Journal of Technology Research (JTR)

Volume 5, Issue 1, (2025), pp 000-000, ISSN 3005-639X

Title of the Paper (16 POINT, BOLD, TIMES NEW ROMAN)

First Author 1 , Second Author *2 , Third Author3 (use 12pt Times New Roman)
1
Affiliation of First Author Department, Faculty, University, City, Country, (use 10pt Times New Roman)
2
Affiliation of Second Author Department, Faculty, University, City, Country,
3
Affiliation of Third Author Department, Faculty, University, City, Country,
*Corresponding author email:

Received: 03-10-202* | Accepted: 14-10-202* | Available online: 15-12-202* | DOI:10.26629/jtr.2025.**

ABSTRACT
The manuscript should contain an abstract of 250 words. The manuscript should have a self-contained,
citation-free abstract and state briefly the purpose of the research, materials and methods in brief, the
principal results and major conclusions. The abstract should be in a single paragraph with running
sentences. Do not use any subheadings or point lists within the abstract. Also, non-standard or
uncommon abbreviations should be avoided, but if essential, they must be defined at their first mention
in the abstract itself.
Keywords: Authors are advised to write 3-5 keywords related to the article. These keywords will be used for
indexing purposes

( )18 ‫العنوان الرئيسي للبحث المقدم (خط‬

)Simplified Arabic
1،2
‫ االسم الثالث‬،2‫ االسم الثاني‬،1‫االسم األول‬
‫ الدولة‬،‫ المدينة‬، ‫ الجامعة‬، ‫ الكلية‬، ‫ القسم‬1
‫ الدولة‬،‫ المدينة‬، ‫ الجامعة‬، ‫ الكلية‬، ‫ القسم‬2

‫ملخــــــــــــــــص البحــــــــــــــــــث‬
‫ا من‬33‫ ويجب أن يكون مستقال وخالي‬،‫ كلمة‬250 ‫يجب أن تحتوي الورقة على ملخص في حدود‬
‫ المواد وطرق البحث بشكل مختصر والنتائج‬،‫ وأن تذكر بإيجاز غرض البحث‬،‫االستشهادات‬
‫ع‬33‫دة م‬33‫رة واح‬33‫ا في فق‬33‫ون الملخص مكتوب‬33‫ا يجب أن يك‬33‫ كم‬.‫الرئيسية واالستنتاجات الرئيسية‬
‫ذلك ينبغي‬33‫ وك‬.‫ل الملخص‬33‫اط داخ‬33‫ة نق‬33‫رعي أو قائم‬33‫وان ف‬33‫تخدم أي عن‬33‫ ال تس‬.‫جمل متواصلة‬
‫د‬33‫ا عن‬33‫ فيجب تعريفه‬،‫ ولكن إذا كانت ضرورية‬،‫تجنب االختصارات غير القياسية أو غير الشائعة‬
.‫ذكرها ألول مرة في الملخص نفسه‬
‫ سيتم استخدام هذه‬.‫ كلمات رئيسية مرتبطة بالمقالة‬5-3 ‫ ُينصح المؤلفون بكتابة‬:‫الكلمات الدالة‬
.‫الكلمات الرئيسية ألغراض الفهرسة‬

J Technol Res. 2025;1:**-**. https://jtr.cit.edu.ly

“Articles published in J Technol Res are licensed under a Creative Commons
Attribution-NonCommercial 4.0 International License.”
 2 xxxxxxx

( )
1. INTRODUCTION ∞
nπx nπx
f ( x )=Ta 0 + ∑ a n cos + bn sin
Most papers start with an introduction. It n=1 L L
contains a brief idea of the work, requirements (1)
for this research work, a problem statement,
and the authors' contribution towards their 4. RESULTS AND DISCUSSION
research. Recent references [1] should be This section may be divided into subheadings
included to show previous work done and the or combined. A combined results and
importance of current work. This section discussion section is often appropriate. This
should be brief, with no subheadings unless should explore the significance of the results of
unavoidable [2, 3]. State the objectives of the the work; don’t repeat them. Avoid extensive
work and provide an adequate background citations and discussions of published
related to your work, avoiding a detailed literature.
literature survey or a summary of the results.
4.1 Figures and Tables
2. MATERIALS AND METHODS
Authors are supposed to embed all figures and
This part should contain sufficient detail to tables in an appropriate place within the
reproduce reported data. It can be divided into manuscript. Figures and tables should be
subsections if several methods are described. properly numbered with a descriptive title.
Methods already published should be indicated Each figure/table must be mentioned within the
by a reference [4], only relevant modifications text by referring to the corresponding
should be described. figure/table number. Any unmentioned or
unnumbered figure/table will be dropped from
3. THEORY AND CALCULATION the publication.
The theory should extend, not repeat, the Tables should be prepared using the table tool
background to the article already dealt with in within Microsoft Word and cited consecutively
the introduction and lay the foundation for in the text. Every table must have a title, which
further work. In contrast, calculations represent must be placed above the table and if
a practical development on a theoretical basis. numerical measurements are given, the units
should be included in the column heading. The
3.1 Mathematical Expressions and Symbols
formatting requirements have been
Mathematical expressions and symbols should summarized in Table 1.
be inserted using the equation tool of
Microsoft Word. References may be added for
used equations to support their authenticity,
e.g. this result has been analysed using the
Fourier series [5].

