www.philco.com.

br
0800 645 8300 All in One PR 2 Multiprocessor

FOR DOMESTIC USE ONLY

Instruction Manual
INTRODUCTION

Congratulations on choosing the All in One BR 2 Food Processor.

To ensure the best performance of your product, carefully read the instructions.

follow. It is recommended not to throw away this Instruction Manual, to keep it.

for any inquiries.

NOTE: It is common for new electrical devices to emit a slight smoke or gas.

during the first times they are used. This happens due to the

heating of the materials and components used in the manufacture of the device. It is

normal and does not indicate the existence of defects in the device.

01
IMPORTANT SAFETY MEASURES

Do not use the appliance if the power cord, plug, or part of the appliance is
damaged. To replace any damaged part, contact Technical Assistance
Authorized, in order to avoid risks.
To protect against electric shocks, do not immerse the electrical cord or the plug.
not the device in water or in another liquid.
Disconnect the plug from the electrical outlet when the appliance is not in use.
before cleaning it or installing its accessories.
Always place the device on a flat and stable surface, away from sources of
heat.
After using the device, set the electronic controls to the '0' position.
Make sure the engine has completely stopped before removing the cover.
The use of accessories not recommended for this device may cause accidents.
personal.
Do not let the power cord hang from tables and counters.
Do not use the device outdoors.
Turn off the device before changing its accessories or getting close to it.
moving parts.
Do not let the electrical cord hang over the edges of tables or counters, or touch
heated surfaces.
Avoid all contact with moving components.
Always ensure that the device is fully assembled and that its lid
be in the correct position and properly secured before turning on the device.

This device has a safety switch and will not operate if the accessories are not
are properly fitted
This device has a protection mechanism against overheating that will turn it off.
the device automatically, wait for about 15 minutes for the engine
cool it down and use it again
Do not operate the device for more than 3 minutes.

The temperatures around the device may increase when it is in

operation be careful when handling.
This device is not designed to be used by persons (including children)
with reduced physical, sensory or mental abilities, or lack of experience and

02
knowledge, unless they are supervised or instructed by a person
responsible for your safety.
Children should be supervised to ensure they do not play with
the device.
Be extremely careful when handling the blades, especially
while assembling, disassembling and cleaning, as the blades are very
sharp.
Never position the device near gas outlets or close to areas with high...
heat intensity such as ovens and stoves
If the food gets stuck, do not use your fingers to push it. Always use the
pusher to push the food down. If this is not possible, turn off the device
unplug your device from the electrical outlet. Then, disassemble the device.
to remove the food that got stuck.
To avoid losing the warranty and to prevent technical problems, do not attempt to fix the
device. If necessary, take it to an Authorized Technical Assistance.
The invoice and the warranty certificate are important documents and must be
kept for warranty purposes.

FOR DOMESTIC USE ONLY

BEFORE FIRST USE

Read all instructions carefully and keep the Instruction Manual for future reference.
queries.
Remove all packaging.
Disassemble the device (see the Maintenance and Cleaning section). Wash all the
removable components to remove any residues resulting from the process of
manufacturing.

03
 COMPONENTS

1. Engine Base;
2.Haste;
3. Container of
processor 14
4.Support of the blades;
5. Container lid; 06
6.Mortar;
7.Adapter disc;
8.Slicer accessory;
09.Cutting blade
10. Juicer filter;
12
11. Squeezer cone;
12. Jar of
blender
13. Sheets of 13
05
blender
14. Feeder nozzle;
15.Control
speeds
04

11

10

03

09
02

08
01

07 P
0 1
2

15

04
 OPERATING INSTRUCTIONS
Using the chopping blade. Insert the blades into the adapter
The chopping blades can be used observing the correct position.
to chop, grind, mix, make
crumbs and shredding chicken breast.
Utilize a table 1 for some
preparation references.

Assembly:
Attention: Before assembling the accessories
make sure the device is
disconnected from the electrical outlet and in the

position off.
Attention: Be careful when handling the
Insert the rod into the base of the motor. blades, as they are very sharp.

Add o desired food in

container respecting the limits
indicated in table 1.
Do not use very large pieces, because
they can damage the bladese o
container, to guarantee better
results cut into small pieces.

Insert the processor bowl into the Place the lid on the container and
turn clockwise to fit it by turning clockwise
tighten firmly at the base of the motor. until it locks. (a 'click' will be heard)

Place the blade adapter on the Fit the pestle into the opening of the lid
haste. container.

