Network Transmission
NS3502-8P-2T-2S
8-Port Gigabit PoE+ Managed Switch
NS3502-8P-2T-2S
8-Port Gigabit Ethernet PoE+ Plus 2 RJ45 Ports and 2
SFP Ports Managed Switch
OVERVIEW
For fast and efficient connectivity from the network edge to a Full Power, Isolated per Port PoE
backbone switch or server, the IFS® 8-Port Gigabit PoE+ Managed This Gigabit PoE+ Managed Switch helps optimize deployment
Switch by Interlogix features eight 10/100/1000Mbps Ethernet ports and safe power management to PoE edge devices such as IP
plus support for PoE+ (30w) and 2 RJ45 ports and SFP ports. Both Surveillance cameras, access control panels, wireless access points
100Base-X or 1000Base-X transmission is supported through two (WAP) and Voice over IP (VoIP). Full power PoE-at (30w) is provided
SFP interfaces. to all 8-ports with no power sharing, and added port circuit protection
isolates and prevents power interference between ports.
Robust Layer 2 Features
For efficient switch management, the IFS 8-Port Gigabit PoE+ Built-in Monitoring, Diagnostics and Trouble-shooting Tools
Managed Switch is easily programmable via a simple, yet powerful The IFS 8-Port Gigabit PoE+ Managed Switch can be configured to
Web Interface, the switch can manage Port Speed Configuration, monitor a connected PD (Powered Device) status in real-time via IP
Port Link Aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, Port ping. If a PD (IP Camera, IP Access Reader, IP Intercom, VoIP phone,
Mirroring, Spanning Tree and ACL security. The switch includes Wireless Access Point) no longer responds to a ping, the switch
advanced features such as Multicasting with IGMP snooping and will cycle PoE power on the port thus rebooting the PD back to
query, QoS (Quality of Service), broadcast storm and bandwidth operational status. This along with PoE monitoring, management
control to enhance bandwidth utilization. and scheduling for energy-savings, built-in cable diagnostics, and
support for SNMP can help enhance the IT administrator’s trouble-
This switch supports standard Simple Network Management Protocol shooting and management abilities, potentially saving time and labor
(SNMP) and includes an advanced SNMP feature set to monitor while keeping network downtime to a minimum.
the status of the switch and traffic per port. The switch can also be
monitored via any standards-based SNMP management software.
Engineered for Real-time Performance
This switch is designed with a high performance non-blocking switch
fabric and provides wire-speed throughput as high as 24Gbps for
quality of service.
interlogix.com/ifs
STANDARD FEATURES
Physical Ports Quality of Service
• 8-port 10/100/1000Base-T Ethernet RJ-45 with IEEE 802.3af / • Ingress Shaper and Egress Rate Limit per port bandwidth control
802.3at PoE Injector
• 8 priority queues on all switch ports
• 2 10/100/1000Base-T Ethernet RJ-45 uplink ports
• Traffic classification
• 2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
• IEEE 802.1p CoS
• RS-232 RJ45 console interface for basic management and setup
• IP TOS / DSCP / IP Precedence
Power over Ethernet
• IP TCP/UDP port number
• Complies with IEEE 802.3af Power over Ethernet End-Span PSE
• Typical network application
• Complies with IEEE 802.3at high-power Power over Ethernet End-
• Strict priority and Weighted Round Robin (WRR) CoS policies
Span PSE
• Supports QoS and In/Out bandwidth control on each port
• Up to 8 ports for IEEE 802.3af / at devices powered
• Traffic-policing policies on the switch port
• Supports PoE Power up to 30.8 Watts for each PoE port
• DSCP remarking
• Auto detect powered device (PD)
Multicast
