In our homes, we need products that help us clean floors, bathrooms, etc.

We have managed to create some formulas that will be very useful in our homes and that
we can make and sell

FORMULA TO PREPARE CLEANING PRODUCTS

AND OTHERS
AXION TYPE PASTE SOAP

1 Sulfonic Pasta .............8 ounces

2 Water ............................5 ounces
3 Neutral Talc................ 1 ½ pound
4 Sodium Percarbonate .....6 ounces
5 Sodium sulfate... .......8 ounces
6 Flavors of Color

PROCESS

Mix the 1 and the 2 and when they are well mixed add the 3 and continue mixing. When
this all integrated add the 4 and the 5 and at the end the 6

If we want it to be harder, we triple the amount of Sodium Sulfate.

The Perborate is not only a preservative but also a softener.

The flour should be sifted before mixing it so that it is easier to mix and to avoid any
strange element.
ShareFacebook
Vistas:13486
Responses to this discussion
 Permanent link Response from Martha Lucia on June 30, 2013 at 11:20 AM

TOILET AND FLOOR CLEANER

For a gallon

1 Muriatic Acid ..........................one and a half liters

2 Water .............................................two and a half liters
3 Phosphoric Acid ............................eight ounces (half a pound)
4 Quaternary ammonium at 80% ..........2 ounces

PROCESS

Dissolve the one in the two and then the three and after that the four

Always respect the indicated order.

The one is a stripping agent

The three is a rust remover
The four is an antibacterial agent

This product should be prepared in an open area and with utmost caution due to the
type of acid that are used.
 Permanent link Response from Martha Lucía on June 30, 2013 at 11:21 AM

GEL DEGREASER FOR HANDS

1 Carbopol 940 1 ounce

2 Water..................... 3.5 liters
3 Glycerin............. 4 ounces
4 Colors to taste
5 Triethanolamine 2.5 ounces
6 Butylene Glycol .............5 ounces
7 Glindat Plus.. media ounce
8 silica arena......... 4 ounces
PROCESS

Dissolve one in two by shaking moderately until fully mixed

uniformly, then add the 3 and the 4 and neutralize with the 5 and let rest for a
time until thick and add the six and then the seven and the eight.

If desired, a fragrance can be added.

Permanent linkResponse from martha lucía on June 30, 2013 at 11:25 AM

SINK

For 1 gallon
1-Texapon N70 14 Ounces
2-Coperlan KD 2 Ounces
3-Citric Acid ½ Ounce
4-Ground Salt 4 Ounces
5-Water 3.5 Liters
6-Color to Taste
7-Glidant (Conservant) ½ Ounce
8-Fragrance to Taste

PROCESS:
Mix the Texapon N70, the Coperlan KD, the Citric Acid and the Ground Salt. Shake.
adding the water gradually. The color is added and then the Glidant Plus and the
Fragrance.

Texapom: Foaming agent - Lauryl is also known by this name, there are
various types of texapom, it is a dehairing agent.
Sulfonic Pasta: Alkaline foaming agent, decolorizer, degreaser.
Soda ASH: Bleaching agent.
Sodium chloride (Table Salt): To give viscosity, adjust the viscosity levels.
Glidanth: Preservative

Permanent linkResponse from Martha Lucía on June 30, 2013 at 11:26 AM

Softener

For 1 gallon

1-Cellulose .................................½ Ounce

2-Water 1 Gallon
3-Color to Taste
4-Triethanolamine..................... ½ Ounce
5-Polectron .............................1.5 Ounce
6-Formaldehyde .............................. 2cc
7-Fragrance.......................... 1 Ounce

PROCESS:
Dissolve the Cellulose in Water. Add the Color, then neutralize with Triethanolamine.
and add the Polectron, Formaldehyde, and the Fragrance.

Permanent linkResponse from Martha Lucia on June 30, 2013 at 1:32 PM

DETERGENT FOR WASHING MACHINE

For one gallon

DETERGENT FOR WASHING MACHINE

For a gallon

1- Texapon N-70 ___________ 20 ounces

2 - Sulfonic Paste __________ 2 Ounces
3- Soda Ash Light __________ ½ Ounces
4 - Ground Salt ______________ 4 Ounces
5- Water ___________________1 Gallon
6- Color to taste
7- Fragrance ________________ ½ Ounces
8- Formaldehyde or Sodium Benzoate _______ 2 cc or ½ ounce

Mix the 1, 2, 3, and 4, shake moderately softly, then add the 5 slowly.
little by little and then add the 6, 7, and 8 and let it rest for two hours or until the
foam disperses.

The products must be mixed in the indicated order.

1- Texapon N-70 ___________ 20 ounces
2- Sulfonic Pasta __________ 2 Ounces
3- Light Soda Ash __________ ½ Ounces
Ground Salt ______________ 4 Ounces
5- Water ___________________1 Gallon
6- Color to taste
7- Fragrance ________________ ½ Ounces
8- Formaldehyde or Sodium Benzoate _______ 2 cc or ½ Ounce

Mix the 1, 2, 3, and 4, shake moderately.