Select the operating speed

desired

Attention: This device has a lock for

safety and it will not work if not
is correctly assembled.
05
 Table 1 - Portions and preparation time
Food Quantity Preparation Approximatetime Result
Chocolate Up to 100g Pulsar 10 to 15s Chopped
Cheese Up to 200g Cut into cubes V1, 10 to 15s Chopped
Cut into cubes
Meat Up to 500g or pieces of 3cm V2, 20 to 30s Chopped/Mince
Herbs (parsley,
fresh leaves Up to 100g Wash and dry well V1, 5 to 10s Snack
Fruits and Cut into slices V1, or V2,
Hard vegetables Up to 500g or cubes 30 to 60 seconds Snack
Fruits and
Mole Vegetables Up to 500g Cut into pieces V1, 10 a15s snack
Peel and cut
Onion Up to 500g in 6 to 8 pieces Pulsar 3 to 5s snack
Garlic Up to 500g Just peel V1, 5 to 10s Ground
Cut slices
Bread Up to 200g in four parts V2, 6 to 10s Crumbs
Peel and
Boiled Eggs Up to 400g cut in half V1, 10~20s Chopped
Chicken Breast Up to 300g Cut into pieces V2, 10~15s Shredded

Speed 1
V2 = Speed 2

Usage and Safety Tips. will damage the blade and the container of
Always fit the Blades in processor.
container before adding the Foods that are very should be avoided.
food. hard ones that cannot be cut with
Do not use very large pieces, a common knife.
because they can damage the blades and the To avoid damage to the device, before
container, to ensure better process to remove bones, fats,
results cut into small pieces and pits or peels of foods
equals. Remove the blade before removing the
For softer foods use the food.
function Pulsate a few times so that If the food is not being
they do not fall apart. evenly chopped, remove part
Avoid using a function by time remove from the jar and process quantities
prolonged when cutting cheeses minors at a time.
You will be able to join more than one type of
hard candies or chocolate, as these foods
they can heat and melt. fruit or vegetable to chop and mix,
The standard period for the operation of this but respect the maximum amount of 500g
the function is 120 seconds depending on the for once.
type and quantity of food. •Wait until all accessories
Certain foods should not be before moving it
chopped. To crush ice or to grind coffee beans remove the device cover.

06
Using the accessories
Slicer.
This accessory can be used for slicing
quick and easy food.
Utilize a table 2 for some
preparation references,

Mounting: •Fit the adapter disc already with

accessory connected to the rod.
Attention: Before assembling the accessories
make sure the device is
unplugged from the electrical socket and in
position off.

Attach the desired accessory to the disk

adapter.

•Put the lid on the container by turning it

turn clockwise until it clicks.
will be heard).
Connect the device to the outlet and turn it on.
the desired speed and add the
food through the feeder mouth.
Slowly push with the pestle.
Attention: be very careful when the foods.
mount the accessories on the adapter disc
because the blades are very sharp. Attention: Do not use any other
material to push the food
Insert the rod into the engine base. for example, use cutlery
just the pestle that comes with the
product.

Fit the processor's container in

turn clockwise to
firmly fasten at the base of the engine.

07
 Table 2 - References for preparation
Accessory Type of food
Slicing Accessory Apple, pear, carrot, onion, cucumber, celery, potatoes

Usage and Safety Tips. If a large amount of

If the vegetables are larger than the food needs to be processed
bowl, cut into small pieces do not use the capacity greater than
before inserting into the device. indicated on the container 1200ml, Turn off
turn off the device, empty the container, and return
Push the food slowly to
better effect, when using fruits to use it.
macias e very soft use a Avoid slicing raw meat, for this use
speed 1 in order to prevent that the the chopping blade.
food breaks down and turns into a
broth.

08
Using the Juicer Gradually press the fruit
about the cone to start the extraction of
Fruits.
juice.
Assembly:
Attention: Before assembling the accessories
Usage and Safety Tips.
make sure the device is
unplugged from the electrical outlet and in the Use only speed 1 to
squeeze fruits.
position off.
Prefer fresh fruits, fibrous monos and
Fit the rod into the base of the engine. with thinner shells, as these
have a larger amount of juice.
During o process can occur
excess of pulp on the filter, if that
turn off the device and move it
with a spoon so that the juice contained
drain, then remove the excess, return
to use again
Do not exceed a time greater than 3
minutes of use.
Fit the processor container in the
turn and rotate clockwise to
lock firmly at the base of the engine.

Insert the juicer filter over the

turn the jar 30° clockwise to
fit, then fit the cone.

Cut the oranges in half.

Plug the device into the socket and
select speed 1 to squeeze the
fruits.
09
Using the Blender Usage and Safety Tips.

