AG-AB3-R SOT-89 B C E Tape Reel
PN2907AL-T92-B PN2907AG-T92-B TO-92 E B C Tape Box
PN2907AL-T92-K PN2907AG-T92-K TO-92 E B C Bulk
Note: Pin Assignment: E: Emitter C: Collector B: Base

„ MARKING
SOT-89 TO-92

www.unisonic.com.tw 1 of 6
Copyright © 2017 Unisonic Technologies Co., Ltd QW-R201-041.H
PN2907A PNP SILICON TRANSISTOR

„ ABSOLUTE MAXIUM RATINGS (TA=25°C, unless otherwise specified.)

PARAMETER SYMBOL RATINGS UNIT
Collector-Emitter Voltage VCEO -60 V
Collector-Base Voltage VCBO -60 V
Emitter-Base Voltage VEBO -5 V
Collector Current (Continuous) IC -600 mA
Collector Current (Peak) ICM -900 mA
SOT-89 350 mW
Power Dissipation PD
TO-92 625 mW
Junction Temperature TJ +150 °C
Storage Temperature TSTG -40 ~ +150 °C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty
cycle operations.
„ THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
SOT-89 104 ℃/W
Thermal resistance, junction to Ambient θJA
TO-92 200 ℃/W

„ ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified.)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage BVCEO IC=-10mA, IB=0 -60 V
Collector-Base Breakdown Voltage BVCBO IC=-10μA, IE=0 -60 V
Emitter-Base Breakdown Voltage BVEBO IE=-10μA , IC=0 -5 V
Base Cutoff Current IB VCB=-30V, VEB=-0.5V -50 nA
Collector Cutoff Current ICEX VCE=-30V, VBE=-0.5V -50 nA
VCB=-50V, IE=0 -0.02 μA
Collector Cutoff Current ICBO
VCB=-50V, IE=0, Ta=150°C -20 μA
ON CHARACTERISTICS
IC=-0.1mA, VCE=-10V 75
IC=-1.0 mA, VCE=-10V 100
DC Current Gain hFE IC=-10 mA, VCE=-10V 100
IC=-150 mA, VCE=-10V (Note) 100 300
IC=-500 mA, VCE=-10V (Note) 50
Collector-Emitter Saturation Voltage IC=-150mA, IB=-15mA -0.4 V
VCE(SAT)
(Note) IC=-500mA, IB=-50mA -1.6 V
IC=-150mA, IB=-15mA (Note) -1.3 V
Base-Emitter Saturation Voltage VBE(SAT)
IC=-500mA, IB=-50mA -2.6 V
SMALL SIGNAL CHARACTERISTICS
Current Gain – Bandwidth Product fT IC=-50mA, VCE=-20V, f=100MHz 200 MHz
Output Capacitance Cob VCB=-10V, IE=0, f=100kHz 8 pF
Input Capacitance Cib VEB=-2V, IC=0, f=100kHz 30 pF
SWITCHING CHARACTERISTICS
Turn-on Time tON 45 ns
VCC=-30V, IC=-150mA
Delay Time tDLY 10 ns
IB1=-15mA
Rise Time tR 40 ns
Turn-off Time tOFF 100 ns
VCC=-6V, IC=-150mA
Storage Time tS 80 ns
IB1=IB2=-15mA
Fall Time tF 30 ns
Note: Pulse Test: Pulse Width ≤ 300ms, Duty Cycle≤2.0%

UNISONIC TECHNOLOGIES CO., LTD 2 of 6

www.unisonic.com.tw QW-R201-041.H
PN2907A PNP SILICON TRANSISTOR

„ TEST CIRCUITS

UNISONIC TECHNOLOGIES CO., LTD 3 of 6

www.unisonic.com.tw QW-R201-041.H
PN2907A PNP SILICON TRANSISTOR

„ TYPICAL CHARACTERISTICS

Base-Emitter Saturation Voltage Base Emitter ON Voltage vs.

vs. Collector Current Collector Current

-1
Base Emitter On Voltage, VBE(ON) (V)

-1
Base Emitter Voltage, VBE(SAT) (V)

-40℃ -40℃
-0.8
-0.8

25℃ -0.6
-0.6 25℃

125℃ -0.4
-0.4 125℃

-0.2 -0.2
β =10 VCE=-5V
0 0
-1 -10 -100 -500 -0.1 -1 -10 -25
Collector Current, IC (mA) Collector Current, IC (mA)

UNISONIC TECHNOLOGIES CO., LTD 4 of 6

www.unisonic.com.tw QW-R201-041.H
PN2907A PNP SILICON TRANSISTOR
Collector-Cutoff Current vs. Input and Output Capacitance vs. Reverse
Ambient Temperature Bias Voltage
-100 20
VCB=-35V
16
-10

12
Cib
-1
8

-0.1 Cob
4

-0.01 0
25 50 75 100 125 0.1 1 10 50

Ambient Temperature, Ta (℃) Reverse Bias Voltage (V)

„ TYPICAL CHARACTERISTICS(Cont.)

UNISONIC TECHNOLOGIES CO., LTD 5 of 6

www.unisonic.com.tw QW-R201-041.H
PN2907A PNP SILICON TRANSISTOR

„ TYPICAL CHARACTERISTICS FOR COMMON EMITTER (f=1kHz)

Common Emitter Characteristics

1.5
IC=-10mA hfe
1.4 VCE=-10V hie
1.3 hre
1.2 hoe
1.1 hoe
1
0.9 hre
0.8
hie
0.7
0.6 hfe
0.5
-40 -20 0 20 40 60 80 100

Ambient Temperature, Ta (℃)

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.

UNISONIC TECHNOLOGIES CO., LTD 6 of 6

www.unisonic.com.tw QW-R201-041.H