TEST QUESTIONS MMPV TOPIC 1

What does AAE mean?

Select one:
a. Advance opening exhaust valve.
b. Advance opening intake valve.
c. Delay in closing the exhaust valve.
d. Delayed closing of the intake valve.

2. The mission of the radiator is:

Select one:
a. Cool the coolant coming from the engine.
b. Increase the temperature of the cooling liquid.
Send the coolant to the engine with enough pressure to produce the
explosion.
d. Remove the impurities from the refrigerant liquid.

3. The turbocharger is formed:

Select one:
a. By two valves connected by a turbine.
b. By two axes connected by a turbine.
c. For two turbines connected by a shaft.
d. By two silencers connected by an axis.

4. The throttle potentiometer:

Select one:
Send a signal to the U.C of the number of butterflies that the vehicle has.
b. Send a signal to the U.C of the vehicle's air temperature.
c. Send a signal to the U.C of the position occupied by the gas butterfly.
d. He is responsible for making the gas butterfly fly.
.
5. The air-oil exchanger:
Select one:
It is an engine that circulates the oil.
It is a radiator through which coolant fluid circulates.
It is a radiator through which oil circulates.
It is a pump that circulates the oil.

6. The classification according to SAE:

Select one:
a. It indicates the expiration date of the oil.
b. Check how many kilometers you need to change the oil.
c. Measure the viscosity of the oil and the minimum operating temperature.
d. Control the quality of the oil.
7.Current vehicles are cooled by:
Select one:
a. Water.
b. Refrigerant liquid.
c. Oil.
d. Air.

8. The connecting rod is divided into three parts:

Select one:
a. Foot, body, and head.
b. Foot, head and bolt.
c. Piston, body and head.

9. The temperature sensor is responsible:

Select one:
a. To stop the water pump.
b. To open the thermostat.
c. Send an electric signal to the control panel.
d. Turn on the radiator.

10. The saw blade will always have teeth:

Select one:
a. Backwards.
b. Forward.
c. One can change from back to front when the teeth are exhausted.
d. It is indifferent.

11. The distance between two consecutive crests of a thread is called:

Select one:
Step.
b. Interior diameter.
c. Angle of thread.
d. Outer diameter.

12. The connecting rod...

Select one:
a. Join the engine block with the cylinder head.

b. Connect the flywheel with the crankshaft.

c. Connect the piston to the crankshaft
d. Join the segments with the piston.

13. The identification of threads is determined by:

Select one:
Thread comb.
b. Rasp
c. Thickness gauges.
d. Extractor.
14. The mission of the catalyst is:
Select one:
a. Recirculate the exhaust gases.
b. Inform the U.C. of the amount of exhaust gases.
c. Inform the U.C about the recirculation of gases.
d. Eliminate the pollutants.

15. The element that alerts us to the lack of oil pressure, sending a signal
electrical to the control panel is:
Select one:
a. The oil cooler.
b. The viscometer.
c. The discharge valve.
The hand contact.

16. The fan starts operating.

Select one:
a. When the temperature of the refrigerant liquid rises.
b. When we stop the engine.
c. When starting the engine.
d. When the temperature of the refrigerant liquid decreases.

17. One inch corresponds to:

Select one:
25.4 millimeters.
b. 12 feet.
c. 3 feet.
d. 3 yards.

18. The camshaft

Select one:
a. It has half as many rockers as valves the engine has.
b. It has as many cams as there are valves in the engine.
c. It has double the number of camshafts than the number of valves the engine has.

d. The number of camshafts has nothing to do with the number of valves.

19. The engine block has some plugs:

Select one:
a. For engine cleaning.
b. To avoid cracks in case of extreme temperatures.
c. To make the oil changes.
d. To make the refrigerant fluid changes.

20. The timing belt and chain must be replaced:

Select one:
at 120,000 km.
b. According to the manufacturer's instructions.
c. At 100,000 Km.
d. At 60000 Km.
21. The crankshaft...
Select one:
It has a series of holes to allow the passage of oil to the flywheel.
b. It has a series of holes to allow the passage of water to the flywheel.
c. It has a series of holes to allow the passage of water to the connecting rod bushings and
of the bench.
It has a series of holes to allow the passage of oil to the connecting rod bushings.
and from the bench.

22. What does RCA mean?

Select one:
a. Delay in closing the exhaust valve.
b. Valve opening advance for admission.
c. Advance opening exhaust valve.
d. Delay in closing the intake valve.

23. The function of the crankcase ventilation circuit is:

Select one:
a. Expel the fresh gases outside.
b. Expel the burned gases to the outside.
c. Redirect the gases to the exhaust manifold.
d. Redirect the gases to the intake manifold.

24. The mission of the lambda probe is:

Select one:
a. Inform the U.C. of the motor's turn.
b. Inform the U.C. of the engine's number of revolutions.
c. Inform the U.C. of the amount of fuel in the vehicle's tank.
d. Inform the U.C. about the amount of oxygen in the exhaust gases.

