Welding Tool List
If you have any questions please contact Derrick Stein at 607-746-4699 or
email at
[email protected] • 1 Pair of oxyacetylene welding goggles/ glasses with #5 lens (or on your auto darkening
welding hood if equipped with cutting mode)
• 2 Sets of ear plugs
• 1 Arc welding helmet (auto- darkening or passive)
• 1 Leather cape, sleeves with collar and bib or full leather jacket
• 1 Pair of high top leather work boots
• 1 Long-sleeved cotton shirt and pants without cuffs
• 3 Pairs of leather welder's gloves ( 2 stick/mig, 1 tig)
• 1 Chipping hammer (pick and chisel type)
• 2 Wire brushes, wood handle (steel and stainless steel)
• 1 Single flint torch lighter with 6 extra flints
• 1 Soapstone holder and 6 refills
• GTAW Tungsten (type that work on AC or DC-. Purple, Gray, or Orange)
Ø One box of 1/16”
Ø One box of 3/32”
• TIG Torch parts for WP17 Torch to include:
Ø Long back cap
Ø 1 Collet body and Collet 3/32"
Ø 1 Collet body and Collet 1/16"
Ø 2 Ceramic cups #5 and #6
• 1 Set of standard tip cleaners
• 1, 16 oz. ball peen hammer
• 1, 12' steel tape ruler
• 2 Pair C-clamp vise grips
• 1, 10" crescent wrench
• 1, 12" combination square
• 1 Center punch, 3/8" diameter
• 1 Scribe for metal
• Files – 1 half round, single cut or double cut
• 1 Cold chisel, 3/4" wide
• MIG pliers
• 1 pair of layout magnets (shaped like arrows)
• Metal Dividers(this is a compass that scribes metal)
• Flashlight
• 1, 4 1/2" right angle grinder of good quality
• 8@ 4 1/2" x 1/4" grinding wheels for above grinder
• 8@4 1/2" flap/blending discs for sanding
• 8@4 ½” cut off wheels for your grinder
• 4 ½” flat wire wheel for your grinder
• 1, combination screwdriver
• 1 Tool box, approximately 20" x 7" x 8"in size (do not buy a large roll away type toolbox)
• 3 Combination padlocks
• 1 Clipboard
• 1 Drafting kit or equivalent (available online or at the Campus Bookstore) to
consist of the following:
Ø 6" bow pencil compass and divider
Ø 18 x 24" drawing board with metal edges
Ø 24" transparent edge T-square
Ø 8" 45°/90°, 10" 30°/60° triangles
Ø 6" semicircular protractor
Ø Sandpaper pointer pad
Ø 2H and 4H pencils, sharpener
Ø Soft pencil eraser, art gum eraser, erasing shield
Ø 3/4" x 10 yard roll of drafting tape or drafting dots
