Founded in 1996, Henan Fengbo Automation Co.

, Ltd is a high-tech enterprise focusing on the R&D,

production, marketing and service of constant dynamic metering equipment.

Adhering to the concepts of "technological innovation" and "standard leadership", Fengbo has accumulated
abundant technical strength and experience by cooperating with China Jiliang University and Jinan University
in the establishment of industrial technology research institutes, personnel training, scholarships, etc. We
gathered a batch of young and middle-aged scientific and technological talents, forming a high technical
attainments and reasonable structure R&D team. This team is integrated of scientific research institutions,
group companies, and expert consultants together.

We also established a dynamic metrology research institute, and has complete experimental devices for
constant metering of solid granular materials and powder. Fengbo honored 74 national patents and 24
software copyrights. We are the main author drafted the industry standards of "Coriolis Powder Quantitative
Weighfeeder" and "Quantitative Belt Weighfeeder". Moreover, recommended by the Henan Provincial Bureau
of Quality and Technical Supervision, our industry standard "QB/T4770-2014 Coriolis Powder Quantitative
Weighfeeder" won the third prize of 2018 China Standard Innovation Contribution Award. The company has
been successfully selected for the list of "Gazelle" enterprises in Henan Province，and awarded as a provincial
level specialized, high-end and innovation-driven SMEs, and won the title of single champion in the
manufacturing industry and national intellectual property advantage enterprise.

Main products: double-deck rotor weighfeeder, bulk powder weighfeeder for feeding tank truck, pulverized coal
weighfeeder, raw meal weighfeeder, and granular materials rotor weighfeeder, etc.

After more than 30 years efforts, Fengbo always stand out in front of the dynamic metrology industry, and
makes a huge contributions to the worldwide real-time and environmental-friendly refined production and
management .

南方水泥 西南水泥 中联水泥 天山水泥 北方水泥

祁连山集团
"Gazelle" Enterprises Single Champion In The National-level Specialized Innovative
Manufacturing Industry and Small Giant Enterprise

+86-139-3716-3894 fl[email protected] Version No.: 2024.12

High-tech Enterprise China Standard Innovation
Contribution Award
Chief drafter of Industry Standard
for two products
SPECIALIZED IN DYNAMIC WEIGHING INDUSTRY
FOR MORE THAN 30 YEARS
30
iFB-CRM Coriolis Mass Flow Meter for Feeding of Raw Meal iFB-CRC Coriolis Mass Flow Meter for Feeding of Coal Dust iFB-CCM/CIM/CPM Coriolis Mass Flow Meter for Tank Loading iFB-CGS Air Lock Weigh Feeder
Coriolis Mass Flow Meter for Feeding of coal dust includes Steady Flow Feeder, Mass of Powdered Bulk Materials Air lock feeder,the equipment adopts various methods such as air locking through
Coriolis Weigh Feeder for Feeding of raw meal includes Coriolis Mass Flow Meter and material level, rotor conveying, cleaning material with rotating plate, self-discharge
Flow Meter, Air-solid Injector and FB-DACS5000 Control System. As coal dust is easy
FB-DACS5000 Control System. It has a great effect on improving the stability of kiln cleaning, wear resistance,etc,and effectively preventing the occurrence of equipment
to bridging, fluctuating, or Air upward channeling etc., the Steady Flow Feeder is Tank Loading Mass Flow Meter realizes quantitative and accurate loading and
working conditions, improving the working time and clinker strength, saving energy and
configured to ensure a much more constant mass flow and accurate measurement. one-button operation of powdered bulk materials, greatly improves loading adhesion, jamming, damage and air leakage. Install a load cell at the material inlet,and
prolongs the service life of refractory materials.
efficiency, saving labor costs and improves working environment. At the same improve measurement accuracy of air lock feeder for coming material.
Accuracy: ±0.5% Weighing Range: 30~850m³/h Accuracy: ±0.5% Weighing Range: 3.5~120m³/h time. combining with other intelligent automation devices, the bulk powder
Working principle: The material enter feeding pipe of air lock feeder through belt
process is fully automated, which is a new type of environment-friendly
conveyor discharge chute, The feeding pipe of the air lock feeder is equipped with an
Product Features quantitative tank loading equipment.
induced draft flange. When the material water content is high, hot air can be introduced
1. High material to air ratio saves more electricity. Applicable: Cement, Fly ash, Mineral powder, Alumina powder, Calcium into the inlet of the feeding pipe to heat and dry the material, and prevent material
2. Reasonable use of air to save coal consumption. carbide powder, etc. clumping caused by high water content.
3. Low investment, short lead time.
Accuracy: ±1.0% Weighing Range: 250~1200m³/h Material Particle Diameter: ≤70mm, Max Diameter 200mm
Product Features Steady Flow Device Temperature Tolerance: ≤100℃

