0% found this document useful (0 votes)
2K views11 pages

TEHRI Dam

The document provides information about the Tehri Dam project in India. Some key points: 1) Tehri Dam is a 260.5m high rock-fill dam across the Bhagirathi River in Uttarakhand. It aims to generate hydropower and provide irrigation. 2) The dam impounds water from the Bhagirathi River to generate 3029 GWh of power annually and irrigate 270,000 hectares of land. 3) Construction began in 1961 and has occurred in two stages, with a total installed capacity of 2000MW once completed.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2K views11 pages

TEHRI Dam

The document provides information about the Tehri Dam project in India. Some key points: 1) Tehri Dam is a 260.5m high rock-fill dam across the Bhagirathi River in Uttarakhand. It aims to generate hydropower and provide irrigation. 2) The dam impounds water from the Bhagirathi River to generate 3029 GWh of power annually and irrigate 270,000 hectares of land. 3) Construction began in 1961 and has occurred in two stages, with a total installed capacity of 2000MW once completed.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
  • Cover Page
  • Introduction to Tehri Dam Project
  • Construction Details of the Dam
  • Geological Aspects
  • Geotechnical Appraisal
  • Controversial Aspects

TEHRI DAM

Purushottam Gupta
Int MSc Earth Sciences 4 semester

Tehri Dam Project, a prestigious hydropower cum irrigation project, is the first major attempt to harness vast hydro potential of Bhagirathi river which is fed by Gangotri Glacier. The storage project in the Bhagirathi valley in Uttarakhand Himalaya, envisages impounding of surplus monsoon water of the river for utilizing it in regulated manner for hydropower generation and irrigation. It was conceived by the officers of Geological Survey of India in 1949 and investigations were initiated in 1961.

It envisages construction of 260.5m high earth and rock-fill dam across river Bhagirathi, an underground powerhouse with 1000 MW installation and appurtenant works. The water impounded in the reservoir will be utilized to generate 3029GWH of power in a year of 90% availability. It will also provide irrigation to an additional area of 270,000 hectares of land and stabilize irrigation in the command area in Ganga Yamuna doab. This mega project of 2000MW installed capacity, envisaged construction in two stages. The stageI, is termed as Hydropower Plant (HPP) and StageII comprising a Pump Storage Plant (PSP), have an installed capacity of 1000 MW each. From inception to the year 1988, the project was executed by Irrigation Department of Uttar Pradesh and afterwards by Tehri Hydro Development Corpn. Ltd. (THDC). After commissioning of both the stages, the project will facilitate addition to the installed generating capacity in the northern grid by 2400MW which means availability of annual energy (Peaking) to the tune of 6200Million Units, ii)additional Irrigation Facilities for 2.70 Lac Hectare of land and stabilisation of existing irrigation facilities (besides above) of 6.04 Lac Hectare of land, iii) availability of 300 Cusecs (162 million gallons per day) of drinking water to meet the requirement of 40 Lac population of NCR of Delhi in addition 200 cusecs (108 million gallons per day) of drinking water for about 30 Lac population of the towns and villages of U.P. Additional benefits accruing out of the project area

development of Garhwal Region, relocation and construction of New Tehri town with the provision of all modern civic amenities, improved communication, education and health, development of horticulture, fisheries and afforestation development of local economy through promotion of ecotourism and water sports

