PRODUCT DATA SHEET
SikaFume® SF 100
Densified microsilica.
DESCRIPTION FEATURES
SikaFume® SF 100 is a compacted microsilica mineral ▪ Greater cohesiveness of the mixture.
admixture, formulated to produce extremely strong ▪ Less exudation.
and durable concrete. SikaFume® SF 100 is a micro- ▪ Improved performance.
filler material that physically fills the spaces between ▪ Increase in the service life of the structure.
cement particles; It drastically decreases permeability ▪ Greater development of mechanical resistance.
and reduces the size and number of capillaries that al- ▪ Greater modulus of elasticity.
low contaminants to enter the matrix. ▪ Lower permeability increasing durability.
▪ Greater resistance to sulfate attack.
USES ▪ Greater resistance to the alkali-silica reaction.
▪ Steel-reinforced concrete structures or wet shotcrete CERTIFICATES AND TEST REPORTS
applications, exposed to de-icing salts or sea salts
carried by the wind. SikaFume® SF 100 meets the requirements of ASTM C
▪ Any construction project that requires the protection 1240, Standard Specification for Microsilica Used in
provided by highly durable, low permeability con- Concrete and Hydraulic Cement Mortar.
crete.
▪ Projects that require high resistance (high perform-
ance) concrete.
PRODUCT INFORMATION
Packaging 20 kg bag.
Shelf life 12 months from the date of manufacture. Depending on storage condi-
tions, the shelf life may be longer than stipulated. Please contact your
sales representative for recommendations regarding proper use and
dosage in the event that SikaFume® SF 100 has exceeded the shelf life.
Storage conditions SikaFume® SF 100 is stored, handled and dosed similar to cement or fly
ash. It can be stored in silos when in bulk. The packaged product should be
stored in a dry area avoiding moisture.
Total chloride ion content Does not contain chlorides. SikaFume® SF 100 admixture will not initiate or
promote corrosion of reinforcing steel embedded in concrete, in
prestressed concrete or concrete placed in galvanized steel roof and floor
systems. No calcium chloride or intentionally added chloride-based in-
gredients have been added in the manufacture of SikaFume® SF 100.
Product Data Sheet
SikaFume® SF 100
March 2025, Version 03.01
021403000000002082
1/2
APPLICATION INFORMATION
Recommended dosage It is recommended to use SikaFume® SF 100 for concrete or wet shotcrete
applications in a dosage range of 5% to 15% by weight of cementitious ma-
terial.
Compatibility SikaFume® SF 100 additive can be used with portland cements approved
under ASTM, AASHTO or CRD specifications. It is compatible with most
concrete admixtures, including all Sika® admixtures. The use of SikaFume®
SF 100 is recommended with high range water reducing admixtures, such
as the Viscocrete® line, to obtain maximum workability, keeping the water-
cement ratio low.
Dispensing SikaFume® SF 100 is dosed and added in the concrete production plant in a
similar way to cement or other cementitious materials such as fly ash. It
can be dosed in a central mixer or mixer truck.
SYSTEM INFORMATION
System structure SikaFume® SF 100 is a micro-filler material that physically fills the spaces
between cement particles; It drastically decreases permeability and re-
duces the size and number of capillaries that allow contaminants to enter
the matrix. Compared to pozzolan, SikaFume® SF 100 microsilica reacts
chemically within the cement matrix to increase the amount of hydrated
calcium silicate (CSH gel) that is formed. CSH gel is the adhesion agent that
holds the matrix of a cementitious mixture together in its hardened state.
Additional CSH gel increases strength and decreases permeability.
BASIS OF PRODUCT DATA LEGAL NOTES
All technical data stated in this Data Sheet are based The information, and, in particular, the recommenda-
on laboratory tests. Actual measured data may vary tions relating to the application and end-use of Sika
due to circumstances beyond our control. products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
ECOLOGY, HEALTH AND SAFETY properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
APPLICATION INSTRUCTIONS strates and actual site conditions are such that no war-
MIXING ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
SikaFume® SF 100 is dosed and added in the concrete legal relationship whatsoever, can be inferred either
production plant in a similar way to cement or other from this information, or from any written recom-
cementitious materials such as fly ash. It can be dosed mendations, or from any other advice offered. The
in a central mixer or mixer truck. user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
will be supplied on request.
Sika Gulf B.S.C. (c) Sika UAE LLC Sika Saudi Arabia Limited Sika LLC - Oman
Tel: +973 177 38188 Sika MB Construction Chemicals LLC Sika Construction Chemicals for Sika MB LLC
Email: [email protected] Sika International Chemicals LLC Manufacturing LLC Tel. +968 22 826 500
Sika Kuwait Cons. Mat. & Paints Co WLL Tel: +971 4 439 8200 Riyadh / Jeddah / Dammam / Rabigh Email: [email protected]
Tel: +965 22 282 296 Email: [email protected] Tel: +966 9200 22167 Web: gcc.sika.com
Email: [email protected] Web: gcc.sika.com Email: [email protected]
Web: gcc.sika.com Web: gcc.sika.com
SikaFumeSF100-en-AE-(03-2025)-3-1.pdf
Product Data Sheet
SikaFume® SF 100
March 2025, Version 03.01
021403000000002082
2/2
