PS15-R2 Loudspeaker

A high power system capable of producing

136dB Peak SPL, the new PS15-R2 Loudspeaker
can be safely driven with up to 2000 Watts of
amplifier power. Controlled by the new, dedicated
PS 15 TDController-R2, or the NXAMP Powered
Controller, the PS15-R2 achieves high SPLs and
Key Features wide bandwidth performance, despite being only
• High-power system (136dB Peak SPL @ 1m) half the weight and volume of common PS15-R2 horizontal coverage, +25°
with 15in LF and 2in HF drivers. trapezoidal loudspeaker systems.
• Rotatable asymmetrical horn and unique
cabinet architecture ensure versatility; user-
adaptable for both PA and stage monitoring Along with the flexible coverage patterns enabled by
applications. NEXO’s proprietary constant directivity asymmetrical
• Two-way, switchable passive or active design dispersion horn, the architecture and weight balance
for precise performance-matching to user of the PS15-R2 are designed to provide both
requirements.
uncompromised PA and stage monitor performance
• Sophisticated control electronics ensure
reliable, linear operation. from a single speaker. PS15-R2 horizontal coverage, 0°
• Supported with a full range of mounting and
flying accessories. Left and Right versions of the PS15-R2 have been
developed to provide a true stereo image –
System Applications particularly important for wedge applications.
• High-power mid-sized touring, installed PA for
clubs, A/V, theater, Houses of Worship, The 2-way passive 8Ω design uses a single amplifier
broadcast, etc. channel to deliver bi-amped performance, reducing
• High-quality, extremely powerful stage monitoring system cost, size and complexity, while the new
for A/V, theatre, cabarets, broadcast, etc. PS15-R2 horizontal coverage, -25°
cabinet design incorporates a pole mount and a new
• Fill-in system for any PA requiring side, down hardware adapter compatible with a vast array of
and near-field augmentation.
touring and fixed installation accessories.

PS15-R2 response
PS15-R2 Loudspeaker

PS15-R2 LOUDSPEAKER PRODUCT FEATURES

Components LF 1 x 15" (38 cm) long excursion Neodymium 8Ω driver.
HF 1 x 2" throat, 3" Titanium diaphragm compression driver + Low Distortion,
Constant Directivity Asymmetrical Dispersion Horn.
Height x Width x Depth 675 x 434 x 368 mm (26.57" x 17.08" x 14.48").
Weight 28 kg (62 lbs).
Speakon Connectors 2x4 pole in & loop thru (switch passive to active inside).
Construction Baltic Birch Ply finished with textured black coating.
Fittings Handles 2 metal recessed pockets.
Front Finish Moulded dark grey metal grille.
Flying Points Two plate connecting with external accessories.
Stand fittings Built in steel stand fitting (35mm / 1 3/8").

SYSTEM SPECIFICATIONS PS15-R2 with PS15 TDController-R2

Frequency Response [a] 50 Hz - 18 kHz ±3 dB.
Usable Range @-6dB [a] 47 Hz - 18 kHz.
Sensitivity 1W @ 1m [b] 102 dB SPL Nominal / 99 dB SPL Wideband.
Nominal Peak SPL @ 1m [b] 133 to 136 dB Peak.
HF Dispersion [c] 50° to 100° Horizontal x 55° Vertical Rotatable Horn, 4 positions.
Directivity : Q & DI [c] Q : 16 Nominal / DI : 12 dB Nominal ( f > 1.5 kHz ).
Crossover Frequencies 1.1 kHz Passive or Active (internally switchable).
Nominal Impedance Passive 8Ω or Active LF 8Ω, HF 16Ω.
Recommended Amplifiers Passive 1000 to 2000 W 8Ω. Active LF 1000 to 2000 W 8Ω / HF 250 to 500 W 16Ω.
Important: Active mode only available on NXAMP.