J Technol Res. 2025;*:**-**. https://jtr.cit.edu.ly

 3 xxxxxxx

Table 1. Summary of formatting requirements for the papers.

Layout Size Margin
Single column A4 (21 cm × Top = 2.5 cm
29.7 cm) Bottom = 2.5 cm
Left = 2.5 cm
Right = 2 cm
Font Article Title Headings Subheadings Reference Text
list
Times New Times New Times New Times New Times New
Roman, 16 Roman, 11 pt, Roman, 10 Roman, 10 Roman, 11
pt, Bold, Bold, Left aligned pt, Bold, pt, Justified pt, Justified
Centered Italic, Left
aligned
Line Spacing 1.15 1.15 1.15 1.15 1.15
Page number We will
format and
assign page
numbers

All figures should be cited in the paper in the research work, its applications, limitations
consecutive order. Figures should be used in and recommendations. Do not use any
bitmap formats (Photoshop, TIFF, GIF, JPEG, subheadings or point lists within the
etc.) with at least 300 dpi resolution unless the conclusion.
resolution is intentionally set to a lower level
for scientific reasons. If a bitmap image has 6. ACKNOWLEDGMENT
labels, the image and labels should be All acknowledgements (if any) should be
embedded in separate layers. included in a separate section before the
references and may comprise a list of people
who contributed to the work in the manuscript
but were not listed in the author list, supporting
grants, presentations, and so forth. The names
of funding agencies should be written in full.

REFERENCES
References should be numbered in the order of
their appearance in the text, including citations
in tables and legends. They should be listed
Fig 1. Conference information poster.
individually at the end of the manuscript. We
recommend using a bibliography software
5. CONCLUSIONS package such as EndNote, ReferenceManager,
or Zotero to ensure accuracy and avoid
Each manuscript should contain a conclusion
duplicate references or typing errors. Include
section, which may contain the main outcome
the digital object identifier (DOI) for each
of the work, highlighting its importance and
reference whenever possible.
relevance. Conclusions should be written in a
continuous manner with running sentences, In the text, reference numbers should be
which normally contain the main outcome of enclosed in square brackets [ ] and placed

J Technol Res. 2025;*:**-**. https://jtr.cit.edu.ly

 4 xxxxxxx

before the punctuation marks. For example,

[1], [1, 2], or [1–3]. When citing a specific
page or range of pages within the text, use both
parentheses and brackets to indicate the
reference number and page numbers. For
instance, [5] (p. 10) or [6] (pp. 101–105).
When citing articles [1] or a chapter in a book
[2] or a book [3] or unpublished work [4] or
personal communication [5] or conference [6]
or a thesis [7] or dissertation [8] you have to
write the reference as given below. When
citing a website, write the URL and the date of
visiting the site [9].
[1] Author 1, A.B.; Author 2, C.D. Title of the
article. Abbreviated Journal Name, Year,
Volume, pages range.
[2] Author 1, A.; Author 2, B. Title of the chapter.
In Book Title, 2nd ed.; Editor 1, A., Editor 2,
B., Eds.; Publisher: Publisher Location,
Country, Year; Volume, pp. 154–196.
[3] Author 1, A.; Author 2, B. BOOK TITLE, 3rd
ed.; Publisher: Location, Country, Year; pp.
154–196.
[4] Author 1, A.B.; Author 2, C. Title of
Unpublished Work. Abbreviated Journal
Name year, a phrase indicating publication
stage (submitted; accepted; in press).
[5] Author 1, A.B. (University, City, State,
Country); Author 2, C. (Institute, City, State,
Country). Personal communication, Year.
[6] Author 1, A.B.; Author 2, C.D.; Author 3, E.F.
Title of Presentation. In Proceedings of the
Name of the Conference, Location of
Conference, Country, Date of Conference
(Day Month Year).
[7] Author 1, A.B. Title of Thesis. MSc. Thesis,
Dept., University, Location of University,
Date of Completion.
[8] Author 1. A.B. Title of dissertation. Ph.D.
dissertation, Dept., University, Location of
University, Date of Completion.
[9] Title of Site. Available online: URL (accessed
on Day Month Year).

J Technol Res. 2025;*:**-**. https://jtr.cit.edu.ly