THE DAM The main Tehri Dam is engineered earth and rock material in a unique height of 261 meter, making it the 8th tallest in the world (Figure 2). The crest width of the dam is 20 m with adequate fl atter slopes on either side giving the width of 1,128 meters at the

bottom. The length of the dam at the top is 575 meters, which is walled up in narrow gorge section of the river Bhagirathi. The dam body is filled withearth and rock material in well compacted layers. In order to retain the water, there is an impervious clay core wall on the dam body along its length, which is compacted to an unprecedented high density. In Tehri Dam this earthen core is centrally located with fl atter sloping sections and is separated from the rock-material with well-graded fi lters on both sides. Earth and rock-fi ll dams are naturally more earthquake resistant than concrete dams due to their large inertia, high degree of fl exibility, and stability. In addition, a fine sand layer is provisioned on the upstream face of the core wall that, in the unlikely event of cracking of core, sand will be washed into the cracks to seal them. The dam is safeguarded with a chute spillway and four vertical shaft spillways to discharge the probable maximum fl ood of 15,540 cumecs, which is equivalent to 10,000 year return period fl ood. . The Morning Glory type vertical shaft spillways are unique from engineering perspective that is engineered at varied elevations in addition to normal chute spillway. In case of extreme events like a monsoon cloudburst, these spillways can drain the incoming fl ood fl ow without hindrance. The Tehri Dam has an underground powerhouse with four units of Francis turbines of 250 MW each, three transformers of 306 MVA capacity and a computerized control system. The generated power from Tehri Dam is being transmitted to the national grid system through 765 kV transmission lines The religious concerns of the Tehri Dam Project were also vital in addressing challenges to uninterrupted flow of Bhagirathi river. According to Hindu mythology, the Bhagirathi river is considered as the actual Ganga, which has to fl ow continuously from Gangotri to the Ganga Sagar. To address this religious issue a team of experts was constituted, which recommended providing uninterrupted flow of Bhagirathi across the dam body. As per the decisions of expert team, the THDC made provision of continuous flow of water from upstream to downstream which is known as Aviral Dhara. A piped intake with 40 cm diameter pipe allows 35 cusecs of Bhagirathi water to fl ow across the dam body and exit at the toe of the Tehri Dam, up to Meerut

With a view to provide maximum assurance of safety, the dam has been designed adopting most stringent design criteria, incorporating certain features which would ensure its safety, in an unforeseen major seismic event. i) A very conservative design slope, with U/S slope of 2.5:1 and D/S slope of 2.0:1, as against relatively steeper slopes in some recent dams built/proposed in region of very high seismicity. ii) A very wide crest of 20m, which increases to 25m at its contact with abutments, has been provided. (iii) A very liberal free board of 9.5m above FRL has been provided to take care of any settlement, slumping due to earthquake and wave action. (iv) The D/S filter as designed is capable of preventing migration of finest particles (clay flocks) in the event of its cracking and would not permit any piping. A zone of fine (sand) filter has been provided on the U/S face, which in the unlikely event of cracking of core would get washed into cracks and seal them. (v) The dam shell material is being compacted to unprecedented high density of minimum2.36 tons/m3 to ensure little settlement, so that no pore pressure is built up during earthquakes. (vi) The dam embankment is founded directly on bedrock, after removal of all loose, semicompact overburden, thus eliminating possibility of foundation liquifaction during slaking in the event of any earthquake. (vii) The provision of access galleries at three different levels, on abutments, below dam seat and within the core to enable physical monitoring during

operation, would help taking timely

measures,

through these galleries, in the event of any distress .Diversion Tunnel - Tehri Project Upstream

1Diversion Tunnel - Tehri Project Upstream 2 Gated chute spillway and ungated shaft spillway a unique feature of Tehri Dam Project

River Bhagirathi
River Bhagirathi originates from Gangotri glacier at an altitude of 7,010 meters and traverses about 200 kilometers to its confl uence with Bhilganga, where Asias tallest Tehri Dam is walled up. The average annual fl ow of the Bhagirathi is 258 cumecs (similar to the Sunkoshi river at Pachuwaghat and Kaligandaki river at Seti Beni, in Nepal). After Tehri, the Bhagirathi traverses 30 km through Koteshwar to its confl uence with the Alaknanda at Devprayag; henceforth, the river is named the Ganga and fl ows through Rishikesh and Hardwar, major holy places for Hindus. Of the total annual water yield of 8,135 million cubic meters of Bhagirathi, about one third (i.e., 2,615 million cubic meters) is being stored in the Tehri main reservoir. The Tehri reservoir is designed to reserve the monsoon fl ow from July to September when river stages are high enough, and to utilize it to generate 6,200 GWh of energy