Steady flow feeder is a set of steady flow equipment independently developed and designed by our Product Features Product Features
company for powdery materials. lt can buffer, stir and feed the material flow evenly, adjust the speed
1. Like a “gas station”, loading as required quantity. 1. Adopt vertical rotor structure, there is no frictional force in the around of the rotors and low
according to the control requirements to control the material fow. lts steady effect affects the
measurement and control accuracy of whole system directly. Inorder to achieve the best steady 2. One button to start loading automatically. Measuring Range transmission load, the measurement accuracy is high.
Model No.
Production Line Measuring Range effect, the structure adopted horizontal rotary feeding. The form fully ensures the uniform feeding of (m³/h)
Item Model No. 3. Since the release process is automatic and stable, loading is iFB-CCM/CIM/CPM 250E 250 2. It can realize the self-cleaning function of material flow flushing during operation, ensure that
(t/d) (m³/h) powder material, and can be fully adjusted and controlled according to the actual flow. lt can not only
accurate, so the equipment is environment-friendly and can there is no material accumulation inside the rotor chamber and stable operation.
≤2500 iFB-CRM300E 30~300 ensure the uniform and stable of material’s flow, but also adjust and control locking material. iFB-CCM/CIM/CPM 450E 450
improve the working condition. 3. It is fully sealed structure outside the rotors, wear-resistant strip design at the bottom edge of the
iFB-CCM/CIM/CPM 600E 600
3200~4000 iFB-CRM450E 45~450 4. Height of 700mm is enough for installation, and the modification iFB-CCM/CIM/CPM 800E 800
blade, and use wear-resistant plate for the bottom plate to ensure there is no wear or jamming
Kiln Outlet Kiln Inlet
Item Production Line period is as short as 1-2 days. around the blade.
4500~5500 iFB-CRM650E 65~650 iFB-CCM/CIM/CPM 1200E 1200
(t/d) Model No. Measuring Range(m³/h) Model No. Measuring Range(m³/h) 4. Equipped with air inlet at the feeding inlet, which facilitates the introduction of hot air when the
6000~7500 iFB-CRM850E 85~850 material water content is high, and prevent material adhesion and blockage
1 <1000 iFB-CRC07D 3.5~7 iFB-CRC10D 5~10 There are more than 4000 successful applications and a thousand sets are installed in the cement, power,
and metallurgy industry in China.
2 1000-2000 iFB-CRC10D 5~10 iFB-CRC15D 7.5~15 Model No. Motor Power (kw) Measuring Range(t/h) Production Line (t/d)

