Datasheet
Ultrasonic level transmitter
SUP-MP-C
Committed to process automation solutions
Tel: 86-15158063876
E-mail:
[email protected] www.supmea.com
F-
Datasheet
Ultrasonic level transmitter
SUP-MP-C
Ultrasonic level meter (measurement of liquid level/material level) is a non-contact, high reliability,
cost-effective, easy-to-install and maintain liquid level/material level measuring instrument. It can meet
most liquid level/level measurement requirements without contacting the measured medium. It is a new
generation of ultrasonic level gauge with completely independent property rights of our company.
Applications
Fire water tank
Deep well water level
River reservoir
Engineering pool
Sewage/waste water
Chemical material
Features
Simple operation
Fault self-diagnosis technology, realize real-time
fault self-diagnosis
A variety of working conditions algorithm selection, Ultrasonic level meter
improve environmental adaptability;
High measurement resolution
Fast response, the fastest response time
Automatic temperature compensation
Principle
The ultrasonic wave is reflected when it meets the interface of liquid medium (solid medium) with
different density, and the transmission time is measured to measure the liquid level / distance
Parameters
Product Ultrasonic level transmitter
Model SUP-MP-C
Measure range ( 0~5 ) m / ( 0~10 ) m / ( 0~15 ) m
≤0.4m (5m、10m)
Blind zone
≤0.6m (15m)
±0.5%FS
Accuracy
±0.3%FS
Display Monochrome LCD with resolution of 128 * 64
(4 ~ 20) mA , the output accuracy is 0.2%FS
Current output Output load is (U-18V)/0.02A (U:supply voltage,2-wire)
Output load is (U-14V)/0.02A (U:supply voltage,4-wire)
Measuring variable Level/Distance
Power supply 18-28 VDC
Resolution 1mm or 0.1%FS (maximum)
Communication RS485 ( 4-wire )
Relay output 2 groups ( 4-wire optional)
Instrument: (-20~+60)ºC
Working temperature
Probe: (-20~+80)ºC
Instrument: IP65
Ingress Protection
Probe: IP68
Relative humidity (10~85)%RH (no condensation)
Language Chinese/English
Installation method Threaded installation
With display (Optional without display. Refer to 1.5 for settings
Display method
without display)
Wiring
GND
GND
GND
Secondary
instrument
4-20mA
Power
Dimension
M60×2 or G2 Thread Sensor (5m/10m)
M78×2 Thread Sensor (15m)
Ordering code
SUP-MP-C-RT1-DT1-ST1-J5-O1-D0-A2-V1 Description
Integrated Type Ultrasonic Level
SUP-MP-C - - - - - - - -
Transmitter
C 5m，G2
Measurement Range
D 10m，G2
and Thread Type
L 15m，M78×2
NS Plastic ABS
Probe Material
N6 Polytetrafluoroethylene (PTFE)
J3 0.5 Class
Accuracy
J5 0.3 Class
A1 2-Wire 4-20mA
SA 4-20mA，24VDC
SP 4-20mA + Dual SPST +RS485，24VDC
SG 4-20mA + Dual SPST，24VDC
SE 4-20mA+RS485，24VDC
SW 4-20mA + Wireless NB-IoT, 24VDC
Output and Power Supply
4-20mA + Wireless NB-IoT + Dual
SX
SPST + RS485, 24VDC
4-20mA + Wireless NB-IoT + Dual
SY
SPST，24VDC
4-20mA + Wireless NB-IoT+RS485，
SZ
24VDC
Electrical Interface, Housing Material, and M16×1.5 Cable Gland, Plastic
WB
Ingress Protection ABS，IP65
L-shaped Stainless Steel Mounting
EA
Bracket, 0.8m
L-shaped Stainless Steel Mounting
Accessories EB
Bracket, 1.5m
Polycarbonate (PC) Protective
EC
Cover
Note:When 4-wire system is used, the default display is displayed.Single current output is 2-wire system,
no RS485, no relay output