Permanent linkResponse from Martha Lucia on June 30, 2013 at 1:34 PM

NAIL POLISH REMOVER (ACETONE)

For 1 Gallon

1- Acetone __________________ 1 ¼ gallon

2- Water ____________________ 7 Ounces
3- Glycerin _________________ 1 Ounce
4- Color ____________________ To taste
5- Fragrance _________________ 3cc
6- Nonyl Phenol _______________ 3 cc

Process:

Dissolve the glycerin in the water, add acetone and color.

Separately, mix nonyl phenol and fragrance and add to the previous mixture.

Permanent linkResponse from Martha Lucía on June 30, 2013 at 1:36 PM

AIR FRESHENER

For 1 Gallon

1- Fragrance ___________________ 5 ounces

2- Nonyl Phenol _________________5 ounces
3- Isopropyl Alcohol __________ 1 liter
4- Water ______________________ 1 liter
5- Color ______________________ To taste

Process:

Mix 1 and 2, shake. Then apply the isopropyl alcohol and shake. Finally
put the 4 little by little and finally the 5.

Permanent link Response from martha lucía on June 30, 2013 at 1:39 PM
SOFTENER

1 GALLON

1. LUVIGEL:_______________ 2 OUNCE
2. COMPERLAN KD_________ 0.50 OUNCE
3. WATER_________________ 1 GALLON
4. COLOR TO TASTE
5. FORMAL _______________2 CC
6. FRAGRANCE ___________1 OUNCE
PROCESS

MIX 1-2. SHAKE ADDING THE 3 LITTLE BY LITTLE WITH STRONG MOVEMENT,
PUT IN THE 4-6, THEN PACK.

Permanent link Response from Martha Lucia on June 30, 2013, at 1:42 PM

CHLORO

RAW MATERIAL
FOR 3 GALLONS

1-CHLORO CONCENTRATE (Sodium Hypochlorite).............1 GALLON

2-WATER .............................................2 GALLONS
3-SODA ASH ..................................1 OUNCE
4-Caustic Soda...................... 1.5 OUNCE

PROCESS

DISSOLVE SODA ASH IN WATER AND THEN ADD CAUSTIC SODA AND STIR
UNTIL DISSOLVED, THEN ADD THE CONCENTRATED CHLORINE.

Permanent linkResponse from Martha Lucía on June 30, 2013 at 1:51 PM

FLOOR CLEANING LIQUID TYPE Fabuloso

Product description:
Cleaning and air freshener product similar to Fabuloso on the market with different
aromas, a product that ensures a lasting fragrance, as well as a disinfectant and
cleaning in bathrooms, floors, kitchen walls, laundry, grease removal
dust and dirt.

FORMULATION %
Sodium alkylbenzenesulfonate 6.0
NONYL PHENOL 10 MOLES 3.0
ETHOXYLATED LAURIC ALCOHOL 10 M 3.0
EDTA 0.10
ISOPROPYL ALCOHOL 2.0
FORMAL 0.25
FRAGRANCE 1.0
DYE C.S.S
WATER C.B.P 100% 84.65

Method of preparation:
In the total water of the formulation and in a suitable container, place the e.d.t.a.
until
dissolve it completely.
Place the sodium alkylbenzenesulfonate and heat it to 65°C until completely dissolved.
such dissolution has been made and still in the fire.
Add the lauric alcohol ethoxylate until completely dissolved and remove from heat, add to
continue and vigorously shake ingredients # 2, 5 and 6, shake for 5 minutes and
let it rest.
Add the color and fragrances until the solution is cold.

Permanent link Response from Martha Lucía on July 9, 2013 at 5:05 PM

ANOTHER FORMULA TO MAKE BLEACH

Ingredients:

3 ½ cups of water (875 ml)

½ cup of 12% liquid sodium hypochlorite (125 ml)*

It can be found in drugstores or large pharmacies.

Utensils

wet face mask or a wet cloth

2 thick and damp cloths (20 x 20 cm.) or asbestos gloves
glass cup (preferably measuring)
narrow-mouthed container, made of glass or plastic, with a lid and a capacity of 1 ½ liters
can
reuse the clean and empty containers of cleaners, shampoo, or any other
medium funnel
adhesive label

Preparation:

Using the face mask and thick fabrics or gloves, two are poured into the container.
mugs of
water.
With the help of the funnel, sodium hypochlorite is added, and immediately the rest of the water.
Leave 30
seconds at rest uncovered.
After this time, cover it and shake moderately for 1 minute and then uncover.
to let go
some gas that has formed and is being covered again.

Packaging and Preservation:

It is left in the same container where it was made, the label with the name is placed.
of the product,
date of preparation and expiration and mode of use. The Chlorine is stored in a place
dry, fresh and
out of reach of children with a label WHERE IT CLARIFIES THE CONTENT

Permanent link Response of maximiliano asuaje on November 16, 2014 at

5:58 PM

let's not forget the safety and hygiene measures due to potential risks of
health check out my blog

http://howtomakecleaningproducts.blogspot.com/