iFB-DRWF Double-deck Rotor Weigh Feeder 3 2500-3200 iFB-CRC15D 7.5~15 iFB-CRC20D 10~20
iFB-CGS80 3 80
iFB-CGS350 7.5~11 350 2500-4800
Double-deck rotor weigh feeder is composed of measuring feeder body, double-deck rotors,
4 3200-4500 iFB-CRC30D 15~30 iFB-CRC50D 25~50 iFB-CGS500 7.5~11 500 5000-6000
feeder frame, support device, speed measuring device, Load cell measuring device and control
system. The double-deck rotor weigh feeder is a mature rotor feeder technology. Combined with iFB-CGS750 11~15 600 7000-10000
5 4500-6000 iFB-CRC50D 25~50 iFB-CRC80D 40~80
the characteristics of powdery materials, the rotor structure is innovatively improved and the
double-deck rotor is used. The double-deck rotor can realize the effect of physical accumulation 6 6000-7500 iFB-CRC80D 40~80 iFB-CRC120D 60~120
and sealing of powder and locking the pulverized material and air totally. lt solved the material
flushing problem when using the single-layer rotor to measure powder. Note: Fengbo can assist the customer to select the conveying fan and pipeline, and give suggestions on the design of the silo. iFB-WFM/L Belt Weigh Feeder
Applications: it can be used for proportioning and feeding of fly ash, mineral powder and other
Belt Weigh Feeder is a perfect equipment for continuously weighing,
powder materials. iFB-IPL Unmanned Intelligent Loading System feeding and dosing of bulk material and Powder. lt can be widely used in
Accuracy: ±0.5% Weighing Range: 5~300m³/h building material, chemicals, coal, ports, ceramics, food, fertilizer and other
Unmanned intelligent loading system is a new type of intelligent modern equipment composed of
a visual system, operating mechanism, servo control system, and drive motor set. The visual industries.
Product Features system, operating mechanism, and servo control system of this device are closely connected, Accuracy: ±0.5% Weighing Range: 5~1000t/h
achieving automatic lifting and lowering of the bulk bellow, and automatic intelligent adjustment of
1. High Stability
iFB-RBM/RCM Granular Material Metering Scale position to align with the filling inlet of the tank truck. It can effectively solve the problem of
The double-layer rotor has good material and air locking effect, which can inaccurate alignment of the bulk bellow’s outlet during tank truck loading, resulting in repeated
achieve physical accumulation and sealing of powder material, make the Measuring Range
Model No. Height of inlet&outlet(mm) Granular material metering scale has simple metering principle. compact structure, adjustment of the vehicle position and affecting loading efficiency, as well as the safety risks
feeding more stable, and avoid material flushing and interruption.
(m³/h)
can withstand high temperature, low failure rate and easy maintenance. The scale brought by close observation of docking situations.
iFB-WFS Smart Belt Weigh Feeder
iFB-DRWF50 5~50 650 body is fully sealed and will not cause environmental protection problems. There is
2. High Accuracy Smart Belt Weigh Feeder is a perfect equipment for continuously weighing
no need to install special valves, and the discharging speed can be controlled by Product Features and feeding bulk materials with small feeding capacity 20~3000kg/h,lt is a
iFB-DRWF80 8~80 650 its own rotating speed.
Each layer of rotor participates in material locking, feeding, and 1. Automatic intelligent recognition of the inlet of tank truck, with self-learning ability, strong high-tech smart product integrating conveying, weighing and quantitative
measurement, realize 360 degree interval measurement,the accuracy can iFB-DRWF120 12~120 750 Application: it can be used for metering of bulk clinker and aggregate, also adaptability to the environment, and high recognition accuracy. control.
reach ±0.5%; feeding of clinker and other granular materials.
2. lt takes up less space and can be installed with a height of about 450mm above the ground, Application: Medical, food, chemical, tobacco, feedstuff and building material
iFB-DRWF180 30~180 880
3. Small Installation Space Accuracy: ±0.5% Weighing Range: 5~600m³/h equipped with a dust collection interface, it can achieve environmental friendly loading. industries etc.
The inlet and outlet is on one vertical line, and the height between them is iFB-DRWF300 50~300 950
Temperature tolerance: ≤250℃ 3. No need for manual command and frequent vehicle adjustments to improve loading efficiency. Accuracy: ±0.4% Weighing Range: 20~3000kg/h
as low as 650mm,which is applicable to most of plant space on site.
Product Features
1. High temperature resistance, wear resistance, no jamming. The scale body can Product Features
withstand 250℃ and has undergone internal wear-resistant treatment,
1. Single load cell design to avoid error brought by dual load cells during signal transmission, as a result to ensure
significantly reducing wear.
weighing accuracy ±0.4%;
2. The feeding is stable and The discharging speed is adjustable. Variable frequency
speed regulation, discharging speed can be set at will. 2. Weighing plate adopts high strength aircraft aluminum alloy, with forming technology at a time, to ensure flatness and
improve accuracy;
3. The structure of the scale body is fully enclosed, which is environmentfriendly and free
of dust, reduces environmental pollution and improves the working environment. 3. Belt replacement is easy and fast, one person can complete it in a few minutes.