Geology of the area


The rocks exposed in the study belong to the Damtha, Tejam and Jaunsar Groups The Chandpur Formation is restricted towards the north by the well-defined North Almora Thrust, trending roughly northwest-southeast and dipping towards the southwest. The Deoban and the Nagthat-Bearing

Formations have a thrusted contact (the Pratapnagar Thrust), trending parallel to the North Alomra Thrust and dipping steeply towards northeast. The rocks in the intra-thrust zone and are highly fractured in [Link] reservoir area has been mapped on 1:50 000 scale to establish the lithological and structural setting. The major rock types observed in the reservoir area are phyllites, quartzites and quartzitic phyllites of the Chandpur Formation, overlain by recent colluvial and alluvial materials. Fluvial terraces are present in abundance on both sides of the River Bhagirathi and form fertile agricultural land of this region. Phyllites are exposed on each bank close to the River Bhagirathi. On the left bank, phyllites are generally weathered close to the surface and have a thin soil cover. On the right bank, old terraces are present at lower levels, and thick eluvial materials and colluvial soil cover are present on the upper levels.

The most important tectonic feature in the vicinity of the Tehri dam site is moderate to steep dipping Srinagar thrust (N60oWS600E), exposed at a distance of about 5km N N E of the dam site. This tectonic surface which, at places, is displaced by transverse faults, has a regional continuity of more than 100km. Srinagar thrust is displaced for about 500m by a transverse fault, Dewal tear (N60oE S600W), near Dewal village in Bhilangana valley.

GEOTECHNICAL APPRAISSAL OF TEHRI DAM SITE:

The entire catchment area of the dam is mountainous terrain and forms parts of the Himalayan mountain ranges. It measures about 7691 km 2 out of which about 2735 km2 is snow bound. The area is hilly with heights varying from 350 m 7000m. Due to weak formations of rocks (owing to the presence of folds, fractures etc.) generally steep slopes and erosion of toe destabilize causing landslides. These are mostly susceptible to erosion and the surface runoff, on its may to plains have made deep gullies. The catchment area has steep valley slopes. Due to topographical features of the catchment development activities, deforestation, overgrazing and terrace cultivation, the rate of soil erosion in the area is more, which will lead to a higher rate of siltation

Even though the Tehri dam may be regarded to be located in a moderate region as regards to the seismic activity is concerned, the area 20 km NE has been registering appreciable seismicity. This may not only result in decrease of the storage capacity created but also may lead to loss of stability of numerous villages. If the reservoir level happens to be at its maximum, very high surges are likely which may result in endangering the stability of the Tehri dam. The oceanic apron of the Indian plate continued to dive beneath Tibet until the collision of its continental crust with the later and which now behaves like a rigid zone. Because' of this, the entire region is under compression and effect of pore pressure due to impounding of water would be to reduce the effective compressive stress. Impounding of water in this region would have the effect of delaying fracture and the apprehension of the RIS is NOT real.

Controversial Aspects
The soil on the upper slopes is unstable and grouting can only take care of surface problems. The volume of water envisaged (maximum of 15540 cusecs) would further weaken the slopes and affect the dams life span. THDC has assumed the dams life span to be 150 years, while independent experts say 50 years. The catchment area management by the forest department has been entrusted with planting trees to bind the soil. The department is alleged to have failed in doing its job despite huge amounts of money given to them. Shoor Vir Singh Sajwan, Minister of Irrigation agrees with this allegation. However the Principal Conservator of Forests, Uttaranchal, M M Harbola claims that thought the catchment area is about 7 lakh hectares, the forest department was entrusted with the task of greening 52000 odd hectares of which 44000 hectares had already been covered. 39 villages of 3355 families will be totally submerged along with Tehri town while 72 villages with about 2074 families will be partially submerged. According to an NGO Matu, the project affects around 125 villages of which 86 will be partially submerged. This number of fully and partially affected villages may increase since a fresh survey of the rim area has been commissioned. Many villages are located in the unstable rim area, including villages like Khola, Kangsali and Jawalgaon.