• Circuit protection helps prevent power interference between ports
• Supports IGMP Snooping v1, v2 and v3
• Remote power feeding up to 100m
• Support MLD Snooping v1 and v2
• PoE Management
• Querier mode support
• Total PoE power budget control
• IGMP Snooping port filtering
• Per port PoE function enable / disable
• MLD Snooping port filtering
• PoE Port Power feeding priority
• MVR (Multicast VLAN Registration)
• Per PoE port power limit
Security
• PD classification detection
• IEEE 802.1x Port-Based / MAC-Based network access
• PD Alive check/reboot
authentication
Layer 2 Features
• Built-in RADIUS client to co-operate with the RADIUS servers
• Back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow
• TACACS+ login users access authentication
control (Full-Duplex)
• RADIUS / TACACS+ users access authentication
• High performance of Store-and-Forward architecture and run/CRC
filtering • IP-Based Access Control List (ACL)
• Storm Control support • MAC-Based Access Control List
• Multicast / Unknown-Unicast / Broadcast • Source MAC / IP address binding
• Supports VLAN • DHCP Snooping to filter DHCP messages
• IEEE 802.1Q Tagged VLAN • Dynamic ARP Inspection discards ARP packets with invalid MAC
address to IP address binding
• Up to 255 VLANs groups, out of 4094 VLAN IDs
• IP Source Guard
• Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
• Auto DoS rule to help defend DoS attack
• Private VLAN Edge (PVE)
• IP address access management
• Protocol-Based VLAN
Management
• MAC-Based VLAN
• Switch Management Interfaces
• Voice VLAN
• Console / Telnet Command Line Interface
• Supports Spanning Tree Protocol
• Web switch management
• STP, IEEE 802.1D Spanning Tree Protocol
• SNMP v1, v2c, and v3 switch management
• RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
• SSH / SSL secure access
• MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by
VLAN • Four RMON groups (history, statistics, alarms, and events)
• BPDU Guard • IPv6 IP Address / NTP / DNS management
• Supports Link Aggregation • Built-in Trivial File Transfer Protocol (TFTP) client
• 802.3ad Link Aggregation Control Protocol (LACP) • BOOTP and DHCP for IP address assignment
• Maximum 6 trunk groups, up to 8 ports per trunk group • Firmware upload / download via HTTP / TFTP
• Up to 24Gbps bandwidth (Duplex Mode) • DHCP Relay
• Provides Port Mirror (many-to-1) • DHCP Option 82
• Port Mirroring to monitor the incoming or outgoing traffic on a • User Privilege levels control
particular port • NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) Protocol
• Cable Diagnostic technology provides the mechanism to detect and
report potential cabling issues
• Reset button for system reboot or reset to factory default
Specifications
Physical Ports NS3502-8P-2T-2S
PoE Ports (RJ45) 8 x 10/100/1000Base-T
Non-PoE Ports (RJ45) 2 x 10/100/1000Base-T
SFP Uplink Ports 2 x 1000Base-SX/LX/BX SFP interfaces (also compatible with 100Base-FX SFP)
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Performance
Switch Architecture Store-and-forward
Switch Fabric 24Gbps (non-blocking)
Switch Throughput 17.76Mpps @ 64Bytes
MAC Address Table 8K entries
Share Data Buffer 1392 Kilobytes
Maximum Frame Size 9K Bytes (Jumbo Frames)
Flow Control Back pressure for Half-Duplex; IEEE 802.3x Pause Frame for Full-Duplex
Layer 2 Functions
Management Interface Console, telnet, Web browser, SSH/SSL secure access, SNMPv1 and v2c and v3c
Port Configuration Port enable/disable. Auto-negotiation. 10/100/1000Mbps full-and-half duplex mode selection. Flow control enable/disable
Port Status Display each port’s speed duplex mode, link status and flow control status.
