Scribd
Upload
10 views1 page

Alignment Measurement Report WAS QMS DI 015 E 16

The alignment measurement report for the vessel 'Magen Defender' was conducted on December 5, 2017, by Pierre Hardy. The measurements indicate that the shaft line is free-moving and within acceptable clearance limits, confirming that the alignments are satisfactory. The report is approved by the repair manager and confirmed by the client representative.

Uploaded by

ekpedemeutip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
10 views1 page

Alignment Measurement Report WAS QMS DI 015 E 16

The alignment measurement report for the vessel 'Magen Defender' was conducted on December 5, 2017, by Pierre Hardy. The measurements indicate that the shaft line is free-moving and within acceptable clearance limits, confirming that the alignments are satisfactory. The report is approved by the repair manager and confirmed by the client representative.

Uploaded by

ekpedemeutip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

ALIGNMENT MEASUREMENT REPORT

Vessel Owner C & I LEASING Unit of Measurement Millimeter


Vessel Name MAGEN DEFENDER Acceptance Criteria Manufacturer
Instructions
Date 12-05-2017 Measurement by Pierre Hardy
Shaft Location STARBOARD SIDE

Position
Remark by WAS QA/QC Personnel: Parallel by Repair Manager: Concentricity
Approved Confirmed by Client Rep.
The clearance was taken with the aid of filler
T disconnected from
gauge; the shaft line was 0.00 +0.25
the gearbox so the shaft line is free moving in
the water bearing andBthe concentric +0.10 -0.30
measurements can be modified. To couple the
P we put by hand
shaft line on the gearbox, +0.15 -0.75
without any tension force.
S
We consider that alignments are ok since it is 0.00 0.00
not out of clearance.

Author Ref. No.: Effective Date Revision Page


Ekpedeme Utip WAS-QMS-DI-015-E16 16-05-2017 00 1 of 1

You might also like