SYSTEM OPERATIONS
Electronic Controller The PS15TD Controller-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes protections.
Using PS15-R2 & RS15 without a properly connected PS15 TDController-R2 will result in poor sound quality
and can damage the components.
NEXO is one of the world’s leading sound Dispersion configuration After dismounting the front grille from its fixings, the HF Horn can be rotated in 4 positions for dispersion
reinforcement loudspeaker manufacturers. configuration.
Founded in 1979, the company is dedicated to Sub-bass The PS15-R2 can be used without optional RS15 Sub-bass. Active two-way operation with RS15 is included
crafting practical solutions with solid engineering. in the PS15 TDController-R2. One RS15 matches 2 x PS15-R2, additional RS15 may be used for enhanced
Each new design begins with a proprietary LF capability.
sophisticated computer simulation process that Speaker Cables PS15R2 are wired 2-/2+ on Input Speakons in Passive Mode. PS1R25 are wired LF 1-/1+ & HF 2-/2° on
allows every parameter to be extensively modeled Input Speakons in Active Mode. Please refer to RS15 User Manual for RS15 for RS15 connection.
and simulated, leading to breakthrough cost and
performance gains. NEXO’s comprehensive SHIPPING & ORDERING SPECIFICATIONS
product line includes loudspeakers, analogue and
digital control electronics and amplification; all Packaging PS15-R2 is packaged as a single product.
designed to deliver consistent sound quality and Shipping Weight & Volume 33 kg (72.6 lbs) / 0.2 cubic metres (7 cubic feet).
long term reliability for a broad range of Accessories A full selection of mounting Accessories is available, please contact your Nexo Agent for details.
applications.
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Anechoic Far Field for the PS15-R2 + PS15TDController-R2. Half-Space Anechoic radiation for the RS15R2 +
NEXO S.A. PS15TDController-R2.
Parc d’Activité [b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise.
du Pré de la Dame Jeanne Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3 dB range. Data are for speaker + processor + recommended amplifier
B.P. 5 combinations.
60128 PLAILLY Peak SPL is at clipping of recommended amplifier. Measurements made with PS15-R2s in passive operation mode.
Tel: +33 (0) 3 44 99 00 70 [c] Directivity curves & data : obtained by computer treatment on off axis response curves.
Fax: +33 (0) 3 44 99 00 30
E&OE September 2009.
e-mail: [email protected]

NEXO LatAM
C.C. No 33. Suc 49 Architectural and Engineering Specifications
Caballito (1449)
Buenos Aires The 2-way loudspeaker system shall have one 15 inch shielded Neodymium 8Ω cone transducer and a 2 inch compression driver on a low distortion
Argentina constant directivity asymmetrical dispersion horn. The system's horizontal coverage shall range from 50° to 100°, with vertical coverage of +25° and -
Tel: +54 114 432 1911 30°. The user shall be able to rotate the horn in 4 directions as required by the application. The system shall have a Q of 16 and a Directivity Index that
Fax: +54 114 431 1007 is 12 at frequencies above 1.5kHz. Nominal Sensitivity shall be 102dB (99dB wideband). When driven by a NEXO NXAMP 4x1, NXAMP 4x4 a PS15
e-mail: [email protected] TDController- R2 or by a NX242 properly connected to amplification capable of delivering 1000 to 2000 Watts into an 8Ω (nominal) load the system
shall be capable of 133dB to 136dB peak SPL, with a frequency response of 50Hz to 18kHz ±3dB (47Hz to 18Hz -6dB). The system shall include an
NEXO Asia active or passive crossover with internal switching. Electrical connections shall be made via one of the two 4-pole NL4MP SPEAKON connectors.
GPO Box 806
Hong Kong The system shall have a tuned ported multi-angle enclosure constructed of 18ply Baltic birch, finished in either black or white textured coating and
SAR China having exterior dimensions no greater than 675mm H x 434mm W x 368mm D (26.6in H x 17.1in W x 14.5in D): the system shall weigh 29.0kg
Tel: +852 9096 3472 (65.0lbs). Exterior hardware shall include 1 metal plate, 2 attachment points and 1-pole socket. Interior components shall be protected by a powder
Fax: +852 2104 3214 coated perforated steel grille. The system shall be the NEXO PS15 R2 with a PS15 TDController-R2, NXAMP 4x1, NXAMP 4x4 or NX242.
e-mail: [email protected]
LIMITED WARRANTY
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.