HANWHA
Low Density Polyethyene 5306
Blown Film Grade MELT INDEX 3.0
DENSITY 0.921
HANWHA LDPE 5306 is manufactured by DOW tubular high pressure process and designed for
variety of film application such as high transparent package film. LDPE 5306 has well balanced
property of high clarity, mechanical property and processability.
This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.
▣ Outstanding Properties ▣ Processing Conditions
Excellent Optical Property Melt Temperature : 140 ~ 170℃
Good Mechanical Property Blow-up Ratio : 2 ~ 3
Good Processability Optimum Gage Range : 0.025 ~ 0.1 mm
▣ Additives
Anti oxidant, Slip agent, Anti-block agent
▣ Physical Properties
Physical Properties Unit Test Method Value
Melt Index g/10min ASTM D1238 3.0
Density g/cc ASTM D1505 0.921
Vicat Softening Point ℃ ASTM D1525 88
Melting Point ℃ HCC Method 110
Tensile Strength at Break kg/cm2 ASTM D638 110
Elongation at Break % ASTM D638 650
Brittleness Temperature, F0 ℃ ASTM D746 ＜-76
Film Properties Unit Test Method Value
Film Thickness mm HCC Method 0.03
MD 230
Tensile Strength at Break kg/cm2 ASTM D882
TD 180
MD 350
Elongation at Break % ASTM D882
TD 550
MD 90
Tensile Tear Strength kg/cm ASTM D1004
TD 85
Dart Impact Strength g ASTM D1709 85
Haze % ASTM D1003 4.0
1. These are typical properties : not to be construed as specification.
2. The value for this property is dependent on part geometry and fabrication conditions.
Hanwha B/D, 1 Changgyo-dong, Chung-ku, Seoul, Korea. Tel : 82-2-729-2700 Fax : 82-2-729-2999