Assembly: •Hard or more consistent foods

Attention: Before assembling the accessories they must be added in pieces
small ones, through the feeder nozzle
make sure the device is
unplugged from the power outlet and in with the device in operation.
position off. Do not add more than one cup of
solid foods in grains and not
Insert the blender cup to exceeding one minute of operation.
body of the device and turn in the direction
To crush ice, place a glass with
time to secure firmly at the base
water e to add the stones
go motor.
moderately with the device in
functioning.
Do not turn on the device with the cup empty.
Do not use products abrasives
soaps and others, as they can
damage the device.
When handling the blades, be very careful.
be careful because they are very sharp and can
to cause accidents.

10
DISASSEMBLY, CLEANING AND STORAGE
Attention: Disconnect the device from the power supply
Cleaning
electricity before disassembling any
accessory Turn off the device and unplug it from the
Before disassembling, wait for everyone. taken before performing any
the accessories stop moving. cleaning
Remove all accessories; consult
Disassembled the processor item disassembly;
To disassemble o processor é Wash the pieces right after use, as
simple, just follow the sequence dry foods are hard to be
opposite of assembly. removed
Wash all accessories with warm water
Remove the lid of the container by turning it. the neutral detergent. The base of the engine
counterclockwise. it must be cleaned with a damp cloth;
Remove the blade or the disk that is
being used. Attention: Do not wash the engine base.
Remove the adapter from the blades. it can still be damaged, use
Remove the container from the processor. just a damp cloth.
turning counterclockwise
Remove the shaft from the base of the engine. Do not use abrasive products, as
they can damage the device;
Disassembled the juicer of Plastic accessories can be
washed in dishwashers.
fruits
Do not wash accessories that contain
To disassemble the juicer only
blades in the dishwasher, such as
follow the reverse sequence of
how, adapter disk , accessory
assembly.
slicer, filleting accessory, etc.
Remove the cone
Remove the sieve by turning it in the direction Storage
counterclockwise. All accessories they can be
Remove the container from the processorstored in the processor container,
spinning counterclockwise less the squeezer.
Remove the rod from the motor base. Be careful when handling the
blades because they are sharp.
Disassembled the blender Store the product in a clean and dry place.
To dismantle the blender, just
follow the reverse sequence of
mounting.

Remove the jug just by turning it.

counterclockwise.

11
TIPS FOR SOLVING PROBLEMS

PROBLEM CAUSAS PROCEDURE

Device no No power in the outlet. Check if the plug is in.
League. correctly connected.
Check if the house circuit breaker is not
it is turned off.
Test the socket with another type of
any household appliance.
Product connected to the voltage
Check if the device voltage is
incorrect. consistent with the network tension of
nutrition.
The safety latch has come loose. Reinstall the lid and
during operation. properly engage the lock(s)
of security.
Device no is The device has a lock(s) of
correctly assembled (lock security that does not allow you to turn it on

of security). without the lock(s) being

correctly assembled. Follow the
instructions from the manual to make the
correct assembly.
The Device Excess food waste Turn off the device and perform the
lost on the lid or in the collection container cleaning of the lid and the container of
efficiency of waste. waste.
during use.

Little Using food with is not a flaw.

small proportion of juice. Some foods have less juice
amount of
what others. Thus, the proportion of
extracted juice. extracted juice varies between varieties
and the qualities of foods.
The processing of food Reducing the speed of
is occurring in a manner food processing (pressure
very fast. about the pestle), the slower,
better will be the juice extraction.

Device no The food is very hard or not processing food very much
can you not recommended use. hard, which are difficult to
process the cut with a kitchen knife.
food. Remove the pits and seeds from
fruits such as peaches, cherries,
nectarines, etc.

12
 PROBLEM CAUSAS PROCEDURE
The product has stoppedExcessiveeffort during o Wait for 15 to 30 minutes or
to work processing caused super cooling device and continue the
during the warming e disarmed o processing with less
processing internal security device. effort.

Device The device is poorly fitted. Reassemble the device.

vibrates during or on irregular surface. taking care to ensure that all
the use. that the pieces are correct
mounted and placed it on a
firm and flat surface.
Bitter juice. Citrus fruits. Remove the peel of citrus fruits
such as: (orange, tangerine,
lemon etc). To obtain a juice
natural.
Mortar no Mortar it was not fitted Align the groove of the pestle with the
enter correctly. small protrusion located inside the
totally. bowl.

Leak of Loose base of the blades or Check if the bases of the blades are
water during with little pressure. well fitted.
Fit the blades correctly
the use of turning the base counterclockwise
blender schedule until tightening, check the
Blender Cleaning for
more information (care when
handle with the blades because they are
very sharp).
Excess fluid used in Utilize only the maximum level
cup. indicated in the blender cup.

NOTE: In some recipes, there may be liquid leakage onto the lid.
above the blender cup. In this case, use a smaller amount of liquid.

13