Port Mirroring TX/RX/Both; 1 to 1 monitoring
ACL Rate Limiter Ingress: 100Kb~1000Mbps, Egress: 100Kb~1000Mbps
IEEE 802.1q tagged-based VLAN, up to 255 VLANs groups, out of 4094 VLAN IDs Port-based VLAN. Q-in-Q tunneling GVRP for VLAN management, Private
VLAN
VLAN Edge (PVE) protected port with two protected port groups
Link Aggregation Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Protocol) Supports 6 groups of up to 8-port trunk, IEEE 802.3ad LACP
8 priority queue
Quality of Service (QoS)
Traffic classification based on: • Port priority • 802.1p priority • DSCP/TOS field in IP Packet
Multicasting/IGMP IGMP Snooping (v1, v2, v3). IGMP Query. Up to 255 multicast groups
Access Control List IP-based Layer 3/Layer 4 ACL. Up to 256 ACL rule entries
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 EtherLike MIB
SNMP MIBs RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3,9)
RFC-2737 Entity MIB
POWER-ETHERNET-MIB
Power over Ethernet
PoE Standard IEEE 802.3af / IEEE 802.3at
PoE Power Supply Type End-Span (PSE)
PoE Power Budget 200 Watts
Max. number of Class 2 PD 8
Max. number of Class 3 PD 8
Max. number of Class 4 PD 6
PoE Power Output Per Port 54 VDC max. 30 W
Power Pin Assignment 1/2(+), 3/6(-)
LED Indicators & Switch
Power/FAN/SYS Alert On/Green; On/Failure
10/100/1000Base-TX/PoE Ports (8) 10/100 LNK/ACT - Green; 1000 LNK/ACT - Green; PoE in Use - Amber
10/100/1000Base-TX/Non-PoE Ports (2) 10/100 LNK/ACT - Green; 1000 LNK/ACT - Amber
100/1000Base-X/SFP Ports 10/100 LNK/ACT - Green; 1000 LNK/ACT - Amber
System reboot: push and hold < 5 sec.
Reset Button
Factory default: push and hold > 5 sec.
Electrical and Mechanical
AC Power Input Voltage 100~240VAC, 50/60Hz, Auto-sensing
Full Load Power Consumption 280 Watts
Dimensions (W x D x H) 13 x 7.9 x 1.7 in., (330 x 200 x 44mm)
Weight 4.41 lbs., 2kg
Environmental
Operating Temperature 0°C~+50°C
Storage Temperature -20°C~+70ºC
Relative Humidity 0%~95% (non-condensing)
Standards Compliance
Regulatory Standards FCC Part 15 Class A; CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of service
IEEE/RFC Standards IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.3af and 802.3at Power over Ethernet
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
NS3502-8P-2T-2S
8-Port Gigabit PoE+ Managed Switch
Dimensional Diagrams
7.87 in.
(200 mm)
13.0 in.
(330.2 mm)
2 4 6 8 10
8-Port Gigabit PoE+ Managed Switch
2 4 6 8 10 12
LNK ACT
Console
1.73 in.
(44 mm)
Alert FAN 1000 Mini-GBIC
LNK ACT SYS 1 3 5 7 9 11
PoE In-Use
PWR RESET
NS3502-8P-2T-2S PoE
115200,N,8,1
1 3 5 7 9 11 12
Ordering Information
NS3502-8P-2T-2S 8-Port Gigabit PoE+ Managed Switch
User’s Manual CD, Quick Installation Guide,
Included
AC Power Cord, Console Cable, Rubber Feet,
Accessories
Rack Mount Ears with Screws
Note: This switch requires a Small Form-factor Pluggable (SFP) for
optical uplink use. IFS SFPs are available for multi-mode, single mode,
and 1 or 2 fibers for various transmission distances over optical fiber.
Please refer to the IFS SFP data sheet to select the appropriate SFP
for your particular application needs. IFS S20 or S30 Series SFPs are
recommended.
Accessories
SFP S30 Series
SFP S35 Series (wide-temp)
SFP S20 Series
SFP S25 Series (wide-temp)
interlogix.com
Specifications subject to change without notice.
© 2016 United Technologies Corporation.
All rights reserved.
All trademarks are the property of their respective owners.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
2016/11 (GSP-2111)