25. The oil pump:

Select one:
a. She is in charge of stopping the circulation of the oil through the circuit.
b. It is responsible for stopping the flow of fuel through the circuit.
c. She is responsible for circulating the fuel through the circuit.
d. She is responsible for circulating the oil through the circuit.

26. The intake manifold is responsible for:

Select one:
To bring the gases into the combustion chamber.
b. To circulate the refrigerant through the engine.
c. To direct the gases to the exhaust pipe.
d. To circulate the oil through the engine.

A destorgolpe is a tool.
Select one:
a. It is a set of flat and star screwdrivers.
b. It is a set of torx and allen screwdrivers.
c. A striking hammer with a screwdriver at the tip.
d. That the turn is made when it is struck with a mallet on the back.
28. One of the functions of the flywheel is:
Select one:
a. To move the camshaft.
b. To give motion to the crankshaft.
c. Stabilize the engine rotation.
d. To move the connecting rods.

29. The crankshaft...

Select one:
a. Make the mixture of air and diesel.
b. It transforms rotational motion into linear motion.
c. It transforms linear motion into rotational motion.
d. Prepare the air-fuel mixture.

30. What element holds the piston with the connecting rod?
Select one:
a. Lever.
b. Bolt
c. Bearing.
d. Crankshaft

31. The clamps are tools:

Select one:
a. Tightening.
b. Of fastening.
c. Of striking.
d. Of the cut.

32. The injector pump system:

Select one:
a. Integrates the pump and the injector into the same body.
It is widely used in gasoline vehicles.
c. It has a pump injector for all cylinders.
It is exactly the same as the common rail system.

33. The oil pan is the component where it is stored:

Select one:
a. The oil.
b. The set of liquids from all the circuits of the vehicle.
c. The water.
d. The refrigerant.

34. The lubrication system:

Select one:
It keeps the engine components lubricated.
b.All the previous answers are correct.
c. Evacuate the heat from the engine.
d. It helps the segments so that there is no compression leakage in the cylinders.
The water pump:
Select one:
a. She is responsible for circulating the refrigerant liquid through the circuit.
b. She is in charge of circulating the fuel through the circuit.
c. She is responsible for stopping the flow of fuel through the circuit.
It is responsible for stopping the flow of the refrigerant liquid through the circuit.

36. Which of these statements is correct?

Select one:
a. The crankshaft and the camshaft are not synchronized.
b. Each turn of the crankshaft, two of the camshaft.
c. Every three turns of the crankshaft, one of the camshaft.
Every two turns of the crankshaft, one of the camshaft

37. The fixed parts of the engine are:

Select one:
a. Block, piston, and connecting rod
b. Block, head and crankcase
c. crankshaft and flywheel
d. Rod, piston and pin.

38. To avoid overpressure, the oil pump is equipped with:

Select one:
a. From a pressure exchangers system.
b. From a discharge valve.
c. From a sieve that filters impurities.
d. From a pressure filter.

39. The greasing segment is located.

Select one:
a. Like the highest segment.
b. Always in the middle.
c. Like the lowest segment.
d. Its position is indistinct according to the manufacturer.

40. The single-point fuel system:

Select one:
It is widely used in diesel fuel.
b. There is one injector for all the cylinders.
There is one injector per cylinder.
It is made up of a pump injector.

41. The vehicle's coolant must be replaced:

Select one:
a. According to the manufacturer's instructions.
b. Every time we change the oil.
c.Every year.
Every two years.
42. Classification according to API:
Select one:
a. It indicates the expiration date of the oil.
b. Measure the viscosity of the oil and the minimum operating temperature.
c. Control the quality of the oil.
d. Control how many kilometers you need to change the oil.

43. The thermostat is a component:

Select one:
a. From the escape circuit.
b. From the cooling circuit.
c. From the lubrication circuit.
d. From the power supply circuit.

The boot loader is primarily used for

Select one:
a. Remove pins.
b. To cut any type of incisions.
c. To make small incisions
d. Mark before drilling.

45. The mission of the flow meter is:

Select one:
a. Control the amount of fuel that is in the tank.
b. Control the amount of fuel in the engine.
c. Send the gases from the tank to the intake manifold.
d. Control the amount of fuel in the tank.

46. The thermostat :

Select one:
a. It prevents the circulation of refrigerant to the radiator until it reaches a
determined temperature.
b. None of the answers are correct.
c. The two above are correct.
d. It prevents the circulation of refrigerant to the engine until it reaches a
determined temperature.

47. The four strokes of an internal combustion engine are in the following order:
Select one:
a. Admission, compression, explosion, and exhaust.
b. Compression, intake, explosion, and exhaust.
c. Admission, escape, compression, and escape.
d. Admission, explosion, compression, and exhaust.

48. The heaters or glow plugs:

Select one:
They heat the diesel in the tank.
They heat the combustion chamber.
They create the spark in gasoline engines.
They make the spark jump in diesel engines.
49. The space between the cylinder head and the TDC is called:
Select one:
a. Combustion chamber.
b. Intake manifold.
c. Air chamber.
d. Escape chamber.

50. Whitworth threads are measured in:

Select one:
a. Decimeters.
b. Inches.
c. Millimeters.
d. Thread pitch.