Common questions

Powered by AI

The Tehri Dam project aims to balance regional development with environmental and social impacts by facilitating economic growth, cultural preservation, and resource management. It promotes regional development by generating 6,200 GWh of energy annually, providing irrigation to 270,000 hectares, and contributing to stable water supply for NCR of Delhi and towns in U.P. . The construction includes relocation initiatives, such as the development of New Tehri town with modern amenities, improving the local economy through enhanced infrastructure and tourism opportunities, including ecotourism and water sports . Social impacts involve the displacement of communities, with 39 villages and Tehri town totally submerged, necessitating resettlement strategies and compensation which have been contentious . Environmental impacts include catchment area management with greening tasks aimed to reduce erosion, although criticized for not meeting expectations . The provision of 'Aviral Dhara' ensures the religious significance of the Bhagirathi river is respected, allowing a continuous flow to meet religious beliefs .

The Tehri Dam's construction incorporates multiple design features to address seismic risks. These include a foundation directly on bedrock, eliminating risks of liquefaction during seismic events . Its embankment material is compacted to a high density of at least 2.36 tons/m³ to minimize settlement and pore pressure build-up . The structure also features a wide crest and a liberal free board, which are crucial in maintaining stability during seismic-induced slumping . The dam’s earth and rock-fill construction increases flexibility and resistance to earthquakes compared to more rigid concrete dams . Additionally, access galleries provide the infrastructure needed for continuous monitoring and timely interventions . Lastly, its design includes reinforced slopes and strategic material placement to mitigate landslides resultant from earthquake activities, all crucial in ensuring structural resilience .

The Tehri Dam incorporates several engineering features and safety measures to mitigate seismic and hydrological challenges. The dam is designed with a conservative slope, using a 2.5:1 upstream and 2.0:1 downstream slope, and a wide crest of 20m that increases to 25m at the abutments . It incorporates an impervious clay core wall and fine sand layer on the upstream face, which in the case of cracks, will wash into them to seal them . Several spillways, including unique Morning Glory type vertical shaft spillways, handle the probable maximum flood of 15,540 cumecs . The dam's earthen and rock-fill structure offers flexibility and inertia, making it inherently earthquake resistant . Additionally, a free board of 9.5m is provided, alongside well-compacted shell material to prevent settlement . Access galleries at different levels allow for monitoring and corrective measures in case of distress .

Geological and tectonic considerations have been critical in the site selection and construction of the Tehri Dam due to the complex geological setup and seismic activity. The dam is located in a region with significant thrust faults like the Srinagar thrust and Dewal tear, indicative of high tectonic activity . These features necessitated a design that accounted for slope stability and potential landslides, utilizing meticulous geological mapping to manage risk . The bedrock foundation minimizes the risk of liquefaction, with high-density compaction of dam materials enhancing structural stability during seismic events . Despite seismicity concerns in the broader region, the design aims to preclude risks associated with Reservoir Induced Seismicity by ensuring robust earth and rock-fill construction . Geological challenges like rock fractures and weak formations have been addressed by extensive engineering measures, though critiques about dam life span and environmental management persist .

The key hydroelectric components of the Tehri Dam include an underground powerhouse with four Francis turbines, each with 250 MW capacity, and three transformers with 306 MVA capacity . These turbines convert the hydraulic potential energy of water into mechanical energy, which is then transformed into electrical energy by the generators. The transformers are essential for voltage regulation, enabling the effective transmission of generated electricity . The generated electricity is transmitted to the national grid system through 765 kV high-voltage transmission lines, which facilitate efficient long-distance power distribution by minimizing energy loss . These components are integral to ensuring the reliability of power supply, enhancing the northern grid’s capacity, and supporting peak-load energy demands effectively .

The Tehri Dam facilitates power generation and water management through its dual-stage construction. Stage-I and Stage-II, with capacities of 1000 MW each, use monsoon surplus water for hydroelectric power generation, producing up to 3029 GWh of energy annually . In addition to energy benefits, the dam provides irrigation for 270,000 additional hectares in the region and stabilizes existing irrigation facilities for 604,000 hectares in the Ganga Yamuna doab . The water management aspect extends to the supply of drinking water, facilitating 300 cusecs daily to the NCR of Delhi and 200 cusecs to towns in Uttar Pradesh, significantly supporting regional water availability . By impounding and releasing water strategically, the dam helps mitigate seasonal fluctuations in river flow, supporting both agricultural and urban water needs securely and sustainably .

The Tehri Dam contributes to the regional economy of the Garhwal region through several channels. It promotes local development with infrastructure improvements, such as modern civic amenities in New Tehri town, thereby fostering economic growth and enhancing quality of life . Energy production from the dam helps stabilize the energy supply, facilitating industrial activities and regional economic stability . Moreover, the project supports agriculture by providing reliable irrigation systems, expanding agricultural productivity and food security in the region . The dam's presence boosts tourism potential, with ecotourism and water sports as areas of development, further contributing to the economic diversification and resilience of the region . Such initiatives also create local employment opportunities, thereby contributing significantly to the economic upliftment of the Garhwal region .

The Tehri Dam's environmental impacts involve significant ecological and sedimentation concerns. Ecologically, the creation of the reservoir has altered the natural river ecosystems, affecting local biodiversity and aquatic habitats . The project has led to deforestation and changes in land use patterns, increasing soil erosion and affecting the catchment's ecological balance . Sedimentation poses a substantial challenge, given the high rates of soil erosion due to steep valley slopes and human activities like deforestation and overgrazing . This has led to increased siltation rates, which can reduce the dam's storage capacity over time, emphasizing concerns regarding its operational efficiency and sustainability . Despite greening efforts by the forest department to control erosion, there have been allegations of inadequate outcomes, further raising sustainability issues . These environmental aspects highlight the need for adaptive management strategies to mitigate adverse impacts and enhance the dam's lifespan and ecological harmony .

The Tehri Dam project has resulted in socio-economic challenges primarily related to displacement and resettlement. The project led to the total submergence of 39 villages and Tehri town, impacting 3,355 families, while 72 additional villages with 2,074 families experienced partial submersion . Concerns arise from the prolonged resettlement processes and inadequate compensation, with some NGOs asserting that 125 villages are affected, including potential increases due to rim area surveys . Critics highlight that the dam-induced changes disrupt traditional lifestyles, compounding socio-cultural adjustments for affected communities . The impacts of displacement include loss of homes, livelihoods, and community ties, with insufficiently planned resettlement potentially leading to economic hardship and social dislocation, emphasizing the need for comprehensive, inclusive resettlement strategies .

The Tehri Dam addresses religious and cultural concerns regarding the Bhagirathi river by ensuring the continuous flow of water, respecting its sacred status in Hindu mythology as the Ganga. This continuous flow, known as 'Aviral Dhara,' is facilitated by a 40 cm diameter piped intake, allowing 35 cusecs of water to flow across the dam body . This measure respects the spiritual and cultural beliefs associated with the uninterrupted flow of the river from Gangotri to the Ganga Sagar, addressing concerns from religious communities and stakeholders . By maintaining this flow, the project not only adheres to cultural expectations but also integrates modern engineering solutions with traditional values, thus fostering cultural harmony with infrastructural development .

You might also like